Install Driver For 6100 Westell WireSpeed Dual Connect Modem?

May 12, 2011

I'm running into the same problem. I'm trying to connect my 6100 Westell Modem as well, but I'm going through Cincinnati Bell Zoomtown. They sent me a disk & it does't have the right software on it. I was told to look online & have had no luck finding where to download. I have to use USB to connect. I'm at a loss at what to do. Have spent almost 3 hours on the phone with tech support at this point!

View 1 Replies


ADVERTISEMENT

AT&T Westell 6100 Modem Changing IPs Over And Over?

Mar 28, 2012

At my home I have a Westell 6100 DSL modem connected to a computer.AT&T is the ISP and all filters are installed.I use my home computer via VNC applications from a remote location and I began to notice that the VNC local client session was being lost,,,over and over.It was discovered that the WAN IP was changing over and over and happens about once every 5-10 minutes,,,or so. While I have a dynamic WAN IP from ATT, I would not expect the WAN IP to change as often as 7-8 (or more) times a day. At first I thought it was ATT changing my DYNAMIC WAN IP.But, a review of the Westell log file is reporting lost connection(s),,,,,etc, etc,,,,,etc. over and over.Below is a list of the Westell log information showing several hours of behavior.The Westell diagnotics that were run and the SELF test run as expected.Looks like the DSL modem is going bad, a filter is bad, or the line is going bad and needs to be balanced,,,,etc..

Code:
All Entries
CURRENT MODEM STATUS
DSL Modem Status....... Up
PPP Session Status...... Up
Connection Type......... PPPoE
Time set from............. Local

[code]....

View 2 Replies View Related

Security Key For Westell 6100 Modem?

Aug 1, 2011

Where do I find security key for modem Westell 6100?

View 3 Replies View Related

Westell 6100 - Modem Connects To Internet But Router Does Not?

Apr 20, 2011

I'm unable to access the internet when I plug my modem (Westell 6100) into my router (Netgear WPN824). It works perfectly fine when I connect my modem directly to my computer though. It was working perfectly last night and for the last few years up until now.

I've tried sequencing, turning off my modem/router/pc while waiting two minutes in between each step but it doesn't work. I'm 100% sure the log in and password information to log in is correct (I use PPPoE to access the internet). I've tried resetting the router to factory settings and going through the setup but I get the same result. (Unable to connect)


OS: Windows XP
ISP: Verizon DSL/PPPoE
Modem model: Westell 6100
Router: Netgear WPN824

View 7 Replies View Related

Linksys Router With Verizon Westell 6100 Modem?

Oct 18, 2011

Okay, I know there has to be something I'm doing wrong because 3 months ago I set up the same modem & router to work. Being the idiot I am, I reset my router to change the password (dumb I know) and now the router can't pass the internet signal from the modem on! 1. I've set the modem to bride/bridge and unchecked the private LAN box.release/renewed IP2. Used the modem's MAC address in the router. . Made sure DHCP set to obtain automatically.4. Reset, restarted seperately multiple times.It looks like from the status page that the router is obtaining an IP but it won't connect to the internet

View 2 Replies View Related

Westell 6100 - Adding A PC To Mac DSL Connection Via Modem / Router

Nov 11, 2012

I have DSL via ethernet on my Mac through a Westell 6100 series modem/router, which also has a USB port. Is it possible to share my Internet connection, preferably via a cable not wireless, with a PC laptop by using the USB port (with an ethernet adaptor), or by splitting my present ethernet connection?

View 6 Replies View Related

Adding PC To Mac DSL Connection Via Westell 6100 Series Modem / Router?

Mar 15, 2013

I have DSL via ethernet on my Mac through a Westell 6100 series modem/router, which also has a USB port. Is it possible to share my Internet connection, preferably via a cable not wireless, with a PC laptop by using the USB port (with an ethernet adaptor), or by splitting my present ethernet connection?

View 1 Replies View Related

Westell Modem 6100 Server Requires Username And Password

Oct 29, 2011

I just bought a Westell modem 6100 model online, and when I try to change the profile, I get a message saying: The server 192.168.1.1:80 requires a username and password. The server says: Modem Secure."

