Wireless Stops Working After 30 Mins?
May 2, 2012I've got the same problem on my wife's Acer One 532h. Did it get resolved for you, Adrian and if so, how?
View 5 Replies
ADVERTISEMENT
Network Stops Working For 2 Mins When Laptop Joins Network?
Jan 27, 2013We have a working home network with 4 pcs connected to the network. 3 via ethernet and 1 via wireless. Everything is working fine. Then we have 2 more laptops which are connecting via wireless. When either of those 2 laptops joins the network, the whole network stops working for a minute or 2. After that it starts working again for everybody (including those 2 laptops). However its super annoying when it does that all the time. (The laptop goes into sleep mode, when u turn it back on again the internet(and the whole network) stops working for awhile again..).
View 2 Replies View RelatedInternet Stops After 10 Mins To An Hour?
Sep 16, 2011My internet stops approx in 10 min fo start of pc to an hour at times.Am not able to connect to router too.I have a wireless router and the PC is connected with a wire.The internet is not at fault as I can use the router @ laptop.Was on windows 7 Ultimate and all was working finer till 2 days ago. I thought May be I shoudl do a reinstall and installed my old and trusted win xp.Still its here. The win xp is completely updated and up to mark. I cannot even connect to the router 192 address when the internet stops.I have already changed dns to open dns. I remember that in windows 7 it used to show some dns /ip error , when I woudl trouble shoot at times and thus using open dns on router. Nothing working, and am going mad[CODE]
View 14 Replies View RelatedWireless For Laptop Sometimes Stops Working?
Mar 8, 2013I have a Asus n55s. The wireless acts very funky. It sometimes disconnects and stops working. Sometimes, it will stop detecting any nearby wireless networks altogether. Then I have to enable and disable the wireless functionality until it starts seeing nearby wireless networks.
View 9 Replies View RelatedD-Link DIR-655 :: Wireless Stops Working?
Mar 22, 2012Once every couple of days the wireless service seems to disappear. I've connected to the router from a wired computer and everything looks ok from the d-link panel, however its not showing up as an available wireless network on the wireless units. Pulling the power off for 30 seconds tends to get it working again. I'm configured bg and n. I need a mix... an old B laptop, have one machine that has a G NIC, and the rest are N.
View 14 Replies View RelatedWireless Adapter Stops Working Intermittently?
Jul 17, 2011I have a problem with a wireless adaptor on a Toshiba Tecra (A11-1EE - PTSE0E-065052EN) running Windows 7.The wireless adaptor works fine but every now and again it will just stop working. The operating system says that the adaptor is turned off but it isn't. I've checked the driver but it is up to date.I have to disable the driver and then enable it again and then the adaptor begins to work correctly again.
View 4 Replies View RelatedD-Link DIR-825 :: DIR-835 - Wireless Stops Working With Some Clients
Nov 11, 2012There were 6 computers on the 2.4GHz band, and 2 on the 5GHz.Everytime the people on the 2.4GHz band would get disconnected for no reason, but this router should be able to handle that number easily. After lots of fiddling, like telling people to shut down their phones WiFi, I finally found the culprit:
N and G mixed mode
Even with only Wireless-N devices there would be problems. N-only mode worked well.That is unpractical for me as there are some devices here that are still on Wireless-G, like game consoles and some phones.
Connected To Wireless Router But Internet Stops Working
Jan 29, 2013I can no longer browse through any browser, or update any programs (even though I am still connected to my wireless router). I have already done a Refresh, but the problem persists
View 2 Replies View RelatedWireless Internet Stops Working / Attempts To Repair
Oct 16, 2011Wireless internet connection stops working after anywhere from 10 minutes to two hours, a message pops up telling me it is "impossible to connect to my preferred wireless network", and then it fails to detect any wireless connections at all. The strangest thing is that when I try to "repair" the connection, which used to work, the computer immediately shuts down and restarts itself. It also seems like when I attempt to download something, like a movie for example, the connection fails right away, while if I'm just surfing the web it usually lasts around an hour before stopping. And when I restart the computer again it works perfectly fine at first, like right now, but eventually does the same thing.
