Cisco Wireless :: 2.4 GHz Wi-Fi Connection - E4200 Router Stops Working
Oct 1, 2012
My wireless connection for 2,4 GHz stopped working correctly. Here's the set up:
I have an E4200 Linksys router. Furthermore I have a desktop running on Windows7 connected to the router with a wire. No problem there. I can connect to the Intenet via the E4200 and a modem.Then I have a notebook also running on Windows7. Until yesterday it was wireless (2,4 GHz) connected to the router and to the Internet, but now I can see the router on the networklist (so there is connection), but it will not make contact to the Internet. If I hook up the notebook with a line to the router it works OK.Then I have an iPad which makes a wireless connection to the Internet (via the router) for the 5 GHz option, but it does not make a connection with the 2,4 GHz option anymore (before yesterday this worked well). I did not change any settings on the Linksys or other network options, Can an update from McAfee make a difference (only for 2,4 GHz?).
View 9 Replies
ADVERTISEMENT
Oct 5, 2011
I just bought the E4200 routher at best buy a few weeks ago. I got it all setup how I want it. Its been working fine then about a day ago it started to stop working at random. All internet just stops working. Wired and Wifi. I have to either wait for it to work again or restart the router.
View 7 Replies
View Related
Feb 3, 2013
I'm having a bit of trouble with my e4200, It keeps on "dropping" connection, and by dropping I mean it constantly around 3-5 minutes the internet stops working with all my computers, it's connected by wifi with 2 PC's, and 1 PC is wired with an ethernet cable, and I also have 2 mobile devices connected at it. The internet would start working again within 30s, to 1m, but that it drops soon.Methods I've done to fix it:
-Updated firmware to the latest one
-Set the MTU to 1400
-Reset it, (30 second press)
-Rebooted, (Cooled down, doesn't really run hot just a little warm)
-Restored to factore defaults
View 4 Replies
View Related
Mar 9, 2013
I've tried all sorts of settings, and I'm still holding out that its a setting possibly, but I have a E3500 and devices on both 5Ghz and 2.4Ghz... Most of them, probably when idle, seem to stop working over WIfi. They still have decent connection, but every internet related request just times out. Disable and reinable the wifi and it works great again.
Could this be defective wifi radios? or could it really be interference? I have it happening on multiple devices. Also, I'm not far away from the router when it occurs, and when I reconnect, it seems to work just fine for a while. Basically the big problem is on the cell phones and tablets because I'll miss notifications... I'll turn off the wifi and turn it back on when I use the device next, then a flood of notifications will come in. Again, it's not just a phone thing, tablets and laptops have the same problem, that's just the main reason I want it fixed.
View 5 Replies
View Related
Jun 21, 2011
The latest Firmware for the E4200 states that there is now the ability to attach a printer to the USB port of the router. I am using a Mac, so that may be the problem, but I have followed the instructions on how to add the printer and it is not happening. It's possible that the MAC Firmware was not given the ability to add a USB printer like the PC Firmware upgrade.
View 9 Replies
View Related
Oct 20, 2011
wireless connection stop working and icon lossed on hp laptop dv 2000
View 1 Replies
View Related
Nov 10, 2012
I have a windows vista pc networked to a second pc. I have wirelessly networked internet to 2 laptops. I have an actiontec wireless modem by verizon. All of a sudden my host pc started randomly losing internet connection, but the wireless laptops still have a signal. It seems like the host sometimes can't "see" the modem.Here are my settings while the internet is functioning.Microsoft Windows [Version 6.0.6001]Copyright (c) 2006 Microsoft Corporation. All rights reserved.[CODE]
View 11 Replies
View Related
Mar 10, 2012
I bought this router and ever since my internet connection will drop out for 5 minutes at a time then come back in. This happens on both wifi and the wired connection. The weird part about it is that if there is a program that maintains a constant connection, e.g. xbox live or an online MMO, they don't lose connection when every other device or even tabs within the same browser all lose connection.
