Linksys Wireless Router :: E1500 / Vista Laptop - Local Access Only Connection Error
Jan 22, 2012
I upgraded my old Linksys wrt54g to the E1500. All the XP os are connected via cable and wireless connection, but the Vista laptop i get local access only connection error. This laptop used to connect on the older router using wep but with E1500 wpa-2 it cannot connect. I am unable to ping the router from the laptop wireless. Connecting ethernet cable it works fine and logging in as a guest works does too.
View 1 Replies
ADVERTISEMENT
Aug 24, 2011
I just purchased a new linksys e1500 and followed the steps on the cd to set it up. I have internet access on my windows 7 laptop and iphone however, I have "local access only" on the two laptops we have running vista. The router is working fine for the windows 7 machine and the iphone but I cannot connect to the internet on the two vista machines.
View 9 Replies
View Related
Dec 12, 2012
My Laptop will only connect to the internet if I directly connect the ethernet cable from the router to the computer. Otherwise it will 'connect' local only[CODE]
View 1 Replies
View Related
Nov 13, 2012
Local Access Only on Vista PC
I restored an old Vista laptop to out-of-the-box state to give to my Dad. This laptop had a wireless connection to the internet and network previously. After the restore, I can't get a connection to the internet, even though my router sees it and it has an ip address. It says Unidentified Network Local Access only, and it doesn't see any of the computers on the network. Sometimes the other computers see it but can't connect, sometimes, the other computers don't see it. I hate Vista.
Stats on Laptop:
Toshiba A215-S4747
Atheros AR5007EG
All my other eight devices have an internet connection no problem, but I powered off the modem and router a couple of times with no change. I tried updating the Atheros to the latest driver on Toshiba's website for this model, but it doesn't seem to take. If I uninstall the old drivers, Windows rudely just immediately reinstalls them again. If I just update the driver, and pick the new file, the driver version remains the same as the previous driver. I'm banging my head on the wall with the driver
Ping successful on:
192.168.1.11 (the laptop's IP address)
localhost
[Code]......
View 11 Replies
View Related
Feb 7, 2011
I've just recently bought a second hand Acire laptop is v.good condition, it does everything fine apart from connect via wireless.I have another laptop which can connect on it's wireless and the Acer laptop can get a connection if you use a network cable directly to the router.I have a Sky phone & Broadband package.
Working Laptop (XP) -IP config All -
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsAdministrator>ipconfig /all
[code]....
View 8 Replies
View Related
Aug 29, 2011
I have my wireless set up in my house. All other computers and devices can connect and get on the internet fine, except my laptop. I can connect to the wireless routers network but it says local only and wont let me on the internet. I tried using the cd to install the router settings on the computer but it never goes past 25% and gives me this information:Error code: 82BD0119Error description: The adapter connection timeout period expired.Model name: Linksys E1500Model number: E1500Serial number: (Removed)Firmware version: 1.0.01 build 4Operating system: Windows Vista SP 2Software version: 1.3.11027.1Connection type (WAN): DHCPIP address (LAN): 192.168.1.1IP address (WAN): 71.61.221.251Computer IP address: 0.0.0.0
View 1 Replies
View Related
Jan 31, 2013
I am having a problem with an adapter, but I don't know if it's a router issue, adapter issue or software issue.
Router: E1500
Adapter: WUSB100
OS: Win XP Pro SP3
System: Dell Inspiron 9400
When the laptop has gone into standby and comes back out it is not connected to the internet or the 'secured side' of teh router. Instead, it asks for the 'guest side' password. When I try running Wireless Manager it goes through the entire process of 're-mating' adapter and router. That can't be right.How do I fix this so the system comes out of standby in the 'secured side' of the router?
View 9 Replies
View Related
Jun 23, 2012
I have some issue with internet connection and Router WRT54G. There is always "Local Connection" but no internet access. I checked that at two different laptops. One with Windows Vista and the other one with Windows XP. Both the same problem. There is a wireless connection with excellent signal strength but no internet access. I added a screen shut to see the Router setting. If more needed I will add more.
View 6 Replies
View Related
May 5, 2012
I have a E1500 hooked to a Galaxy Broadband/Hughes Satellite internet system. From the router I have gone to a EZXS55W ver. 4 switch. Off of the switch I have 2 computers and a PoS machine. The satellite system gives us a dynamic IP. I am noticing that my connection from computer to computer and also from them and the POS machine to the internet is constantly switching on and off, it seems. Any ideas what could be causing this issue?? We just recently went from a Static IP to the Dynamic IP. We did not have this issue with the Static IP and wondering if there are some settings I have neglected.
