Network Stops Working For 2 Mins When Laptop Joins Network?
Jan 27, 2013
We have a working home network with 4 pcs connected to the network. 3 via ethernet and 1 via wireless. Everything is working fine. Then we have 2 more laptops which are connecting via wireless. When either of those 2 laptops joins the network, the whole network stops working for a minute or 2. After that it starts working again for everybody (including those 2 laptops). However its super annoying when it does that all the time. (The laptop goes into sleep mode, when u turn it back on again the internet(and the whole network) stops working for awhile again..).
View 2 Replies
ADVERTISEMENT
May 2, 2012
I've got the same problem on my wife's Acer One 532h. Did it get resolved for you, Adrian and if so, how?
View 5 Replies
View Related
Jan 24, 2013
We have 3 pcs connected to the router via cable and 2 more pcs connected through wireless. Everything works great. But when I try to connect (want to connect 2 more laptops via wireless) either one of the two laptops, the whole network stops working immediately. I have tried updating the drivers (they are up to date), removing the password from the router, gave the laptops static IPs (and all other pcs as well) with no results. As soon as one of the 2 laptops joins the network through wireless, it stops working for everybody. However if I connect them through the cable they work fine. One of the laptops uses win vista 64 bit, the other one win 7 64 bit. We have cisco RangePlus Wireless Router wrt110.
View 1 Replies
View Related
Sep 16, 2011
My internet stops approx in 10 min fo start of pc to an hour at times.Am not able to connect to router too.I have a wireless router and the PC is connected with a wire.The internet is not at fault as I can use the router @ laptop.Was on windows 7 Ultimate and all was working finer till 2 days ago. I thought May be I shoudl do a reinstall and installed my old and trusted win xp.Still its here. The win xp is completely updated and up to mark. I cannot even connect to the router 192 address when the internet stops.I have already changed dns to open dns. I remember that in windows 7 it used to show some dns /ip error , when I woudl trouble shoot at times and thus using open dns on router. Nothing working, and am going mad[CODE]
View 14 Replies
View Related
Feb 10, 2013
My computer runs bit torrent almost all the time, sometimes when I start Firefox the home page google never loads and neither do any other web pages yet bit torrent is still working as if nothing has changed. If I start a download in Firefox come back to the pc a few hours later Google doesn't load but the Firefox download still continues.What causes this is it DNS ?
View 2 Replies
View Related
Apr 22, 2012
On the basement level, and on level 2, I have in wall junction boxes where the Cat5E Ethernet wires come together. There are 6 lines that go from the level 2 box to 6 wall jacks on levels 2 and 3. There are also 6 lines that go from the basement box to 6 wall jacks in the basement and on level 1. There is also a Cat5E line running between the two boxes.I have wired all these plugs on both ends with T568B standard, and in each box they go into a patch panel. I have used a cable tester to test and make sure all these plugs are properly wired. I have also tested individual computers hardwired linked through to my router (without going through switches) and confirmed that they work that way, so I'm pretty sure I've wired it correctly.
At the second floor box, I have an AT&T 2Wire wifi router and modem, with AT&T Uverse service. I also have a monoprice Ethernet switch. In the basement box, I have another monoprice Ethernet switch (link to the type of switches I have is below). The switches are connected together via the Cat5E that runs between the boxes, and the second floor switch is connected to a free port on the back of the AT&T 2Wire Uverse wifi router.These wall plugs are not all currently used. In fact the problem I describe below occurs even if nothing is plugged into the wall plates.My problem is: when I hook up everything, so my wifi router is wired to the first switch, which is in turn wired to the 6 wall plugs upstairs as well as to the switch in the basement, and that basement switch is in turn wired to the 6 wall plates downstairs... at that point when I plug it in, my wifi stops working. Basically, whenever my router is plugged into this hard wired network, the wifi stops working. When I unplug the network, the wifi comes back (I usually reset it, not certain if it would come back just from waiting).