BTW It's the REV_B with the 2.07 firmware.
View 2 Replies
View Related
Jul 1, 2011
I was quite excited about E4200 I got yesterday. Everything works perfect except front LED light start blinking a few hours later. Don't know why it happens in a sudden and non-stop. After several tries, I found that disabling SSID broadcast for both 2.4 and 5GHz stops the blinking.Of course, before doing that, I upgraded firmware to 1.0.02, reset to factory defaults and finally set up E4200 manually rather than using Cisco Connect. Now the LED light is continuously lit.
View 4 Replies
View Related
Sep 4, 2011
I am having quite a large problem with my TalkTalk connection. Whenever i turn off my computer, internet access stops for the entire network, anyone who is conencted, however, local access is still possible.I am also having a problem with the wireless in my laptop also. Whereas every computer on my network is able to access the router wirelessly, my computer (the one that seems to chut down internet access) won't do that, i send packets, but none are received.
View 2 Replies
View Related
Jan 29, 2013
I can no longer browse through any browser, or update any programs (even though I am still connected to my wireless router). I have already done a Refresh, but the problem persists
View 2 Replies
View Related
Jul 4, 2012
We use our internet to watch Netflix. We have had no problems until recently, I called the satellite Internet company(which is a local co.) they told me my router was going out. I bought a new one, problem solved! Right?!? WRONG my husband told me my neighbor just got Internet and has been playing Xbox everyday which coincidently is between the 5:30pm to 10ish pm we have been having issues with our router. What can we do to fix this? Do I have to buy a bigger router? He is not stealing off mine because it is password protected that was changed when new router was setup and programmed. I have been running of a Cisco Linksys E2500 advanced dual band n router. The router is in the same room as the TV accessing it, which we previously had no issue connecting anywhere in the house or garage.
View 1 Replies
View Related
Jul 30, 2012
A few days ago, my Linksys E3200 router stopped working suddenly for no reason. The SSID was still broadcasted for a few days, but no internet connection. Today the SSID does not broadcast at all and I seemingly have no access to it.I tried power cycling it.I tried reconfiguring it via the CD included in the box.I tried solving it with the wireless tools in Windows.
View 2 Replies
View Related
Oct 21, 2011
I have a Cisco Linksys E1000 wireless router. It has been working perfectly for the last few months until yesterday when I noticed none of my wireless devices could connect. The SSID was still being broadcast and my computers that were connected through an ethernet cable were still able to access the internet fine. Eventually I pressed the red reset button on the back of the router, which reset my router name, password, etc. I set everything back up and was able to connect again. Several hours later the wireless stopped working again. When I launched the Cisco Connect software I was prompted to update some software (possibly the router firmware) so I did that. After that I was able to connect to wireless again. This morning I woke up and wireless was not working again. This time I changed the password for the router and then I was able to connect to wireless again. I tried to change the router password back to the original password and I couldn't connect anymore. When I changed the router password back to the new password I could connect again.
View 1 Replies
View Related
Jan 16, 2010
Having a problem with port forwarding on their WRT400N? I'm forwarding one service (https) and this stops working if it's not accessed after a 10 days or so. The only way to get it to work again is to reboot the router. I’m running the “latest" firmware, which is an oxymoron considering it's been over 12 MONTHS since Linksys updated the code... Which is appalling considering this appears to be their flagship wireless N router.
View 5 Replies
View Related
Oct 30, 2012
Right now I have my computer (iMac early 2012 summer purchase) plugged directly into the wall via ethernet cable for internet access. I have only begun doing this in the past week because my E1200 wireless router has stopped working properly. I have reinstalled and reset to factory settings and set up with Cisco Connect and setup manually over the past week troubleshooting every possible way I have ever known how. My internet, obviously, is working. And when I set up the wireless network it connects properly and obtains an IP address and the lights on the back of the unit light up correspondingly and correct. But I cannot connect to the internet via the router, wirelessly or plugged directly into it. Yet when I take the internet cable and plug it straight into my computer it works.Mainly just need to know if this can be fixed or if I need to go return this unit and get a replacement. The router was purchased two months ago and has not had any issues since I first set it up until a couple of weeks ago and my phone is using up all of my cellular data plan without being connected to my wi-fi...
