Connect To A Remote Server
May 9, 2011
We are a small business and recently purchased a business server running Windows Server 2008 from the home office.The home office is fine as everything is hardwired on an intranet. We are trying to set up our two other locations to this home server. All machines are running Windows 7 x64 OS trying to connect to the Server. I've tried to setup a VPN connection but keep getting error 800 vpn tunneling failed. The home server is connected to the internet through a router.want to Connect to a Remote Server.
View 2 Replies
ADVERTISEMENT
May 1, 2011
I get this message when trying to connect to server the remote computer is not available on the network.ISP provider was changed so was IP address.
View 8 Replies
View Related
Apr 12, 2011
My DIR-655 is setup and working fine with WPA personal encryption to different laptops in my home network. Question: Can I connect a wireless print server (LinkSys WPS54GU2) that only supports 'G' wireless encryption? Can the DIR-655 support a mixed N and G network?Do I have to reconfigure my DIR-655 to the slower WEP encryption and create an entirely 'G' network to include one G network device?
View 1 Replies
View Related
Jun 26, 2011
So today all my remote offices can't connect to my server.
Looking as my asa 5510 in my main office it appears that the connections to the other offices is not working..So could this be from the power outage.I don't know how or why it would change no setting have been changed..
But staff at remote offices cannot connect to the server..The error they see is the primary dns is not responding.
View 2 Replies
View Related
Mar 9, 2011
On wireless (lenovo tabletx61) I cannot connect through the intranet - no problem connecting through internet. When I manage to connect through intranet connection is dropped quite often.No problem connecting via Ethernet cables.
View 1 Replies
View Related
Feb 23, 2011
I am looking at purchasing a new Server, but one of my main requirements is to have remote access for users. What are the requirements for good remoting services and which server OS would provide at least adequate remoting services. That is being remoting that provides concurrent use, speed where things do not load slowly and perhaps ease of use, so users can access files.
View 5 Replies
View Related
Sep 14, 2012
I can't remote to server 2003. On the server, the Enable Remote Desktop is gray out with a check mark. On the remote assistance it is not gray out with a check mark. when Remote desktop connection from a workstation here is the message error.Remote desktop can't connect to the remote for one of these reason.
1)Remote access to the server is no enabled
2)The remote computer is turned off
2)The remote computer is not available on the network.
Make sure the remote computer is turned on and connected to the server, and that remote access is enabled.
View 3 Replies
View Related
Feb 8, 2012
How can I find the name of a remote unix server if the client can only provide me the ip address which they use to connect?
View 5 Replies
View Related
Jun 8, 2012
Any temperature monitoring unit we can install in our server room that we can use to moniter the room temperature? We had a near catastrophe recently when the air conditioning unit failed to restart following a power outage.
View 3 Replies
View Related
Sep 19, 2012
I just installed Server 2012 Standard on a trial. I would like to play around with Remote Desktop Services formerly called Terminal Services. I have no clue on where to start but I have installed the RDS roles.
View 7 Replies
View Related
Jun 22, 2012
I have to share some PDF files with members of my organization, I have a Windows XP Pro box dedicated for this. Currently they can access it from within the office as a shared folder. I would like to make it available remotely is there a better way other then as a FTP access.
View 1 Replies
View Related
Aug 14, 2011
I am wanting to improve my download and upload speeds. I read this statement at maheez.com "Solution for requesting pages is set up your own DNS server, with is kinda complicated (basically what happens, is instead of asking some remote server (takes time) for the site IP needed to connect to, youll request it on your own pc, giving you a higher site access speed).
View 1 Replies
View Related
Jan 31, 2012
Ive used an old 2500 in the past with multiple serial connections to achieve console connections to all my devices in remote offices. What to use now a days? I dont want to put in an old 2500, i would rather use something more modern. Ive seen a lot of devices out there.
View 1 Replies
View Related
Mar 14, 2012
We have a VPN using 857 and 877 routers as remote connecting in to a 2800 EZVPN Server.
