Install Linksys Wrt110 Without Cd?
Oct 18, 2011how can i install my router linksys wrt110 no cd?
View 1 Replieshow can i install my router linksys wrt110 no cd?
View 1 RepliesMy internet connection drops intermittent along with everything else that is setup with the router. The router is linksys wrt110 and the cable modem is linksys befcmu10. Both of them probably needs updating but, can't seem to update and I can't access the web based server at 192.168.1.1
View 3 Replies View RelatedHow do I change my password / encription key on a linksys WRT110
View 1 Replies View RelatedI bought this router last year (out of warranty) and it has worked great... until 3 days ago. I came home and noticed my laptop (Dell Inspiron 1525) only had "local access only" in the network center. "Local only" both in a wired and wireless connection. I then unplugged my modem, my router, and restarted my computer. I turned everything back on and still nothing. I also checked for wires and the other simple stuff like that. The internet connection works normally when I plug Ethernet cable directly into my computer and bypass the router .My iPhone will connect to the router as well... just with no internet connection?
View 10 Replies View RelatedThe unit seems to be Ok, but it's not. Power light is solid blue, Internet light is flashing blue when connected to cable modem, when wireless is on wireless light flashes blue, when ethernet cable is connected the correct 1-4 blue light flashes.The unit issues IP addresses wirelessly with or without security, and on ethernet, but with no Internet access.I can log on to the router and have upgraded firmware to 1.0.07. Tried reset button a number of times, makes no difference.When logged in to the router and looking at the Status screen, it shows no IP address, no Subnet Mask, no Default Gateway, no DNS, thus I can't get on the Internet. Connection type is Auto Config - DCHP. It does show the correct domain name as other wireless routers show.
View 3 Replies View RelatedTried everything I could find on the boards (hard reset for 30 seconds, cycling power). The power light's the only one that's coming on and I can't tell if it's on continuously or just blinking really fast.
No problem with direct connection to the modem via ethernet, but I can't see the WRT110 via ethernet or wireless. It just suddenly stopped working yesterday.
I am trying to update my WRT110 which has 1.0.04 firmware on it right now but when i try to update it toVer.1.0.05 all i get is this message.... i dont know what to do i never had a problem updating my older router's befor i had this one this is the first time im updating this one i tryed updating it on IE 8 RC1 & also Safari 4 but i get the same message . I've also tryed saving the firmware file in it's own folder still no luck try updating on my xp desktop & my laptop with vista with same message? is it a problem with linksys with the file on there website maybe?
View 9 Replies View RelatedThe WRT110 is hooked up to Cable through Comcast and works fine with LAN connections. The problem comes in with more than one wireless laptop tries to connect. First, it was loaded with 1.0.4 firmware and my girlfriend's XP laptop would connect but drop the connection a lot. My Windows 7 laptop wouldn't connect at all. After trying everything someone recommended upgrading the firmware to 1.0.7. Well, now my Windows 7 laptop connects but the XP laptop will not. The DHCP won't assign it an IP, although it says it's connected.
View 2 Replies View RelatedI see that many people have the same problem, random disconnects. I am a long term sufferer from this. I have called support before they can't fix it. and being knowledgeable with routers has not worked at all. I turned off every wireless device in the house, even the microwave it still happens. I change the channel countless times it still happens.
View 3 Replies View RelatedI have a WRT110 wireless router which disconnects suddenly and continuously. In addition, its performance is really poor. The current firmware installed is 1.0.03. I found a new firmware for this model (1.0.04.10) but when I try to install it, I choose the .bin file downloaded from Linksys TechSupp website, click on the "Start Upgrade" button, but I always get the following message "Please designate the path to the firmware".
View 9 Replies View RelatedI have a WRT110 wireless router. My problem is that my laptop has issues connecting to my router. It sees it and shows that there is a strong signal but sometime it will connect other times not. My laptop has no problem connecting to other wirelss routers. And my other devices have no problem connecting to our router. I've reset the router several times and changed the router to no password or security of any sorts. How can I get my Laptop to connect to my router?? I feel like it is a setting issue between the Router and the laptop. Is there a way I can erase the history of the router from the laptop and start fresh?? Like I've said I have reset the router several times. Does it have to do with my firewall?? It's just frustrating that my laptop can connect to anything but this Router. And my other devices like our blue-ray and Wii can connect to the router without problems so why can't my laptop and router connect to each other?