View 1 Replies
View Related
Jun 17, 2012
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft� Windows Vista� Home Premium, Service Pack 2, 32 bit
Processor: AMD Athlon(tm) Processor LE-1660, x64 Family 15 Model 127 Stepping 2
Processor Count: 1
RAM: 2045 Mb
Graphics Card: NVIDIA GeForce G210, 512 Mb
Hard Drives: C: Total - 292284 MB, Free - 43340 MB; D: Total - 12958 MB, Free - 1819 MB;
Motherboard: PEGATRON CORPORATION, NARRA5
Antivirus: AVG Internet Security 2012, Updated and Enabled
So here's my setup:Computer A is connected directly to a cable modem box via USB. Computer B (which is sometimes a laptop and sometimes a desktop) is connected to Computer A and shares its internet connection via Ethernet because I am too cheap to buy a router.A few days ago we borrowed a Belkin wireless router so we could have both desktops, the laptop, and my fiance's iPod Touch access the internet at the same time. That worked fine but once we returned the router and tried to put everything back to normal, it didn't work. The only computer able to access the internet is Computer A (or whichever one is directly connected).I tried resetting the modem and restarting both machines. I tried disabling all of the connections that showed up from using the router.Windows states that the IP isn't properly configured or something of that nature. I tried setting it to automatically set the IP but to no avail.Here is the part that really confuses me - I can access Computer B from Computer A via LAN using the ethernet cable, so the connection between the two computers is fine.
View 4 Replies
View Related
Oct 11, 2012
Router randomly stops working and sometimes reconnects by it self and sometimes I have to manual reset the router. Also I only get 2-3 bars wireless. Is my router not configured properly or damaged?
View 2 Replies
View Related
Feb 19, 2011
My D-Link DIR-655 will no longer let me pull up any web pages after several hours. For example, it works great when first rebooted, but the next morning web pages have timed out. When it is broken, I'm unable to connect to web pages via another wireless access point that i've plugged into the D-Link. I'm unable to use any of the wireless PCs or devices in my house.After it's rebooted, it works well for at least a few hours. It has the latest firmware and has basic, out of the box settings.
View 14 Replies
View Related
May 4, 2011
I have a dell inspiron 6000 laptop that stopped connecting to internet yesterday (may 3). this laptop (a) connects wirelessly to a d-link dir 655 router. three other desktop computers (hardwired) and identical laptop (b) (wireless) are also connected to said wireless router and internet is working fine for those four computers.[CODE]
View 3 Replies
View Related
Jan 16, 2012
I have downloaded netflix on our wii. We have a E1000 Linksys router.
While watching anything on Nextflix, the movie stops every 2 minutes and began loading again.
View 2 Replies
View Related
Mar 14, 2012
I have the same problems with the Cisco EPC3925?Everytime a wired pc reboots/boots everyone on the network losses internet, also wireless is disconnected. Also everyone get unidentified network and later its set to public network.We are using a Sitecom switch LN-120. I have to unplug this switch, then restart the router to fix the problem each time. Then I can plug it in again and everything is fine.The router will not restart (does not go further then 2nd blinking LED.) if I do not unplug the switch.
View 8 Replies
View Related
Sep 16, 2012
I recently bought a new laptop (Asus U47VC) and i am having internet connection issues. When I am at my mother's place or at school, I have no problem connecting to the internet wirelessly. However, at my father's place, my internet stops working every couple hours and will be unable to connect to the network until i reset the router and modem. Once the reset is complete, I am good for another couple hours. All the other devices ( laptops, iphones, etc.) do not have this problem and the connection is never an issue. I have read that this could possibly be a problem regarding IP addresses but I do not quite understand how to fix this.
