D-Link DIR-655 :: Router Stops Loading Webpages But Internal Network Still Works
Apr 27, 2011
I bought a DIR-655 for my parents after their old router died in a planned power outage. It's a rev. B1 model running the 2.00 firmware. It worked fine initially for a day or two with great wireless coverage, even in the previously low-signal spots in the house.Then the problems started. The router now has trouble loading any website. What you get is instead a page returned from the router saying something along the lines of "network unreachable, please check you internet settings" (I will go there today or tomorrow so I'll update the post with the specific error). Refreshing the page a few times sometimes makes it load, but extremely slow and then the same thing happens again a few moments later. The same thing happens on both wifi and through the router's LAN ports. If I connect a computer directly to the modem it works just fine, as it has always done before getting this router.I have disable QoS, NAT endpoint filtering and the firewall (SPI). I have also set the WAN port speed to 100Mbit/s in the router, to match what the modem is set to (also had issues with the default setting).
View 7 Replies
ADVERTISEMENT
Sep 17, 2011
I've got a strange problem with my internet connection. I have recently moved and brought my desktop with me. While I am able to connect to the internet in my new place, a weird problem arises: whenever I try to access a new webpage, there is a consistent 5-10 seconds delay before the page actually loads. After the initial delay however, the webpage will load quickly. This problem will repeat itself whenever I try to access a site that is not cached. I have tried switching ethernet cables/wireless adaptars and this problem persists. I have also tried scanning and cleaning my computer yet nothing works. Speedtest.net show that my ping, d/l and upload speed are all fine.
PS: Just to add some information, my new place comes with its own existing router (the building includes internet into its rent), and I am simply plugging an ethernet cable from my computer to it. In addition, my roomates and my laptop seem to be able to access the itnernet fine with this problem. Since this sounds a lot like a DNS problem, I have also tried using OpenDNS and that doesn't work either. In addition, the delay persists regardless whether I am trying to access a website via its domain name or numerical IP address.
View 3 Replies
View Related
Jan 21, 2013
Iam running Windows XP sp3 ,firefox browser and my router and modem are fine. iam getting transferring /waiting for 5 minutes before it loads. each transaction on the page takes minutes. Ive disabled/repaired/enabled internet connection" several times with no success. Where can I look in my system?
View 2 Replies
View Related
Nov 20, 2012
i have 3 systems. 1 server,2 client(all installed with xp). internet connected to server machine. all systems connected to a switch. Internet sharing is ok but on client machine not loading webpages like facebook or yahoo. The client machine loads [URL] in amazing speed, but not loading any other webpages. I tried disabling the avast antivirus but no use. Server machine loads everything correctly. i am using windows xp in the host file '127.0.0.1 localhost' only cleared the history tested with 3 browsers (IE, chrome, mozilla) Nothing works.. MaxConnectionsPer1_0Server : 8 MaxConnectionsPerServer : 4 In the server machine, i have installed Comodo firewall "ping facebook.com" shows no problem!!(in both server and client)
View 1 Replies
View Related
Mar 5, 2013
I recently bought a Cisco SG200-26P and now loading webpages are sometimes very slow or don't load at all.I have to refresh to page to load at all and sometimes even restart safari to load the webpages.I have this on several macs and ipads.
View 3 Replies
View Related
Nov 8, 2012
Applications such as skype, teamviewer, etc, are all working fine, however, when I try to load certain webpages, such as Facebook and forum boards, they don't load, just stay white screen.
Youtube, google, both load, I imagine this is because they're both on the Google servers, apart from any Google related sites, I can't find any that will load for me.
I think this is a problem wth my DNS addresses, I've tried a range of solutions, clearing my DNS, changing my IPv4 address, restarting the router, PC, but I can't seem to find a fix.
Running on windows 7 Home premium
NOTE: I had the Metropolitan police virus yesterday, I did a system restore to remove it, my internet worked fine after, it's only since I've moved from the router at my other house, to the one here that I'm having problems.
