Once every couple of days the wireless service seems to disappear. I've connected to the router from a wired computer and everything looks ok from the d-link panel, however its not showing up as an available wireless network on the wireless units. Pulling the power off for 30 seconds tends to get it working again. I'm configured bg and n. I need a mix... an old B laptop, have one machine that has a G NIC, and the rest are N.
View 14 Replies
There were 6 computers on the 2.4GHz band, and 2 on the 5GHz.Everytime the people on the 2.4GHz band would get disconnected for no reason, but this router should be able to handle that number easily. After lots of fiddling, like telling people to shut down their phones WiFi, I finally found the culprit:
N and G mixed mode
Even with only Wireless-N devices there would be problems. N-only mode worked well.That is unpractical for me as there are some devices here that are still on Wireless-G, like game consoles and some phones.
Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version :
ISP :
Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 120405 rel 33996n
ISP : Verizon Fios
(My router says Version 1.9).Had this router about a month. It works fine. Using it in Wireless mode wpa2 security. Get excellent speeds. HOWEVER> It freqently drops connectivity and fails to allow wireless clients to connect at all. (You can see the SSID via wireless clients, but not connect to it). To restore it, I have to disconnect from Power, wait a moment, then reconnect to power. It recycles and connections are working again with no problems (UNTIL NEXT TIME). Seems to happen every few days.
I checked the web site and I appear to have the most current firmware.I have a Trendnet router on different channels in another part of the house which has never had this problem. I disconnected it to test if it was somehow involved, but the TP-Link router had same symptoms when it (trendnet) was not connected. Our Actiontec Router (VERIZON provides this as base connectin to them serving the Cable TV DVRs also) ) has its wireless disabled and is the DHCP server provider to the home network. DHCP is disabled on the TP Link.
I bought this router and ever since my internet connection will drop out for 5 minutes at a time then come back in. This happens on both wifi and the wired connection. The weird part about it is that if there is a program that maintains a constant connection, e.g. xbox live or an online MMO, they don't lose connection when every other device or even tabs within the same browser all lose connection.
BTW It's the REV_B with the 2.07 firmware.
My D-Link DIR-655 will no longer let me pull up any web pages after several hours. For example, it works great when first rebooted, but the next morning web pages have timed out. When it is broken, I'm unable to connect to web pages via another wireless access point that i've plugged into the D-Link. I'm unable to use any of the wireless PCs or devices in my house.After it's rebooted, it works well for at least a few hours. It has the latest firmware and has basic, out of the box settings.
View 14 Replies View RelatedI have a DIR-655 with both wired and wireless connections. Yesterday, network stopped working on one wired machine while using it to surf the internet and a 2nd wired machine has not worked in 3 weeks after moving it from one room to another. Wireless connections are working fine.
-2 wired systems (Windows 7 and Windows XP), both stopped working
-2 wired Xboxes - working fine
-2 laptops, wireless working fine
-1 smart phone, wireless working fine
I've power cycled my DSL modem and DIR-655 multiple times.Power cycled computer multiple times. Tried Win7 built-in diagnostics.Tried setting up static IPs.Tried filling in preferred DHCP server address.Disabled Windows firewall. [code]
If set the LAN to 1000 duplex I get better throughput than If I set it to Auto 100/1000,but the problem is that then my internet modem stops working,is there a solution to this ?
View 11 Replies View RelatedI have a Asus n55s. The wireless acts very funky. It sometimes disconnects and stops working. Sometimes, it will stop detecting any nearby wireless networks altogether. Then I have to enable and disable the wireless functionality until it starts seeing nearby wireless networks.
View 9 Replies View RelatedI've got the same problem on my wife's Acer One 532h. Did it get resolved for you, Adrian and if so, how?
View 5 Replies View RelatedI have a problem with a wireless adaptor on a Toshiba Tecra (A11-1EE - PTSE0E-065052EN) running Windows 7.The wireless adaptor works fine but every now and again it will just stop working. The operating system says that the adaptor is turned off but it isn't. I've checked the driver but it is up to date.I have to disable the driver and then enable it again and then the adaptor begins to work correctly again.
View 4 Replies View RelatedI can no longer browse through any browser, or update any programs (even though I am still connected to my wireless router). I have already done a Refresh, but the problem persists
View 2 Replies View RelatedWireless internet connection stops working after anywhere from 10 minutes to two hours, a message pops up telling me it is "impossible to connect to my preferred wireless network", and then it fails to detect any wireless connections at all. The strangest thing is that when I try to "repair" the connection, which used to work, the computer immediately shuts down and restarts itself. It also seems like when I attempt to download something, like a movie for example, the connection fails right away, while if I'm just surfing the web it usually lasts around an hour before stopping. And when I restart the computer again it works perfectly fine at first, like right now, but eventually does the same thing.
View 9 Replies View RelatedBackground info:
Comcast cable internet and TV
Regular modem
Linksys WRT54G router
Windows7 desktop
The problem I'm seeing is that our wireless connection cuts out about 5 minutes after turning on our main desktop. Turn off the main desktop and wireless begins to work again. Throughout all of this, the wired connection works fine, and I have no problem connecting to the router either.
When my desktop is online via Ethernet, wi-fi stops working. A signal is detected, but is very unstable and often doesn't connect to the Internet at all, on any device. As soon as the desktop is no longer trying to access the Internet, all other wireless connections work without a problem. Base computer is Windows Vista Home Premium with all latest updates installed.Other connections include 2 laptops (one Win7, one PCLinuxOS), 2 Kindle Fire, Wii, iPod Touch, four cell phones, and Sony Media Player. They're never running all at once. But any number of them can run fine-- as long as the desktop isn't online at the time.
View 1 Replies View RelatedI've been using an 802.11 b/g USB wireless network adapter card with my computer to use in conjunction with an AT&T 2Wire router,which is about 20 or 30 feet away off in another room.After about 10 minutes on average, the adapter will stop transferring data suddenly, and it will stay that way for a while. If I do nothing, then sometimes it will start up again after several more minutes, but instead of waiting, I usually will select "Repair" from the Wireless Network Connection pop-up menu, which also works to get it started again. The problem though, naturally, is that after another little while, like about 10 minutes again, it will short out all over again. Sometimes, very rarely, it will stay working for up to maybe an hour, and sometimes, it can short out yet again within a few seconds.
View 9 Replies View RelatedWe use our internet to watch Netflix. We have had no problems until recently, I called the satellite Internet company(which is a local co.) they told me my router was going out. I bought a new one, problem solved! Right?!? WRONG my husband told me my neighbor just got Internet and has been playing Xbox everyday which coincidently is between the 5:30pm to 10ish pm we have been having issues with our router. What can we do to fix this? Do I have to buy a bigger router? He is not stealing off mine because it is password protected that was changed when new router was setup and programmed. I have been running of a Cisco Linksys E2500 advanced dual band n router. The router is in the same room as the TV accessing it, which we previously had no issue connecting anywhere in the house or garage.
View 1 Replies View RelatedA few days ago, my Linksys E3200 router stopped working suddenly for no reason. The SSID was still broadcasted for a few days, but no internet connection. Today the SSID does not broadcast at all and I seemingly have no access to it.I tried power cycling it.I tried reconfiguring it via the CD included in the box.I tried solving it with the wireless tools in Windows.
View 2 Replies View RelatedI just bought the E4200 routher at best buy a few weeks ago. I got it all setup how I want it. Its been working fine then about a day ago it started to stop working at random. All internet just stops working. Wired and Wifi. I have to either wait for it to work again or restart the router.
View 7 Replies View RelatedI have a Cisco Linksys E1000 wireless router. It has been working perfectly for the last few months until yesterday when I noticed none of my wireless devices could connect. The SSID was still being broadcast and my computers that were connected through an ethernet cable were still able to access the internet fine. Eventually I pressed the red reset button on the back of the router, which reset my router name, password, etc. I set everything back up and was able to connect again. Several hours later the wireless stopped working again. When I launched the Cisco Connect software I was prompted to update some software (possibly the router firmware) so I did that. After that I was able to connect to wireless again. This morning I woke up and wireless was not working again. This time I changed the password for the router and then I was able to connect to wireless again. I tried to change the router password back to the original password and I couldn't connect anymore. When I changed the router password back to the new password I could connect again.
View 1 Replies View RelatedMy wireless connection for 2,4 GHz stopped working correctly. Here's the set up:
I have an E4200 Linksys router. Furthermore I have a desktop running on Windows7 connected to the router with a wire. No problem there. I can connect to the Intenet via the E4200 and a modem.Then I have a notebook also running on Windows7. Until yesterday it was wireless (2,4 GHz) connected to the router and to the Internet, but now I can see the router on the networklist (so there is connection), but it will not make contact to the Internet. If I hook up the notebook with a line to the router it works OK.Then I have an iPad which makes a wireless connection to the Internet (via the router) for the 5 GHz option, but it does not make a connection with the 2,4 GHz option anymore (before yesterday this worked well). I did not change any settings on the Linksys or other network options, Can an update from McAfee make a difference (only for 2,4 GHz?).
wireless connection stop working and icon lossed on hp laptop dv 2000
View 1 Replies View RelatedHaving a problem with port forwarding on their WRT400N? I'm forwarding one service (https) and this stops working if it's not accessed after a 10 days or so. The only way to get it to work again is to reboot the router. I’m running the “latest" firmware, which is an oxymoron considering it's been over 12 MONTHS since Linksys updated the code... Which is appalling considering this appears to be their flagship wireless N router.
View 5 Replies View RelatedI'm having a bit of trouble with my e4200, It keeps on "dropping" connection, and by dropping I mean it constantly around 3-5 minutes the internet stops working with all my computers, it's connected by wifi with 2 PC's, and 1 PC is wired with an ethernet cable, and I also have 2 mobile devices connected at it. The internet would start working again within 30s, to 1m, but that it drops soon.Methods I've done to fix it:
-Updated firmware to the latest one
-Set the MTU to 1400
-Reset it, (30 second press)
-Rebooted, (Cooled down, doesn't really run hot just a little warm)
-Restored to factore defaults
Right now I have my computer (iMac early 2012 summer purchase) plugged directly into the wall via ethernet cable for internet access. I have only begun doing this in the past week because my E1200 wireless router has stopped working properly. I have reinstalled and reset to factory settings and set up with Cisco Connect and setup manually over the past week troubleshooting every possible way I have ever known how. My internet, obviously, is working. And when I set up the wireless network it connects properly and obtains an IP address and the lights on the back of the unit light up correspondingly and correct. But I cannot connect to the internet via the router, wirelessly or plugged directly into it. Yet when I take the internet cable and plug it straight into my computer it works.Mainly just need to know if this can be fixed or if I need to go return this unit and get a replacement. The router was purchased two months ago and has not had any issues since I first set it up until a couple of weeks ago and my phone is using up all of my cellular data plan without being connected to my wi-fi...
View 1 Replies View RelatedI have a Studio 1557 laptop (purchased in late December 2009) that all of a sudden has lost wireless connection to the internet. Went to use it last night (Thursday) for normal use and no wireless connection at all. Before this issue, there were no problems connecting thru wireless at all...in fact used it Wednesday evening for work/surfing and no problems whatsoever. We are using a Linksys 160N router...have 2 other computers and 2 iPod Touches that are connecting just fine, absolutely no problems. It can connect thru a wired connection with no problems but nothing thru wireless...this is a fairly new router, about 10 days old, but haven't had any issues with it since set-up.
I didn't have much of a chance to do anything about this last night or this morning. I really don't want to bother calling Dell Support either.
Dell Studio 1557 Windows 7 64-bit, 8gb 1066Mhz, 320HD
I installed two AIR-AP1142N-E-K9 access points, running a fairly simple config, WPA2 PSK, with AES cipher, both the same SSID.The two access points are connected to Cisco 2960G switches, which are in turn connected to each other, again without any fancy config options, no VLAN's ed.
After a random while, varying from 30 minutes to 15 hours, the access points will stop sending/recieving traffic on the ethernet interface.The units don't stop at the same moment, this also varies seemingly random. It's not related to load or the amount of clients (1 to 15).Only turning on one unit doesn't make any difference.
The units keep sending out their SSID, you can associate to them, but the DHCP requests aren't passed on to the DHCP server which is connected to one of the 2960G's.If you wirelessly connect to the AP and set a manual IP adress you can reach the webinterface and telnet/ssh to the access point. The ethernet link is reported as being up on the access point. Also the switch reports a link on the port to which the access point is connected.Resetting the link does have no effect. The log doesn't mention any errors or warnings.Power cycling or reloading the access point will put it back in working order for a varying amount of time.
Access point version:
Cisco IOS Software, C1140 Software (C1140-K9W7-M), Version 12.4(21a)JA1, RELEASE SOFTWARE (fc1)
Access point config:
!
! Last configuration change at 14:41:40 +0100 Sat May 12 2012 by admin
! NVRAM config last updated at 14:41:40 +0100 Sat May 12 2012 by admin
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
[code]...
