We would like to install a wireless network throughout the station. Currently we have a wired network with 15 PC's and are looking at obtaining tablets for our squads and apparatus. The station is quite large and is divided by the vehicle bays.I'm thinking that we will need multiple access points throughout the station. I am familiar with setting up one wireless router but not with multiple access points.
View 2 RepliesI have a Latitude D820, Windows XP, SP3. At my office I have a regular docking station but at home I have a D/Dock docking station. When I dock the 820 at home the Broadcomm network card works flawlessly. When I dock it in the office, it will occasionally work but most of the time the link light and data light on the docking station are on solidly and XP reports that the cable is unplugged. I have tried two different docking stations with identical results and also tested the cable by plugging it into the docking station that holds a D810. With the D810 it worked normally.
View 1 Replies View RelatedI have a Latitude D400 laptop with docking station. I left on a trip for a week and came back to find I cannot connect to the network through the docking station. I can however connect if I plug the ethernet cable directly into the laptop. Is this a hardware problem with the docking station?
View 3 Replies View RelatedI have a HP 6530b Laptop, and on-board Broadcom NetLink Gigabit Ethernet adapter.When I remove my laptop from the docking station, I obviously lose Network connectivity, however, when I replace the laptop back (or even just plug in a cable directly), I cannot reconnect to the network until I reboot.When I open Network and Sharing Center (Win7), and click change adapter settings the adapter is missing from the list (after i have removed laptop from docking station).
View 1 Replies View RelatedI was wondering if it is at all possible to set up a DIR-655 as a wireless base station for any router (specifically a netgear wrg614 v10). I've read that the DIR-655 can be set up as an access point, but with my current situation it's not currently possible.If this is not compatible with this specific netgear router, is there any other solution besides having to purchase a dedicated access point?
View 3 Replies View RelatedI have cable internet with a wireless router. My home computer/internet works fine My second computer connected via wireless was recently infected with a virus and I had to do a complete system restore. Since doing that, I cannot establish a connection. My computer can find the wireless connections and the wireless network connection shows enabled show that it but no IP address. If I repair, I get the error message "TCP/IP is not enabled". I tried enabling, reinstalling, I have tried every suggestion on this topic that I have found in other forums (running command, etc).
View 1 Replies View RelatedI need to install my wireless I need network key.
View 4 Replies View RelatedSamsung CY-WDCA7UT/ZA USB Central Station Dongle driver?
View 1 Replies View RelatedI had a W120N wireless router which received all internet radio stations with no problemsI have just acquired an E3000 and it appears to not pass through 2 particular internet stations that worked fine on the 120N What configuration parameters affect internet radio?Currently, I'm using all the same parameters from the 120N where possible.
View 4 Replies View RelatedZAMZOM downloads OK, as nearly as I can tell, but I always get "error 1001" when trying to install it.
View 3 Replies View RelatedI have a wireless set up at home and recently had to replace my DSL modem (due to my cat knocking over my coffee cup and spilling coffee on my old modem) I have managed to connect to the internet directly through the modem, but want to connect wireless. How can I connect my new modem to my old wireless network?
View 3 Replies View RelatedI have one AIR-WLC2125-K9 installed and controll 25 APs,
Now i want to add some APs, so i have asked my supplier and he propose to add an other AIR-WLC2125-K9, i will have all APs contrlled by 2 x AIR-WLC2125-K9.
How can i add the second controller to work with the first one?
-Region : Spain
-Model : TD-VG3631
-Hardware Version : V1
-Firmware Version : 0.6.0 1.0 v0001.0 Build 130108 Rel.54595n
I have a problem with the VoIP feature of this router:I configure the router as a sip station of a asterisk local PBX (192.168.1.254),To this point everything is fine, I can call with a asterisk sip station to a analog phone (sip station 100) that is conected to the FXE port of the TPLINK,The problem occurs when I want to call with the analog phone to a sip station. I have a dial plan with a 0 prefix to call stations using the sip acount:Profile Name Registrar Address Phone Number Status Remove Edit Prueba192.168.1.254100up.And when I call, I can see in the log the INVITE action.
I would like to use my new EA6500 as the base station and another wireless router with Wireless Repeating Function as a repeater. Is the EA6500 capable of that?? I have not found any documentation on that subject.
View 6 Replies View RelatedWe have been having issues with random packet drops and or some sort of radio lockup which happens a few times a day. I have a test AP setup with a few clients only a few feet away and I see this combination of messages. Should I be seeing these clients drop off and then reconnect immediately? Granted these test clients are not passing much data but my assumption is that they would not become deauthenticated because of lack of activity? This setup is using a radius server for authentication. I tested it before with just WPA2 PSK and only had a few disconnected over a number of days, compared with many a day with the Radius.
View 1 Replies View RelatedWe have 5 Cisco Aironet 1100 wireless access points and we are having huge problems in the last few days with them disconnecting some mobile barcode scanners that we have.
We have two Aironet's in the top of the factory which work fine and 3 down the bottom which keep kicking the barcode scanners off. If we use the barcode scanners at the top of the factory they work fine, as soon as we come down to the other 3 WAPs it they keep connecting and disconnecting.
We get the following error in the Event log on the access points.Disassociated because sending station is leaving (or has left) BSS On the barcode scanners. [code]
I am using a wireless connection via router to access internet at home. When my Dell Latitude E6510 Laptop is not on the Dell Docking Station and I'm using as just standalone I can access my wireless connection easily, no problem at all.However, when I attached my laptop to my Dell Docking Station, I can not access my wireless connection. The wireless connection is found, but when I click connect to network, I get "Windows cannot found network". When I remove the laptop from the docking station, I find the wireless connection and connect perfectly and it works normal.I am using Windows 7. I can connect to internet with straight wire going to docking station easily, but no wireless connection found when laptop is on the docking station. I work from home and use the docking station for two monitors for doing my job. I have struggle with this problem for two weeks now. I don't see anything on the docking station that's preventing me from access my wireless connection.
View 1 Replies View RelatedI recently inherited an old D630 laptop. I have just formatted the drive, and installed Windows XP (SP1, then upgraded to SP3) onto it. I have not been able to connect to my wireless network.I have downloaded and installed the drivers and installed in the recommended order. Issue is that I cannot get a dynamic IP address issued to me. It says I am on the network, but the only packets are outgoing. I have been trying to sort this for the last 2 days, and the laptop is close to being chucked out of the window.my wireless card is intel pro wireless 3945abg?
View 2 Replies View RelatedRegion : Spain
Model : TD-VG3631
Hardware Version : V1
Firmware Version : 0.6.0 1.0 v0001.0 Build 130108 Rel.54595n
ISP :
I have a problem with the VoIP feature of this router:I configure the router as a sip station of a asterisk local PBX (192.168.1.254),To this point everything is fine, I can call with a asterisk sip station to a analog phone (sip station 100) that is conected to the FXE port of the TPLINK,The problem occurs when I want to call with the analog phone to a sip station. I have a dial plan with a 0 prefix to call stations using the sip acount:Profile Name Registrar Address Phone Number Status Remove Edit Prueba192.168.1.254100up And when I call, I can see in the log the INVITE action :
32013-03-19 10:16:33OTHERDebugport 1 cx 0x3, evt/reason 3/0 buf (nil)
42013-03-19 10:16:01OTHERDebugport -1 cx 0x3, evt/reason 1/4 buf 0x4761a8
52013-03-19 10:16:01OTHERDebugthe initial INVITE request for [accIndex(0),callIndex(3) dest(<sip:103@192.168.1.254>)] is sen
But I�am sniffing traffic in the PBX and not received the invitation... Obviously the 103 station never recive the call...I think that maybe the INVITE is going out behind the WAN interface.... bug version?
Recently I have bought Dell Inspiron 15R-N5010 DOS based laptop and installed Windows 7 OS from the dealer's shop from where I have bought.
Problem is that I'm not able to access internet via Wireless connection (but with Wired connection can access internet).
url... that install broadcom driver i.e. broadcom_wlan_5603506 but still the problem is not solved(after installing broadcoam driver) and I cannot see wireless network adaptor in Network and Sharing(in Control Panel) only Realtek and Bluetooth PAN adaptor is there.I tried to install :
- R252544 (Dell Wireless WLAN 1520 Half MiniCard) gets following error "No compatible hardware found. The software you are attempting to install is not supported on this system. The software will not be installed."
- R252283 (Intel(R) WiFi Link 6200) gets following error "Software is not compatible with the OS"
- R247430 (Intel (R) WiMAX Link 6250) gets following error "Software is not compatible with the OS".
I tried to install in Compatible mode but getting failure error message (Windows 7 service pack is not installed).System details : Windows 7 OS - 32 Bit System, Windows 7 service pack is not installed. Serial Tag - < ADMIN NOTE : Service tag removed per privacy policy >
Queries:
- Which particular driver is required to be installed in Inspiron 15 R N5010 so that internet can be accessed via wireless connection?
- To install software in Compatible mode does Windows 7 service pack needs to be installed?If yes than which version?
- How can we check that Wireless driver is installed correctly ?
Just purchased new N750 model EA3500-NP and everything went ok until I tried to get my HP Laser Jet P2035n online. No go! It worked fine on the D-Link via Ethernet connection.
View 4 Replies View RelatedHow to install a wireless network in home environment?
View 6 Replies View RelatedI'm using an HP Elitebook 6930p with Windows XP and an HP EN488UT docking station. When I use the computer by itself the Network Connections shows "Local Area Connection 3 Connected Intel 83567LM Gigabit Network Connection" and I can connect to the internet. When I am in the docking station, I can also see this connection, as long as my notebok is open when I start up. However, if i start the computer with the lid closed (I just want to use the external monitor, not the notebook monitor) that network connection does not appear and I cannot connect to the intenet.
[code]....
Can I connect 2 or more wireless repeaters to the same wireless base station signal to extend wireless coverage? I.e. The base station is located in the centre of the building and the signal covers the middle but not the extreme end of the building. I would like to add a repeater on each opposite sides of the signal's reach so it covers the complete building. I can't use LAN cable and the building has different electricity supply to the 3 different part of the building so can't use the mains to carry the signal. Is this possible using wirless repeaters or do I have to use wireless bridge units to connect to the base station and then output with wireless access points attached to the bridge unit to extend the wirless signal?
View 6 Replies View Relatedwhat is a diskless station in networking
View 1 Replies View Relatedif the network i'm planning on will even work so i drew a picture on my project (attached). All cables will be gigabit compatible as will be the switches. The reason i will have 2 switches is because they won't be in the same building. The uppermost switch will be physically next to the router to enable me to have gigabit connection between the DiskStation and the PCs/HTPC without having to change my router (in fact can't change it due to special firmware for my internet TV).
View 4 Replies View RelatedI have the Air Station WHR-G300N. I just moved here from CA, I was on Verizon and now trying to use it on my girlfriend Cox system I can't get it to operate correctly.
Her PC system stopped having internet connection after about 2 weeks(running on the router) and going with Cox's reboot procedure of eliminating the router it can back up and seems to work fine as soon as I hook it back to the modem it stops.
I have unplugged all cables waited 30 seconds on both systems a couple of times. The lights are on the modem and the router.
I am trying to install ACS 5.0 on workstation, however once the install finsihes it reboots and I enter the Linux bash command line rather than the Cisco CLI.
Note - this is now fixed. I followed the steps here to install ACS 5.0 on VMware Workstation 7: url...
I recently re-installed Vista and while attempting to set up a wired network, I can't locate the wizard.I only need to set up two PCs. Is there a way to set up a network without it or is there a way to re-install the wizard.My service is Xfinity cable internet, a net gear router (5 port 10/100 Mbps FS605 v3).My pc is a HP s3700y 32-bit, the other is a dell running XP pro. I used to have these two networked when I was with Att, but with this new service I wanted to wipe the HP clean. Now I can't find the wizard, all equipment is operating properly.Have ran several checks.
View 14 Replies View RelatedI am blocked with the below doubt for my issue resolution. When a ethernet frame for eg:ARP Packet of minimum length (64 bytes) is received at the end station, will the L2 layer remove both FCS and extra padding bytes(18 padding bytes for ARP)? Or removal of the padding bytes is dependent on the implementation?
View 2 Replies View Relatedi have 10 stations, and i think one of them generated allot of traffic.maybe a virus sending spam.is there a command that can show my which station consume bandwidth?
View 3 Replies View RelatedIn ACS 5.3 radius authentication report I want to show the called-station-id attribute. (this was appearning on failed and passed auth in ACS 4.2). The value of called-station-id appears in the details. However, I want it to appear as a column with the report.
View 2 Replies View RelatedI want to connect from a Linux station to RV082, is it possible? What software can I use and with what configuration?
View 2 Replies View Related