View 9 Replies View RelatedWRT54G / Wireless Stops Working When Desktop Powered On
Jan 24, 2013Background info:
Comcast cable internet and TV
Regular modem
Linksys WRT54G router
Windows7 desktop
The problem I'm seeing is that our wireless connection cuts out about 5 minutes after turning on our main desktop. Turn off the main desktop and wireless begins to work again. Throughout all of this, the wired connection works fine, and I have no problem connecting to the router either.
Wireless :: When Desktop Is Online Via Ethernet / WiFi Stops Working
May 27, 2012When my desktop is online via Ethernet, wi-fi stops working. A signal is detected, but is very unstable and often doesn't connect to the Internet at all, on any device. As soon as the desktop is no longer trying to access the Internet, all other wireless connections work without a problem. Base computer is Windows Vista Home Premium with all latest updates installed.Other connections include 2 laptops (one Win7, one PCLinuxOS), 2 Kindle Fire, Wii, iPod Touch, four cell phones, and Sony Media Player. They're never running all at once. But any number of them can run fine-- as long as the desktop isn't online at the time.
View 1 Replies View RelatedCabling / Cards :: 802.11 B/g USB Wireless Adapter Randomly Stops Working
Sep 3, 2012I've been using an 802.11 b/g USB wireless network adapter card with my computer to use in conjunction with an AT&T 2Wire router,which is about 20 or 30 feet away off in another room.After about 10 minutes on average, the adapter will stop transferring data suddenly, and it will stay that way for a while. If I do nothing, then sometimes it will start up again after several more minutes, but instead of waiting, I usually will select "Repair" from the Wireless Network Connection pop-up menu, which also works to get it started again. The problem though, naturally, is that after another little while, like about 10 minutes again, it will short out all over again. Sometimes, very rarely, it will stay working for up to maybe an hour, and sometimes, it can short out yet again within a few seconds.
View 9 Replies View RelatedE2500 - Wireless Router Stops Working When Neighbor Uses Internet?
Jul 4, 2012We use our internet to watch Netflix. We have had no problems until recently, I called the satellite Internet company(which is a local co.) they told me my router was going out. I bought a new one, problem solved! Right?!? WRONG my husband told me my neighbor just got Internet and has been playing Xbox everyday which coincidently is between the 5:30pm to 10ish pm we have been having issues with our router. What can we do to fix this? Do I have to buy a bigger router? He is not stealing off mine because it is password protected that was changed when new router was setup and programmed. I have been running of a Cisco Linksys E2500 advanced dual band n router. The router is in the same room as the TV accessing it, which we previously had no issue connecting anywhere in the house or garage.
View 1 Replies View RelatedLinksys Wireless Router :: E3200 Suddenly Stops Working?
Jul 30, 2012A few days ago, my Linksys E3200 router stopped working suddenly for no reason. The SSID was still broadcasted for a few days, but no internet connection. Today the SSID does not broadcast at all and I seemingly have no access to it.I tried power cycling it.I tried reconfiguring it via the CD included in the box.I tried solving it with the wireless tools in Windows.
View 2 Replies View RelatedLinksys Wireless Router :: E4200 Stops Working Randomly?
Oct 5, 2011I just bought the E4200 routher at best buy a few weeks ago. I got it all setup how I want it. Its been working fine then about a day ago it started to stop working at random. All internet just stops working. Wired and Wifi. I have to either wait for it to work again or restart the router.
View 7 Replies View RelatedLinksys Wireless Router :: E1000 Stops Working Every Few Hours
Oct 21, 2011I have a Cisco Linksys E1000 wireless router. It has been working perfectly for the last few months until yesterday when I noticed none of my wireless devices could connect. The SSID was still being broadcast and my computers that were connected through an ethernet cable were still able to access the internet fine. Eventually I pressed the red reset button on the back of the router, which reset my router name, password, etc. I set everything back up and was able to connect again. Several hours later the wireless stopped working again. When I launched the Cisco Connect software I was prompted to update some software (possibly the router firmware) so I did that. After that I was able to connect to wireless again. This morning I woke up and wireless was not working again. This time I changed the password for the router and then I was able to connect to wireless again. I tried to change the router password back to the original password and I couldn't connect anymore. When I changed the router password back to the new password I could connect again.
