D-Link DIR-615 :: Wired LAN - Switch Of Router Just Stops Moving Traffic
Mar 29, 2013
Every so ofter, the switch of the router just stops moving traffic between the LAN and to/from internet, though the WiFi keeps working and can still use internet.
I can still use the router's switch, and ping other computers on the local LAN, what happens is that the router stop routing wired traffic from/to internet, the rest of the issue is still the same, I opened reddit on my smartphone and there it was working via WiFi, but the would have none of it for the computers on wired LAN, not even accessing the router's page or telnet.
It is like some service or bridge between the switch LAN and the router itself dies... I'm still clueless.
The only "pattern" that I see is that my desktop is on line, because I can be not at home for 12+ HS and I can connect remotely to the server (rd p and trans droid) so I know it has internet access, but sometimes I think this happens when I turn on my desktop, like just now, this morning, but again, I feel is not every morning, trying to be more scientific about it I come here after every time it happens to record it, and also set the record straight about the issue description.
So, assuming it is not a hardware issue, because I did not had this problem in all 2011 and 2012, I do not overclock the router neither use other than default TX power level.
- How do I begin diagnosing this issue?
- If it is a known issue with this builds? I could no find it.
My goal is to be able to provide info for debugging the problem and possible finding a fix/workaround it. If it is indeed hardware failing, how do I even begin to diagnose it from that POV? The message is empty...
Even with the new build r21061 still happened two more times. Now the real problem to me, is that I cant even revert it to stock firmware, I tried even with:
- unplug router
- press and hold reset
- plug router
- keep pressing until power led blinks orange
- enter 192.168.0.1 (PC must have static IPA, i use 192.168.0.200)
Can't open 192.168.0.1 in FF nor chrome and does not even ping. [URL]. I just want to get it back to stock or do not hang up the switch-to-router(ing).
View 1 Replies
ADVERTISEMENT
Jun 20, 2011
I have a DIR-655 with both wired and wireless connections. Yesterday, network stopped working on one wired machine while using it to surf the internet and a 2nd wired machine has not worked in 3 weeks after moving it from one room to another. Wireless connections are working fine.
-2 wired systems (Windows 7 and Windows XP), both stopped working
-2 wired Xboxes - working fine
-2 laptops, wireless working fine
-1 smart phone, wireless working fine
I've power cycled my DSL modem and DIR-655 multiple times.Power cycled computer multiple times. Tried Win7 built-in diagnostics.Tried setting up static IPs.Tried filling in preferred DHCP server address.Disabled Windows firewall. [code]
View 4 Replies
View Related
May 6, 2010
I am experiencing a problem on a Catalyst 4510 (cat4500-ipbasek9-mz.122-53.SG.bin) with 802.1x configured. Client PCs are connected via a mini desktop switch to a Cat 4510 switched port in multi-auth mode. The configuration of the port follows:
!interface GigabitEthernet2/34 switchport mode access ip arp inspection limit rate 30 authentication host-mode multi-auth authentication port-control auto authentication periodic authentication timer reauthenticate server dot1x pae authenticator dot1x timeout tx-period 5 dot1x max-reauth-req 6 spanning-tree portfast ip verify source vlan dhcp-snoopingend
It happens from time to time that the Cat 4510 port stops passing traffic. Reconnecting the mini switch recovers the communication. Client PCs connected to the mini switch seem to be authorized at the moment when the problem occures. The RADIUS Termination-Action attribute is set to RADIUS-Request. The problem is not present if "authentication periodic" is disabled.
View 1 Replies
View Related
Apr 15, 2012
Upstairs I have my internet coming in with a Comcast modem/ router ( I will be bridging this b'cuz it sucks as a router). Also, I have my Dir 655 upstairs that I will use for wireless. and I have my dir615 downstairs and I want to use it as a basic switch/wired router. How do I set up my dir615 as a switch/wired router?
View 1 Replies
View Related
Apr 15, 2013
I have a 2 cisco switches that are at different sites one is a Cisco CAT4500 and other 3560. The connection between the switches is a layer 2 fibre link. CAT4500 and 3560 both have VLAN interface ip addresses in order for me to connect to the switches.
I have PC A connected to CAT4500 and PC B connecting to 3560. All these devices are the same VLAN and in the same subnet. I do have trunk links all the way though allowing this vlan as we run vlans. From PC A, I can ping CAT4500, 3560 and even PC B. This tells me everything is fine regarding Layer 2 & 3.
As soon as I move PC B and connect it to the other switch CAT4500 or move the other PC vice versa (this happens in both directions). Both switches learn that the mac address has moved locations and updates its mac address table accordingly. So when I do a show mac address table and show arp, everything has learned and moved fine. However when I try to ping any other device from PC B I cannot. So the 3560 switch PC B was originally connected to, I can no longer ping, the switch cannot see the pc also. It is as if PC B has not learned anything from the switch and cannot respond or reply to any icmp. I have tried this with different end devices, same thing. I am now thinking it has something to do with the switch.
View 14 Replies
View Related
Mar 6, 2012
So I have a current port-channel between two 6ks that I need to upgrade. There's too much traffic and the port buffers on the SUP7203B sort of suck. Microbursts are causing overruns like mad. Im going to move the 2x1gig port-channel to a 6724 and make it a 3x1gig port-channel. The switches carry production traffic across the link to the tune of about 400 meg during the lowest load time. Initially, I thought that I couldn't move the port channel without temporarily taking down the link but I think I have a workable solution now. Has anyone done this successfully before? Im curious what others have done. Also, to make matters worse, the existing port-channel is 'mode on' and I want to migrate to 'mode active' in the new channel
View 7 Replies
View Related
Mar 14, 2012
I have the same problems with the Cisco EPC3925?Everytime a wired pc reboots/boots everyone on the network losses internet, also wireless is disconnected. Also everyone get unidentified network and later its set to public network.We are using a Sitecom switch LN-120. I have to unplug this switch, then restart the router to fix the problem each time. Then I can plug it in again and everything is fine.The router will not restart (does not go further then 2nd blinking LED.) if I do not unplug the switch.
View 8 Replies
View Related
Jan 17, 2011
Bought a Cisco RVL200 (latest firmware included - I checked), and I've set it up to serve as the gateway/firewall for my home network. I also intend to use the VPN functionality when travelling as well as serving up content from a web server behind it. All of this seems to work the way it is intended (after quite a bit of fiddling).
The problem however is that if it comes under any sort of load it simply stops responding - physically it looks alright with the expected leds being lit, just as it would when functioning normally. It does not display the management interface, nor does it even respond to ping (which it does when it works). If I start up a bittorrent client on any of the machines on the internal network and add a torrent to something popular like Ubuntu Linux it'll usually start downloading and then after 5-15 minutes the RVL200 will have stopped responding. Tried adding QOS settings to limit the computer running the client or downprioritize this type of traffic, but that does not seem to have any effect.
View 1 Replies
View Related
Mar 9, 2012
I have a D-Link N 300 Gigabit Router. It's only allowing me to download like 30 MB at a time. If I bypass the router, the internet works just fine.How do I fix that?
View 1 Replies
View Related
Mar 30, 2011
I just bought a dlink 655 from amazon and for some reason the router stops broadcasting on wifi. I cannot connect to it through my laptop or ps3. The only thing that fixes this is removing the plug from the back of it and putting it back in, once i do this, the SSID shows up once again and all is well until the next day (or 2 days after)
View 2 Replies
View Related
Feb 19, 2011
My D-Link DIR-655 will no longer let me pull up any web pages after several hours. For example, it works great when first rebooted, but the next morning web pages have timed out. When it is broken, I'm unable to connect to web pages via another wireless access point that i've plugged into the D-Link. I'm unable to use any of the wireless PCs or devices in my house.After it's rebooted, it works well for at least a few hours. It has the latest firmware and has basic, out of the box settings.
View 14 Replies
View Related
Apr 22, 2012
On the basement level, and on level 2, I have in wall junction boxes where the Cat5E Ethernet wires come together. There are 6 lines that go from the level 2 box to 6 wall jacks on levels 2 and 3. There are also 6 lines that go from the basement box to 6 wall jacks in the basement and on level 1. There is also a Cat5E line running between the two boxes.I have wired all these plugs on both ends with T568B standard, and in each box they go into a patch panel. I have used a cable tester to test and make sure all these plugs are properly wired. I have also tested individual computers hardwired linked through to my router (without going through switches) and confirmed that they work that way, so I'm pretty sure I've wired it correctly.
