Cannot Successfully Install USB Wireless Adapter
Jun 4, 2011
I recently had to wipe (start all over again) my fathers PC as it become infected with a virus which I struggled to remove. When trying to set up the wireless connection via my virgin wireless manager I followed all the steps correctly until the last where it could not find my USB wireless adapter. I installed the latest software for the adapter from the netgear website but it will still not succesfully install the drivers fro the adapter.
View 1 Replies
ADVERTISEMENT
Jul 13, 2011
I need to install a wireless PCI Adapter to my Dell Optiplex small form desktop computer, but how can i identify what type of PCI Bus slot do i have without opening the case.
View 1 Replies
View Related
Jan 15, 2012
From the Dell Drivers and Downloads page, I downloaded the WiFi Link 5300 driver (R213215.exe) assuming it would enable my WiFi to run. I tried to install it and was met with an error message: "This installation is not supported on this operating system version. The setup application will exit." It will not install and my WiFi is still down.My system is an Alienware m15x with Windows 7 64-bit. I recently re-installed Windows due to a small bug that was hampering Google Chrome. Before I re-installed Windows, the WiFi was working just fine. Any working WiFi driver?
View 3 Replies
View Related
Feb 18, 2012
I would like to install a wireless adapter in my "Fujitso Siemens Scaleo P" desktop ,how do find out which adapter is the most suitable,
View 1 Replies
View Related
Nov 8, 2009
I am running Windows 7 with the WUSB600N (v.2). Here is how I got it to work.The driver support is not a .exe. You will have to install it yourself...but it's not a big deal.Download the Windows 7 driver for your OS version from the Linksys Support page.Save it to the desktop and then unzip it to the desktop so you can find it easier.Once unzipped you will see 3 folders: Mac, Win7 32 and Win7 64. Choose accordingly.What I did was install it through the "Device Manager". (Right click "My Computer", choose "Manage", then Device Manager",or use the "Search Bar under the Start Menu...whatever. Once you are in the Device Manager...
1. Make sure your WUSB600N is inserted in your computer.
2. Navigate down to "Network Adapters" If you see your WUSB600N adapter...great! Your halfway home!
3. Right click on the "Linksys WUSB600N Adapter.
4. Choose the option to " Update Driver Software"
5. Choose "Browse My Computer for Software"
6. Navigate to the desktop and choose the folder that contains the name of your Windows 7 platform.
7. It should update but, HOLD ON! We are not done yet!!!
In order for it to start transmitting in that shiny new 5GHZ band, you must go into "Network and Sharing Center". Once there, look on the left hand side of the main window and you will see "Change adapter settings"Go there. You should see here that your existing adapter is still working (enabled) and your new Linksys WUSB600N has a big fat red "X" under it (disabled).Right click on your existing adapter and choose, "DISABLE".Then, right click on the WUSB600N adapter and choose "ENABLE".The last thing you should have to do is choose the network you want to connect to (for me it was the 5GHZ one) ..and Viola!!
View 5 Replies
View Related
Aug 24, 2009
I recently reinstalled my OS of my E1505 and was installing drivers from the Dell Resource CD (which was for an ME051, is this a problem?). But, after installing all of the drivers and system software my Intel ProSet Wireless program still says there is no supported wireless adapter on the computer...I also cannot create a connection when I connected the laptop to my hardline DSL cable.
In addition, the video card driver will not install saying that one or more files needed to complete the install were missing and it closes the install wizard. Just in case any of you can answer that as well.
View 7 Replies
View Related
Feb 23, 2013
At one time this D-link adapter was installed on this same computer but somehow the drivers got deleted.I am trying to reinstall. The computer is running Windows XP Professional. I downloaded the driver from Dlink's web site and unzipped the files on the computer.The Ethernet Controller shows up in Device Manager with the yellow ? so I right click it and the click on Update Drivers. But when I tell it to install the drivers a window comes up saying it cannot install because it cannot find the necessary software.
View 14 Replies
View Related
Aug 10, 2012
My computer has an option in the Bios and in the boot menu for the "internal network adapter boot." Can I use this to install an OS?
