Cisco Routers :: Set Up Synology VPN Server Through RV220W / Cannot Get A Windows 7
Jan 12, 2013
I am trying to set up a Synology VPN server thru a cisco RV220W and cannot get a windows 7 VPN client to connect to it. Access rule was created on RV220W to port forward 1723 and also made sure the same port was forwarded on the built in router on the Synology NAS box, running DSM4.1 and made sure VPN server was up and running. IP address of synology NAS is 192.168.1.250, mask of 255.255.255.0. DNSgateway is 192.168.1.1. Only running PPTP at this time.
When I run the windows 7 VPN client, I try to connect to the external internet addres:1723, make surePPTP is the only protocol and use a DNS of 192.168.1.1. When I try connect, I get an 868 error which says "error 868: The remote connection was not made because the name of the remote access server could not resolve."
When I try to ping port 1723, I do not get a response which leads me to believe that the issue is the router and not the NAS box. HTTP, HTTPS and FTP ports work fine.
View 6 Replies
ADVERTISEMENT
Jan 20, 2013
Having a hard time hosting my email service on my DS212J. To be I honest, I have no idea where to start.
Info:
IP Address using Synology DDNS: example.synology.me
Domain: example.ca
View 6 Replies
View Related
Aug 16, 2011
I have a Server 2008 server and a Synology DS1511+ Nas.The goal is to make an iSCSI connection from the Synology to the Server 2008 server. However, I am having an issue. I set this all up two weeks ago. For two weeks it was all running fine. Now, my iSCSI drive is dropping daily. And everytime I go into the iSCSI initiator and click anything, the server still allows me to do some things, but it basically locks up. I can't restart, services stop responding, etc... The only was I can break it out of that is a hard reset. Why iSCSI initiator keeps taking down my entire server to the point of hard restart? Once this is solved, I bet the iSCSI dropping daily will be solved as well. I have already talked with Synology, the log is producing nothing and they are suspicious that it has been running fine the past two weeks. Windows update is off (I manually do it during scheduled maintenance), and there is no av or firewall running, so rule those out.
View 8 Replies
View Related
May 15, 2011
I'm relatively new to establishing VPN connections and I'm having one heck of a time getting everything configured.I'm setting up a RV220W at the office and trying to get VPN steup. I've have gotten Quick VPN connections working using the QuickVPN software. I've given up for now on IPsec VPN connactions and will come back to these later.What I'd like to get setup is the SSL VPN connections using the Win7 built in VPN client. Is this even possible? I initially tried to connect to the VPN via the SSL Web access but I cannot get the software/divers to install on any of the 3+ Win7 64 bit machines I tried.So can the SSL VPN on the RV220W be setup to connect to with the Win7 VPN Client using SSTP?
View 6 Replies
View Related
May 5, 2012
I possess a RV220W (firmware 1.0.3.5) but I can't seem to work with the PPTP server on one VLAN only.
My default VLAN is in 192.168.1.1/24. I created a VLAN ID 10 in 192.168.50.1/24 inter-vlan routing : disabled and Device Management : disabled. (Menu Networking > LAN > VLAN Membership and Multiple VLAN Subnets).
Then I configured a PPTP server on the IP range 192.168.50.200 to 192.168.50.210.
To finish I created my user. (Menu VPN > IPSEC > VPN Users).
The PPTP tunnel is working, but on all my local network and not only the VLAN ID 10.
View 3 Replies
View Related
Mar 9, 2012
I'm having problems connecting to the VPN. I can access the web portal, but cannot connect SSL VPN on my Mac 10.7, or a virtual windows 7 machines. I've read a lot of forum posts about the mac problem, but for some reason the Windows 7 machine won't connect SSL VPN on windows 7 x64, Chrome, FIreFox.
I tried downloading QuickVPN and set up a user account, but it just sits on the machine at the "Connecting" screen. My primary users will be running Windows 7 Professional x64.
View 1 Replies
View Related
Apr 22, 2013
In my last thread I had difficulties setting up access to my FTP server through the RV220W router. After getting it to work, I faced a new issue of reduced upload speed. 240ish KB/S which is obviously ridiculously slow. After much toying around, I finally got it to work again, after doing a factory reset of the router. But today when I wanted to upload to my friends NAS, I suddenly am faced with reduced speeds yet again(400KB/S)! settings, with one firewall rule added, to allow access to my FTP. Other than that, I also enabled jumbo frames....so I tried disabling that again. But that did nothing. Also tried disabling every firewall feature under "attack prevention" but, didn't seem to work either.I didn't reboot the router with each change, as that would make things take a lot longer....and didn't think it should be necessary?
