HP 6530b - Unable To Re-connect To Network After Removing / Returning To Docking Station
Feb 28, 2011
I have a HP 6530b Laptop, and on-board Broadcom NetLink Gigabit Ethernet adapter.When I remove my laptop from the docking station, I obviously lose Network connectivity, however, when I replace the laptop back (or even just plug in a cable directly), I cannot reconnect to the network until I reboot.When I open Network and Sharing Center (Win7), and click change adapter settings the adapter is missing from the list (after i have removed laptop from docking station).
View 1 Replies
ADVERTISEMENT
Oct 26, 2011
I have a Latitude D820, Windows XP, SP3. At my office I have a regular docking station but at home I have a D/Dock docking station. When I dock the 820 at home the Broadcomm network card works flawlessly. When I dock it in the office, it will occasionally work but most of the time the link light and data light on the docking station are on solidly and XP reports that the cable is unplugged. I have tried two different docking stations with identical results and also tested the cable by plugging it into the docking station that holds a D810. With the D810 it worked normally.
View 1 Replies
View Related
Mar 14, 2004
I have a Latitude D400 laptop with docking station. I left on a trip for a week and came back to find I cannot connect to the network through the docking station. I can however connect if I plug the ethernet cable directly into the laptop. Is this a hardware problem with the docking station?
View 3 Replies
View Related
Aug 19, 2012
I'm using an HP Elitebook 6930p with Windows XP and an HP EN488UT docking station. When I use the computer by itself the Network Connections shows "Local Area Connection 3 Connected Intel 83567LM Gigabit Network Connection" and I can connect to the internet. When I am in the docking station, I can also see this connection, as long as my notebok is open when I start up. However, if i start the computer with the lid closed (I just want to use the external monitor, not the notebook monitor) that network connection does not appear and I cannot connect to the intenet.
[code]....
View 5 Replies
View Related
Mar 9, 2012
I am using a wireless connection via router to access internet at home. When my Dell Latitude E6510 Laptop is not on the Dell Docking Station and I'm using as just standalone I can access my wireless connection easily, no problem at all.However, when I attached my laptop to my Dell Docking Station, I can not access my wireless connection. The wireless connection is found, but when I click connect to network, I get "Windows cannot found network". When I remove the laptop from the docking station, I find the wireless connection and connect perfectly and it works normal.I am using Windows 7. I can connect to internet with straight wire going to docking station easily, but no wireless connection found when laptop is on the docking station. I work from home and use the docking station for two monitors for doing my job. I have struggle with this problem for two weeks now. I don't see anything on the docking station that's preventing me from access my wireless connection.
View 1 Replies
View Related
Mar 25, 2012
I cannot utilize my Ethernet connection when my Dell Latitude D630 is connected to a docking station. I have tried this on two different docking stations. I also have another Dell laptop that I have used in the one of the same docking stations and the ethernet connection is fine. I'm looking for assistance to troubleshoot this (even just determining if I can replace the connector and how I determine what type I need)
View 3 Replies
View Related
Sep 27, 2011
After getting virus and cleaning the system as requested, including all of the registry items not required, I have been unable to get onto the internet.Bad Image Error.I have a Mesh PC, running XP SP3.The motherboard is MS-7207 ver2.I've tried reinstalling the ethenet drivers but to no avail.I can see the network adapter in the control panel and it says the drivers are installed OK.The green light comes on when the cable is plugged in but not the yellow data lamp.I have a second hard drive from an old PC that I reinstalled windows on booted from, I updated the drivers and successfully connected to the internet, which proves all the hardware and drivers do work, but just not on my main hard drive containing my proper windows install.I'm logging this fault on my work laptop as its the only way I can get on line. (My work laptop works at home over the same broadband connection I have used previously.
View 19 Replies
View Related
Dec 19, 2011
My computer was recently infected with the XP Antivirus 2012 rogue virus. I believe that it has been removed from my computer, but I am unable to connect to the internet. I am unable to obtain an IP address. The IP address is 00000 and the Submask is 0000. My operating system is Windows XP and I am using a High speed cable connection
View 5 Replies
View Related
May 1, 2012
We would like to install a wireless network throughout the station. Currently we have a wired network with 15 PC's and are looking at obtaining tablets for our squads and apparatus. The station is quite large and is divided by the vehicle bays.I'm thinking that we will need multiple access points throughout the station. I am familiar with setting up one wireless router but not with multiple access points.
View 2 Replies
View Related
Oct 6, 2010
I want to connect from a Linux station to RV082, is it possible? What software can I use and with what configuration?
View 2 Replies
View Related
Sep 11, 2011
I'm donating a computer that was in my office network but would like to delete the office network. How do I do it?
View 2 Replies
View Related
May 21, 2012
We have a home network setup. My HP Pavilion AMD Athlon 64 laptop running Vista, shares the printer with an older desktop, AMD Athlon 1600 XP. The printer is hooked up to the older computer that I am getting rid of. I assume I will have to install the software for the printer onto my laptop so I can use it. Is there anything else I should do? Other than removing all the files etc off the old computer.
View 3 Replies
View Related
May 5, 2011
yellow shield on network sign especially wireless network
View 2 Replies
View Related
Jan 25, 2012
I accidentally created a home network and want to remove it, as it blocks all my wireless devices.
I have a dir655 with 2.o firmware
Os on computer I set it up on is win 7 64 bit
How to make other wireless devices easily recognize it? when I try to access it the wireless computers ask me for code that I entered on setup that was printed on bottom of router but system doesn't recognize it.
View 1 Replies
View Related
Jun 16, 2013
I am using the Vostro 3360 with win 7, I did used the hotspot station software accomplish with the WiFi driver before and worked fine. However, the hotspot is not working as the ipv4 is showing 'no internet connect'. And my iPhone cannot connect it too.
View 1 Replies
View Related
Sep 1, 2011
I have 2 servers. 1 is a terminal server windows 2003 sb terminal server.(working fine) and the other is server 2003 small business DC configured with dhcp, dns, SQL, & wins. Last week one of the network programs that is located on the DC started refusing connections.So doing some trouble shooting I noticed that when I ping the server name I get a local address of *.*.*.42 when the address the machine is assigned is *.*.*.5. When I do an Ipconfig /all on the DC it only shows the *.*.*.5 number. I look in DHCP and *.*.*.5 is reserved for the DC Computer. And the *.*.*.42 isn't even in the address leases. I have also looked through the DNS settings and see no alias with the .42 number. And the number does not show up in the reverse lookup zone either.
View 5 Replies
View Related
Feb 4, 2012
1) I had Windows XP 2012 Security virus that I removed. The antivirus software also removed afs.sys and afs.reg file, that I repalced from backup. I also copied and merged afs.reg Doing this got me an ipaddress for my PC.
2) I can not connect my wired desktop to the Internet. I can ping the ip address of google.com but not the url. I can also not ping ip address of netgear.com. My laptop has no problem connecting to the wireless network.
3) I ran Winsockxpfix and flushed dns and no luck. [code]
View 8 Replies
View Related
Sep 27, 2011
I have two offices - see attached diagram. They use 192.168.0.0/16 for private IP addreses.They're connected via site-to-site VPN. Mostly works well, except some traffic doesn't return and I think it's due to NAT?When a workstation in remote office tries to access web servers in the local office which using private IP addresses (e.g. .64.40), traffic never returns. The web servers in question are also accessible publically - the Cisco 1801 in local office has a static route:
Local1801# ip nat inside source static tcp 192.168.64.40 80 111.111.111.2 80 extendable
The problem seems to be with the local 1801 router. tcpdump confirms that return traffic exits out of ods1's external interface and tcpdump confirms that traffic does not come into remote workstation's interface (neither with .64.40 as source IP nor 111.111.111.2 as source IP)
Remote887# show ip nat translations - none.
Local1801# show ip nat translations
Pro Inside global Inside local Outside local Outside global
tcp 111.111.111.2:80 192.168.64.40:80 192.168.10.254:54990 192.168.10.254:54990
What I don't understand is why a nat translation entry is created. My understanding is that it should only happen when ip packets are sent to 111.111.111.2:80 I don't see that any packets would be sent to this IP address when accessing the site across the VPN - in fact the VPN peer address used is not this one.I cannot figure out why on earth this website cannot be accessed via private IP. I have tried clear ip nat translation * on both routers with no luck.
Relevant Cisco config snippets included below:
Local1801 VPN and NAT config
------------------------------------------
crypto map VPN-MAP 1 ipsec-isakmp
description "Local-Remote VPN"
set peer 222.222.222.222
set transform-set VPN-TRAFFIC
match address 101
[code]....
View 3 Replies
View Related
Apr 2, 2012
My internet link is connected on Internet Router & below downwards Cisco ASA 5520 is connected.ASA is connected with core switch cisco 4510 on downwards. our web based mail [URL] is hosted outside.
Lets suppose ISP pool is 4.4.4.0/28.suppose owa server is Static natted on ASA with 4.4.4.4. my machine traffic is going to internet with same ISP with PAT on Cisco ASA & internet is working on my machine. if i want to access {URL} or ip base for mail access, its not working & also it is not pinging. i suppose to ASA is blocking for returning traffic.
is there any way to traffic will go via same Firewall & comeback on same firewall port?
View 1 Replies
View Related
Jan 10, 2012
How do I automatically turn off Wi-Fi when docking Laptop
View 1 Replies
View Related
Feb 27, 2012
All the other switches / routers on quering for SNMP sysName.0 returns their FQDN in our network. The Nexus 7010 and 5020 switches in the network return only their name. "hostname xx" and "ip domain-name xx" defined on all the devices. The SNMP MIB is matching. There are no other SNMP related issues. How can I get the FQDN for these devices ?
$ snmpget -v 2c -c public m-65k-00.core sysName.0
SNMPv2-MIB::sysName.0 = STRING: m-65k-00.core.abcd.com
$ snmpget -v 2c -c public m-N7K-00.core sysName.0
[Code].....
View 4 Replies
View Related
Nov 12, 2011
My home computer accesses the Internet through an ADSL modem and a phone line. I added a wired router (Linksys BEFSR41).I've since bought a laptop computer, an iPhone4 and a wireless router (Linksys WRT160N).Again, on the advice of a friend, I ADDED the wireless router, so now have two routers connected.The devices are connected as follows:
-Wall jack to ADSL modem
-ADSL modem to BEFSR41
-BEFSR41 to WRT160N
-WRT160N to desktop computer.
As I understand Linksys routers, the default IP address for ALL Linksys routers is 192.168.1.1.Both the iPhone4 and the laptop are unable to connect to the wireless router.I'm assuming the two routers are conflicting with each other, so I thought I would remove the wired router..Can I change the IP address of the BEFSR41 router from 192.168.1.2?
Would this resolve the conflict between the two routers and allow the wireless devices to "see" the wireless router? What's the correct procedure for removing the BEFSR41 router from the system?
View 6 Replies
View Related
Aug 6, 2011
My pc is windows 7ultimate and my laptop is vista ultimate. the router is connecting fine to the pc. as i try to connect to the laptop it keeps saying unidentified network and local access only. i tired different things but nothing seems to work. it will work only when there is no password on the wireless.
View 3 Replies
View Related
Feb 14, 2011
I had to go onto a website last night called "Audible" because I have a payment on my credit card showing and I wanted to know what it was. My pop up browser warned me that the site may contain harmful content but I had to proceed to be able to find out what I was being charged for. I accessed the site via an email. I have tried to open up my laptop this morning and a sign popped up saying a corrupt file had changed my homepage. I cannot click on it to set is as my default. I cannot connect to the internet either, when I click on network places and highlight my usual one it comes up with a message "This is taking longer than usual".
View 1 Replies
View Related
May 19, 2012
I've recently reinstalled a fresh windows xp operating system onto an old laptop. I've been through some trouble getting the drivers installed, but now I've finally completed that.[URL] I cannot connect to my home's WEP secured wireless network to which I have the password. After I followed the steps detailed in the link, instead of saying "detecting network type," the loading bar says "waiting for the network..." and after about 30 seconds, it disappears and nothing happens.I can connect to my router by directly connecting it with an Ethernet cord without a problem. And I know that the laptop is capable of connecting to a wireless network. I was able to connect to a nearby neighbors unsecured wifi, however it was with a very slow connection due to the distance and weak signal. It will just not connect to my own.
View 14 Replies
View Related
Apr 15, 2011
I have a netgear n300 WNR2000 v.2 router (which has the latest fireware as of today) and have connected to it both wirelessly and wired with my netbook. My netbook runs windows xp with sp3 and has all the lastest updates. My 2 pc's on the network are both wired and running windows 7 (both up to date with updates). I had no connectivity issues with any computers on any network ever until I got the pc's with windows 7. The 2 pc's see each other fine and they have zero issues as far as networking goes. Neither pc will interact with the xp netbook, and the netbook will not interact with either pc. I installed the LLTD on the netbook, which did allow the computers to "see" each other on the network maps. However, the computers still do not interact and say they are not on the network, even when trying to use the icon provided from the map to connect. In command prompts, all pc's and the netbook are able to ping each other with ip addresses. Only the windows 7 pcs are able to ping using net names though. When locating via "net view 192.168...", all the computers see each other and even display the appropriate names for the computers. However, using "net view pcname...", again nothing.I have selected netbios over tcp/ip, made sure the workgroup names match on all computers. The "net names" command showed no names saved in the cache.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsRyan H*****>nbtstat -n
Wireless Network Connection:
Node IpAddress: [192.168.1.4] Scope Id: []
[code]....
View 3 Replies
View Related
Oct 24, 2012
So I'm currently running window 7 on my msi GT683-R. As of yesterday my internet stopped working, however only on my msi. I'm currently typing this on a borrowed mac using the same network that doesn't work on the other device. It also works on my iPhone. The problem is, neither the wifi nor the wired works on my MSI. I made sure DHCP was on, ran a TCP/IP stack reset, a winsock reset, have restarted my computer/router multiple times, and disabled bonjour but nothing seems to work.
View 6 Replies
View Related
Jun 11, 2011
I just loaded up my machine with Windows Vista Home Basic and wanted to connect my another laptop to it via Wireless AdHoc network. I created a wireless adhoc network from the network and sharing center. But was unable to connect the other laptop to it. Everything is ok. My WLAN is on, drivers are also latest.[code]
View 4 Replies
View Related
May 3, 2011
I have a BT homehub V2, I have 2 computers connected via cable, a laptop wireless an iPhone wireless and an iPod touch wireless. The cabled computer is not connecting and neither is the iPod touch, but the iPhone seems to be, as I did a speed test on it, which is giving my usual speed result. I don't no if the laptop is connecting as it's my daughters and I dare not go near it, It does not make sense to me that the iPhone is still connecting. The speed result was around 7mps
View 2 Replies
View Related
Dec 25, 2012
Moved into a new place recently, internet has been working fine until earlier today I closed my laptop and went to make something to eat. When I came back and turned my computer back on, it keeps giving me this message when I try to connect. It doesnt ask for a password, it simply tries to connect for a few seconds before giving up. After waiting a few hours for the problem to fix itself, one of my flatmates got home and told me they are having the same issue. I have tried restarting my computer, turning off my firewall and restarting the modem.
View 2 Replies
View Related
Nov 11, 2012
My son's laptop suddenly stopped being able to connect to the internet via wireless. I can see it okay but just unable to connect. I've checked the drivers and they are up to date. It shows on my network when wired and I've checked with the virus software and I can see no reason for it to be blocked.
View 11 Replies
View Related
Nov 25, 2012
i cannot connect to a certain wireless network. The router can take upto 4 laptops and this one will be the third so itis not a question of to many.All the other laptops can conect to the router when the pass key is put in but this computer will not. This computer will connect to other networks but not the one at home. When i put the pass key that it asks into the computer it says that it is not the right one. What am i doing wrong or is there something missing from the computer. Not very experienced at this so be patient and spell it out in laymen terms
View 1 Replies
View Related
Nov 19, 2011
I bought a brand new psp today and was trying for last 2 hours to connect it to my wireless network but each time it display an error code 8041160B. I called my internet service provide and we changed the WEP key but i am still getting the same error code. One weired thing I noticed that psp shows only 8 digit WEP key while my key is 10 digit. I don't know why psp doesn't show the 10 digit key. Also, the same issue happend 6 months ago and i was told psp network is closed as people ids have been stolen so i returned my psp and it seems i will have to return it again.
View 1 Replies
View Related