View 1 Replies View RelatedCisco Wireless :: 2.4 GHz Wi-Fi Connection - E4200 Router Stops Working
Oct 1, 2012My wireless connection for 2,4 GHz stopped working correctly. Here's the set up:
I have an E4200 Linksys router. Furthermore I have a desktop running on Windows7 connected to the router with a wire. No problem there. I can connect to the Intenet via the E4200 and a modem.Then I have a notebook also running on Windows7. Until yesterday it was wireless (2,4 GHz) connected to the router and to the Internet, but now I can see the router on the networklist (so there is connection), but it will not make contact to the Internet. If I hook up the notebook with a line to the router it works OK.Then I have an iPad which makes a wireless connection to the Internet (via the router) for the 5 GHz option, but it does not make a connection with the 2,4 GHz option anymore (before yesterday this worked well). I did not change any settings on the Linksys or other network options, Can an update from McAfee make a difference (only for 2,4 GHz?).
Wireless :: Connection Stops Working And Icon Losses On Laptop Dv 2000?
Oct 20, 2011wireless connection stop working and icon lossed on hp laptop dv 2000
View 1 Replies View RelatedLinksys Wireless Router :: Port Forwarding Stops Working WRT400N?
Jan 16, 2010Having a problem with port forwarding on their WRT400N? I'm forwarding one service (https) and this stops working if it's not accessed after a 10 days or so. The only way to get it to work again is to reboot the router. I’m running the “latest" firmware, which is an oxymoron considering it's been over 12 MONTHS since Linksys updated the code... Which is appalling considering this appears to be their flagship wireless N router.
View 5 Replies View RelatedLinksys Wireless Router :: E4200 Internet Stops Working With All My Computers
Feb 3, 2013I'm having a bit of trouble with my e4200, It keeps on "dropping" connection, and by dropping I mean it constantly around 3-5 minutes the internet stops working with all my computers, it's connected by wifi with 2 PC's, and 1 PC is wired with an ethernet cable, and I also have 2 mobile devices connected at it. The internet would start working again within 30s, to 1m, but that it drops soon.Methods I've done to fix it:
-Updated firmware to the latest one
-Set the MTU to 1400
-Reset it, (30 second press)
-Rebooted, (Cooled down, doesn't really run hot just a little warm)
-Restored to factore defaults
Linksys Wireless Router :: E1200 System Suddenly Stops Working?
Oct 30, 2012Right now I have my computer (iMac early 2012 summer purchase) plugged directly into the wall via ethernet cable for internet access. I have only begun doing this in the past week because my E1200 wireless router has stopped working properly. I have reinstalled and reset to factory settings and set up with Cisco Connect and setup manually over the past week troubleshooting every possible way I have ever known how. My internet, obviously, is working. And when I set up the wireless network it connects properly and obtains an IP address and the lights on the back of the unit light up correspondingly and correct. But I cannot connect to the internet via the router, wirelessly or plugged directly into it. Yet when I take the internet cable and plug it straight into my computer it works.Mainly just need to know if this can be fixed or if I need to go return this unit and get a replacement. The router was purchased two months ago and has not had any issues since I first set it up until a couple of weeks ago and my phone is using up all of my cellular data plan without being connected to my wi-fi...
View 1 Replies View RelatedDell :: Wireless Suddenly Stops Working On Studio 1557 Laptop
Feb 25, 2010I have a Studio 1557 laptop (purchased in late December 2009) that all of a sudden has lost wireless connection to the internet. Went to use it last night (Thursday) for normal use and no wireless connection at all. Before this issue, there were no problems connecting thru wireless at all...in fact used it Wednesday evening for work/surfing and no problems whatsoever. We are using a Linksys 160N router...have 2 other computers and 2 iPod Touches that are connecting just fine, absolutely no problems. It can connect thru a wired connection with no problems but nothing thru wireless...this is a fairly new router, about 10 days old, but haven't had any issues with it since set-up.
I didn't have much of a chance to do anything about this last night or this morning. I really don't want to bother calling Dell Support either.