View 1 Replies
View Related
May 28, 2012
I am not getting anywhere near the same download speeds to my wireless laptop as my wired desktop? When I run the Xfinity speed test on my wired desktop I get anywhere from 18MB to 40MB downloads.But the same Xfinity speed test to my Wireless connection to my Dell laptop [G adapter] never gets above 15MB.Is there a checklist anywhere I can use to maximize my wireless speed to a [G adapter] wireless device?
View 9 Replies
View Related
Feb 26, 2013
my router stop getting internet connection its plugged in but keeps telling me no reset modem or unplug router
View 4 Replies
View Related
Feb 7, 2013
I bought this new router, and at first it seemed like it was working okay, but then i started noticing that my roku box (watch netflix) was cutting out all the time, losing the connection from the new router. I also began to notice that if more than one person was online, pages took forever to load, can't watch youtube videos and even listening to music online like Pandora became difficult. Also it says that I can get up to 300 mbps but when i run the test I get .50 download and about 1.8 upload Details About Router & Connection,Its a Linksys E1500 with the capability of up to 6 devices and my IPS is Comcast.
View 1 Replies
View Related
Jan 9, 2013
I want access to my e1500 with using a password
View 1 Replies
View Related
Feb 10, 2013
I'm using a Linksys E1500 on my Timewarner 20Mbs connection and I've noticed that anytime another computer on my network connects my connection speed take a significant drop. This happens when Macs or PCs connect and there doesn't seem to be any common ground between any of them. In addition the connection is slow wether the other PCs are idle or downloading anything, it seems to make no difference. my ping in any game drops from 70 to 500 just for 2 other PC being on at the saem time on the network.
View 2 Replies
View Related
Aug 26, 2012
My firewall outpost detected incoming connections on port 80 and blocked them.I think that the router must block incoming connections on port 80, right? But it does not.
[URL]
View 5 Replies
View Related
Sep 29, 2011
I set up the e1500 and everything worked well, my download speed over the wifi was something like 50mps, now its down to .3 mps over the wifi. When I'm hardwired to the router the speed goes back up and everything is fine. The only problem is the wifi. Its not the ISP because my roommates aren't having a problem with their wifi at all. I haven't changed anything on my computer except updated some drivers since I set up the router. My network card drivers are up to date and so is the router's drivers. I'm also doing all this about 5 feet away from the router.
I have a Dell XPS L502x running win 7 64 bit.
View 9 Replies
View Related
Apr 20, 2013
Updated firmware was installed and settings were reviewed. Intermittently the E1500 looses its ability to connect only to our Android devices and "Cisco Connect" displays that it has lost Internet connectivity. The PC hard-wired to the E1500 and another PC connected wirelessly both work fine when this happens, despite the Cisco Connect message. The Android devices show the presence of the network, but they never "connect" - find the IP address. The problem can only be resolved by re-booting (powering off/on) the E1500. The loss of connectivity to our two Android devices and the Cisco Connect error display always are concurrent. E1500 looses connection to Android devices
View 9 Replies
View Related
Dec 28, 2011
I have also tried all these options. Selected run as administrater when resetting they were all successful but still get local only connection with wireless, hardwired, and usb to enet adapter.
View 1 Replies
View Related
May 8, 2011
I just bought a Linksys E1500 router and followed the CD instructions for setup. It is wired to my desktop and I am unable to access the internet. If I go direct to the modem and bypass the router the internet works fine
View 3 Replies
View Related
Oct 23, 2012
How do i setup my Linksys E1500 router as an access point? I have a main router upstairs but the signal is weak in the basement. How do i configure this router as an access point for internet?
View 2 Replies
View Related
Apr 24, 2012
I've been researching this for a day now and have just confused myself further. Long story short, I just picked up an EA4500 and there's still a dead area in the house. I already have one ethernet cable that's being used which runs from the one side of the house to the other. After researching this, I believe I can set up the E1500 as an Access Point to further the range of the wireless signal via the ethernet cable and 2 routers. I just have a few additional questions that the articles and walkthroughs I've read through didn't seem to address.
I set up the EA4500 and have 2 SSID's, one for 2.4Ghz and one for 5Ghz band. When I set the SSID on the E1500, should I use the 2.4Ghz SSID from the EA4500 or should I reset the EA4500 to factory defaults and only use the 1 SSID instead of splitting them? Or, should I use a totally different SSID altogether on the E1500?I think from what I read, you should use different channels for each router; does it matter which ones you use as there's not that much traffic in my area and do I need to change the channel on both bands of the EA4500? Or can these all be left to Auto?Can you still use the ethernet ports on the AP/E1500 or are they rendered useless if you set it up in this mode?