View 1 Replies
View Related
Dec 16, 2011
While watching videos online (examples, youtube, twitch.tv videos (not stream)), the video stops loading arbitrarily, and won't start loading again unless i refresh the whole page. This happens reasonably frequently (4-5 times in a 20 minute video), but I'm not sure what is causing it. I'm running windows 7,
View 8 Replies
View Related
Jan 23, 2013
Where a 5510 running 7.2.4 code and being accessed via a web browser, stops initializing the main window at 87%?We can access the box via telnet and the CPU is running at 5%. The other error message is a warning the our OS is not supported by ASDM and we may encounter problems running the application.
View 3 Replies
View Related
Aug 24, 2012
Internet works fine for a few minutes(around 2-5 usually), then it completely stops. It doesn't say it was disconnected, it just stops.Wireless has been working just fine the past few days.) We have used a desktop computer with this type of setup before and it worked just fine, that desktop was like a 2001 Dell that could barely stay on.
View 5 Replies
View Related
Mar 27, 2013
Region : Malaysia
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : Celcom
There is a website that does not load when the router is in a certain setting. The website I tried to access was url...I have tried the different firmwares and settings and have narrowed it down to the AES encryption.Have tried the original 120328 firmware, works perfectly with all different settings.With the 120822 firmware, it works with all settings EXCEPT when AES is chosen as the encryption method, be it using WPA or WPA2 Personal.
I therefore pinpoint the AES encryption mode in the 120822 firmware to have a bug. I need to use 802.1n with AES, rather than TKIP.Can someone else using 120822, with AES encryption for wireless, verify that this is happening for them too?
View 2 Replies
View Related
May 20, 2012
Whenever I use my router web pages often fail to load. Then after about 30 or seconds or so it will start working again. Even worse,if I go to game online I will have lag like crazy. Even if I am the only one on the router.I'm using a D-Link n300 gigabit router.
View 5 Replies
View Related
Apr 2, 2011
My internet connection works for 5 minutes and then stops .. works again for 5 minutes and then stops..... I'm using windows 7.
View 1 Replies
View Related
Feb 24, 2013
I have a lenovo v570 with 6gb of ram installed running windows 7 sp1 64 bit along with an intel centrino wireless-n 6150 card. After multiple fresh installs of windows 7 I have been unable to get my wireless card to work until I flashed the bios. After I start windows again I am able to use wireless, that is until I reboot. I get an error that the device cannot start (code 10). I thought there was something wrong with the hardware itself yet every single time I perform a bios flash the wireless works just wonderfully and never disconnects. I kept my laptop on for 3 days and wireless worked fine until reboot. I also noticed that it shows 6gb of RAM is available and then after the reboot I only noticed 5.92gb of RAM available. I don't know if this is a clue as to what is going on but I am investigating this matter myself now. I have yet to find any fixes and I am just looking into the matter personally as there is no reason to use an external wireless card if the internal will work properly. I refuse to be defeated by such issues. I am going to attempt to do a bios flash where I know wireless will work and use older drivers and systematically go down the line to see if a reboot makes the wireless fail on any other supported drivers. Currently Lenovo and Intel has numerous drivers and all tested have been failures so it's time to back to something older and even potentially another models drivers entirely. I would also like to point out that my bios does give me an option to enable/disable wifi as well as a switch on the laptop. I checked to see if either one of these are faulty and neither seem to be. I did notice a bug that the bios update supposedly fixed which happened to be where the boot order made a difference on whether the wifi worked or not. It seems that if the cd was in the boot order first it would prevent the wifi from working.
View 1 Replies
View Related
Apr 20, 2011
Does anyone know of a system that works like an internal version of Akamai? I'm looking to be able to distribute content from different locations across our network (with one URL) and I'm looking for an elegant way of doing so. Is there a product out there that does this sort of thing already?
View 7 Replies
View Related
Jun 20, 2011
I have a DIR-655 with both wired and wireless connections. Yesterday, network stopped working on one wired machine while using it to surf the internet and a 2nd wired machine has not worked in 3 weeks after moving it from one room to another. Wireless connections are working fine.