Dell Studio 1557 Windows 7 64-bit, 8gb 1066Mhz, 320HD
Cisco Wireless :: 2960G / AIR-AP1142N-E-K9 Ethernet Interface Stops Working?
May 13, 2012I installed two AIR-AP1142N-E-K9 access points, running a fairly simple config, WPA2 PSK, with AES cipher, both the same SSID.The two access points are connected to Cisco 2960G switches, which are in turn connected to each other, again without any fancy config options, no VLAN's ed.
After a random while, varying from 30 minutes to 15 hours, the access points will stop sending/recieving traffic on the ethernet interface.The units don't stop at the same moment, this also varies seemingly random. It's not related to load or the amount of clients (1 to 15).Only turning on one unit doesn't make any difference.
The units keep sending out their SSID, you can associate to them, but the DHCP requests aren't passed on to the DHCP server which is connected to one of the 2960G's.If you wirelessly connect to the AP and set a manual IP adress you can reach the webinterface and telnet/ssh to the access point. The ethernet link is reported as being up on the access point. Also the switch reports a link on the port to which the access point is connected.Resetting the link does have no effect. The log doesn't mention any errors or warnings.Power cycling or reloading the access point will put it back in working order for a varying amount of time.
Access point version:
Cisco IOS Software, C1140 Software (C1140-K9W7-M), Version 12.4(21a)JA1, RELEASE SOFTWARE (fc1)
Access point config:
!
! Last configuration change at 14:41:40 +0100 Sat May 12 2012 by admin
! NVRAM config last updated at 14:41:40 +0100 Sat May 12 2012 by admin
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
[code]...
Linksys Wireless Router :: E3500 No Connection Loss But Wifi Stops Working?
Mar 9, 2013I've tried all sorts of settings, and I'm still holding out that its a setting possibly, but I have a E3500 and devices on both 5Ghz and 2.4Ghz... Most of them, probably when idle, seem to stop working over WIfi. They still have decent connection, but every internet related request just times out. Disable and reinable the wifi and it works great again.
Could this be defective wifi radios? or could it really be interference? I have it happening on multiple devices. Also, I'm not far away from the router when it occurs, and when I reconnect, it seems to work just fine for a while. Basically the big problem is on the cell phones and tablets because I'll miss notifications... I'll turn off the wifi and turn it back on when I use the device next, then a flood of notifications will come in. Again, it's not just a phone thing, tablets and laptops have the same problem, that's just the main reason I want it fixed.
TP-Link 300Mbps Wireless :: TL-WR1043ND Stops Working Randomly And Requires Power Recycle
Dec 3, 2012Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version :
ISP :
Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 120405 rel 33996n
ISP : Verizon Fios
(My router says Version 1.9).Had this router about a month. It works fine. Using it in Wireless mode wpa2 security. Get excellent speeds. HOWEVER> It freqently drops connectivity and fails to allow wireless clients to connect at all. (You can see the SSID via wireless clients, but not connect to it). To restore it, I have to disconnect from Power, wait a moment, then reconnect to power. It recycles and connections are working again with no problems (UNTIL NEXT TIME). Seems to happen every few days.
I checked the web site and I appear to have the most current firmware.I have a Trendnet router on different channels in another part of the house which has never had this problem. I disconnected it to test if it was somehow involved, but the TP-Link router had same symptoms when it (trendnet) was not connected. Our Actiontec Router (VERIZON provides this as base connectin to them serving the Cable TV DVRs also) ) has its wireless disabled and is the DHCP server provider to the home network. DHCP is disabled on the TP Link.
Linksys Wireless Router :: WRT120N - Internet Disconnected About 20 Or More Mins?
Aug 4, 2011I'm tired of posting again and again, internet drops for about 20 or more mins, and can't get it back via reset, release & renew ip, system reboot.
View 1 Replies View RelatedCisco WAN :: 876 - Nat Stops Working After 30 To 60 Sec?
