Wireless :: Can't Install DHCP And DNS
Mar 4, 2012can't install DHCP + DNS i try install it from add/remove and i select networking services and i have 1 service to install is internet gateway device?
View 1 Replies
ADVERTISEMENT
Install And Setup Dhcp Server?
Oct 30, 2011I've made hotspot ad hoc and then my client try to connect my hotspot but it must setting manually...how to my client connect to my hotspot automatically not manually??? and how to install and setup dhcp server i windows 7...
View 6 Replies View RelatedCisco Switching/Routing :: Assigning IP Address Through DHCP On New 4500E Install?
Nov 20, 2011The DHCP/DNS server is on ip address 10.1.100.103 with an alt on .102 I'm attempting to integrate a 4510R+E into an existing network and use existing DHCP/DNS windows 2008 server to push out IP addresses to connected computers.
I want to assign a VLAN to every port for management purposes and then I put an IP helper address on every VLAN.
I've attached a the 4500E partial config. I'm attempting to get Gi1/44 to a state where I can plug a computer into it an resolve an ip address and gain internet access like all the devices on the existing network can do.
I've created a new scope in DHCP with the ip subnet of 10.60.211.0 255.255.255.0 It leases addresses from .1 to .253
The computer will not resolve ip addresses with this config.
Cisco Switching/Routing :: 2921MS DHCP NACK With DHCP Relay?
Nov 11, 2012I have some DHCP trouble since I subnetted my network with a 2921. My clinets are in 172.16.2.0/23 and DHCP servers are in 172.16.5.0/24.Sometimes, randomly I guess, I get NACK from my DHCP server, and if I look into DHCP logs I got something like this:
15,11/09/12,09:52:27,NACK,172.16.3.172,switchE51D12.host.com,A0CF5BE51D12,,0,6,,,,,,,,
15,11/09/12,09:52:28,NACK,172.16.3.172,switchE51D12.host.com,A0CF5BE51D12,,0,6,,,,,,,,
15,11/09/12,09:52:29,NACK,172.16.3.172,switchE51D12.host.com,A0CF5BE51D12,,0,6,,,,,,,,
[code]....
Cisco Switching/Routing :: 3550 / 2950 DHCP Relay Option To Router Handing Out DHCP
Apr 3, 2012Have a client wanting to hand out public ip addresses to all clients from a PFSense Firewall terminating the internet connection.
How do I allow the Cisco Switches currently in place, configured with private ip addresses in the 10.10.x.x ranges and Vlans, where the main 3550 layer 3 has defined dhcp scopes for each vlan, to relay dhcp requests from all vlans to the PFSense firewall?
I assume I would take off the currently defined dhcp scopes for the vlans and configure each vlan/switch with the ip helper address and specify the PFSense firewall and that Nat would have to be disabled onthe firewall?
D-Link DIR-655 :: DHCP Turned Off As ASA 5500 Is Providing DHCP
May 30, 2011I have a Cisco ASA 5500 as the main router with a DIR-655 as a wireless access point behind it. DHCP is turned off on the 655 as the ASA is providing DHCP. This worked great for about a year and now suddenly, without any changes, I'm having problems. The only thing that connects without a problem is a laptop, which shows up on the device list with an IP. Other devices have problems. iPhones connect, show an IP on the device itself, but when listed in the connected list on the 655 show no IP. The connection is super slow. An Airport Express will connect, but again, shows no IP in the connected list on the 655. Using the ethernet cable from the Airport Express, nothing can get an IP. I can live with the iPhone not connecting, but the Airport Express not connecting is a major problem. Any reason why this would just stop working one day?
View 2 Replies View RelatedWireless :: How To Install The Rocket Hub
Jan 6, 2012trying to install the rocket hub
View 1 Replies View RelatedCan't Install Wireless Network On PC - TCP/IP?
May 30, 2011I have cable internet with a wireless router. My home computer/internet works fine My second computer connected via wireless was recently infected with a virus and I had to do a complete system restore. Since doing that, I cannot establish a connection. My computer can find the wireless connections and the wireless network connection shows enabled show that it but no IP address. If I repair, I get the error message "TCP/IP is not enabled". I tried enabling, reinstalling, I have tried every suggestion on this topic that I have found in other forums (running command, etc).
View 1 Replies View RelatedInstall Wireless To Get Network Key?
Jul 2, 2011I need to install my wireless I need network key.
View 4 Replies View RelatedInstall A Wireless Network Throughout Station
May 1, 2012We would like to install a wireless network throughout the station. Currently we have a wired network with 15 PC's and are looking at obtaining tablets for our squads and apparatus. The station is quite large and is divided by the vehicle bays.I'm thinking that we will need multiple access points throughout the station. I am familiar with setting up one wireless router but not with multiple access points.
View 2 Replies View RelatedCannot Successfully Install USB Wireless Adapter
Jun 4, 2011I recently had to wipe (start all over again) my fathers PC as it become infected with a virus which I struggled to remove. When trying to set up the wireless connection via my virgin wireless manager I followed all the steps correctly until the last where it could not find my USB wireless adapter. I installed the latest software for the adapter from the netgear website but it will still not succesfully install the drivers fro the adapter.
View 1 Replies View RelatedInstall PCI Wireless Adapter To Desktop PC
Jul 13, 2011I need to install a wireless PCI Adapter to my Dell Optiplex small form desktop computer, but how can i identify what type of PCI Bus slot do i have without opening the case.
View 1 Replies View RelatedCan't Install Wireless Drivers In Windows Xp
Feb 9, 2011My windows xp wireless drivers was functioning normally in my dell610.but accidentally i uninstalled it, now i am trying to install it but it ends up with an icon at the bottom which shows that it is installing but nothing is going on.i have tried this several time but i failed.
View 1 Replies View RelatedCisco Wireless :: Install BR1310 For WLC?
May 16, 2012I have a project ahead and I need to clarify some things before starting this project. I will install a new WLC 5508 and I have 8 AIR-BR1310G-A-K9-R, so Im wondering if I can use them.
- Can this model be converted to LAP?, right now they are autonomous.
- I need to used them as AP not bridge and under the governance of a WLC. Could this be possible?
- The intention is to use them for outdoor operation. Should I use one or two outdoor antennas?.
- ANT-2506 could be a good choice?.
Cisco Wireless :: Install AC 3.1 On Windows 7 64-bit?
Sep 7, 2012I am trying to install AC3.1 on windows7 64-bit. But i get the error installation ended prematurely without any reasons for failure. I posted the errors here. I tried installing AC3.0 on windows xp and i get same problem. NAM is not getting installed . I just want to use the AC client to connect to wireless network.
View 2 Replies View RelatedWireless :: ZAMZOM (and Other) Network Tools Won't Install?
Apr 13, 2013ZAMZOM downloads OK, as nearly as I can tell, but I always get "error 1001" when trying to install it.
View 3 Replies View RelatedWireless :: How To Install Dell 968w To Another Laptop
Feb 7, 2011Have a network already set up and I'm trying to add another laptop. I recall using a thump drive to install the last computers but can not remember how. Nor I can located original install disk.
View 1 Replies View RelatedWireless :: Belkin / How To Install Range Extender
Mar 8, 2013I just bought belkin range extender and I can't get it connected to my network because the 192. page won't open?
View 1 Replies View RelatedWireless :: How To Install Default Email Client
Jan 21, 2011how do i install the default client e-mail. i cannot open my mail
View 3 Replies View RelatedWireless Laptop Won't Connect To Internet After New Install Of XP?
Jul 18, 2011I just reinstalled XP on my Dell inspiron 1100. Everything works good expect I can't connect wireless to the internet. I use my Ethernet cable and everything works great. The wireless setting say's I'm connected with excellent strength, also I have an IP address. I went to disk management and check for conflicts and noticed the PCI modem was yellow. I was told to disable it because I don't use a modem so it should not be a problem.
View 5 Replies View RelatedBelkin Wireless - Install Drivers For Router?
Jan 22, 2012My computer crashed the other day and HDD failed. i finally got it back up and running but ive been using a usb wireless adapter. i do not have the disk anymore to install the drivers, nor will my computer install them from the internet because i dont have an internet connection on my desktop. what are my options to have them installed?