I'm starting to get more and more tired of using my RV220W....seems slow and buggy..when I do a online speedtest, I get a 30Mb/30Mb down/upload rating, which matches the rating I pay my ISP for.... And I have a fiber connection.
View 5 Replies
View Related
Oct 9, 2012
I try to connect to RV220W with windows 7 client but I fail : error 789. I compare again and again pre shared key, but it doesn't change anything. How to connect to RV220W with IPsec client ?
View 4 Replies
View Related
Dec 12, 2011
get a status on Mac Lion and/or Windows 7 64-bit SSL VPN support for the RV220W? QuickVPN (for Windows 7 64-bit users) and IPSecuritas (for Mac Lion users) are our current workarounds, but for folks that use/own their own equipment we prefer SSL VPN. This is why we retired our WRVS4400N v2 for the RV220W.
View 3 Replies
View Related
Mar 28, 2012
I was trying to set a DHCP pool with 127.16.0.0/16 with RV220W, however, RV220W UI can't save it. It displays "IP Address Range -"Step to reproduce: (it is 100% reproducible)
1. login into RV220W admin web
2. Create a VLAN, id 201
3. Go to "Multiple VLAN subnets", select the VLAN, click edit
4. Enter following info:
IP Address: 172.16.0.1
Subnet Mask: 255.255.0.0
DHCP Mode: DHCP Server
Domain Name: Cisco
Starting IP Address: 172.16.2.100
Ending IP Address: 172.16.10.254
Primary DNS Server: 172.16.0.1
Leave rest of settings with default value.
DNS proxy is enabled
5. Press Save button. The UI shows text "IP Address Range -".
Expected result: RV220W shall save the setting and make use of 172.16.0.0 subnet in IP pool. By the way, the error message "IP Address Range -" seems incompleteI tried same setting on netgear FVS318N (very similar settings to RV220W), it accepts 172.16.0.0/16 as DHCP IP pool and works.RV220W has great feature set meets my needs. Its UI is slow and sometime dashboard freezes, which I can live with comparing to features. But DHCP server IP pool can't be class B is huge limitation to me.
View 1 Replies
View Related
Mar 10, 2013
Whether the wireless print server (F1UP0002au) operates under windows 7 and windows 8?
View 1 Replies
View Related
Jul 5, 2012
I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
View 2 Replies
View Related
May 24, 2011
I am using RV220w router firmware 1.0.1.0
I can connect to the SSL VPN server using XP,windows 7 and window 2003 all 32bit stack 1. When I go to use windows 7 Prof. 64 bit IE v8 it will not connect. I dont even get where the laucher install. I get the error Please enable active X or make sure your site is trusted. All of this has been set yet it will not work. I also get the following error
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729)Timestamp: Wed, 25 May 2011 18:00:28 UTC
Message: Object required: 'VPLaunch1'Line: 212Char: 1Code: 0URI: [URL]
the source code is ref. line 212
}
View 1 Replies
View Related
Nov 20, 2012
I replaced a similar router from a competing company with the AC900 N900 router. I open Live Mail (IMAP) and keep it open during the day. Since switching over, when I periodically look at email on Live Mail, I frequently get a "Windows Live Mail" message saying "Your server unexpectedly terminated the connection. Possible causes for this include server problems, network problems, or a long period of inactivity." I have never received this message from either one of the previous routers - LinkSys, Netgear.
View 7 Replies
View Related
Mar 21, 2012
I have set up our network with an RV220W as gateway/Wifi-AP,VPN host.I am able to connect over the WWW with the windows 7 client laptops no problem, BUT ,I cannot from my office reach out to the laptops, it seems as if the tunnel is one way.The users can do anything they need, but I want to be able to connect to them to update their AVG or render remote assistance etc.Ping from client to home network no problem.Client laptop is invisible to any ping etc FROM the home network.
View 2 Replies
View Related
Aug 21, 2011
I just recently installed a RV220W at my office and (almost) everything works fine. I have noticed that when my iPhone is connected to the RV220 wi-fi network, I get the message "The connection to the server failed" when checking my email. If I disable the wireless on my iPhone, it connects up to the exchange server perfectly fine so it must be a setting with the wireless somewhere but I cannot find it anywhere.....
View 1 Replies
View Related
Mar 16, 2013
Kinda narrowed it down to the ds1512+ to replace a whs2011 (that was made from a hp media server). No rush. Just upgrading. What is the refresh cycle? I can wait until the new servers come out.
I'm not smart or dedicated enough to build a box from scratch. I just want it to work neatly.
View 10 Replies
View Related
Aug 22, 2011
I bought a Synology DS411 slim NAS which I want to access remotely. I made a DNS and did portforward in my router (Cisco by Linksys WRT160N v2. The problem is I am part of a bigger scientists network where all ports are closed so it wont work. I even tried installing a OpenVPN server on the NAS and then connect though that but with no luck.
View 3 Replies
View Related
Jun 29, 2012
I have a Synology DS 710.And I would like to set it up so i can access it from any where within my network. But also be able to access remotely either by my Iphone and my MAcbook pro.
I tried setting up a VPN but I find that I would get the basic setup done on my 710 and my mac. but my mac can not connect. Also find that I would need a password but not sure where I would create/find a password.
View 1 Replies
View Related
Apr 2, 2012
what exactly is QuickVPN?Is it a IPSec VPN?Is it a PPTP?Is it a SSLVPN?can I resolve my local hostnames? That means, can I configure a lokal DNS Server?
View 3 Replies
View Related
Aug 24, 2012
I am trying to setup and configure a VPN on the RV220W that uses IPSEC so I can use the Cisco VPN Client I use at work, I have gone through the user manual 11 or 12 times now but still cannot work it out. I cannot find where on the Rv200W iset up the phase 1 authentication username and password which will then lead me onto the phase 2 stage of asking for a username password to allow me access.
View 8 Replies
View Related
Jul 3, 2012
Picked up a pair of RV220W's for a project I'm working on. I have several IP's available, 4 of which are assigned to/in use by a server behind the RV220W. All 4 of these IP's are static external IPs. How I can configure the RV220W so that requests to those 4 IP's get routed to the server.
Prior to purchasing this, I was under the impression what I was trying to do was called one-to-one NAT, but after reading the 'Help' document on the one-to-one NAT page, I don't think this is right. Emphasis added below: Cisco RV220W Wireless-N Network Security Firewall Help FirewallOne-to-One NATOne-to-one NAT is a way to make systems behind a firewall and configured with private IP addresses appear to have public IP addresses.One-to-One-NAT Rule TableThis table lists the list of available One-To-One NAT rules configured by the user. Private Range Begin: start ip address in private (LAN) ip addressPublic Range Begin: start ip address in the public ip address (WAN IP), Public IP Subnet Mask: The Subnet Mask of the public IPRange Length: Range length maps one to one private address to public address up to the given range.Service: This column shows service to be accepted by LAN Host.The actions that can be taken on One-to-One-NAT rules are:(Check Box At First Column Header): Selects all the entries in the table.Add: Opens the One-To-One NAT Configuration page, to add a new entry. Edit: Opens the One-To-One NAT Configuration page, to edit the selected entry.Delete: Deletes the selected entries.
So according to their documentation, the server in question would need to be configured with a private IP. Unfortunately, one of the applications I use is licensed via IP address and my understanding is that I cannot use the software with private/non-routable IP addresses.
Is the RV220W capable of not only securing the line (firewall, access rules, content filtering, port trigering & forwarding etc) but also doing what I was hoping to do (keeping the external IP's on the server, and routing appropriately)?
View 9 Replies
View Related
May 15, 2012
I'm using a RV220W router, and recently got shifted to a dynamic IP solution.Now, I've got a no-ip.org address, but the update service seems to be on no-ip.com. So, I try to enter mydomain.no-ip.org OR mydomain.no-ip.com in the dynamic dns settings, under Host and Domain Name, but when saving the settings it says
'The hostname specified does not exist in this user account' ,which seems to indicate that it manages to login to the update service but gets a negative reply.Is it possible to use the RV220W with no-ip.org/com?
View 5 Replies
View Related
Dec 12, 2012
We have 2 sites connected thru 2 RV220W routers via VPN and most things are working fine. I have noticed however, that any device that has a web interface, i.e. our Sharp Copier and our Freenas server, is inaccessible. The page tries to come up but then I get the Cisco "server is down" page generated by the RV220W.
I can pull up the web interface pages if I use a machine on the local LAN but not on any machine across the VPN. The only commonality I can think of is the RV220W blocking that traffic for some reason..
View 8 Replies
View Related
Sep 28, 2011
Cisco support write down manual (workaround), how to setup IPsec VPN connection on Mac OS 1.7?
View 5 Replies
View Related
Nov 27, 2011
Is there anyway to associate a name to an IP in the RV220W? I am coming from a WRVS4400N v2. Folks are complaining that they can't connect, for example via Real VNC, via the PC name any longer. They have to use the IP address. In the past I put the names of the PCs in the WRVS4400N when I reserved IPs via MAC addresses (some call this assigning static IPs). There isn't any place in the RV220W to put the name. Even when I look at the DHCP list a lot of them show up as "unknown". I am sure this is a NETBIOS thing but I'd rather fix this in the router as I have always done in the past.
View 4 Replies
View Related
Jul 22, 2011
i have a RV220W and absolutely nothings functional on this stupid Router, no NAT , no Port Forwarding and I cant access my Network from Outside. Any firmware link for downloading. This address works, its handling special webrequest.
View 1 Replies
View Related
Jul 19, 2012
I set up a PPTP VPN with an RV220W recently. It was working flawlessly until a recent power outage and now users are getting the 807 error when attempting to connect. I have PPTP passthrough enabled and TCP/UDP 1723 open. As far as I can tell GRE 47 is open as well. Why it was working and is not working after a power outage?
View 2 Replies
View Related
Jun 23, 2012
Having a strange problem that just started this week and got worse this evening. I have a RV220W that is feeding my network. The RV220W sits behind a broadband modem and acts as the DHCP for the network and those computers access the internet that way. Anyway, tonight started an issue where the the RV220W just disappears. Becomes unpingable. I recycle power, and within anywhere from 5 to 10 minutes, it's gone. No longer pingable. Even if I plug a latop directly into it.If I power cycle the RV220W it comes back and I can ping it and access it and its settings. 5 to 10 mins later, I again lose it. Nothing was done. Its been working fine for a few weeks. Had a similar outage last Tuesday, but a recycle of everything brought everything back into line. After I lose connection to it, the lights I expect to be lit remain lit.
View 1 Replies
View Related
May 3, 2013
Region : UnitedKingdom
Model : TD-W8970
Hardware Version : V1
Firmware Version : 0.6.0 2.1 v000c.0 Build 130415 Rel.34164n
ISP : plusnet
I have setup 2 vpn tunnels from my TD-W8970 to places that use TD-8960N (Firmware Version: 1.4.0 Build 110921 Rel.17774n Hardware Version: TD-W8960N v3 0x00000002 )and I can ping and connect to any ip used at their end but they can only ping 192.168.1.1 which is my router and not 192.168.1.104 which is my Synology DS212J that they need to access.
Both tunnels are similarly configured:
Tunnel 1 on my TD-W8970
IPSec Connection Name: Tony1
Remote IPSec Gateway Address(URL): 89.240.xx.xx
Tunnel access from local IP addresses: Subnet
IP Address for VPN: 192.168.1.0
IP Subnetmask:255.255.255.0
[URL]
View 1 Replies
View Related
Mar 23, 2013
I've just bought a Synology DiskStation DS412+ and put 2 x 3TB Western Digital Red drives in it, set up in RAID 0. It's currently plugged in to my gigabit Netgear switch.I created a user with full permissions on the NAS, created a share, mapped a drive on my Windows 7 PC (also gigabit ethernet) and tried copying some files, but I'm getting painfully slow transfer speeds (< 40KB/s - yes, kilobytes, it's not a typo!
Does anyone have any ideas why it'd be so slow? There's loads of reports online of people getting > 80MB/s from this NAS.
I've copied files from this PC to my MacBook Pro in the past and got decent enough speeds so it shouldn't be an issue with the NIC on this PC, or (hopefully) the Netgear switch it's going through.
View 1 Replies
View Related
Jan 26, 2012
I am unable to make UPnP to work on the RV220W. I am forced to use port forwarding.
View 10 Replies
View Related
Nov 20, 2012
Nothing happens when clicking the SAVE button after making changes on the VLAN Membership screen when using IE9, but it work fine with IE8. Any problems using IE9 during configuration?
View 4 Replies
View Related