Apr 24, 2013i have a 876 Router, connected to the Internet and a VPN. From inside i would like to pass all traffic destinied to 192.168.0.0 255.255.255.0 to the VirtualPPP IF and al the other to the Internet (vlan2) I have created this rule, but after applying ist works only for about 30 to 60 seconds. after that only the Internet reachable. Everytime i do a clear ip nat trans * both Interfaces will work für 30 to 60 secs again...
This is the relevant part of the cfg
ip nat inside source route-map Di1 interface Virtual-PPP1 overload
ip nat inside source route-map VLAN1 interface Vlan2 overload
!
access-list 1 remark CCP_ACL Category=2
[Code].....
Laptop's Wifi Stops Working
Feb 5, 2013I've been having this problem with my laptop's wifi for a while now and it's been getting a little out of hand lately that I can't deal with it anymore. I asked some friends and they seem to have the same problem too but not nearly as often as I do. Every so often, my laptop's wifi just stops working so I turn it off and then turn it back on and it starts working again. My friend says it happens very rarely to him but for me just today it happened 2 times within 10 minutes
View 7 Replies View RelatedAfter Few Hours The Tcp / Ip Protocol Stops Working
Oct 14, 2011I'm having is that every few hours my TCP/IP protocol stops working. The modem lights remain normal but I can't connect to anything. The only thing that works on the internet is traceroutes at the command prompt which function normally. The solution is that I have to reboot and then everything returns to normal until a few hours later when it happens again. There are no error messages on any of my browsers. The page just goes white immediately. When I try to retrieve my email, I get a message about the TCP/IP isn't working.
View 9 Replies View RelatedNIC Stops Working When Hosting A Server?
Mar 23, 2011On Windows XP, my integrated NIC stops working after hosting a server. The server starts fine, ports are forwarded, firewall is down, modem is fine, but when I receive a connection, it shows they have made a connection, but then they drop, as do I. I can't browse or ping anywhere. I have to physically disconnect, then reconnect the ethernet cable to the port, or restart the computer. Upon ipconfig, the adapter is set with the Windows default ip (169.x.x.x) and cannot be /release'd or /renew'd.
View 10 Replies View RelatedInternet Becomes Very Slow Or Stops Working?
Mar 4, 2012It's fairly hard to explain what happens but basically, say I'm playing some type of online game, all of a sudden anything server sided such as HP amounts, damage amounts, etc. just disappears but the animation runs fine such as attacking being hit, etc. All of a sudden it'll jump forwards and I'll take any damage and do any damage that had been happening until the issue started. This happens constantly and it's really frustrating but on top of that my internet will slow to a crawl..Say I'm trying to send a message on Skype, it won't send for the longest time and I won't be able to recieve any or even open a new webpage until the problem fixes itself.'ve looked around a bit and thought I fixed the issue, I'm on wifi and multiple devices are connected but not always in use, and the forum I found suggested an ip conflict and said to open up command prompt release the ip with ipconfig /release and then renew it with ipconfig /renew.
View 3 Replies View RelatedWNDR3700 Internet Stops Working
May 2, 2011After buying a new WNDR370. Sporadically and seemingly without any cause my internet will stop working. Diagnostic will always report it as "DNS Server is not responding." I've also discovered that if I enter my router settings and even just switch the DNS settings from Auto to manual or vice versa the problem corrects itself instantly-then next time it happens I just need to do it again.
I've already tried resetting my entire network and rebuilding the recommended way. Modem, Router, then computers-connecting each only after the prior has finished initializing. Hasn't worked though.
Currently I have my main rig connected directly to the modem to try and find out if I experience the problem at all this way, this is a pain in the ass though, and I don't know when long enough is long enough as the issue is completely random and simply just may not happen.
Cisco :: Asa5010 Interface Stops Working?
Mar 5, 2012I have a cisco asa 5010 where, during the process of configuring, the outside ports become down/down. The /0 port won't even reactivate after cycling power on the unit.Port /1 is the inside interface and it is not affected by the problems.I switched the outside port to port /3 and it worked for awhile then it stopped working. I switched it to Port /2 and the same thing.Port /2 and Port /3 are on after a power recycle but shut down completely (down/down) during the reconfiguration. It seems like a hardware failure, but I'm wondering if it could be anything else.
View 4 Replies View Related