Interestingly, it doesn't necessarily stop working if most or all of the plugs are removed so the network is not connected (for example, if I just go through one plug instead of all of them)Does a network of wired Ethernet, even if not plugged into anything, cause some sort of a load or drain on the router that could make it stop working?
View 1 Replies
View Related
Sep 4, 2011
I am having quite a large problem with my TalkTalk connection. Whenever i turn off my computer, internet access stops for the entire network, anyone who is conencted, however, local access is still possible.I am also having a problem with the wireless in my laptop also. Whereas every computer on my network is able to access the router wirelessly, my computer (the one that seems to chut down internet access) won't do that, i send packets, but none are received.
View 2 Replies
View Related
Jun 20, 2011
I have a DIR-655 with both wired and wireless connections. Yesterday, network stopped working on one wired machine while using it to surf the internet and a 2nd wired machine has not worked in 3 weeks after moving it from one room to another. Wireless connections are working fine.
-2 wired systems (Windows 7 and Windows XP), both stopped working
-2 wired Xboxes - working fine
-2 laptops, wireless working fine
-1 smart phone, wireless working fine
I've power cycled my DSL modem and DIR-655 multiple times.Power cycled computer multiple times. Tried Win7 built-in diagnostics.Tried setting up static IPs.Tried filling in preferred DHCP server address.Disabled Windows firewall. [code]
View 4 Replies
View Related
Mar 8, 2013
I have a Asus n55s. The wireless acts very funky. It sometimes disconnects and stops working. Sometimes, it will stop detecting any nearby wireless networks altogether. Then I have to enable and disable the wireless functionality until it starts seeing nearby wireless networks.
View 9 Replies
View Related
Feb 5, 2013
I've been having this problem with my laptop's wifi for a while now and it's been getting a little out of hand lately that I can't deal with it anymore. I asked some friends and they seem to have the same problem too but not nearly as often as I do. Every so often, my laptop's wifi just stops working so I turn it off and then turn it back on and it starts working again. My friend says it happens very rarely to him but for me just today it happened 2 times within 10 minutes
View 7 Replies
View Related
Nov 12, 2012
I boot up my computer. I close it over. come back later. open it. Computer will connect but with the small yellow triangle. Thing is though, it's only my computer that ever has issues with my internet connection. My sisters laptop has never had an issue with out internet. Yet my laptop is able to connect to the neighbors internet fine. The solution to my problem almost all of the time is to simply reboot my computer, which solves the problem(most of the time). But i'm getting so sick of having to do it. The other times when a reboot doesn't work I have to manually reset the internet. As i'm typing this I'm on my neighbors internet. my sister is connected fine to our internet but my laptop simply won't work with it so i'll have to reset it when i'm finished this Some useful information might be that this problem only started happening ever since my computer got wiped.I've tried updating the drivers but apparently they're up to date.
View 5 Replies
View Related
Oct 20, 2011
wireless connection stop working and icon lossed on hp laptop dv 2000
View 1 Replies
View Related
Feb 25, 2010
I have a Studio 1557 laptop (purchased in late December 2009) that all of a sudden has lost wireless connection to the internet. Went to use it last night (Thursday) for normal use and no wireless connection at all. Before this issue, there were no problems connecting thru wireless at all...in fact used it Wednesday evening for work/surfing and no problems whatsoever. We are using a Linksys 160N router...have 2 other computers and 2 iPod Touches that are connecting just fine, absolutely no problems. It can connect thru a wired connection with no problems but nothing thru wireless...this is a fairly new router, about 10 days old, but haven't had any issues with it since set-up.
I didn't have much of a chance to do anything about this last night or this morning. I really don't want to bother calling Dell Support either.
Dell Studio 1557 Windows 7 64-bit, 8gb 1066Mhz, 320HD
View 6 Replies
View Related
Nov 29, 2011
I have a compaq presario V6500 laptop running windows vista SP2. For the past few days i am not able to connect to the internet using ethernet port. But my wireless still works.On checking device manager, my network adapter, a nVidia nForce networking controller#2, gives the following error.