View 1 Replies View Related

Router DI514 / Modem Westell 6100 - Wireless Connection Not Working

Nov 12, 2011

Wireless Router - DI-514,Modem - Westell 6100, Every time I refresh the 'View available Network settings' My Connection name pops up with other connections but then disappears after I refresh again and others as well disappear, but some stay. Right now I'm using the the wire the blue wire that connects me to the internet.

View 3 Replies View Related

Lost Internet Connection When Setting Westell 6100 Modem To Simply Bridge To Router?

Aug 1, 2011

Earlier today I attempted to change the setting on my Westell 6100 modem such that it would simply bridge the connection to my Linksys WRT54GS router, basically involving setting the router to bridge only and turning DHCP off. Now I no longer get an internet connection through my router when previously the connection had worked perfectly fine before. I following the steps of cloning the MAC address to the router and have done the proper resetting steps (computer, them router, then modem) but I simply can't get an internet connection through my router. The process to set up simple bridging from the modem what supposed to end up with the internet light no longer turning on but the light turned back on following one of the resets.

Currently, I can connect to the internet through the modem just fine but I get nothing when I include the router. I'm not sure if there are some other settings I'm supposed to be changing as I can't seem to find anything past what I've already done when researching online. At this point I would just be happy reverting the settings I've changed but I don't know how to access the modem now that DHCP is off.Basically, I'd prefer to be able to get the router working with these new settings but if that proves too difficult (as I've heard it can be when trying to get Westell modems to work with Linksys routers) I'd like to learn how to access the modem and change the settings back to what they were (preferably in as simple terms as possible as I don't particularly understand what a lot of these settings/configurations do).(And a bit of an aside, but I had attempted to do this modem bridging to "fix" perceived internet speed problems. I've been averaging around 300Kbps download rates ever since I've had this internet connection from Verizon when the supposed download rates should be between 1MB and 1.3MB. Doing this modem bridging had been reported to fix some modem/router conflicts and improved connection speeds for some.)

View 5 Replies View Related

Westell Wirespeed Installation Software Download

Apr 30, 2012

I need a program (not the driver) to access a Westell WireSpeed B90-210015-4 (Rev. F), DSL modem, manufactured 07/2004. Got it through Verizon when they provided our internet service, now provided by Frontier (Verizon sold out to Frontier). Frontier knows nothing about this modem and doesn't support it. Netgear bought out Westell, but neither Westell nor Netgear support it. What I would like to have is the software provided on the CD that was provided originally by Verizon !

View 6 Replies View Related

Westell 6100-linksys Wrt54g Dd-wrt Configuration

Mar 23, 2012

i recently reflashed a linksys wrt54g v2.0 with dd-wrt (the latest stable release. i cannot for the life of me seem to configure it so that it works properly with my westell 6100 verizon modem. i would like to do so without placing the modem in bridge mode, as i had it set up prior to the reflash. this way i can remove the router when not in use.

my router settings:
wan connection type:auto config-dhcp
stp:disable
routername:DD-WRT[code].....

View 13 Replies View Related

What Options To Connect Westell Modem To A Router (linksys)

Mar 3, 2011

I was trying to work with a friend set up his wireless router. He had the Geeksquad come and set it up and I have no idea what they did. A mess of wires. I noticed that I was able to log into the imbeded browser of the modem and the router from the main PC. I didn't think it was possible to log into the modem if it was set up in bridged ethernet mode. His internet is working but I was thinking that he may have problems with double NATing.Basically, I just want to know what options there are for setting up a router to a modem. I'm aware of bridged mode and setting up the router as a switch (not real knowledgable of this one). Seems like DHCP is enabled on both devices.

View 3 Replies View Related

Westell 7500 - Can Dsl Router Connect To A Broadband Modem

Sep 11, 2011

can a westell 7500 router/modem dsl from verizon connect to optimum broadband cable?

View 1 Replies View Related

Westell 2110 Wired DSL Modem - Unable To Connect To The Internet?