-2 wired systems (Windows 7 and Windows XP), both stopped working
-2 wired Xboxes - working fine
-2 laptops, wireless working fine
-1 smart phone, wireless working fine
I've power cycled my DSL modem and DIR-655 multiple times.Power cycled computer multiple times. Tried Win7 built-in diagnostics.Tried setting up static IPs.Tried filling in preferred DHCP server address.Disabled Windows firewall. [code]
View 4 Replies
View Related
Dec 8, 2012
Region : UnitedKingdom
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version :
ISP :
certain websites couldn't be accessed on any of our devices (mixture of PC's, android and apple devices)After trying everything I could think of and even phoning our internet provider nothing would get the sites to load (Facebook, hotmail to name but two)A friend of mine also said he was having exactly the same problems whereas no one else I know had any problems!.Anyway, after much scratching of head with resetting the router to factory defaults etc the only thing left to test was a direct connection with the modem where all websites worked perfectly!So the problem is 100% the router! Even after a factory restore it still doesn't work with those websites and after talking to my friend it turns out he too has a tp-link router but a different model.
View 3 Replies
View Related
Dec 5, 2011
My router just dropped the internet. I checked with ISP and confirmed that their modem is fine - I can connect direct into that - but the DIR-655 won't connect externally. I've tried wireless and wired and can connect fine to the router, but it is like the firewall has reset itself or something. at the moment I'm surviving because of a 30m long ethernet cable to the modem going out the window and round the house!
View 5 Replies
View Related
Dec 5, 2012
Since the power failure two days ago, my -ASA stops forwarding traffic to internal servers, for no apparent reason. Packet trace shows all OK, packet capture buffer stays empty when I try to http into the mail server. The only way to get it working is to change the Outside Ip to the one used for mail, then to change it back. It will work OK for a few hours, then stop, with nothing obvious in the logs.
View 2 Replies
View Related
Jan 25, 2012
I just recently purchased a dell latitude E6400 laptop and I did a clean install of Windows 7 Ultimate 64-bit on it, not an upgrade. I also installed service pack 1 right after the OS install. My problem is I cannot find a single driver that allows my WiFi card/connection to show up in Windows. I have been browsing the internet like a fiend and cannot find a single driver or solution anywhere for this. Every install or driver I try either shows an error saying "incompatable" or just does not fix the issue. All I want is my WiFi card to work, and dell did not have any drivers that worked off of its support site even when I put in my service tag number. compatable driver for the WiFi card for windows 7 64bit? Or steer me in the right direction to get the WiFi working on my laptop?
View 4 Replies
View Related
Jan 2, 2013
Region : Poland
Model : TL-WR941ND
Hardware Version : V3
Firmware Version :
ISP :
I have a problem with files sharing via wi-fi. I can not share files over the network using wi-fi connections. While the network is the cable connection sharing is available. The network also acts as one computer is connected by a cable to the router and the other via wifi. But if the two computers are working through wifi network does not work. Are there any settings in the router, which can cause blocking calls via wifi?
View 1 Replies
View Related
Mar 9, 2012
I have a D-Link N 300 Gigabit Router. It's only allowing me to download like 30 MB at a time. If I bypass the router, the internet works just fine.How do I fix that?
View 1 Replies
View Related
Mar 30, 2011
I just bought a dlink 655 from amazon and for some reason the router stops broadcasting on wifi. I cannot connect to it through my laptop or ps3. The only thing that fixes this is removing the plug from the back of it and putting it back in, once i do this, the SSID shows up once again and all is well until the next day (or 2 days after)
View 2 Replies
View Related
Feb 19, 2011
My D-Link DIR-655 will no longer let me pull up any web pages after several hours. For example, it works great when first rebooted, but the next morning web pages have timed out. When it is broken, I'm unable to connect to web pages via another wireless access point that i've plugged into the D-Link. I'm unable to use any of the wireless PCs or devices in my house.After it's rebooted, it works well for at least a few hours. It has the latest firmware and has basic, out of the box settings.