View 3 Replies
View Related
Apr 28, 2011
I am trying to install the software for my router (on a Windows Vista Laptop) and everytime I get to the software install and it is detecting the network-and then the program freezes and my wireless adapter is turned off. I have to force quit the program and turn the adapter back on.
View 1 Replies
View Related
Jul 23, 2011
I can install a Broadcom 802.11g network adapter into the HP G5326UK Desktop PC?
View 5 Replies
View Related
Jan 4, 2011
Any way to install this excellent WiFi adapter on Ubuntu?
View 7 Replies
View Related
Jul 13, 2012
today my Belkin 7050 wifi adapter arrived.I went through the install procedure from the cd,and when asked to plug in the adapter,I got the message asking for a notebook card,which I haven't got.It then told me that the drivers aren't installed.The device isn't showing in device manager.I called Belkin support but all the could suggest was that the device was to try it in another computer.I am unable to do this because the communal computer needs administrator rights to install programs etc.
View 10 Replies
View Related
Sep 9, 2012
bought a mini usb wifi adapter for my new computer i built from monoprice. the website says all u need to do is download the drivers from realtek and install and the unit will run. ive tried to install the driver multiple times, and when i go into the devices window, it says there is no device installed for the adapter. also after attempting to install, a bubble pops up on the task bar saying that driver did not install correctly after setup completes and reboots.
View 3 Replies
View Related
May 21, 2013
How to successfully deployed a WGB with a 5508 WLC?5508 code is 6.0.202.0 and the WGB is an AP1131AG?The documentation is ambiguous in that it states you can't use VLANs and then shows VLANs being used.I have a WLAN called wgb-link set up on the WLC with WPA-2 AES and PSK. The WLAN points to a logical interface called wgb-link which is configured to be in VLAN 9 and the default gateway is the VLAN SVI on the core switch.On the WGB I have configured the same SSID and security setup.
I am using the 5GHz radio and have set it to be a work group bridge.I have a sub interface dot11radio 1.9 configured:
encapsulation dot1q 9 native
bridge group 1
I also have an ethernet sub interface configured:
encapsulation dot 1q 9 native
bridge group 1
Int BVI1 is configured with an IP address in VLAN 9.The WGB links up fine and I can see it as a client on the WLC.
From the WGB CLI I can ping the interface on the WLC and the SVI on the core switch and any other device on the network in any VLAN.From the WLC I can ping the BVI1 address of the WGB.From the core switch I can ping the WLC interface and the WGB BVIi interface.
If I connect a laptop to the WGB ethernet port with a static IP address in VLAN 9 I cannot ping from the laptop to the WLC interface or the SVI on the core. I can only ping to the BVI address of the WGB.
View 2 Replies
View Related
Dec 8, 2012
Computer got bad virus (the FBI one on the news) so after every attempt to eradicate it failed, I did a fresh install of Windows 7 onto the computer. However for some reason it won't even acknowledge that it has a Network Adapter. When I go to Driver Devices, there is no Network Adapter to even click on to see what the adapter is so I know what kind of driver to install.
So being an optimist I installed several drivers and nothing has worked. Its set on cable connection and I can't get it to acknowledge its wi-fi. I haven't tried plugging it straight into the modem yet. That's my next step.
View 3 Replies
View Related
Dec 28, 2012
This afternoon, I plugged in a Belkin bluetooth adapter F8TO16 and paired it with a pair of 7dayshop headphones. Instead of leaving well alone with an old driver, I decided to update the Belkin driver - which went well. However, the Dell 365 Module then reported an error and trouble shooting informed me that it now had a driver error. Windows searched for and found a driver, but could not install it.. I've since downloaded and installed new Dell drivers for it but I still get the same result - can't install driver. (The module was working fine before I up-dated the Belkin driver.)
I figure I now have to un-install the Module and then install an up-dated version. Is this the right way to go and if it is, how do I go about it? I'm using Win7 64 bit on an Inspiron 1750.
View 7 Replies
View Related
Jan 24, 2013
Region : United Kingdom
Model : TD-W8960N
Hardware Version : V3
Firmware Version :
ISP : ADSL24
How to successfully get VPN passthrough working with the W8960N?
I have the W8960N providing internet to local device. I want to setup a second router, TP-Link 1043ND with WW-DRT and PPTP set up to provide a separate access point for PPTP tunnelling to VPN servers outside of the UK. HideMyAss are providing VPN servers I wish to connect to.
I have followed instruction to set up both routers but would like to know if I am missing something.
First router 192.168.1.1 is basically untouched but with ports under NAT added: ports 1723 and 47 for my second router at local IP 192.168.1.111
Second router is set up according to [URL].
I know VPN work via just my first router. I can tunnel through using an Android tablet and connect to any HMA VPN server without changing anything on the 8960N.
View 1 Replies
View Related
May 7, 2013
Region : France
Model : TL-WR841ND
Hardware Version : V8
Firmware Version : 3.13.27 Build 121101 Rel.38183n
ISP : Orange
I am wondering if it is worth switching to OpenWRT firmware for my TL-WR841N V8.0 ..Has anyone successfully switched to OpenWRT Attitude Adjustment Release (12.09) ? If so are you happy with the features and stability provided ? I checked for the Gargoyle firmware, and t seems there are still some issues with TL-WR841N release 8.0 ... Therefore I am not considering this alternative firmware for now.
View 2 Replies
View Related
Apr 24, 2013
currently using Linksys Cisco E2000 ,Firmware 1.0.04.Trying to few block sites from Access restriction - bellow is the screen shot its not working. I have alos enabled SPI Firewall from Security Tab. how could I block site successfully.
View 9 Replies
View Related
Jul 10, 2011
I've been using a WRT150N wireless router successfully up until a couple days ago, when it stopped being detected. I can plug my computer directly to my modem, and it works, so my internet connection is fine. I have an older BEFW11S4 router that I am using currently, but it is very slow compared the the N router. I've tried resetting the 150N router, and also the modem, and combinations of both, but nothing seems to work. I plugged the router into my computer without connecting the modem, but I'm not able to access 192.168.1.1 either. All the lights illuminate when the router is plugged in.
View 9 Replies
View Related
Sep 21, 2012
No matter what I do, whenever I enter the Web Interface for my E4200, the page comes up in Russian (at least I think it is russian!!)! I have changed the language to English (by trial and error discovered it was the first option at the top of the pull-down list) many times and yes, selected save at the bottom of the Setup page. I get the message back "Your settings have been successfully saved".But next time I go in, it is back to either Russian or sometimes some other wierd script, and I have to reselect English.
View 2 Replies
View Related
Apr 2, 2012
I have successfully converted my lap1242ag-c-k9 to autonomous mode. But when i try to set ssid or wep then hit apply it won't the changes i made.
View 3 Replies
View Related
Mar 18, 2013
I have a Linksys Wireless G PCI adapter. The model is WMP54gs and the serial number MGP00E416793. I am trying to install this adapter on a Windows XP media center computer. The computer is update to date with all windows updates. I need the driver and software to successfully get this adapter to fully work.
View 3 Replies
View Related
Jan 28, 2013
I wanted to know how, if there are any script which will send an alert once a file has reached a destination over an TCP network.
View 3 Replies
View Related
May 25, 2011
I have been trying to block access to Steam and Left 4 Dead 2 on a specific computer, using the correct listed ports and using the port forwarding section of the router (setting the access to deny) however they seem to still be able to access both steam and L4D2 on their computer.how I can still block the access?
View 1 Replies
View Related
Mar 29, 2012
Web Auth on 5508 running 7.2.103.0.
Issue 1: I have been trying to configured Webauth bundle however it seems that is not working.
1. login.tar created use picozip contains 3 files: login.html, terms.html, and logo.jpg.
2, uploaded via FTP to controller successfully..
3, no issue when i tried to preview on the controller
However users unable to see the login page when connected to guest wifi. when the user tried to connect cisco.com, on the browser address shows that the page redirected to url... however internet explorer / firefox display "Connection reset error".During this time, if i ask the user to type url... they can see the default login page, so no issue on connectivity to the service port.
Issue 2: Since i couldnt make that work, i have use default webauth internal. its all good. then when i tried to upload customlogo.jpg (18k size). User able to see the login page however not the logo. it shows broken image icon on the web browser. --> i can see the logo when i did preview on the controller.
Issue 3: last resort if i couldnt get the answer by sunday, how do i delete or remove the customlogo ?? so by monday users will not be seeing any errors on the page.
View 7 Replies
View Related
Mar 14, 2008
Just purchased a RVS4000. How to be successfully able to VPN into this device from os/x? If so what software / settings required.
View 6 Replies
View Related
Aug 30, 2012
I have PAT set up successfully on 6506 chassis - My outside address range is 78.24.112.114 255.255.255.240.Relevant parts of the config below: [code] This works fine but of course is only using the one IP address 78.24.112.114.how I can utilize the other outside addresses available or is this not really necessary? I've browsed through loads of Cisco docs.
View 2 Replies
View Related
Oct 25, 2012
I bought a CISCO SG200-18 switch. I added the Switch to my LAN and started the Switch (as described in the manual). The Switch starts the booting procedure (green blinking status LED) After a while, the LED starts to blink orange and green, instead of steady green.
In generally the Switch seems to work. I can access my whole network, but not the web interface of the switch itself. I also can't see the switch in the ADSL / DHCP rooter.
I also tried to boot the switch only connected to the PC. But ping on 192.198.1.254 is not working. The switch is in the same subnet like my other LAN components.
Subnetzmaske . . . . . . . . . . : 255.255.255.0
Standardgateway . . . . . . . . . : 192.168.1.1
I exchanged the switch. But the new switch shows the same behavior.
View 3 Replies
View Related
Apr 22, 2012
I am trying to set up a site to site VPN tunnel using GRE over IPSEC. Below is the configuration from both routers and debug output. I'm scratching my head on this one. I'm using two Cisco 7600 routers with SSC-400 SPA modules and 720 Supervisors. The IOS on R1 is 12.2 SXI2 and R2 has 12.2 SXI3.
View 1 Replies
View Related
Nov 17, 2011
Ok on my new PC,,OS is windows xp..I works fine..connect to pppoe and can surf internet perfectly.But on my old pc,,it can only succesfully connect to wan miniport pppoe but cant surf the internet..its OS is Windows Vista home Prem.The old pc was my first pc(notebook) and last time I used it was on 2009..it was using Atheros AR8131 PCI-E Gigabit Ethernet Controller connection and I forgot what modem I used..but now I bought TP-link TD-W8901G and I use for ADSL connection.My new pc works fine because it was setup proffesionaly by my friend..it also still needs Atheros AR8131 PCI-E Gigabit Ethernet Controller connection to connect ADSL Wan Miniport PPPoE..but I repaired my old pc too late..and he didnt configured it..so I setup myself..all the PPPoE adsl connections.And so its succesfully connected to WAN miniport PPPoE..but I can surf the internet..The old pc also needs Atheros AR8131 PCI-E Gigabit Ethernet Controller connection for me to connect ADSL Wan Miniport PPPoE..but all that was succesfull.
View 6 Replies
View Related
Aug 14, 2011
How to successfully configure and connect to a DynDNS account with RVS4000? This was working fine for me until recently when I think I upgraded the firmware to 1.3.3.5.I am trying to connecting to DynDNS.org service. In the past, I used the following string for the Hostname which worked:'mysubdomain.domain.com&system=custom' (including small quotes)According to the RVS4000 documentation, all you should have to do is specify the host name with DynDNS but this clearly is not accurate.
View 2 Replies
View Related
Feb 23, 2011
I have successfully connected my vpn to my central point and 2 branches.My branch can see central and visa versaMy problem is that i can't see from my 1 branch the other branch.
My central has RVS4000 and my branches has WRV200.How can i be able to access from my branch1 PC, my branch2 PC and visa versa
View 1 Replies
View Related