At the second floor box, I have an AT&T 2Wire wifi router and modem, with AT&T Uverse service. I also have a monoprice Ethernet switch. In the basement box, I have another monoprice Ethernet switch (link to the type of switches I have is below). The switches are connected together via the Cat5E that runs between the boxes, and the second floor switch is connected to a free port on the back of the AT&T 2Wire Uverse wifi router.These wall plugs are not all currently used. In fact the problem I describe below occurs even if nothing is plugged into the wall plates.My problem is: when I hook up everything, so my wifi router is wired to the first switch, which is in turn wired to the 6 wall plugs upstairs as well as to the switch in the basement, and that basement switch is in turn wired to the 6 wall plates downstairs... at that point when I plug it in, my wifi stops working. Basically, whenever my router is plugged into this hard wired network, the wifi stops working. When I unplug the network, the wifi comes back (I usually reset it, not certain if it would come back just from waiting).
Interestingly, it doesn't necessarily stop working if most or all of the plugs are removed so the network is not connected (for example, if I just go through one plug instead of all of them)Does a network of wired Ethernet, even if not plugged into anything, cause some sort of a load or drain on the router that could make it stop working?
View 1 Replies
View Related
Mar 5, 2012
I have an EuroDOCSIS 3.0 cable modem from UPC Romania. It's a Cisco EPC3925, wireless modem.
My problem is that most of the time (like 80% of the time) when someone is starting or closing a PC that is connected using a wire, the whole internet crashes (wired PCs get a ! sign and the internet stops working and wireless PCs are getting disconnected completely from the network being unable to reconnect). This is solved by restarting the modem (unplugging/replugging it) or waiting for it to reconnect. I want to mention that during this process the modem lights show that everything is ok and nothing special happens.
First of all I called UPC technical support and the man there said that I should try to disable the firewall from the modem (which I had disabled already), if it won't work then to try to reset the modem to the factory settings (as I was thinking to do - because I configured the settings as I wished) and if this won't work then calling them back to change the modem.
I tried to reset to the factory settings and that didn't work at all after running tests over one week. After that I called UPC and they said that the modem is for sure the problem, they sent a technician (today) who also said that the modem is the problem. Ok ok, the technician replaced it and everything seemed to be good.
30 minutes ago my father started his PC and what should I see? Bam, internet crashing. 5 minutes ago i closed as well my PC and what should I see? The internet crashing again.
View 19 Replies
View Related
Aug 8, 2011
My RV016 does not seem to route traffic that does not originate from the subent that it sits on. For example, I have my RV016 on 192.168.1.1 and a gateway to 192.168.2.0/24 is at 192.168.1.2. None of the traffic originating in 192.168.2.0 is routed by the RV016. I have checked the routing tables and ACLs with no luck. I know the traffic is hitting the RV016 because I setup a packet sniffer. The packets just simply die there. Is this a limitation of the RV016 only being assigned to a single class C? Does it also ignore all internal traffic not from that class C even if the ACLs are open?
View 1 Replies
View Related
Jul 25, 2011
if the firewall rules in the RVL200 work for inter LAN routing as well as LAN<->WAN? I need 2 separate networks in a house, 1 for business 1 for family, and I want to only allow my IP on network 1 (family net,10.0.0.0/24) access to network 2 (business net 10.0.1.0/24). I want this as if I change rooms were a access point for business is not available I can use the home net and specific IP to access certain business net IPs. I saw you can turn inter vlan routing on or off, but it wasn't clear on firewall rules.know of a similar router in cost but with gige instead of 100Mb ports?
View 1 Replies
View Related
Nov 15, 2011
link where to download user manual and/or Technical manual for Linksys RV042 Dual WAN VPN RouterDoes the Linksys RV042 Dual WAN VPN Router AGGREGATE the bandwidth of the two WAN Ports for LAN use or how does it operate?Does it manage traffic on Layer 7 (Application Layer);can i configure say, yahoo messenger traffic to take priority over youtube traffic or http traffic over download/upload traffic or such?Does it have DYNAMIC bandwidth allocation/management feature?Can i Guaranteed Bandwidth Allocation for a particular user or IP Address?Does it have TCP Ack Prioritization feature?Can i direct site(s) traffic,say cisco.com and/or port or service to use a particular WAN port?If this product cannot handle this features?
View 1 Replies
View Related
Mar 23, 2011
I have a very strange problem on 2 (independent) Cisco 861 routers in different places.They are both configured as easyVPN servers. One uses UDP, the other TCP. VPN clients connect by using Cisco VPN client software. This cannot be changed because the customer expects it this way. Both routers have the same problem:
* the first VPN connection after a reset works fine. Traffic passes through and it is perfectly usable. I can ping the internal network interface on the router side from the client without problems.