I've tried all sorts of settings, and I'm still holding out that its a setting possibly, but I have a E3500 and devices on both 5Ghz and 2.4Ghz... Most of them, probably when idle, seem to stop working over WIfi. They still have decent connection, but every internet related request just times out. Disable and reinable the wifi and it works great again.
Could this be defective wifi radios? or could it really be interference? I have it happening on multiple devices. Also, I'm not far away from the router when it occurs, and when I reconnect, it seems to work just fine for a while. Basically the big problem is on the cell phones and tablets because I'll miss notifications... I'll turn off the wifi and turn it back on when I use the device next, then a flood of notifications will come in. Again, it's not just a phone thing, tablets and laptops have the same problem, that's just the main reason I want it fixed.
I'm using a dlink network adapter (6 months old) on my pc, have always gotten an excellent signal. Main pc in house is hooked up to dir-615 router & works fine. I had some bsod's recently & decided to reformat xp. Loaded the driver for the adapter, got an excellent signal, but couldn't access the net. The signal shows 4 green bars for about 20 seconds, then all white bars for a few seconds, then back to green. It keeps dropping the signal over & over. The network card shows its working properly.
I did an ipconfig, and it says "media state disconnected" & shows no addresses. If the dlink adapter is faulty then i'm assuming it wouldn't work in the first place. I'm thinking its some setting not right in the pc. The reformat went fine, loaded all the drivers in the right order. I only have IE for a browser which i need to access the net with to load firefox & all other programs plus service pack 3 & other xp updates back on with.
When I loaded the driver for the dlink adapter, i used a different workgroup/name than the network name originally used to set up the dlink router if that means anything. I've read about resetting the winsock which i'm going to try, but I would think that wouldn't be it since i just reformatted the pc.
i have a 876 Router, connected to the Internet and a VPN. From inside i would like to pass all traffic destinied to 192.168.0.0 255.255.255.0 to the VirtualPPP IF and al the other to the Internet (vlan2) I have created this rule, but after applying ist works only for about 30 to 60 seconds. after that only the Internet reachable. Everytime i do a clear ip nat trans * both Interfaces will work für 30 to 60 secs again...
This is the relevant part of the cfg
ip nat inside source route-map Di1 interface Virtual-PPP1 overload
ip nat inside source route-map VLAN1 interface Vlan2 overload
!
access-list 1 remark CCP_ACL Category=2
[Code].....
I have two DIR-655s. One is my main router, connected to my modem. The other, on the other side of the house, is set up as an access point. I followed this guide to set up my AP: [URL]
Both are are hard wired. I have both of them using the same SSID. Both are 802.11g only, have the same security mode, and key. The only wireless difference is the channel. One uses 6, while the other uses 11.
On initial setup, everything is fine, but after a few hours, the AP just seems to stop broadcasting a signal. I'm using "Wifi Analyzer" on Android to monitor it. When I look at the AP, the wifi indicator light is still on. If I log into it, change the channel, and press save on the "Wireless Settings" screen, it will broadcast for a few more hours before stopping again. The wired connect of this AP always seems to work (Xbox is hard wired to it).
AP Hardware Version: B1 / Firmware Version: 2.03NA
I've been having this problem with my laptop's wifi for a while now and it's been getting a little out of hand lately that I can't deal with it anymore. I asked some friends and they seem to have the same problem too but not nearly as often as I do. Every so often, my laptop's wifi just stops working so I turn it off and then turn it back on and it starts working again. My friend says it happens very rarely to him but for me just today it happened 2 times within 10 minutes
View 7 Replies View RelatedI'm having is that every few hours my TCP/IP protocol stops working. The modem lights remain normal but I can't connect to anything. The only thing that works on the internet is traceroutes at the command prompt which function normally. The solution is that I have to reboot and then everything returns to normal until a few hours later when it happens again. There are no error messages on any of my browsers. The page just goes white immediately. When I try to retrieve my email, I get a message about the TCP/IP isn't working.
View 9 Replies View RelatedOn Windows XP, my integrated NIC stops working after hosting a server. The server starts fine, ports are forwarded, firewall is down, modem is fine, but when I receive a connection, it shows they have made a connection, but then they drop, as do I. I can't browse or ping anywhere. I have to physically disconnect, then reconnect the ethernet cable to the port, or restart the computer. Upon ipconfig, the adapter is set with the Windows default ip (169.x.x.x) and cannot be /release'd or /renew'd.
View 10 Replies View Related