View 1 Replies
View Related
Aug 6, 2012
I just upgrade my E4200 V2 from 2.0.37 to 2.1.38 (finally! would be nice if I knew before that I had to unzip the file before I could flash it....)
But when I enable NAT in the settings, there is no way to edit NAT entries that I've set before under firmware 2.0.37.
View 1 Replies
View Related
Oct 26, 2011
I have WRT54G2 router. All settings are more-less default and the behavior is following.You start up the router. If you do not connect wireless device within 10 minutes, then you have to restart the router.You have assigned IP via wifi, and when you connect cable device to the router, the wifi PCs are disconnected.
View 3 Replies
View Related
Sep 4, 2011
Basically, my internet's been fine until about a week ago. I'm currently using the Aztech DSL1000EW router/modem which has been working great up to now. My problem is this: after about 5-30 minutes (time fluctuates, annoying because after 15 minutes of continuous usage you think the problem's solved!) all webpages suddenly become 'unavailable'. I've disabled proxies under LAN settings, tried flushing DNS, resetting winsock with the netsh commands but to no avail. To get the internet to work again, I can just go to my router page, click disconnect and reconnect and it'll work for another 5-30 minutes.
View 8 Replies
View Related
Dec 10, 2011
I had to move to a remote area in which I can only use a 3G mobile internet connection. The 3G connection is working fine, that is until I plug in my Asus RT-N12 router in order to create a wireless home network between our computers (for file and printer sharing).
For me it seems like firefox is trying to connect to internet trough the router. But that is not possible, since the router has no internet. The only internet is from the 3G mobile internet stick.
How can I tell firefox, that it should look for internet in the 3G connection instead of the router?
View 1 Replies
View Related
Mar 8, 2013
I have a Asus n55s. The wireless acts very funky. It sometimes disconnects and stops working. Sometimes, it will stop detecting any nearby wireless networks altogether. Then I have to enable and disable the wireless functionality until it starts seeing nearby wireless networks.
View 9 Replies
View Related
May 2, 2012
I've got the same problem on my wife's Acer One 532h. Did it get resolved for you, Adrian and if so, how?
View 5 Replies
View Related
Mar 22, 2012
Once every couple of days the wireless service seems to disappear. I've connected to the router from a wired computer and everything looks ok from the d-link panel, however its not showing up as an available wireless network on the wireless units. Pulling the power off for 30 seconds tends to get it working again. I'm configured bg and n. I need a mix... an old B laptop, have one machine that has a G NIC, and the rest are N.
View 14 Replies
View Related
Nov 14, 2011
Just upgrade my Thinkpad to win7 64bit, but seems the wireless doesn't support by E4200 now, upgraded 1.0.03 and latest intel 14.2.0.10 for wlan card but still not working. Tried the TP with USB WN111v2 is not problem at all.4965AG works perfect in office WPA2 AES LEAP and netgear router.
View 9 Replies
View Related
Jun 24, 2011
I cannot get the Guest Network feature to work.Even though Guest SSID is enabled, it does not show up on any devices attempting to connect. Manually connecting by entering the Guest SSID fails (not recognized). On devices with the primary 5 and 2.4 GHz configured they do see the third network but without SSID (unknown) and are also unable to connect to it manually using the SSID.I did not try this before 1.0.02. Have rebooted modem and verified all configs (multiple times). The network is live in an office and can't keep screwing with it or drastically changing its settings.
View 9 Replies
View Related
Feb 17, 2011
I just upgraded to an E4200 from a D-Link DIR-655. I cannot seem to get my desktop to connect to the E4200 at 1 GBS. My adapter is set to "auto negotiate" but will only connect at 100 MBS. If I try forcing the adapter setting to 1 GBS, it never connects. I can swap out my E4200 with the DIR-655 and it will connect at 1 GBS just fine. I am using a CAT 5E cable. Is there something I'm missing here or is the E4200 just more finicky than the the DIR-655?
View 9 Replies
View Related