Jan 7, 2012

I have a Westell 2110 wired DSL modem for Frontier (formerly Verizon). It's not a modem that has a web interface, so I can't log into it to change any settings. It also, to my knowledge, has no bridge mode (which is a term I know very little about). I had an old D-Link WBR2310 router, and since I knew the wireless and the phones ran on the same frequency, I bought a new Linksys e1200 router. Unfortunately, when I went through the setup of the router, while I know I have a solid internet connection from the modem (I'm hard wired in as I type), and while I can connect to the router, I am unable to connect to the internet. I took down my IP address, DNS servers, subnet mask, and default gateway, and set up the router to run under a Static IP, which it does phenomenally. Unfortunately, when the ISP (via direct line or my modem) changes the IP address after a few hours, my connection drops and I have to go reset up the connection via a hard wire, taking down the information, etc. Why is this the only way I can set up my connection? What could I be doing that I'm not to get it running DHCP correctly? It worked on my WBR 2310.  

View 2 Replies View Related

Using A Westell Modem On ATT

Apr 7, 2011

I have a Westell Verizon 6100G Modem someone gave me. My service is with ATT using a Westell Windspeed modem, that is going bad. ATT wants $75.00 to send me a new modem. Is there any way to convert this Verizon modem to use it on ATT?

View 3 Replies View Related

Westell A90-750044-07 (Frontier) Use As Only A Modem?

Jun 25, 2012

I have a Westel 750044, and I would like to use it only as a modem, and use my WRTG54S as my router. Do I need to just change this line [URL] to "Bridge", plug in my router to the modem, and configure the router? My Current VC Setup:[URL]Mostly I want to do this to enable DMZ mode, and also because the whole Verizon/Frontier difference on this modem/router combo is killing me?

View 1 Replies View Related

Wireless :: How To Use Windows Me With A Westell Modem-router

Mar 10, 2012

I have a network with xp and vista and want to add my computer with windows me. The network worked well with my linskys router but the modem went out and- frontier net came and put in a westell 7500 which is a router modem not supporting windows me

View 2 Replies View Related

Could Westell A90-750015-07 Modem / Router Be Used As Wireless

Nov 17, 2012

I found my old Westell modem/router that was through Verizon DSL, but I don't have Verizon anymore, and I have Service Electric. I had asked my questions over at DSLReports, and they said Westell could be used as a Ethernet router, but they still doesn't fully answer my questions.The Westell modem/router model is A90-750015-07. I only have a modem through Service Electric. My questions are could this Westell modem/router be used as a separate wireless only router? Like, the D-link, and Linksys sells wireless routers, right? People could connect to it, or people could enable WPA for more secured? Could this modem/router act as wireless without the need of a DSL link through Verizon? I know on some wireless routers others are able to connect the modem to router using a WAN port, and then router to PC using a LAN port. However, I did not see any ports on this Westell for LAN and WAN. I'll show what I see from left to right.

View 1 Replies View Related

Using Westell 7500 Dsl Modem / Router As Stand Alone?

Feb 11, 2012

I have a cable modem but need to hook up 2-3 computers. I cant get internet through my d link router, but can still use it for home networking. I tried getiing into the d link with 192.168.2.1 but failed...resetting does nothing. I also have a westell 7500 dsl modem/router but it also fails to supply any comp with internet, although only my xp comp can access it. I can not get into the routers. Resetting does nothing.

View 11 Replies View Related

Bridge Dlink DIR-628 To Westell 7500 Modem?

Feb 12, 2012

I have a Westell 7500 wireless modem that I would like to bridge to my Dlink DIR-628.

View 1 Replies View Related

Att Westell Modem Won't Work With Linksys WRT54G

Jun 9, 2011

When I hook up the Westell modem to my Linksys router WRT54G it wont work?

View 1 Replies View Related

Possible To Use Westell Ultraline Series3 Verizon Modem With Charter?

Oct 12, 2012

I have a Westell Ultraline Series3 Verizon modem/ router. I no longer have Verizon, I now have Charter cable internet. Is it possible to use this modem with Charter? I have tried everything I know (which is not much). When connected to the Charter cable the light on the front indicates internet, but when I try to connect to the internet I don't have internet access. This happens when connected via wire or wireless.

View 1 Replies View Related

Wireless Modem Westell 7500-Power Shuts Off

Mar 1, 2013

I have DSL service through Verizon, using the wireless modem Westell 7500. At least 1-2 days a week the power light goes out on the modem. I typically reboot the modem and it takes 1-2 minutes to restart but sometimes I have to reboot a second time in order to get the power light to go on.