* the second connection (and all subsequent ones from different client machines etc.) connects fine, no errors on the client whatsoever (not sure I evaluated all possible debug output on the "server" side). However, no traffic passes through. Pings do not come back from the 861 anymore through the VPN tunnel.I already enabled ICMP debugging and saw that pings are actually answered by the 861, but do not reach the client.The same seems to happen to any and all other packets as well.
* If I restart the 861 the very same thing happens: first VPN connection works fine. You disconnect, try another connection from the very same client computer, and it does not work anymore until the next router reset.I append the configuration for sake of completeness. confidential parts are represented by XXX. Some ACLs are not in use right now; I used them for testing. [code]
View 17 Replies
View Related
Feb 12, 2012
We have a managed service provider voip network that requires us to use our own router for the data network. We wanted to use the RV042 for it's easy vpn setup. After installing it worked great for about 10 min. then the WAN port stopped passing traffic. 3 min. later it started working again. We tested the RV042 on a different network and it works fine. We tested an older Pix on the managed network and that works fine. But the RV042 will not work on the managed service provider voip network. The service provider says that on their end it shows our WAN port going up and down.
View 1 Replies
View Related
Sep 29, 2012
I have been using a TP-Link WR1043-ND for a while now. It is configured as a dumb switch with DHCP disabled. Every other day or so, the device stops taking connections and I cannot access via the IP address. A simple power toggle resets everything immediately. Through this, the LAN connected devices never lose connectivity, I simply am not able to connect wirelessly or access the router via web browser.The only device I connect to the wifi is my phone, so it may actually be more frequently and I do not notice due to my low utilization (and I have 3G so I don't always notice right away if I'm connected). I have a WDTV Live SMP connected to one of the LAN ports and that functions non-stop regardless of the wifi. When the wifi is "down", my phone can see the network and attempts to connect. Sometimes it times out, other times I am repeatedly prompted that the password is incorrect, even though I am POSITIVE that I am entering it correctly. Once I toggle power on the router, the phone connects fine with the stored password.
I have updated to the latest firmware (about a month or so ago): Version: 3.13.12 Build 120405 Rel.33996n My hardware version is: WR1043ND v1 00000000 The router is connected (via LAN port 1) to a wall drop. My upstairs roomate maintains the gig switch and modem, as well as handling the network admin. I simply am using the router as a switch to provide extra ports and broadcast the network over wifi in my apartment.All that said: I need troubleshooting this router and it's configuration before I consider buying a more expensive replacement (and if I go this route, I might add a small switch as well to give me more than 4 LAN ports to work with). I am also considering flashing to DD-WRT before replacing as well to see if that makes a difference in reliability and uptime.
View 2 Replies
View Related
Mar 30, 2011
My router is running the stock 1.21 firmware and it has been fine for almost a year before the wireless suddenly stopped working. I reset the router and restored my previous configuration. After the reboot, the SSID is visible and I can connect to it but there is no internet connection. Also the router becomes unresponsive, i.e. timeout trying to access the router configuration page. After trying out different settings it seems that enabling WPA2+AES is the cause.In the mean time, I am running an open wireless network and everything seems fine. Is the hardware faulty? I am reluctant to update the firmware because of a negative experience with another router (same model).
View 2 Replies
View Related
Feb 24, 2013
In our USA office we have a RV042 router and in Venezuela we have a RV082 router. We have connected a VPN tunnel (gateway-to-gateway) between both offices.
The point is: How could we redirect the internet traffic from our Venezuela office (RV082) to the USA Office (RV042) to navigate using USA public IP's?
The reason for this is that we need to use online streaming services which are only available for IP's from USA and we can't use them from the Venezuelan IP's.
We can not use the PPTP option since the equipment which will use the streaming services (like hulu, crackle, etc.) in Venezuela is a Google TV device which doesn't allow the configuration of proxy navegation or PPTP VPN connections itself. That's the reason why we need to do that through the routers.
View 1 Replies
View Related
Feb 12, 2010
BEFSX41 V2.1
Firmware: 1.52.16
The manual states how to create an inbound traffic policy but if you follow the directions there is no place to select inbound traffic.From the manual: To Create an Inbound Traffic Policy1. Enter a Policy Name in the field provided. SelectInbound Traffic as the Policy Type.2. Enter the IP Address from which you want to block.Select the Protocol: TCP, UDP, or Both. Enter the portnumber or select Any. Enter the IP Address to whichyou want to block.3. Select Deny or Allow as appropriate.4. By selecting the appropriate setting next to Days andTime, choose when the Inbound Traffic will be filtered.5. Lastly, click the Save Settings button to activate thepolicy.When finished making your changes on this tab, click theSave Settings button to save these changes, or click theCancel Changes button to undo your changes.I want to filter out a range of ip addresses from trying to connect to my network.