View 14 Replies
View Related
Jul 25, 2012
Recently my wirless computer has been loading web pages extremely slow. When I download anything the download speed will start at around 2Mbps and then within second drop to 1Mbps then so on untill it's showing a download speed of bytes. Not kilobytes but just the b. Then int will hang up and the download will fail. Sometime resetting the adapter will allow me another failed attempt to download it. Ive reset the router reinstalled the operating system (was due for a fresh install anyway). Still nothing. Adapter shows connection to the router with 4/5 bars and through to the Internet.
View 1 Replies
View Related
May 11, 2011
During the last month or so my internet connection keeps stalling and will not work until I repair the connection, however I am still connected to the network, I just can't send or receive packets. In particular when I am downloading things, it will stop after 2MB is downloaded or 300MB, it just random. After sending/receiving 7,000 packets or 700,00. This only happens to my computer with the wifi adapter. Prior to this I didn't have any issues for over two years. My phone and laptop still connect via wifi to the internet. And the xbox and blu ray player are connected via ethernet and have not had any problems. The log for my router states "deauthenticate reason 3", which I have found to mean "The access point went offline, deauthenticating the client". So, I figured that the issue could be the wifi adapter which I installed on the laptop and that too never had an issue. I used inSSIDer 2.0 to see the close by networks and changed channels to get away from the strongest ones. I tried switching to wireless n only instead of g and n, the problem still persists.
Then I figured the issue must be my computer and no malware, spyware, adware nor any virus was found. The same thing happened while in safe mode. I also tried the winsock fix to no avail, reinstalled the wifi adapter and made sure all firmware for the router and adapter were up to date as well as XP. I also tried with my firewall shutdown but I still loose the connection. So I then reluctantly did a clean install and even with the bare essentials it still stopped working. I also bought a 15ft USB extension to get a better signal but still, even though I have a good or excellent signal I still have problems. My latest thought was this was the only machine running firefox 4 so I went back to 3 and that didn't either. I checked my usage with my ISP and I am no where near the 250GB a month.
View 1 Replies
View Related
Oct 14, 2012
After some time LMS stops to refresh network topology (not changing colors for devices which lost/found). However, if I restart topology services devices are refreshed.
Checked the processes. Everything is fine but there is a process named "1018". But I did not found any job with this number.
View 2 Replies
View Related
Feb 28, 2012
My company have a Cisco PIX 525 firewall which is cater for NOC internal data network and also voice network, the subnet for data network is 192.168.2.0/24 and the subnet for voice network is 172.16.2.0/24. someday this NOC firewall was faulty. I was migrated the data network from this NOC firewall to the other temporary firewall just at the moment. And the voice network i migrated it from where it orginal at NOC firewall to a VOIP system which actually having a connection with my temporary firewall(This temporary FW only to take the traffic of data network). After the migration of data network from old firewall to temporary firewall and also the migration of voice network from old firewall to PABX system. The subnet for data network remain the same as 192.168.2.0/24, but the subnet of voice network i edit from 172.16.2.0/24 to 192.168. 3.0/24.Now when i want to use one Cisco router 2600 to replace this temporary firewall then facing problem at the voice network....The data network after migrated from temporary firewall to new 2600 is ok, users can browsing. But when i trying to at the same time when the data network been migrated , it will affect the voice network which still located at PABX. ..user cannot make call...I was thinking reason because this voice network which currently in 192.168.3.0/24 is tight to somewhere on the 192.168.x.x at the old firewall internetwork. So, when i migrated the data network over to new router, it will also cause the failure of voice even thought after i migrated the voice system to new router.So when i do the disaster recovery back to the temporary firewall for both data and voice. The voice is resuming to normal.