View 1 Replies
View Related
May 14, 2013
Region : UnitedKingdom
Model : TL-WR841N
Hardware Version : V8
Firmware Version : 3.13.27 Build 121101 Rel.38183n
ISP : Virgin Media
I have recently purchased and installed a TL-WR841N wireless router to replace an older system. After following all of the quick install guide and the like I got it set up and working correctly both wired and wireless. However one laptop in the household, an Acer Aspire 5315 running Windows Vista 32bit, does not connect. Using an ethernet cable works fine but the wireless signal is seen and appears to connect but does not find the internet and states Local Only Access.When connected wirelessly I also cannot ping the device but when connected with a cable I can and get a good return.The firmware is up to date on the router and the latop is full up to date with drivers and windows updates.
View 2 Replies
View Related
Feb 17, 2013
I've been having a strange intermitent problem with my E1500 wireless router. When we first bought and installed it everything was working well with no known problems. After several months no one using the router was able to access certain websites as well as a game server that we play on. No one had made any changes to the router settings and I assumed at first that it was an ISP problem. After talking with our ISP tech support they finally suggested plugging my PC directly into the modem rather then the router. I did and found that the websites and servers that previously wouldn't connect while using the router were now reachable. Any changes to the router settings since installation.I decided that just in case someone unauthorized had made changes to simply revert the router to factory settings and reinstall the software. After doing this I found that I could again reach the websites and servers that I previously could not. So time went on with no problems until a few months later when the same websites and servers were again unreachable by anyone on our router. I again reset the router to factory settings and changed passwords as a precaution, but this time the websites and servers were unreachable even though I had just reset the router.
View 7 Replies
View Related
Apr 28, 2012
I have a ADSL Modem with built in router that the E1500 is connected to via Ethernet.If I choose "Automatic Configuration" for the internet connection setting on the E1500 I can enable DHCP on the E1500 but the gateway it gives to clients is always that of itself (192.168.1.1). The gateway it should be is that of the ADSL Modem (192.168. 1. 254).If I choose "Bridge Mode" I can't even enable DHCP.Is there a way I can use the DHCP server?
View 1 Replies
View Related
Sep 16, 2012
I have gone into the router itself at 192.168.1.1, changed settings, reset settings, upgraded firmware to 1.0.04, and / or whatever else was posted by other users. I have also changed my settings for my lappy's networking adapter, re-edited my IP, removed / reinstalled network adapter, and / or whatever else I found to try to do. I am frustrated and upset that a wireless problem is giving me so much headache.I am running Vista 32 Home Premium, HP Pavillion dv6700 Notebook, with a Cisco Linksys E2000 Wireless N Router. I have connected a desktop via wireless USB adapter, my android phone, my GF's android phone, her kids iTouch and phones, and when I try to connect via wirelessly to the router, I get local access only with an unidentifiable network, which then limits my access online, (I cannot connect to the internet). It will let me get online via ethernet cable, but not wirelessly. I have bypassed the router and connected directly to the modem without any problems. I have reset the modem and router many times, as well as rebooted my laptop a lot trying to gain some connection. My laptop can connect to other wireless hotspots / access points without any problems.
View 1 Replies
View Related
Jun 20, 2011
Cannot turn off my windows firewalls on my vista toshiba after removing a scam Vista antivirus spyware download.. Cannot access any ports,Whenever I try to open a web browser, my disk defragmentation, ccleaner
View 1 Replies
View Related
Sep 18, 2011
I can only get local access when using wireless connection on 2pcs running vista home premium.Internet works fine using etheral cable and fine on windows 7 laptops.
View 1 Replies
View Related
Dec 31, 2012
I am running on Windows Vista and out of no where I cannot connect to my network %70 of the time. When I can connect I have local access and a full bar signal but no Internet access. But when I have internet access every page takes forever to load (if it even loads). I tried reinstalling my drivers and even hanged some registry stuff. My wireless card 8.11g by Broadcom.
View 3 Replies
View Related
Apr 14, 2013
Installed new N600 router and every box in the house can access the internet - except for my Vista powered laptop. My network shows up as Unidentified network with 'locla only' access. Ben scouring message boards all day. Can't find a solution at Microsoft.
View 3 Replies
View Related
Mar 6, 2011
Is it normal to have packet losses of between 2 and 6% when using wireless. Laptop is running Vista Home premium. Internet is DSL light Router is Netgear WNR834B. Signal strength is good
View 1 Replies
View Related
Jan 4, 2011
MY laptop has a X in local area connection
View 2 Replies
View Related
Sep 1, 2011
just got a new router/modem and found the network but can only get local connection no internet. Im running vista?
View 2 Replies
View Related
Jun 29, 2012
I just got a new HP EliteBook 8560w(Win7) but when I connect an Ethernet cable, the wireless becomes disabled. With my older Dell machines(WinXP) I could use both [DHCP for wireless and 192.168.1.x on the copper/Ethernet].Is there a way to prevent the wireless from being disabled?
View 2 Replies
View Related
