Possible To Use Westell Ultraline Series3 Verizon Modem With Charter?
Oct 12, 2012
I have a Westell Ultraline Series3 Verizon modem/ router. I no longer have Verizon, I now have Charter cable internet. Is it possible to use this modem with Charter? I have tried everything I know (which is not much). When connected to the Charter cable the light on the front indicates internet, but when I try to connect to the internet I don't have internet access. This happens when connected via wire or wireless.
View 1 Replies
ADVERTISEMENT
Oct 18, 2011
Okay, I know there has to be something I'm doing wrong because 3 months ago I set up the same modem & router to work. Being the idiot I am, I reset my router to change the password (dumb I know) and now the router can't pass the internet signal from the modem on! 1. I've set the modem to bride/bridge and unchecked the private LAN box.release/renewed IP2. Used the modem's MAC address in the router. . Made sure DHCP set to obtain automatically.4. Reset, restarted seperately multiple times.It looks like from the status page that the router is obtaining an IP but it won't connect to the internet
View 2 Replies
View Related
Feb 19, 2012
We got a 1921 router that works fine. We ordered Verizon Businss One Static IP ADSL. It came with a Westell Modem that we configured in bridge mode. When we do a test by assigning a static IP to our laptop then hook it up to the Westell it works fine. We can browse the web. Then when we assign a static IP to the Ethernet on our 1921 then connect it to the Westell it doesn't work. We can't ping out from the router to for example 4.2.2.2. From the router we can't even ping the default gateway (on Verizon's side).
View 2 Replies
View Related
Mar 18, 2012
We have an existing RVS4000 that has been coexisting peacefully with an ISP managed Netopia 2241N. That configuration has worked fine for over a year.The company is switching to using Verizon DSL instead. Verizon sent a Westell Model 7500 router. The router works fine with a standalone PC but, in none of the modes can I get internet connectivity through the Westell to the RVS4000. I can't ping the gateway or the DNS addresses and there is zero activity. I've tried the default "routed bridge" settings on the modem as well as the "bridge" settings. I can only get these working directly on a PC but as soon as I put the RVS4000 in between nothing seems to be getting through. I've tried turning off all Firewall features in both devices but hasn't worked.
There is a single, static IP. What specific modes and settings should be in the RVS4000 to communicate with the Westell Model 7500 in "bridge" mode?What adjustments should be made to the Westell to pass along the necessary ports that will be needed?Even though it is a business account, Verizon refuses any assistance beyond getting the unit functioning with a single computer and, if requested, setting their Westell to "bridge" mode.
View 5 Replies
View Related
Mar 24, 2011
I have a Toshiba laptop that has no trouble picking up the wireless when it gets the signal, but my modem keeps dropping connection and then lights go to flashing on the modem at the most random times. I sometimes have days where I can't use the internet at all because it won't connect. I had a friend look at it and they said it could be faulty wiring for my cables. Is that possible? And if so, what should I do? I am getting frustrated by not being able to use the internet. It never lets me connect when it's raining here and then if there is no trouble with the weather, it is the same exact way
View 7 Replies
View Related
Jan 4, 2012
I have charter cable coming tomorrow to install cable television and internet. I am using my own modem and router instead of renting one because they dont have any available to meet the install date?Should I just rent one from them and wait or should I just buy a different cable modem. I will be getting the Ultra cable package from charter that has speeds up to 100Mbps download and 5Mbps upload. I would say it is going to run around 60. I have a RCA DCM315 modem and a Linksys WRT54G v6 router with DD-WRT firmware. max up and down speed for the RCA DCM315 modem.
View 1 Replies
View Related
Nov 29, 2012
So about a month ago I made the switch from AT&T to Charter and had a ton of problems those first 2 days getting it running, then after that it was running just fine until today.Last night it randomly stopped working, but I didn't want to fix it at the time(to tired).
It seems like when the modem does a restart it won't work with my router unless I disconnect all the ethernet cords going out of the router except the one going to the modem. And once I verify a connection(router has a light) I can connect the other ethernet cords and everything will function just right.So I fixed it this morning and about 30 minutes later it stopped working again. I don't know what's causing it to stop working, it seems like the modem is resetting and then I have to do what I described above. And then after that it shortened to about 5 minutes later.
My router is the LevelOne WBR-6002.
The modem is a Cisco DPC3008.Here's the Cisco page:
Quote:
Model: Cisco DPC3008
Vendor: Cisco
Hardware Revision: 1.0
MAC Address: 7c:b2:1b:95:32:fe
Bootloader Revision: 2.3.1_R3[code]....
View 7 Replies
View Related
Feb 8, 2012
my dir-655 rev. A2 router won't connect to the new modem that Charter sent me. I had the scientific Atlanta model dpc2100r2 modem but Charter called and said that they have upgraded my speed for free from 18/2 to 30/4 and that I needed a new docsis 3.0 compatable modem in order to take full advantage of the speed upgrade. I received the modem and connected an activated it according to their instructions. The modem works fine when connected to the PC only but as soon as I connected to the dir 655 the link light went out on the modem and I lost my internet connection. The first step I took was to clone the mac address in Wan section of router. It still did not work. The next step was to turn the modem off, the router off and shutdown the PC. I waited until this morning to reconnect everything. I started the PC, then I started the modem and waited for it to stabilize and finally I restarted the router. I still had no connection. The status page of the router said that the cable was disconnected and that network was disconnected. There was no info to release so I clicked the renew button but nothing happened.