View 4 Replies
View Related
Aug 21, 2012
This past weekend I went out of town and took my Windows 7 laptop with me -- since I returned home, it has been unable to connect to my wireless network. Other devices in my home connect to the network just fine, and the problem laptop has always been fine until now. My network card is an Atheros AR9285, and I'm attempting to connect to a Medialink router with WPA password protection and AES encryption.My wireless network icon in the task bar has a yellow sign with an exclamation point in it. It says "No Internet access."
View 1 Replies
View Related
Jan 8, 2013
I'm experimenting/attempting to use a laptop as a network tap between my (DSL) modem and a wrt54gs by creating a bridge with two NICs in the laptop. My problem is I can't seem to get connectivity on the user end of the router. I can't ping the bridge from an end computer...
DHCP is disabled in the router, but even when manually configuring the IP address on an end computer and using the bridge as a default gateway I can't ping out.
Am I completely misunderstanding the purpose of a NIC bridge?
View 1 Replies
View Related
Oct 30, 2012
I have a Dell Optiplex running XP wired to a Netgear router. My laptop is a Dell Inspiron 1501 running Windows 7. When I got the new router everything programed easily and I could retrieve files from my desktop and print remotely. Sometimes I would have to "refresh" before the laptop would detect the desktop but now it will not detect the desktop or the printer. I suspect that a Microsoft Update did this but just guessing. I went back and deleted the updates that downloaded around the time that this stopped working. I have tried every thing that I can think of to get it back working but can not get it fixed.
View 2 Replies
View Related
May 20, 2012
... and made a fundamental mistake of uninstalling adapters hastily without looking into it. Now when I try to re-install the adapters, I'm running into difficulties. Specifically, I don't have the CD-ROM I originally must have used, and the following message is popping up: "Files Needed - The file 'atl02_2k.sys' on Atlansic Fast Ethernet Adapter Installation Disk is needed. Type the path where the file is located and then click OK." Unfortunately, I don't have any idea if there is a path where this is located, so installation cannot complete.
The reason I took this option to begin with was that the wireless connection on my laptop [Asus, Windows XP] was acquiring network address without ever connecting fully to the internet. I had previously tried another of other methods, such as manually entering an IP address, to no avail.
View 7 Replies
View Related
Apr 22, 2011
i have an RTA1025W router. When i plug a network cable into it nothing happens. When i power it down with the cable still plugged in when it boots the LAN1 led flashes rapidly then stops? Then no connection to it via the PC?
View 3 Replies
View Related
Apr 27, 2011
I bought a DIR-655 for my parents after their old router died in a planned power outage. It's a rev. B1 model running the 2.00 firmware. It worked fine initially for a day or two with great wireless coverage, even in the previously low-signal spots in the house.Then the problems started. The router now has trouble loading any website. What you get is instead a page returned from the router saying something along the lines of "network unreachable, please check you internet settings" (I will go there today or tomorrow so I'll update the post with the specific error). Refreshing the page a few times sometimes makes it load, but extremely slow and then the same thing happens again a few moments later. The same thing happens on both wifi and through the router's LAN ports. If I connect a computer directly to the modem it works just fine, as it has always done before getting this router.I have disable QoS, NAT endpoint filtering and the firewall (SPI). I have also set the WAN port speed to 100Mbit/s in the router, to match what the modem is set to (also had issues with the default setting).
View 7 Replies
View Related
Nov 13, 2011
I just got a new notebook that has windows ultimate, and whenever i turn it on it knocks off all the other PCS on the network and the printer, including the one the router is wired to. I can only get it to pick up all 4 devices when i go into the Lynksys program and click change password. But then the program locks up and i have to shut it off manually.
I already reset the router four times trying to get it to pick up all the PCs but it never works. I'm ready to toss the router and get something else. Are there any settings I can change or reset before this router becomes garbage fodder?