View 14 Replies
View Related
May 2, 2013
Previous setup without problems B1 Firmware 2.00
Cable modem>Router>4 computers + 1 wireless printer.. But i needed more ports so i bought a trendnet gigabit switch with 8 ports.
Then I Plugged port 4 on router to >switch port 1
When all the computers are turned on and using everything at once i cant access websites but my skype works so i figure its probably a dns issue and my dlink is overloaded? I didnt try to access any sites with the ip only fail on my part.
Once this happened i immediately unplugged everything and restarted the router. I only have my own computer hooked up the router and did a firmware upgrade to 2.10na and my internet works immediately after but when i hook up another comptuer to the network i cant access any pages but my skype works..
View 14 Replies
View Related
Oct 11, 2012
Turn SPI under (Advanced/Firewall) off (uncheck the box).
I was getting slow page loading on Google Chrome and I think IE but don't remember for sure.
Once I unchecked the box for SPI, pages loaded much faster and I didn't have to double-click on links.
View 1 Replies
View Related
Sep 29, 2012
I have been using a TP-Link WR1043-ND for a while now. It is configured as a dumb switch with DHCP disabled. Every other day or so, the device stops taking connections and I cannot access via the IP address. A simple power toggle resets everything immediately. Through this, the LAN connected devices never lose connectivity, I simply am not able to connect wirelessly or access the router via web browser.The only device I connect to the wifi is my phone, so it may actually be more frequently and I do not notice due to my low utilization (and I have 3G so I don't always notice right away if I'm connected). I have a WDTV Live SMP connected to one of the LAN ports and that functions non-stop regardless of the wifi. When the wifi is "down", my phone can see the network and attempts to connect. Sometimes it times out, other times I am repeatedly prompted that the password is incorrect, even though I am POSITIVE that I am entering it correctly. Once I toggle power on the router, the phone connects fine with the stored password.
I have updated to the latest firmware (about a month or so ago): Version: 3.13.12 Build 120405 Rel.33996n My hardware version is: WR1043ND v1 00000000 The router is connected (via LAN port 1) to a wall drop. My upstairs roomate maintains the gig switch and modem, as well as handling the network admin. I simply am using the router as a switch to provide extra ports and broadcast the network over wifi in my apartment.All that said: I need troubleshooting this router and it's configuration before I consider buying a more expensive replacement (and if I go this route, I might add a small switch as well to give me more than 4 LAN ports to work with). I am also considering flashing to DD-WRT before replacing as well to see if that makes a difference in reliability and uptime.
View 2 Replies
View Related
Mar 30, 2011
My router is running the stock 1.21 firmware and it has been fine for almost a year before the wireless suddenly stopped working. I reset the router and restored my previous configuration. After the reboot, the SSID is visible and I can connect to it but there is no internet connection. Also the router becomes unresponsive, i.e. timeout trying to access the router configuration page. After trying out different settings it seems that enabling WPA2+AES is the cause.In the mean time, I am running an open wireless network and everything seems fine. Is the hardware faulty? I am reluctant to update the firmware because of a negative experience with another router (same model).
View 2 Replies
View Related
Mar 29, 2013
Every so ofter, the switch of the router just stops moving traffic between the LAN and to/from internet, though the WiFi keeps working and can still use internet.
I can still use the router's switch, and ping other computers on the local LAN, what happens is that the router stop routing wired traffic from/to internet, the rest of the issue is still the same, I opened reddit on my smartphone and there it was working via WiFi, but the would have none of it for the computers on wired LAN, not even accessing the router's page or telnet.
It is like some service or bridge between the switch LAN and the router itself dies... I'm still clueless.
The only "pattern" that I see is that my desktop is on line, because I can be not at home for 12+ HS and I can connect remotely to the server (rd p and trans droid) so I know it has internet access, but sometimes I think this happens when I turn on my desktop, like just now, this morning, but again, I feel is not every morning, trying to be more scientific about it I come here after every time it happens to record it, and also set the record straight about the issue description.