View 3 Replies View RelatedHow To Install New DSL Modem To A Existing Wireless Network
Feb 28, 2013I have a wireless set up at home and recently had to replace my DSL modem (due to my cat knocking over my coffee cup and spilling coffee on my old modem) I have managed to connect to the internet directly through the modem, but want to connect wireless. How can I connect my new modem to my old wireless network?
View 3 Replies View RelatedLinksys Wireless Adapters :: How To Install WUSB54GSC
May 26, 2011How to install model WUSB54GSC.
View 5 Replies View RelatedLinksys Wireless Adapters :: Can't Install WMP54G?
Jul 5, 2011I recently re-installed Windows on my PC, and I had the Wireless-G PCI Adapter installed before I done the re-installation.Now I've re-installed Windows, the adapter doesn't work. Do I have to re-do the whole process again? Also, I didn't actually install it myself, so any detailed step-by-step tutorial?
View 3 Replies View RelatedLinksys Wireless Router :: Way To Install E3000
May 9, 2012install linksys e3000.
View 1 Replies View RelatedLinksys Wireless Adapters :: AE1000 Won't Install On Win XP Sp3?
Nov 2, 2012I had a hard drive failure recently and replaced my HDD with an identical HDD (WD 500 AAKS) and did a restore from my WD Passport Essential. Everything works as before except I can't install my AE1000 wireless adapter. The OS recognizes the new hardware and I attempt instalation form the setup CD. Istallation goes until it gets to the "Installing" step and then it just stays there forever until it comes back with an error. I am accessing the internet now through a cat 5 ethernet hook-up.
View 2 Replies View RelatedTP-Link 300Mbps Wireless :: Why To Install CFW On Wr1043nd
Jan 25, 2013Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12
I just got one of these to replace my old wrt54g. Seems to me a lot of people are flashing theirs with dd-wrt or openwrt. I was wondering why exactly. Unlike the old wrt54g, the tp-link stock firmware supports a lot of features in my view, especially the so wanted QOS. Do the CFW give the wr1043nd more stability or maybe better performance? Or is it about features? What features a CFW would add to the stock fw?
Linksys Wireless Adapters :: AE2500 To Run And Install On Mac
Mar 29, 2013What i have to download and where to download some kind of program that will allow me to run/install this on my MAC. Model: AE2500
View 1 Replies View RelatedCisco Wireless :: Install Two AIR-WLC2125-K9 At The Same Network?
Dec 11, 2011I have one AIR-WLC2125-K9 installed and controll 25 APs,
Now i want to add some APs, so i have asked my supplier and he propose to add an other AIR-WLC2125-K9, i will have all APs contrlled by 2 x AIR-WLC2125-K9.
How can i add the second controller to work with the first one?
Cisco Wireless :: Could Not Install Red Hat Enterprise 5.0 On MSE 3355
Jun 26, 2012I want to reinstall the MSE image that was sent to me by Cisco TAC Team, however when I try to reinstall the MSE Application, however when I try to install it, the CD boots and show me the Red Hat enterprise image, then sends me black screen with the message "Kernel alive, Kernel direct mapping tables up to 480000000 @ 8000-1b000" and it stay there.
View 2 Replies View RelatedDell :: 2010 - How To Install Wireless Driver Again
Jun 3, 2013I reinstalled my windows7 again, because my laptop was jamming so much. But i cant connect to internet via wireless. I dont have any other options to connect my computer to internet other than using wi fi. I think it says i didnt install the wifi driver. i tried something, but it didnt work. btw i have inspiron 15r bought in the end of 2010
View 16 Replies View RelatedCisco Wireless :: How To Install WAP321 With Repeater
Mar 21, 2012How I install the WAP321 with repeater?
View 3 Replies View RelatedCisco Wireless :: 2504 - Version To Install (7.0.235.3 Or 7.3.101.0)
Sep 17, 2012We have bought an 2504 Wireless Controller and now i want to download the newest Software, actually the Wireless Controller runs release 7.2.103. In the download section from Cisco i've found two "latest versions" the 7.0 with release date from 11.09.2012 and the other 7.3 with the release date 30.08.2012.
Now I'm a bit confused about this, because the higher release has an lower release date : Can you tell me the difference between this versions? and which version i should install?