View 3 Replies
View Related
Aug 1, 2012
I have an RV042 router and I'm looking to monitor the total upstream and downstream traffic from within the router. I know there is tons of software that I can put on a netowrk computer to monitor traffic, but is there any software that I can put on the router itself that will monitor the traffic from within the router?
View 1 Replies
View Related
Feb 9, 2013
I run a AirPort Extreme router. I have my F9K1106 range extender set up and working. works awesome. I get home from work the next day and the range extender seems to fall asleep , it won't pass any traffic. I power cycle it and its back up and running. this happens everyday no fail for a week now.
View 1 Replies
View Related
Aug 8, 2012
Cisco ASA 5510. Between 5 to 10 minutes of reseting the asa traffic stop accessing outside ip addresses. Ping from console fails to ISP router IP. Ping to google name server failes. I have reset to factory default only setting up nic and natting and it still happens.
View 2 Replies
View Related
Feb 6, 2013
We have problems with 3 switches in our network.
Users continues receive adresse via DHCP, but no traffic was forwarded. After reboot switch works fine about one week and problem arrives.
I telnet to one problem switch and try to found reason by reaply acl and source guard and saw some strange message:
nov-20(config)#int r gi1-48
nov-20(config-if-range)#no service-acl input
nov-20(config-if-range)#service-acl input 2
Exceeded the maximum ACE allowed in the system. -repeated 48 times
Configuration and log int attachment (show tech-support)
port 52 - uplink, 1-47 - users, 49-51 - downlink switches (SPS224g4) with aprox 200 pc connected. 48-ups
View 11 Replies
View Related
Dec 9, 2012
Region : UnitedStates
Model : TL-WR841N
Hardware Version : Not Clear
Firmware Version : 3.12.5 Build 100929
ISP :
I have the WR841N v6/v7 Firmware 3.12.5 Build 100929
The router stops showing up after 30 minutes to 1 hour. If I switch it off and on , it starts working normally but again suddenly stops and cannot be detected after 30 mts- 1 hour.
View 6 Replies
View Related
Jul 29, 2011
As of two days ago my DIR-655 seems to have stopped loading webpages every 10-30minutes for periods of up to 5-15 minutes, as in they the reloading icon will constantly be circling and the webpage remains blank, no error or anything until it says failed to load on my web browser (tried multiple browsers such as Safari, Chrome, IE and Firefox). This problem occurs on every computer on my network, laptops (both Mac and PC) and desktops. When this problem occurs all lights on modem and router seem to be normal no signs of anything going down but I originally thought that this affected wired and wireless but I seem to have narrowed it to culprit being the wireless. When connected to the PC I can browse for an indefinite amount of time without the webpages failing to respond, however when I connected to WiFi through Airport on a Macbook Air my webpages start to begin failing to load around 5-10 minutes of browsing which affects all computers connected to the network (essentially all computers failing to respond to the internet during this outage).
Interestingly when this problem occurs, if I am connected to Skype or Aim it will stay connected and I can still chat with people but I will not be able to sign onto AIM if the problem occurs before I sign on and I try to sign on during the outage. If I am streaming a video from justin.tv or ustream it still continues to stream during this "outage".I have the revB of the DIR-655 and have tried resetting the modem, turning off the firewall, upgrading firmware to 2.03NA from 2.01NA and setting the MTU to 1400 (default 1500) with nothing working. I am using Time Warner Wideband ISP and have connected the modem directly to my PC and for the 30minutes or so that I tested the web browsing it seemed fine and did not have any errors.
View 14 Replies
View Related
Apr 27, 2011
I bought a DIR-655 for my parents after their old router died in a planned power outage. It's a rev. B1 model running the 2.00 firmware. It worked fine initially for a day or two with great wireless coverage, even in the previously low-signal spots in the house.Then the problems started. The router now has trouble loading any website. What you get is instead a page returned from the router saying something along the lines of "network unreachable, please check you internet settings" (I will go there today or tomorrow so I'll update the post with the specific error). Refreshing the page a few times sometimes makes it load, but extremely slow and then the same thing happens again a few moments later. The same thing happens on both wifi and through the router's LAN ports. If I connect a computer directly to the modem it works just fine, as it has always done before getting this router.I have disable QoS, NAT endpoint filtering and the firewall (SPI). I have also set the WAN port speed to 100Mbit/s in the router, to match what the modem is set to (also had issues with the default setting).
View 7 Replies
View Related
May 8, 2012
I have configured multicast (ip pim dense-mode) on two 2911 routers that are connected by a Multilink (3Mbps) Wan connection.The configuration work fine for awhile and sometimes all day but at some point one of the Multilink interfaces stop passing multicast traffic.I perform a sh multilink 1 on the interfaces and one interfaces show the multicast packets incrementing and the other does not, it just stops.The only fix for this is to hard reboot both routers and the multicast traffic begins to flow once again.
View 3 Replies
View Related
Aug 4, 2011
I have created an L2L tunnel between my self and a 3rd party. I am using a Cisco ASA 5520 and the other end is using a Cisco 3005 VPN concentrator. The tunnel will get established and pass traffic both ways for a little while, it varies, sometimes 1 hour or last time we built it it was working for 17 hours, but at some point my ASA will stop transmitting but it will still be receiving packets. These errors start to show up when I look at the traffic going through my ASA interfaces:
713042 IKE Initiator unable to find policy: Intf Outside, Src: 192.168.xx.16, Dst: 10.1.xx.30
Then when I try to ping their hosts .30 and .27 I get:
713041 Group = 68.23.xx.xx, IP = 68.23.xx.xx, IKE Initiator: New Phase 2, Intf private, IKE Peer 68.23.xx.xx local Proxy Address 192.168.xx.16, remote Proxy Address 10.1.xx.30, Crypto map (Outside_map)
713041 Group = 68.23.xx.xx, IP = 68.23.xx.xx, IKE Initiator: New Phase 2, Intf private, IKE Peer 68.23.xx.xx local Proxy Address 192.168.xx.16, remote Proxy Address 10.1.xx.27, Crypto map (Outside_map)
713050 Group = 68.23.xx.xx, IP = 68.23.xx.xx, Connection terminated for peer 68.23.xx.xx. Reason: Peer Terminate Remote Proxy 10.1.xx.27, Local Proxy 192.168.xx.16
When I first configured this tunnel it was with 3DES and SHA for phase 1 & 2, but when the tunnel would come up my phase 1 would negotiate to an MD5 hash, even though I specifically entered SHA, so me and the 3rd party decided to bring all the hashes for phase 1 & 2 down to MD5, and that was when it was up for the longest, but the problem still came back eventually. My ASA config posted below:
ASA Version 8.2(3)
name 192.168.xx.16 Server description Server
name 10.1.xx.27 XYZ_01
name 10.1.xx.28 XYZ_02
name 10.1.xx.29 XYZ_03
[code].....
View 1 Replies
View Related
May 7, 2012
I have configured multicast(ip pim dense-mode) on two 2911 that are connected by a Multilink( 3 Mbps) Wan connection.The configuration works fine for awhile and sometimes all day but at some point one of the Multilink interfaces stops passing multicast traffic.I perform a SH Multilink 1 on the interfaces and one show multicast packets incrementing and one does not, it just stops.The problem acts like there is a buffer that gets full and after that happens it just stops working.
View 2 Replies
View Related
Apr 18, 2013
I am trying to determine why Comcast Business Class modem configured with a static IP (IPV4) works with a laptop or Linksys Cable modem but not with a Cisco ASA 5505. After a few minutes, the 5505 stop passing web traffic. I am able to ping the default gateway even though I can not surf the web. Restarting the 5505 and the Comcast modem, web traffic flows for a short period of time, then stops. I can connect inside the firewall via ASDM 7.1.1 and via SSH. I can not connect via either from the outside. Comcast tech support indicated their router is working and is configured in bridge mode. I swapped out the 5505's memory, and then with another 5505. Nothing seems to resolve the issue. I am trying to determine if the 5505 or the Comcast router is not configured correctly.
Here are the parameters: The 5505 was reset to default factory settings via the command: config factory-default. Configured the outside interface with static IP Address followed by the no shutdown command, then removed DHCP features from outside interface. Added Comcast DNS servers, default route, ntp servers, configured DHCP features on the inside interface. Enabled HTTP/SSH (inside & outside interfaces) and ICMP echo-reply (outside only).
I believe the Comcast modem is not configured correctly. The show version and show startup output are below.
ciscoasa# show version
Cisco Adaptive Security Appliance Software Version 9.1(1)
Device Manager Version 7.1(2)
[Code].....
View 5 Replies
View Related
