How To Change IP Address Of Westell 7500 Frontier Modem

Apr 9, 2012

How to change ip address on frontier mod.7500 so i can run them together

View 1 Replies


ADVERTISEMENT

Westell A90-750044-07 (Frontier) Use As Only A Modem?

Jun 25, 2012

I have a Westel 750044, and I would like to use it only as a modem, and use my WRTG54S as my router. Do I need to just change this line [URL] to "Bridge", plug in my router to the modem, and configure the router? My Current VC Setup:[URL]Mostly I want to do this to enable DMZ mode, and also because the whole Verizon/Frontier difference on this modem/router combo is killing me?

View 1 Replies View Related

Get Into Westell 7500 Menu To Change Ssid?

Jun 7, 2011

How do I get into the westell 7500 menu to changed the ssid

View 5 Replies View Related

Using Westell 7500 Dsl Modem / Router As Stand Alone?

Feb 11, 2012

I have a cable modem but need to hook up 2-3 computers. I cant get internet through my d link router, but can still use it for home networking. I tried getiing into the d link with 192.168.2.1 but failed...resetting does nothing. I also have a westell 7500 dsl modem/router but it also fails to supply any comp with internet, although only my xp comp can access it. I can not get into the routers. Resetting does nothing.

View 11 Replies View Related

Bridge Dlink DIR-628 To Westell 7500 Modem?

Feb 12, 2012

I have a Westell 7500 wireless modem that I would like to bridge to my Dlink DIR-628.

View 1 Replies View Related

Wireless Modem Westell 7500-Power Shuts Off

Mar 1, 2013

I have DSL service through Verizon, using the wireless modem Westell 7500. At least 1-2 days a week the power light goes out on the modem. I typically reboot the modem and it takes 1-2 minutes to restart but sometimes I have to reboot a second time in order to get the power light to go on.

View 2 Replies View Related

Westell 7500 - Can Dsl Router Connect To A Broadband Modem

Sep 11, 2011

can a westell 7500 router/modem dsl from verizon connect to optimum broadband cable?

View 1 Replies View Related

Accessing Settings Of Westell 7500 Modem / Router

Jan 6, 2012

I am very new to port forwarding and firewall issues. I have been told that the software issue that I have probably is a router/modem issue as every other possibility has been ruled out. I have a Westell 7500 modem. How do I access, set or change settings on it? And, which is the better modem, a Westell 7500 or a Westell 327W??

View 1 Replies View Related

Wireless :: Can't Add Two DLink Routers To Westell 7500 Modem / Router?

Jun 18, 2011

We are using a Westell 7500 wireless modem/router from Frontier without any problemsI have two d-link wireless n300 routers that I want to add to network so I can add them to our DirecTV DVR's. I have tried using the D-link CD and instructions without any success. Everytime it prompts me for my 1st router's (the Westell's) login/password, it says it's invalid. If I then click to continue w/o the logon and password, it then gives me an error when it is trying to add the d-link. I have tried everything. My Westell IP is 192.168.1.1. How can I access and add the d-link routers? Is there an easier way?

View 16 Replies View Related

No Internet Connection Windows XP And Westell 7500 Modem Router?

Oct 12, 2011

I recently needed a new router from my internet provider. They came to my home and set up Westell 7500 modem router. My home computer brings up internet with no problems or delays. Unfortunately, my wireless laptop won't recognize any network.I plugged it in using the ethernet cord directly to laptop and modem and still no internet. I'm frustrated, I use my laptop all the time and without the internet it's worthless.

View 1 Replies View Related

Free Scan To Determine Ip Address Of Westell 7500 Router?

Mar 8, 2012

Is there a free scan to determine ipaddress of westell7500 router?

View 3 Replies View Related

Westell 7500 DSL Modem / Router Only Works When Connected To Desktop Via Ethernet

Jun 10, 2012

So I have a Westell 7500 Modem/Router with Century Link DSL. I've been running a couple of laptops and my wifi enabled TV on the wireless. A few days ago I got a new desktop PC (Windows 7) and plugged the ethernet cable into it. Everything was great but the wireless was a bit slow for the TV so I plugged that in with an ethernet cable too. No problems for a few days. Today, we had a power blip and everything reset and I noticed that the internet light on the modem was solid red and I couldn't access the internet on any machine (ethernet or wifi). I called the ISP who said there was an outage in the area. A few hours later, solid green light on the modem BUT the TV (ethernet connected), my iphone, and my laptops could NOT connect, despite the network showing up with a full signal. Oddly, my new PC, connected via ethernet was fine so I played some Diablo (side note). Here's the deal: the new PC connects just fine but nothing else will. If I unplug the ethernet cable to the PC or disable the LAN connection, the red internet light appears on the modem. It seems as though the PC has hijacked the modem in some way. Even the TV won't connect with the ethernet cable. The only way the internet works now is if the modem is connected to the new PC. I've done all the resents - unplugged the modem and let it sit for 10-15 minutes, accessed the router settings, etc etc. Why would this start happening now after everything was working well for several days and how do I fix it? I need the wifi connection! Update: Plugged my Macbook Pro into the ethernet cable (took it out of new PC) and it works.