So, assuming it is not a hardware issue, because I did not had this problem in all 2011 and 2012, I do not overclock the router neither use other than default TX power level.
- How do I begin diagnosing this issue?
- If it is a known issue with this builds? I could no find it.
My goal is to be able to provide info for debugging the problem and possible finding a fix/workaround it. If it is indeed hardware failing, how do I even begin to diagnose it from that POV? The message is empty...
Even with the new build r21061 still happened two more times. Now the real problem to me, is that I cant even revert it to stock firmware, I tried even with:
- unplug router
- press and hold reset
- plug router
- keep pressing until power led blinks orange
- enter 192.168.0.1 (PC must have static IPA, i use 192.168.0.200)
Can't open 192.168.0.1 in FF nor chrome and does not even ping. [URL]. I just want to get it back to stock or do not hang up the switch-to-router(ing).
View 1 Replies
View Related
Aug 11, 2011
Since the blackout beginning of this week from dlink I had to reset my camera totally to operate it again. works now again with iphone and with mydlink. But it only works as long it is connected via lan cable to my router. I accessed the set up (via ipaddress) and entered the router details to the setup but as soon I disconnect from lan it does not work anymore. What did I oversee.
MAC OS X
Airport extreme
View 1 Replies
View Related
Jan 5, 2013
My Dir-615 E1 5.01 works fine, daughters Iphone, laptop connect fine. My Droid Max android phone connects with no problem but does not load web pages or sites. Phone does work great at other wifi spots just not at home with this DLink. My last android phone acted the same way, cannot use wifi at home! Not a password issue cause it does connect and has strong signal.
View 3 Replies
View Related
Dec 5, 2011
webpage A will take 1 second to load, and webpage B will take 6 seconds to load. After a browser refresh, webpage A might take 5-8 seconds to load, and webpage B will take 1 second to load.
Hardware rev A1 Firmware 1.13NA
Router is about 2 years old.
I tried resetting the router prior to the firmware update, no different. This is happening on both PC's. I tried a direct connect to the modem, and it seemed to work fine, but this doesn't always happen.
View 13 Replies
View Related
Dec 9, 2012
Region : UnitedStates
Model : TL-WR841N
Hardware Version : Not Clear
Firmware Version : 3.12.5 Build 100929
ISP :
I have the WR841N v6/v7 Firmware 3.12.5 Build 100929
The router stops showing up after 30 minutes to 1 hour. If I switch it off and on , it starts working normally but again suddenly stops and cannot be detected after 30 mts- 1 hour.
View 6 Replies
View Related
Jul 29, 2011
As of two days ago my DIR-655 seems to have stopped loading webpages every 10-30minutes for periods of up to 5-15 minutes, as in they the reloading icon will constantly be circling and the webpage remains blank, no error or anything until it says failed to load on my web browser (tried multiple browsers such as Safari, Chrome, IE and Firefox). This problem occurs on every computer on my network, laptops (both Mac and PC) and desktops. When this problem occurs all lights on modem and router seem to be normal no signs of anything going down but I originally thought that this affected wired and wireless but I seem to have narrowed it to culprit being the wireless. When connected to the PC I can browse for an indefinite amount of time without the webpages failing to respond, however when I connected to WiFi through Airport on a Macbook Air my webpages start to begin failing to load around 5-10 minutes of browsing which affects all computers connected to the network (essentially all computers failing to respond to the internet during this outage).
Interestingly when this problem occurs, if I am connected to Skype or Aim it will stay connected and I can still chat with people but I will not be able to sign onto AIM if the problem occurs before I sign on and I try to sign on during the outage. If I am streaming a video from justin.tv or ustream it still continues to stream during this "outage".I have the revB of the DIR-655 and have tried resetting the modem, turning off the firewall, upgrading firmware to 2.03NA from 2.01NA and setting the MTU to 1400 (default 1500) with nothing working. I am using Time Warner Wideband ISP and have connected the modem directly to my PC and for the 30minutes or so that I tested the web browsing it seemed fine and did not have any errors.
View 14 Replies
View Related