View 3 Replies
View Related
Apr 7, 2011
I have a Westell Verizon 6100G Modem someone gave me. My service is with ATT using a Westell Windspeed modem, that is going bad. ATT wants $75.00 to send me a new modem. Is there any way to convert this Verizon modem to use it on ATT?
View 3 Replies
View Related
Jun 25, 2012
I have a Westel 750044, and I would like to use it only as a modem, and use my WRTG54S as my router. Do I need to just change this line [URL] to "Bridge", plug in my router to the modem, and configure the router? My Current VC Setup:[URL]Mostly I want to do this to enable DMZ mode, and also because the whole Verizon/Frontier difference on this modem/router combo is killing me?
View 1 Replies
View Related
Mar 28, 2012
At my home I have a Westell 6100 DSL modem connected to a computer.AT&T is the ISP and all filters are installed.I use my home computer via VNC applications from a remote location and I began to notice that the VNC local client session was being lost,,,over and over.It was discovered that the WAN IP was changing over and over and happens about once every 5-10 minutes,,,or so. While I have a dynamic WAN IP from ATT, I would not expect the WAN IP to change as often as 7-8 (or more) times a day. At first I thought it was ATT changing my DYNAMIC WAN IP.But, a review of the Westell log file is reporting lost connection(s),,,,,etc, etc,,,,,etc. over and over.Below is a list of the Westell log information showing several hours of behavior.The Westell diagnotics that were run and the SELF test run as expected.Looks like the DSL modem is going bad, a filter is bad, or the line is going bad and needs to be balanced,,,,etc..
Code:
All Entries
CURRENT MODEM STATUS
DSL Modem Status....... Up
PPP Session Status...... Up
Connection Type......... PPPoE
Time set from............. Local
[code]....
View 2 Replies
View Related
Aug 1, 2011
Where do I find security key for modem Westell 6100?
View 3 Replies
View Related
Mar 10, 2012
I have a network with xp and vista and want to add my computer with windows me. The network worked well with my linskys router but the modem went out and- frontier net came and put in a westell 7500 which is a router modem not supporting windows me
View 2 Replies
View Related
Nov 17, 2012
I found my old Westell modem/router that was through Verizon DSL, but I don't have Verizon anymore, and I have Service Electric. I had asked my questions over at DSLReports, and they said Westell could be used as a Ethernet router, but they still doesn't fully answer my questions.The Westell modem/router model is A90-750015-07. I only have a modem through Service Electric. My questions are could this Westell modem/router be used as a separate wireless only router? Like, the D-link, and Linksys sells wireless routers, right? People could connect to it, or people could enable WPA for more secured? Could this modem/router act as wireless without the need of a DSL link through Verizon? I know on some wireless routers others are able to connect the modem to router using a WAN port, and then router to PC using a LAN port. However, I did not see any ports on this Westell for LAN and WAN. I'll show what I see from left to right.
View 1 Replies
View Related
Feb 11, 2012
I have a cable modem but need to hook up 2-3 computers. I cant get internet through my d link router, but can still use it for home networking. I tried getiing into the d link with 192.168.2.1 but failed...resetting does nothing. I also have a westell 7500 dsl modem/router but it also fails to supply any comp with internet, although only my xp comp can access it. I can not get into the routers. Resetting does nothing.
View 11 Replies
View Related
Feb 12, 2012
I have a Westell 7500 wireless modem that I would like to bridge to my Dlink DIR-628.
View 1 Replies
View Related
Jun 9, 2011
When I hook up the Westell modem to my Linksys router WRT54G it wont work?
View 1 Replies
View Related
Feb 13, 2012
For some reason, whenever I go home (I'm in college right now), my internet goes haywire. It'll connect for about an hour or so when I first load it up, but after that, it refuses to connect at all. If I restart my modem (verizon fios modem), then it'll connect for about 5 minutesIf I run the troubleshooter, sometimes it doesn't detect anything wrong with it, and other times, it says "the default gateway is not available"[CODE]
View 1 Replies
View Related
Mar 1, 2013
I have DSL service through Verizon, using the wireless modem Westell 7500. At least 1-2 days a week the power light goes out on the modem. I typically reboot the modem and it takes 1-2 minutes to restart but sometimes I have to reboot a second time in order to get the power light to go on.
View 2 Replies
View Related
Mar 3, 2011
I was trying to work with a friend set up his wireless router. He had the Geeksquad come and set it up and I have no idea what they did. A mess of wires. I noticed that I was able to log into the imbeded browser of the modem and the router from the main PC. I didn't think it was possible to log into the modem if it was set up in bridged ethernet mode. His internet is working but I was thinking that he may have problems with double NATing.Basically, I just want to know what options there are for setting up a router to a modem. I'm aware of bridged mode and setting up the router as a switch (not real knowledgable of this one). Seems like DHCP is enabled on both devices.
View 3 Replies
View Related
Apr 20, 2011
I'm unable to access the internet when I plug my modem (Westell 6100) into my router (Netgear WPN824). It works perfectly fine when I connect my modem directly to my computer though. It was working perfectly last night and for the last few years up until now.
I've tried sequencing, turning off my modem/router/pc while waiting two minutes in between each step but it doesn't work. I'm 100% sure the log in and password information to log in is correct (I use PPPoE to access the internet). I've tried resetting the router to factory settings and going through the setup but I get the same result. (Unable to connect)
OS: Windows XP
ISP: Verizon DSL/PPPoE
Modem model: Westell 6100
Router: Netgear WPN824
View 7 Replies
View Related
Sep 11, 2011
can a westell 7500 router/modem dsl from verizon connect to optimum broadband cable?
View 1 Replies
View Related
Jan 6, 2012
I am very new to port forwarding and firewall issues. I have been told that the software issue that I have probably is a router/modem issue as every other possibility has been ruled out. I have a Westell 7500 modem. How do I access, set or change settings on it? And, which is the better modem, a Westell 7500 or a Westell 327W??
View 1 Replies
View Related
Nov 11, 2012
I have DSL via ethernet on my Mac through a Westell 6100 series modem/router, which also has a USB port. Is it possible to share my Internet connection, preferably via a cable not wireless, with a PC laptop by using the USB port (with an ethernet adaptor), or by splitting my present ethernet connection?
View 6 Replies
View Related
Nov 30, 2011
I have at&t DSL with Westell Modem/Router in Bridge Mode and Linksys Router connected. The internet is working fine, but I'm unable to forward ports on the Linksys Router. The ports are 80 and 37777.
View 1 Replies
View Related
Apr 9, 2012
How to change ip address on frontier mod.7500 so i can run them together
View 1 Replies
View Related
Apr 14, 2012
How do I get my verizon usb mobile modem to work with my wireless router? My router is a Belkin N150.
View 1 Replies
View Related
Jun 25, 2011
I just bought a D-Link DIR-615 N300 wireless router to use for printing between my laptop and HP4500 wireless printer. During setup using Verizon Mobile USB 760 modem for internet connection---it's not working--? Or is the only way to utilize is to have a DSL or Cable modem?
View 1 Replies
View Related
Jun 18, 2011
We are using a Westell 7500 wireless modem/router from Frontier without any problemsI have two d-link wireless n300 routers that I want to add to network so I can add them to our DirecTV DVR's. I have tried using the D-link CD and instructions without any success. Everytime it prompts me for my 1st router's (the Westell's) login/password, it says it's invalid. If I then click to continue w/o the logon and password, it then gives me an error when it is trying to add the d-link. I have tried everything. My Westell IP is 192.168.1.1. How can I access and add the d-link routers? Is there an easier way?
View 16 Replies
View Related
Oct 12, 2011
I recently needed a new router from my internet provider. They came to my home and set up Westell 7500 modem router. My home computer brings up internet with no problems or delays. Unfortunately, my wireless laptop won't recognize any network.I plugged it in using the ethernet cord directly to laptop and modem and still no internet. I'm frustrated, I use my laptop all the time and without the internet it's worthless.
View 1 Replies
View Related
Aug 28, 2012
Is it possible to configure a Westell 6200 DSL modem to accept access via a remote PC? I have a security camera that can be viewed via remote computer access, but I cannot configure my modem to accept a remote access.
View 3 Replies
View Related
Mar 15, 2013
I have DSL via ethernet on my Mac through a Westell 6100 series modem/router, which also has a USB port. Is it possible to share my Internet connection, preferably via a cable not wireless, with a PC laptop by using the USB port (with an ethernet adaptor), or by splitting my present ethernet connection?
View 1 Replies
View Related
Jan 7, 2012
I have a Westell 2110 wired DSL modem for Frontier (formerly Verizon). It's not a modem that has a web interface, so I can't log into it to change any settings. It also, to my knowledge, has no bridge mode (which is a term I know very little about). I had an old D-Link WBR2310 router, and since I knew the wireless and the phones ran on the same frequency, I bought a new Linksys e1200 router. Unfortunately, when I went through the setup of the router, while I know I have a solid internet connection from the modem (I'm hard wired in as I type), and while I can connect to the router, I am unable to connect to the internet. I took down my IP address, DNS servers, subnet mask, and default gateway, and set up the router to run under a Static IP, which it does phenomenally. Unfortunately, when the ISP (via direct line or my modem) changes the IP address after a few hours, my connection drops and I have to go reset up the connection via a hard wire, taking down the information, etc. Why is this the only way I can set up my connection? What could I be doing that I'm not to get it running DHCP correctly? It worked on my WBR 2310.
View 2 Replies
View Related