View 1 Replies View Related

Linksys Wireless Router :: E3200 - Westell 7500 Modem / PCs Not Getting Internet

Feb 7, 2012

I used these instructions to put my Fairpoint westell 7500 modem/router into bridge mode: [URL].  Then I hooked my new e3200 to the westell 7500, but no matter what I tried, I could not get any PCs hooked to the e3200 to be able to get to the internet.so able to get to internet too. My questions are:Is there any downside to doing it this way? (ie, not putting westell in bridge mode).Can this cause any slowness or conflicts? Any reasons why bridge mode may not have worked?

View 4 Replies View Related

Change Mac Address Westell A90-750015?

Feb 9, 2011

How do I go about changing the mac address on a Westell A90-750015 (Verizon Wireless Router), I have checked all the web-interface menus and don't see anywhere to change it. I need to clone my Main computer's Mac address to this Westell's Mac address in order to connect other LAN computer to the Internet. I'm using Comcast cablemodem to connect directly to main computer, but as it is right now if I try to connect the comcastmoded to the Westell router and from westell router to computer, then Internet does not work.

View 4 Replies View Related

How To Upgrade To Westell 7500

Mar 7, 2011

i have a westell 6110 that i want to upgrade to westell 7500; how to do this ?

View 1 Replies View Related

How To Open NAT On Westell 7500

Oct 8, 2011

How do I open my NAT on my westell 7500

View 3 Replies View Related

Cannot Port Forward With Westell A90 7500

Feb 1, 2011

I have been running routers and port forwarding for like the last 8 years and I am absolutely stumped why this router will not do it.I have a host/remote app where the remote accesses the host on port 7777 but it will not work even after adding that in the router admin.I also set the firewall to allow everything to make sure it is not part of the problem.

View 13 Replies View Related

Connecting DIR-645 To Westell 7500 Router?

Dec 18, 2011

Any issues connecting a DIR-645 router to a Westell 7500 router? I can connect a WRT54G router to the Westel; using 2 different SSIDs and 2 different channels and all is well, but I'm ready to just throw out this POS DIR-645. Not sure why/who gave it all these 'rave reviews'! Documentation is horrible and D-LInk is hopeless.

View 8 Replies View Related

Can't Get Westell 7500 To Navigate To Page

Oct 1, 2012

I am trying to navigate to the port forwarding page but cannot get to it. Some admin pages on this load and others do not, unless you click them about 15 times.

Here is the page I am trying to get on it now. [URL] And all i get is a blank page on the browser.

View 1 Replies View Related

How To Access Westell 7500 Menu

Jun 2, 2012

My westell 7500 my be on the same freq. as my microwave because every time that I turn on the microwave my speakers go out or make all kinds of noise

View 2 Replies View Related

How To Access The Westell 7500 Menu

Mar 9, 2013

Tried E2 port IP 192.168.1.1 unable to connect what am I doing wrong. Petro-stuff

View 1 Replies View Related

Westell 7500 Router For Century Link

Oct 23, 2012

I bought a Westell 7500 router off ebay to replace the same router provided by century link as I was trying to avoid rental fees. My computer recognizes there is a signal, but I can't get the internet to connect. Any settings I should change? The router I purchased was configured to at&t service. I have Century link. Century link won't assist me because it isn't their router.

View 3 Replies View Related

Westell 7500 Not Connecting To Windows XP Computer

Dec 21, 2011

I had to upgrade my 2Wire router for ATT because it kept shutting down by itself. I received a Westell 7500 today and sucessfully added my laptop, two iPhones and XBOX onto the network. Laptop was hooked through ethernet cord for original setup, but then sucessfully connected to wifi. XBOX is hardwired in with port forwarding and open NAT. I have a desktop in another room that I would like to connect to Westell's network, but cannot get it to work. It used to connect to the 2Wire wirelessly, but will not connect to the Westell. It runs Windows XP. Trying to get an answer here, before I call ATT. It recognizes the wireless network, but will not connect.

View 1 Replies View Related

Boost The Wireless Internet Signal From Westell 7500?

Apr 4, 2012

I have my Westell model 7500 in the barn office. I need the wireless internet in the apartment that was built in the front of the barn. The living room, where I need the signal for Roku, Kindle, and laptop, is approximately 60 to 70 feet from the modem. For awhile I had a low signal strength and I could use the internet but now it is nonexistent in the apartment. The Westell was provided by my internet supplier. How do I boost the signal so that I can get it in my apartment?

View 1 Replies View Related

Westell 7500 Router / Set IP Bandwidth To Main Priority?

Sep 10, 2012

I have about 4 different devices accessing the same network, which lags my pc gaming severely. I was wondering if there is a way to set my IP to the main priority. I am using a Westell 7500 router.

View 1 Replies View Related

Why Wont Compaq Laptop Connect To A Westell 7500

Apr 14, 2011

I just got a new router/modem from Frontier and the darn thing will not connect. I have a Compaq laptop with Windows 7 64 bit based system. What do I do?

View 3 Replies View Related

Cisco Routers :: RVS4000 With Verizon DSL / Westell 7500?

Mar 18, 2012

We have an existing RVS4000 that has been coexisting peacefully with an ISP managed Netopia 2241N. That configuration has worked fine for over a year.The company is switching to using Verizon DSL instead. Verizon sent a Westell Model 7500 router. The router works fine with a standalone PC but, in none of the modes can I get internet connectivity through the Westell to the RVS4000. I can't ping the gateway or the DNS addresses and there is zero activity. I've tried the default "routed bridge" settings on the modem as well as the "bridge" settings. I can only get these working directly on a PC but as soon as I put the RVS4000 in between nothing seems to be getting through. I've tried turning off all Firewall features in both devices but hasn't worked.
 
There is a single, static IP. What specific modes and settings should be in the RVS4000 to communicate with the Westell Model 7500 in "bridge" mode?What adjustments should be made to the Westell to pass along the necessary ports that will be needed?Even though it is a business account, Verizon refuses any assistance beyond getting the unit functioning with a single computer and, if requested, setting their Westell to "bridge" mode.

View 5 Replies View Related

Port Forward Through 2 Routers - Linksys E1000 / Westell 7500

Feb 20, 2012

I have a westell 7500 with fairpoint service hooked up to my DSL line. I have disabled woreless on the westell. I then have a linksys e-1000 connected to the westell 7500. I have one wired computer on that network, my imac/game server, my main PC, my wii and an ipod touch connected connected to the linksys e-1000 wirelessly. I want to forward port 25565 through these routers to my imac. How can I do this? I have tried portforward.com, and a million other things.

View 2 Replies View Related

Westell 7500 / Setup An Internet Connection To My Directv Hd Receiver?

May 30, 2012

I have a Vizio smart tv with built in wifi. I have Centurylink dsl service with a Westell 7500 gateway. All of my wifi devices, including my tv can access the internet appropriately. I also have a wii connected to my tv which can access the internet via wifi. My question is---is there anyway to setup an internet connection to my directv hd receiver using the wifi connection through my tv or wii? I really do not want to buy anymore equipment and I only have one phone line run with dsl service.

View 1 Replies View Related

SMCD3GN2 Modem - How To Change IP Address (Windows 7)

Aug 13, 2012

I am a Rogers Customer (Canadian isp) whch uses DHCP IP address. My set up is like so: SMCD3GN2 Modem with gateway and wireless mode disabled. (i'm using it as a pure modem) 2 of its 4 ports are active, one is connected to my pc directly and the other is conencted to a d-link router. The router is connected to 4 other pc's + some wireless devices. What I want to do is change my IP address ( the pc with the direct connection ) in windows 7. I can effectively do this by simply shutting the modem off for about 30 seconds. Luckily my isp pretty much continuously assigns me a new IP address every time I do this.

The issue is I don't want to disrupt my entire network ( the router ) With windows XP I used to be able to go into cmd and ipconfig/release, then go to my ipv4 settings and set a custom spam ip address/subnet and then go back to automatic and then ipconfig/renew and voila I would have a new IP address. With windows 7 I have no luck. I have tried spoofing/changing my mac address of my network card/adapter and it results in my modem not assigning me an IP address. Is there any efficient way to change my DHCP IP address in windows 7 without disrupting my entire network?

View 7 Replies View Related

Thomson St-330 Modem - How To Change Global IP Address Without Restarting Router

Dec 4, 2012

I used to have a Thomson st-330 USB modem for my ADSL network. When I wanted to change my IP i just disconnected and reconnected a dial up connection that does the job instantly! (a wan miniport + a batch file to disconnect/recoannect with my password and username)Few days ago i bought a new modem/router (TP-LINK TS-W8951NS)Before that all I knew was that if I wanna change the ip address (if I have a router) was a batch file with commands ipconfig /release/renew.I now know that this changes the ip of my PC not the global IP! So how would I change it without restarting the router? (When i change something in my router interface page (PVC1.2.3....etc) my IP changed instantlybut how do I do this without accessing the router, like commands and a batch file etc? I just found out that my global IP changed on its own after like 30-60 min :S why is that! and to do so manually???

View 2 Replies View Related

Sb5101 Modem / Wndr3700 V2 Router - Change Bigpond IP Address (cable)?

Jun 13, 2012

I have cable and am using an sb5101 modem and an wndr3700 v2 router. I have tried changing the router mac address with no luck. Also the ip address is dynamic not static verified by bigpond.how to change my ip address.

View 3 Replies View Related

How To Change NAT Type On Westell A90-750018-07

May 18, 2011

I have all the PS3 and Activision ports. What numbers go where in the router's port forwarding screen. My ISP says that the PortStart and Base Host Port should be the same numbers and the PortEnd should be the number at the end of the range (10070-10080 for ps3). I'm going with that for the PS3 TCP numbers, but don't know which numbers to put in for the PS3 UDP or the Activision TCP and UDP.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved