Boost The Wireless Internet Signal From Westell 7500?
Apr 4, 2012
I have my Westell model 7500 in the barn office. I need the wireless internet in the apartment that was built in the front of the barn. The living room, where I need the signal for Roku, Kindle, and laptop, is approximately 60 to 70 feet from the modem. For awhile I had a low signal strength and I could use the internet but now it is nonexistent in the apartment. The Westell was provided by my internet supplier. How do I boost the signal so that I can get it in my apartment?
View 1 Replies
ADVERTISEMENT
Dec 17, 2012
How to boost signal strength on westell
View 1 Replies
View Related
Feb 7, 2012
I used these instructions to put my Fairpoint westell 7500 modem/router into bridge mode: [URL]. Then I hooked my new e3200 to the westell 7500, but no matter what I tried, I could not get any PCs hooked to the e3200 to be able to get to the internet.so able to get to internet too. My questions are:Is there any downside to doing it this way? (ie, not putting westell in bridge mode).Can this cause any slowness or conflicts? Any reasons why bridge mode may not have worked?
View 4 Replies
View Related
Oct 12, 2011
I recently needed a new router from my internet provider. They came to my home and set up Westell 7500 modem router. My home computer brings up internet with no problems or delays. Unfortunately, my wireless laptop won't recognize any network.I plugged it in using the ethernet cord directly to laptop and modem and still no internet. I'm frustrated, I use my laptop all the time and without the internet it's worthless.
View 1 Replies
View Related
May 30, 2012
I have a Vizio smart tv with built in wifi. I have Centurylink dsl service with a Westell 7500 gateway. All of my wifi devices, including my tv can access the internet appropriately. I also have a wii connected to my tv which can access the internet via wifi. My question is---is there anyway to setup an internet connection to my directv hd receiver using the wifi connection through my tv or wii? I really do not want to buy anymore equipment and I only have one phone line run with dsl service.
View 1 Replies
View Related
Mar 1, 2013
I have DSL service through Verizon, using the wireless modem Westell 7500. At least 1-2 days a week the power light goes out on the modem. I typically reboot the modem and it takes 1-2 minutes to restart but sometimes I have to reboot a second time in order to get the power light to go on.
View 2 Replies
View Related
Jun 18, 2011
We are using a Westell 7500 wireless modem/router from Frontier without any problemsI have two d-link wireless n300 routers that I want to add to network so I can add them to our DirecTV DVR's. I have tried using the D-link CD and instructions without any success. Everytime it prompts me for my 1st router's (the Westell's) login/password, it says it's invalid. If I then click to continue w/o the logon and password, it then gives me an error when it is trying to add the d-link. I have tried everything. My Westell IP is 192.168.1.1. How can I access and add the d-link routers? Is there an easier way?
View 16 Replies
View Related
Mar 7, 2011
i have a westell 6110 that i want to upgrade to westell 7500; how to do this ?
View 1 Replies
View Related
Oct 8, 2011
How do I open my NAT on my westell 7500
View 3 Replies
View Related
Feb 1, 2011
I have been running routers and port forwarding for like the last 8 years and I am absolutely stumped why this router will not do it.I have a host/remote app where the remote accesses the host on port 7777 but it will not work even after adding that in the router admin.I also set the firewall to allow everything to make sure it is not part of the problem.
View 13 Replies
View Related
Dec 18, 2011
Any issues connecting a DIR-645 router to a Westell 7500 router? I can connect a WRT54G router to the Westel; using 2 different SSIDs and 2 different channels and all is well, but I'm ready to just throw out this POS DIR-645. Not sure why/who gave it all these 'rave reviews'! Documentation is horrible and D-LInk is hopeless.
View 8 Replies
View Related
Oct 1, 2012
I am trying to navigate to the port forwarding page but cannot get to it. Some admin pages on this load and others do not, unless you click them about 15 times.
Here is the page I am trying to get on it now. [URL] And all i get is a blank page on the browser.
View 1 Replies
View Related
Jun 2, 2012
My westell 7500 my be on the same freq. as my microwave because every time that I turn on the microwave my speakers go out or make all kinds of noise
View 2 Replies
View Related
Mar 9, 2013
Tried E2 port IP 192.168.1.1 unable to connect what am I doing wrong. Petro-stuff
View 1 Replies
View Related
Feb 11, 2012
I have a cable modem but need to hook up 2-3 computers. I cant get internet through my d link router, but can still use it for home networking. I tried getiing into the d link with 192.168.2.1 but failed...resetting does nothing. I also have a westell 7500 dsl modem/router but it also fails to supply any comp with internet, although only my xp comp can access it. I can not get into the routers. Resetting does nothing.
View 11 Replies
View Related
Feb 12, 2012
I have a Westell 7500 wireless modem that I would like to bridge to my Dlink DIR-628.
View 1 Replies
View Related
Oct 23, 2012
I bought a Westell 7500 router off ebay to replace the same router provided by century link as I was trying to avoid rental fees. My computer recognizes there is a signal, but I can't get the internet to connect. Any settings I should change? The router I purchased was configured to at&t service. I have Century link. Century link won't assist me because it isn't their router.
View 3 Replies
View Related
Jun 7, 2011
How do I get into the westell 7500 menu to changed the ssid
View 5 Replies
View Related
Dec 21, 2011
I had to upgrade my 2Wire router for ATT because it kept shutting down by itself. I received a Westell 7500 today and sucessfully added my laptop, two iPhones and XBOX onto the network. Laptop was hooked through ethernet cord for original setup, but then sucessfully connected to wifi. XBOX is hardwired in with port forwarding and open NAT. I have a desktop in another room that I would like to connect to Westell's network, but cannot get it to work. It used to connect to the 2Wire wirelessly, but will not connect to the Westell. It runs Windows XP. Trying to get an answer here, before I call ATT. It recognizes the wireless network, but will not connect.
View 1 Replies
View Related
Sep 11, 2011
can a westell 7500 router/modem dsl from verizon connect to optimum broadband cable?
View 1 Replies
View Related
Jan 6, 2012
I am very new to port forwarding and firewall issues. I have been told that the software issue that I have probably is a router/modem issue as every other possibility has been ruled out. I have a Westell 7500 modem. How do I access, set or change settings on it? And, which is the better modem, a Westell 7500 or a Westell 327W??
View 1 Replies
View Related
Sep 10, 2012
I have about 4 different devices accessing the same network, which lags my pc gaming severely. I was wondering if there is a way to set my IP to the main priority. I am using a Westell 7500 router.
View 1 Replies
View Related
Apr 14, 2011
I just got a new router/modem from Frontier and the darn thing will not connect. I have a Compaq laptop with Windows 7 64 bit based system. What do I do?
View 3 Replies
View Related
Apr 9, 2012
How to change ip address on frontier mod.7500 so i can run them together
View 1 Replies
View Related
Mar 18, 2012
We have an existing RVS4000 that has been coexisting peacefully with an ISP managed Netopia 2241N. That configuration has worked fine for over a year.The company is switching to using Verizon DSL instead. Verizon sent a Westell Model 7500 router. The router works fine with a standalone PC but, in none of the modes can I get internet connectivity through the Westell to the RVS4000. I can't ping the gateway or the DNS addresses and there is zero activity. I've tried the default "routed bridge" settings on the modem as well as the "bridge" settings. I can only get these working directly on a PC but as soon as I put the RVS4000 in between nothing seems to be getting through. I've tried turning off all Firewall features in both devices but hasn't worked.
There is a single, static IP. What specific modes and settings should be in the RVS4000 to communicate with the Westell Model 7500 in "bridge" mode?What adjustments should be made to the Westell to pass along the necessary ports that will be needed?Even though it is a business account, Verizon refuses any assistance beyond getting the unit functioning with a single computer and, if requested, setting their Westell to "bridge" mode.
View 5 Replies
View Related
Mar 8, 2012
Is there a free scan to determine ipaddress of westell7500 router?
View 3 Replies
View Related
Feb 20, 2012
I have a westell 7500 with fairpoint service hooked up to my DSL line. I have disabled woreless on the westell. I then have a linksys e-1000 connected to the westell 7500. I have one wired computer on that network, my imac/game server, my main PC, my wii and an ipod touch connected connected to the linksys e-1000 wirelessly. I want to forward port 25565 through these routers to my imac. How can I do this? I have tried portforward.com, and a million other things.
View 2 Replies
View Related
Mar 12, 2012
What is the easiest way to boost the the signal from a wireless router(1 year old), weak signal going into a different room. Yes has to go around a wall into another room.
View 7 Replies
View Related
Jun 10, 2012
So I have a Westell 7500 Modem/Router with Century Link DSL. I've been running a couple of laptops and my wifi enabled TV on the wireless. A few days ago I got a new desktop PC (Windows 7) and plugged the ethernet cable into it. Everything was great but the wireless was a bit slow for the TV so I plugged that in with an ethernet cable too. No problems for a few days. Today, we had a power blip and everything reset and I noticed that the internet light on the modem was solid red and I couldn't access the internet on any machine (ethernet or wifi). I called the ISP who said there was an outage in the area. A few hours later, solid green light on the modem BUT the TV (ethernet connected), my iphone, and my laptops could NOT connect, despite the network showing up with a full signal. Oddly, my new PC, connected via ethernet was fine so I played some Diablo (side note). Here's the deal: the new PC connects just fine but nothing else will. If I unplug the ethernet cable to the PC or disable the LAN connection, the red internet light appears on the modem. It seems as though the PC has hijacked the modem in some way. Even the TV won't connect with the ethernet cable. The only way the internet works now is if the modem is connected to the new PC. I've done all the resents - unplugged the modem and let it sit for 10-15 minutes, accessed the router settings, etc etc. Why would this start happening now after everything was working well for several days and how do I fix it? I need the wifi connection! Update: Plugged my Macbook Pro into the ethernet cable (took it out of new PC) and it works.
View 1 Replies
View Related
Jan 24, 2013
boost the signal of a wireless router using another wireless router what I mean is that am receiving wireless signal but it is weak can I use another wireless router in my place to boost the signal>
View 11 Replies
View Related
Sep 16, 2011
how can boost my wireless 3GModem signal?
View 1 Replies
View Related
Jul 20, 2011
I'm trying to increase signal strength on my netgear router for my house.
View 4 Replies
View Related
Oct 22, 2012
I used to have a DLINK router which covered my whole house with its Wifi signal. After upgrading to the SRP541W router, only the very close vicinity of the router has any acceptable level of signal to use devices. I seriously need to improve WIFI range to accomodate my small business. I asked the Live chat technician and the answer was "This device does not support external antennae" and then silence. Okay it is not supported but what I am looking for is a solution, not a dead end.
For example, is there a cisco repeater/extender that I could deploy that works with the SRP541W router? Any experience adding one long cable and putting one antenna at a different location of the house?
View 3 Replies
View Related