View 7 Replies View RelatedI have a WRT110 router connected to my desktop computer. The router works great for the desktop and one laptop, but if I try to connect a second laptop it disconnects the first one.
View 2 Replies View RelatedWhen I type the routers IP address in teh browser window, nothing happens so I cannot access the router setup. I have a WRT110. What am I missing. I was able to do that when I first setup the router.
View 1 Replies View RelatedI have a WRT110 router (firmware v. 1.0.04) and a PC and an XBox 360 connected to it (both via cable). Every 15-20 minutes the connection is dropped for appr. 1-2 minutes. I tried modifying several router settings, but the connections are still being dropped
View 9 Replies View RelatedI have a WRT110 that let's a wired connection through to the internet but none of the wireless connections. I'm connect to a new Motorola DSL modem provided by AT&T. (Lightening killed the last one) My wireless stuff can talk to each other but can't access the internet.
View 2 Replies View RelatedI'm trying to upload some images for my job but everytime I hit the up load link to get the image loader I get a redirect to [URL]
What does this mean? I know its a router thing because I tried getting the image loader by using the computer directly from the modem and I didn't run into the issue. Do I have to open a port or something cause all I know is the router is on security lock down.
i have problem with wi-fi network and WRT 110. Seems to me that router only accepts 1 device. I used to have only 1 device (laptop) using wi-fi and desktop connected with ethernet as a second device. It worked just fine. Recently I added 2 wireless devices : apple tv and ipad 2. I can access wireless network only with one of them being “on” at the time (e.g. apple tv works when ipad and laptop don't use wi-fi. As soon as I connect another device router stops working (i'm loosing connection for wi-fi and ethernet) and I don't have internet access until I reboot router. (it happened only once for short period of time – about 40 min.- that I was able to connect to wi-fi with 2 devices. After that it never happened again). I'm not sure if I need newer router or I can still make it work with wrt 110.
View 4 Replies View RelatedMac airport shows full bars in network connnection and green connected dot, but no access to internet. Ethernet connection works fine. I also couldnt connect with my Iphone.
I have Charter cable with Motorolla SB6121 modem. I've reset the modem, rebooted everything, cloned my ip address, all several times .......but still no go.
Linksys says they don't support this router anymore accept for a pay for support service, which I would like to avoid.
I have a Linksys wrt110, and we didnt have a password on it for a while, i went and changed it so we had a password,now i have put a password on it, and now it wont let me connect any device to the internet, checked iphone and mac, nothing will work.
View 2 Replies View RelatedI have a Linksys WRT110 wireless router for my desktop via a D-link DWA-125 wireless adapter. The OS is Windows 7 64 bit and I mainly go online to play games. This has been a while and every time I play games, which requires stable connection, I will get this lag (the ping goes as high as 600ms for every few seconds then goes back to normal).I tried many ways to troubleshoot and find no solutions. I updated firmware for USB adapter, power cycling the router and reset the router many times.
View 3 Replies View RelatedMy brother has an HP G60 from 2009 with windows 7 home premium and 64 bit operating system. Whenever he turns it on and connects it to the internet, the whole network crashes. My xbox, ipod, laptop, and the main desktop (Which we also just changed to a Dell one.)downstairs all cannot connect to the internet. This lasts from anywhere between 2 and 15 minutes and it continues to crash the internet in about 15 minute intervals as long as his computer is connected to the internet. No other devices in the house cause this as I can have all of my stuff connected and nothing happens. We have a Linksys WRT110 router but I don't think that or the modem is the problem as we have changed both multiple times. This has been happening for about a year ever since my oldest brother gave my brother the laptop.
View 10 Replies View RelatedI have a hardwired HP computer with no problem connecting. The remainder of my wireless devices will not access internet. No problem until about 3 weeks ago then all of a sudden it stopped. All wireless devices detect the router/network, but will not allow access to the internet.
View 1 Replies View RelatedSet up: Router: WRT110 1 computer connected via ethernet cable 1 computer using a wireless nic card from cisco
The problem is thus: if the first computer is actively using the internet (even activities as mundane as browsing one's email) the computer connected wirelessly will lose its connection to the internet yet maintain its connection to the router. Both can be actively using the internet, but the wireless will seemingly at random drop internet access (usually in 30-120 minute intervals).
The computer connected via the ethernet cable was unplugged for a week and during that time the wirelessly connected computer was used extensively and did not lose connection once.
I don't understand how to even frame this problem in a concise manner, much less seek information as to how to resolve it. It's seemingly giving all priority to the computer connected via ethernet but I that's just intution speaking.
Setting date and time on WRT110
View 9 Replies View Relatedwe upgraded our router from WRT54G V5.0 to WRT110. before we dont have any issues using the ACCESS RESTRICTION from WRT54G but now on WRT110 we encounter a GLOBAL BUG. we are blocking the website like Youtube, Friendster, Facebook etc. on the EDIT LIST TAB we specify 4 IP Address that will not going to access the said websites. The problem is...all Computers (about 15 PC) that are using the Internet cannot access the said website also but we did not enter the other IP's.
View 9 Replies View RelatedA couple days ago I noticed that my wireless internet connection on my iPhone would cut in and out, then stopped all together. I also had no connection on my mac which is wired to the WRT110. I bypassed the WRT110 and then I had a connection on my Mac meaning the WRT110 is the problem. I haven't changed or added anything lately that could've caused this....
View 9 Replies View RelatedWas online the other night when my network suddenly dropped out on me. I assumed it was the router, not my computer, so I restarted it and got nothing. Same with my modem. Then I completely reset the router and, obviously, lost the network I had set up. Didn't realize until today, when I downloaded the setup instructions and reinstalled the router with a new network that the problem might actually be with my computer. I can use the ethernet port to access the web both with the direct line from the modem and when using a line through my router, I just can't get my computer to work on the network I set up. I know the network is valid because it works with my smart phone and a couple of other devices. On my Mac, it shows up in the list of available networks and has full signal strength. Diagnostics in network preferences gives me the following message: "AirPort has a self-assigned IP address and may not be able to connect to the Internet."
View 2 Replies View RelatedUsing WRT110 router, running XP, SP3 on both laptops, one a Dell and one an old Toshiba. Never any problem with the Dell (and Gateway before that), nor the iPad, Acer notebook, etc. However, the Toshiba keeps losing the connection to Internet (even though the icon says the connection is excellent). DH has to continually Repair in order to connect. I even reformatted the Toshiba, thinking it was something in the Registry. Now that it is back up and running (and all programs updated), it STILL periodically has to be repaired in order to connect.
View 9 Replies View RelatedSet up:Router: WRT11.1 computer connected via ethernet cable.1 computer using a wireless nic card from cisco.The problem is thus: if the first computer is actively using the internet (even activities as mundane as browsing one's email) the computer connected wirelessly will lose its connection to the internet yet maintain its connection to the router. Both can be actively using the internet, but the wireless will seemingly at random drop internet access (usually in 30-120 minute intervals).The computer connected via the ethernet cable was unplugged for a week and during that time the wirelessly connected computer was used extensively and did not lose connection once.
View 2 Replies View RelatedI have a WRT110 and in the access restriction settings section the time is in military. I try to set the restriction from 11:30 pm to 6:00 am. I cannot because it tells me the second time "6:00 am" has to be larger than the first. I don't understand a way around this.
View 2 Replies View RelatedI have a Linksys WRT110 wireless router that has never given me any problem. All of the sudden, after a storm blew through yesterday, none of the laptops in my house (PC running Vista and Mac) will recognize my wireless network. I have a desktop computer and BluRay player hardwired to the router and the internet works fine on them through the router.The problem is not that I can't connect or lose connection, the wireless network isn't showing up as existing anymore, like it has disappeared.
View 3 Replies View RelatedMy wrt110 firmware .05 has been working fine until now. I have a couple of phones, 2 printers, 3 laptops and a wii happily connecting to it. However now when I power on the wireless device, nothing can connect wirelessly. Wired connection is fine, but my wireless network disappears. No device can find the network, although it is there and set up on the admin pages. I pull the power chord out for 30 seconds and try again to get it going again, a bit like trying to start a car. Everntually devices find the network.
On two occasions it has forgotten the wireless settings and restored an open 'linksys' network. It's really infuriating becuase whilst I restore the SSID and use the same key, not all the devices actually recognise it and have to be reconfigured on the devices.
can't find my internet connection anymore. I have the wrt110. when I click the little computer in the corner on my computer to see where I'm connected my connection isn't there and I have to log onto someone elses unsecured network
View 9 Replies View Related