View 2 Replies View Related

Accessing Settings Of Westell 7500 Modem / Router

Jan 6, 2012

I am very new to port forwarding and firewall issues. I have been told that the software issue that I have probably is a router/modem issue as every other possibility has been ruled out. I have a Westell 7500 modem. How do I access, set or change settings on it? And, which is the better modem, a Westell 7500 or a Westell 327W??

View 1 Replies View Related

Westell Modem Port Forwarding On Linksys Router

Nov 30, 2011

I have at&t DSL with Westell Modem/Router in Bridge Mode and Linksys Router connected. The internet is working fine, but I'm unable to forward ports on the Linksys Router. The ports are 80 and 37777.

View 1 Replies View Related

How To Change IP Address Of Westell 7500 Frontier Modem

Apr 9, 2012

How to change ip address on frontier mod.7500 so i can run them together

View 1 Replies View Related

Wireless :: Can't Add Two DLink Routers To Westell 7500 Modem / Router?

Jun 18, 2011

We are using a Westell 7500 wireless modem/router from Frontier without any problemsI have two d-link wireless n300 routers that I want to add to network so I can add them to our DirecTV DVR's. I have tried using the D-link CD and instructions without any success. Everytime it prompts me for my 1st router's (the Westell's) login/password, it says it's invalid. If I then click to continue w/o the logon and password, it then gives me an error when it is trying to add the d-link. I have tried everything. My Westell IP is 192.168.1.1. How can I access and add the d-link routers? Is there an easier way?

View 16 Replies View Related

No Internet Connection Windows XP And Westell 7500 Modem Router?

Oct 12, 2011

I recently needed a new router from my internet provider. They came to my home and set up Westell 7500 modem router. My home computer brings up internet with no problems or delays. Unfortunately, my wireless laptop won't recognize any network.I plugged it in using the ethernet cord directly to laptop and modem and still no internet. I'm frustrated, I use my laptop all the time and without the internet it's worthless.

View 1 Replies View Related

Configure Westell 6200 DSL Modem To Accept Access Via Remote PC?

Aug 28, 2012

Is it possible to configure a Westell 6200 DSL modem to accept access via a remote PC? I have a security camera that can be viewed via remote computer access, but I cannot configure my modem to accept a remote access.

View 3 Replies View Related

How To Install Driver Cd

Apr 14, 2012

How to install driver cd

View 1 Replies View Related

Westell 7500 DSL Modem / Router Only Works When Connected To Desktop Via Ethernet

Jun 10, 2012

So I have a Westell 7500 Modem/Router with Century Link DSL. I've been running a couple of laptops and my wifi enabled TV on the wireless. A few days ago I got a new desktop PC (Windows 7) and plugged the ethernet cable into it. Everything was great but the wireless was a bit slow for the TV so I plugged that in with an ethernet cable too. No problems for a few days. Today, we had a power blip and everything reset and I noticed that the internet light on the modem was solid red and I couldn't access the internet on any machine (ethernet or wifi). I called the ISP who said there was an outage in the area. A few hours later, solid green light on the modem BUT the TV (ethernet connected), my iphone, and my laptops could NOT connect, despite the network showing up with a full signal. Oddly, my new PC, connected via ethernet was fine so I played some Diablo (side note). Here's the deal: the new PC connects just fine but nothing else will. If I unplug the ethernet cable to the PC or disable the LAN connection, the red internet light appears on the modem. It seems as though the PC has hijacked the modem in some way. Even the TV won't connect with the ethernet cable. The only way the internet works now is if the modem is connected to the new PC. I've done all the resents - unplugged the modem and let it sit for 10-15 minutes, accessed the router settings, etc etc. Why would this start happening now after everything was working well for several days and how do I fix it? I need the wifi connection! Update: Plugged my Macbook Pro into the ethernet cable (took it out of new PC) and it works.

View 1 Replies View Related

Linksys Wireless Router :: E3200 - Westell 7500 Modem / PCs Not Getting Internet

Feb 7, 2012

I used these instructions to put my Fairpoint westell 7500 modem/router into bridge mode: [URL].  Then I hooked my new e3200 to the westell 7500, but no matter what I tried, I could not get any PCs hooked to the e3200 to be able to get to the internet.so able to get to internet too. My questions are:Is there any downside to doing it this way? (ie, not putting westell in bridge mode).Can this cause any slowness or conflicts? Any reasons why bridge mode may not have worked?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved