Synology DS1511 NAS / ISCSI Initiator Crashing Server 2008?
Aug 16, 2011
I have a Server 2008 server and a Synology DS1511+ Nas.The goal is to make an iSCSI connection from the Synology to the Server 2008 server. However, I am having an issue. I set this all up two weeks ago. For two weeks it was all running fine. Now, my iSCSI drive is dropping daily. And everytime I go into the iSCSI initiator and click anything, the server still allows me to do some things, but it basically locks up. I can't restart, services stop responding, etc... The only was I can break it out of that is a hard reset. Why iSCSI initiator keeps taking down my entire server to the point of hard restart? Once this is solved, I bet the iSCSI dropping daily will be solved as well. I have already talked with Synology, the log is producing nothing and they are suspicious that it has been running fine the past two weeks. Windows update is off (I manually do it during scheduled maintenance), and there is no av or firewall running, so rule those out.
View 8 Replies
ADVERTISEMENT
Jan 20, 2013
Having a hard time hosting my email service on my DS212J. To be I honest, I have no idea where to start.
Info:
IP Address using Synology DDNS: example.synology.me
Domain: example.ca
View 6 Replies
View Related
Jan 12, 2013
I am trying to set up a Synology VPN server thru a cisco RV220W and cannot get a windows 7 VPN client to connect to it. Access rule was created on RV220W to port forward 1723 and also made sure the same port was forwarded on the built in router on the Synology NAS box, running DSM4.1 and made sure VPN server was up and running. IP address of synology NAS is 192.168.1.250, mask of 255.255.255.0. DNSgateway is 192.168.1.1. Only running PPTP at this time.
When I run the windows 7 VPN client, I try to connect to the external internet addres:1723, make surePPTP is the only protocol and use a DNS of 192.168.1.1. When I try connect, I get an 868 error which says "error 868: The remote connection was not made because the name of the remote access server could not resolve."
When I try to ping port 1723, I do not get a response which leads me to believe that the issue is the router and not the NAS box. HTTP, HTTPS and FTP ports work fine.
View 6 Replies
View Related
Dec 27, 2012
We are using Cisco ACS server Version : 5.3.0.40.6. Our tacacs appliances are crashing on AD authentication on a fairly regular basis. I have been searching Cisco.com to see whether we are on the latest version or not however I couldn't find anything lattest than what we are currently using. Are we on the latest version?
View 1 Replies
View Related
May 6, 2012
[code]...
I am able to obtain IP addresses through the DHCP server for my clients and I am able to browse internet on the server 2k8.Server 2008 - Share Internet through DHCP server
View 10 Replies
View Related
Feb 11, 2011
I have install the administration toolpack on Windows 7 and enabled remote connections on my server 2008 box, When i try and connect with my Windows 7 server manager it does not work.I see stuff on google about enabling a trustedhost with winrm but can't find a way to do this.
View 18 Replies
View Related
Dec 14, 2010
I've been reading that the Windows Server Backup that is included with Server 08 R2 is pretty good. Is spending $400 on a third party utility worth it?
I'm asking because we're purchasing a new server soon and I want to know if the included backup is going to be good enough. Will be backing up server state as well as data to tape and possibly an off site server (server 2003) if I get my way.
View 19 Replies
View Related
Mar 7, 2013
I am running a small network of 30 pc. I have installed windows server 2003. Now i want to upgrade it to server 2008 but before that i want to test windows server 2008. That is why i,m looking online for a copy of windows server 2008 with reg key. Is there any good and trusted place to get windows server 2008.
View 1 Replies
View Related
Feb 26, 2013
So as far as I can tell our server is not running any AV whatsoever, so I'm buying Kaspersky Small Business with the 10 PC package:Kaspersky Small Office Security | Virus Protection | Kaspersky Lab to install on it and our other PCs, and I was wondering if there's anything I need to know about installing AV on a server.
View 19 Replies
View Related
Aug 13, 2012
I have a dedicated windows server 2008 r2 enterprise.I am running an SSTP VPN but only have 2 IP address to connect to the internet on.My issue is that one of the IPs is for the IIS7 etc and the other is for VPN use.How can I apply the same IP to more than one user allowing them to connect all at one.There are in total about 5 users who want to use the VPN service and I dont really want to pay.How do I apply the same IP to all accounts and allow them to connect and all use the same IP at once.
View 5 Replies
View Related
Jul 22, 2012
Still trying to get this XP pro SP3 to connect to or log into the server, a Windows 2008 jobber. I get the pop up that says unable to access the server, may be a permissions issue. I am administrator on both though and it should not be an issue plus I can ping each machine from the other. The XP machine does not show up in the network on the server though. The server shows up on the XP but then will not allow me to log into it. I changed all user names and pass codes on all the machines to be the same and it cleared up a number of issues except this one. The network name on the server is Network 2 and on another machine the network is named Network 3. Don't know what this means. This XP machine used to connect to the server without issues. My server guy moved away and well, I am just not that savy on 2008 Server. All the other machines are Windows 7. Oh yes, this is a work group with DHCP from a VPN and a Comcast (bless their souls) gateway.
View 2 Replies
View Related
Aug 24, 2011
net send command not available on server 2008
View 1 Replies
View Related
May 26, 2011
I have rolled out Terminal Services on Server 2008 R2 for a company I used to work for, it worked perfect the users could go home and browse to our web domain and login and use apps straight from the server.there'd be no Microsoft stuff to be accessed just pure Linux Servers but probarbly if users access the online terminal services on Linux they'd be using a Windows PC
View 1 Replies
View Related
Apr 19, 2011
Can I install win2008r2 standard to a 500gb usb ultra portable harddrive and connect it to my net book and run it ? I am studying for the MCITP and want to use it for that purpose?
View 3 Replies
View Related
Sep 4, 2012
I am involved in a huge project that requires Servers PCs to function as Routers in schools to prevent broadcast traffic issues (Thread here: Need Professional Advice on 3 MANs implementations - Long story short: Can't buy regular routers because of budget and neet to use current equipment to make the network work, that is, Windows Servers 2008 with 2 NICs.
Now to the point. We are making tests but can't make Static routes to work properly. Design is as follows:
Now we have seen that we need to use this command (in cmd) to add a static route in W2008:
route add [NETWORK DESTINATION] mask [SUBNETMASK] [GATEWAY] if [NIC]
Q1: What exact command(s) do we have to use to make the Laptop in 10.10.10.0 to access Internet? How would you fill those fields based on the diagram?
Q2: How many Static routes do we need to declare? I am guessing we just need one, but I have been told that I need to activate two (one for packets sent by the laptop to the router, and one for the packets sent by the router to the laptop?)
We have tried several combinations and can't make laptop to access Internet, not even to ping 192.168.1.5. We have just accomplished pinging to 192.168.1.181 from the Laptop, and to ping 10.10.10.2 from the Server but that's as far as we went.
View 4 Replies
View Related
Apr 19, 2012
I just started a new job and on there server running Server 2008 they have a 1TB hd it is mirrored. Issue I saw right away is they save EVERYTHING there. Is there an easy way to just add diskspace like as an external storage or whatever without having to rebuild server and rebuild raid?
View 1 Replies
View Related
Jul 17, 2011
I can't join a Windows 2008 Server from client computer running Windows Vista Business Edition. I get the message "Network path not Found" yet I can ping the server and the server can ping my computer.
View 2 Replies
View Related
Mar 24, 2012
Any methods to install windows 7 OS on 3 laptops at a time by using windows group policy management in Server 2008 LAN.
View 1 Replies
View Related
Jan 9, 2013
I have a home server that I'm using to host a site with a domain purchased from Go Daddy. I understand how to set up a static IP address on Win Server 2008, but my provider will not allow for me to purchase a static IP because I'm a home customer, not a business.My question is this: should I just ipconfig my ip address every seven days and then change my server's address? Is there a software alternative? Is it necessary for me to change it at all?
View 1 Replies
View Related
Nov 5, 2011
i m having one static ipwant to create the network in computer labhow i do thisi have one cisco router assigned with one ip address
View 1 Replies
View Related
Jun 17, 2012
I want to run my own web server. i have Windows 2008 Server R2. we hv one router for internet and it is linked with switch. 30 computer are running on local LAN and getting Internet. now my ISP give me a block of IP. i want to give it to web server. what is the simplest way to use that IP and my web server is Online and also all user have to access to Internet.
View 4 Replies
View Related
Nov 8, 2011
Is it possible to use windows server 2008 as a webhost for a website i'm building?
View 6 Replies
View Related
Feb 8, 2009
Does WCS 5.0 run on Windows 2008 Server. Does it run on a 32 or 64-bit OS? The WCS datasheet does specify that it can be easily installed on VMware Systems. Does it mean it can be virtualized.
View 6 Replies
View Related
Jul 5, 2012
I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
View 2 Replies
View Related
Oct 31, 2011
Our companies dc cant connect to the internet and can only access the local networkI configured everything correctly eg ip adress dns and default gateway
View 1 Replies
View Related
Jul 27, 2011
Any here ever used a Windows Server 2008 Core installation? Got one running on a VM right now, thought I'd try it. After installing VMWare Tools things really speeded up. Now gave it a static IP, installed Active Directory services (DNS along with it) and everything seems to work. The RAM usage is about the same, but so far it's been much more responsive, and it takes a lot less disk space, it needs just under 3GB for the moment. Any else here have one running, or seen one in a production environment? I don't think they're very common yet.
View 3 Replies
View Related
Nov 2, 2011
I install virutal machine "VMWare Workstation7" on windows 7, i am mcitp student for practice i am using windows server 2008 on VMWare, but i can't assign static ip whenever i assign ip it show no access to the internet?
View 3 Replies
View Related
Jul 26, 2011
im having problems getting desktop folder redirection to work on windows 7 machinesI have users set up just with local profiles but want to redirect "my documents" and "desktop" directories to the server. I have set up the gpo's on the server and it all works fine propergating to the xp machines but the windows 7 machines just wont take the desktop redirection. However "eventually" it did take the "my documents" redirection policy
View 7 Replies
View Related
Jan 17, 2011
We need internet connectivity on all workstations
View 1 Replies
View Related
Jan 30, 2013
I have a windows 2008 foundation server at a clients property and they wish to have users access shares on a data drive that is seperate on the server.I have the server setup with active Directory Users and logon scripts to their local shares on the data drive but need to setup VPN so they can use their mapped drives at home.
View 1 Replies
View Related
May 27, 2011
What are step by step methods to install windows 7 OS on 3 laptops at a time by using windows group policy management in Server 2008 LAN.
View 1 Replies
View Related
Nov 29, 2012
i am setting up a network with a server able to run windows server 2008 and using duo core computers as work stations. Will it work with using windows 7 as the operating system for the work stations?
View 5 Replies
View Related
May 1, 2012
I have an office with a network that I have no control of. I can't access the router to make changes at all. The router does have a real IP address.There is a server on this network that I need to access through remote desktop. (Terminal services on Windows Server 2008)Normally I would just pass 1723 through the router and set up VPN. Without control of the router I am lost. I really don't want to use services like Logmein or Gotomypc, because these control the console.
View 1 Replies
View Related