View 1 Replies
View Related
Apr 2, 2011
I'm having an issue with a 2 week old WMP54G pci adapter. The behavior is as follows: I get a successful connection and excellent speeds, but every 10 seconds it stops transmitting and drops off the network for a moment. Then everything comes right back. 10 seconds on, drop, 10 seconds on, drop.I've investigated possible sources of interference, but there aren't any strong networks coming though on the same or nearby channels. Moreover, other devices sitting in essentially the same spot are connected consistently and show no variation in the signal strength.
Other info: OS is Ubuntu 10.10, the machine is a Dell GX270.
View 4 Replies
View Related
Feb 20, 2013
I have a asa 5510 vpn client groups configured and connected to the internal network DHCP server stops giving network service dhcp and the network goes down.
View 6 Replies
View Related
Apr 24, 2013
i have a 876 Router, connected to the Internet and a VPN. From inside i would like to pass all traffic destinied to 192.168.0.0 255.255.255.0 to the VirtualPPP IF and al the other to the Internet (vlan2) I have created this rule, but after applying ist works only for about 30 to 60 seconds. after that only the Internet reachable. Everytime i do a clear ip nat trans * both Interfaces will work für 30 to 60 secs again...
This is the relevant part of the cfg
ip nat inside source route-map Di1 interface Virtual-PPP1 overload
ip nat inside source route-map VLAN1 interface Vlan2 overload
!
access-list 1 remark CCP_ACL Category=2
[Code].....
View 5 Replies
View Related
Sep 5, 2008
I have a linksys system WRT54G at home. I had no problems with the Linksys router until about a month ago when I decided to make it a secure network. I run three computers of the wireless router (1 desktp and 2 laptops) Since making the wireless network secure I can not connect with my business laptop IBM Thinkpad X40, but thother e computers work just fine.
View 8 Replies
View Related
Oct 14, 2011
I'm having is that every few hours my TCP/IP protocol stops working. The modem lights remain normal but I can't connect to anything. The only thing that works on the internet is traceroutes at the command prompt which function normally. The solution is that I have to reboot and then everything returns to normal until a few hours later when it happens again. There are no error messages on any of my browsers. The page just goes white immediately. When I try to retrieve my email, I get a message about the TCP/IP isn't working.
View 9 Replies
View Related
Mar 23, 2011
On Windows XP, my integrated NIC stops working after hosting a server. The server starts fine, ports are forwarded, firewall is down, modem is fine, but when I receive a connection, it shows they have made a connection, but then they drop, as do I. I can't browse or ping anywhere. I have to physically disconnect, then reconnect the ethernet cable to the port, or restart the computer. Upon ipconfig, the adapter is set with the Windows default ip (169.x.x.x) and cannot be /release'd or /renew'd.
View 10 Replies
View Related
Mar 4, 2012
It's fairly hard to explain what happens but basically, say I'm playing some type of online game, all of a sudden anything server sided such as HP amounts, damage amounts, etc. just disappears but the animation runs fine such as attacking being hit, etc. All of a sudden it'll jump forwards and I'll take any damage and do any damage that had been happening until the issue started. This happens constantly and it's really frustrating but on top of that my internet will slow to a crawl..Say I'm trying to send a message on Skype, it won't send for the longest time and I won't be able to recieve any or even open a new webpage until the problem fixes itself.'ve looked around a bit and thought I fixed the issue, I'm on wifi and multiple devices are connected but not always in use, and the forum I found suggested an ip conflict and said to open up command prompt release the ip with ipconfig /release and then renew it with ipconfig /renew.
View 3 Replies
View Related
Mar 22, 2012
Once every couple of days the wireless service seems to disappear. I've connected to the router from a wired computer and everything looks ok from the d-link panel, however its not showing up as an available wireless network on the wireless units. Pulling the power off for 30 seconds tends to get it working again. I'm configured bg and n. I need a mix... an old B laptop, have one machine that has a G NIC, and the rest are N.
View 14 Replies
View Related