The VPN is working fine. However, the VPN connections sometimes (after a few hours/days) seem to "freeze". A "show crypt sess" shows the connections as Up/Active, but you can not ping antyhing from remote to server, or visa versa, nor does any traffic flow. I then added a "isakmp keep-alive" on the 2800, which improved the situation a bit, but not as much as I hoped.
On the 877 I then implemented a IP SLA, with Object Tracking and then use a Event Manager to just issue a "clear crypto session" . This solved the problem.
However, what do I do on the 857 ? It does not support Object Tracking or the Event Manager. Is there any other mechanism to monitor and reset these frozen/stale VPN connections automatically ?
View 5 Replies
View Related
Nov 27, 2012
I want from my Cisco 800 Series VPN server so I remote VPN tunnel how can you do that?
View 13 Replies
View Related
Apr 9, 2013
I work from home and log into my work using a token I get into my work server but it keeps freezing and boots me out. If this makes sense. I have to use my mums laptop windows 7.
View 2 Replies
View Related
May 3, 2011
Recently, I have had issues with several Internet browsers. All, return with cannot locate remote server issue. I've flushed the DNS through command, and have turned on/off the firewall, reset the network connections, reset the router, uninstalled mozilla, IE, chrome, and opera, and still haven't been able to get any resolutions. I have a bare minimum connection at the moment.
View 10 Replies
View Related
May 10, 2011
Is there any way to allow multiple computers to connect to the same remote computer and work simultaneously?
View 3 Replies
View Related
Nov 28, 2011
why I am not able to receive an IP address on remote access VPN connection while I can get an IP address on local DHCP pool?I am trying to setup remote access VPN with ASA 5510. It works with local dhcp pool but doesn't seem to work when I tried using an existing DHCP server. It is being tested in an internal network as follows:
!
ASA Version 8.2(5)
!
interface Ethernet0/1
nameif inside
security-level 100
ip address 10.6.0.12 255.255.254.0
[code]....
View 3 Replies
View Related
Jan 15, 2013
why I am not able to receive an IP address on remote access VPN connection while I can get an IP address on local DHCP pool?
I am trying to setup remote access VPN with ASA 5510. It works with local dhcp pool but doesn't seem to work when I tried using an existing DHCP server. It is being tested in an internal network as follows:
!
ASA Version 8.2(5)
!
interface Ethernet0/1
[Code]....
View 9 Replies
View Related
Jul 17, 2011
it's possible to install ACS Remote Agent 4.2.1 on VMWare server. Is it supported by Cisco?Do you have any experience with running the remote agent on VMWare servers?
View 2 Replies
View Related
Oct 25, 2012
I have several locations with time clocks (a Kronos application) on a small home network with outgoing traffic wide open.I have a server in my office behind an ASA5505 router/firewall, also with outging traffic wide open. I have tried taking the device off of the remote network and giving the it a public, static ip address so it is actually on the internet, yet the server cannot see the device, but it can ping it. I was advised to put the device on the remote private network and set up a virtual server using port 8080 at the remote location. The server is still unable to see the device. I also set up a virtual server for VNC. When I am on my server on my work network behind the ASA5505, I can start my VNC viewer and attach to the device at the remote site using the IP of the router (apparently the device has a build in VNC server).
I have also tried to NAT my server to a public IP, I have set up incoming and outgoing rules on the firewalls at both ends.this should be a fairly straight forward connection.
View 7 Replies
View Related
Jun 17, 2011
One of the companies I work for uses a DIR 655 router. I'm having some trouble using FTP there.Initially the problem was that FTP software would hang or give errors when trying to change directories on the remote server. This problem went away when I switched from passive FTP to Active FTP.Now using Active FTP, the files appear to be uploaded with no problem. However, on closer inspection, the uploaded file has 0 bytes on the remote server.
We are uploading from a Windows 7 machine and uploading to our Web Hosting Company's Windows Server. I've actually written the one piece of software that is showing this problem but it uses a widely known open-source FTP library written in .NET. I've never encountered either of these problems with my software until I encountered the DIR-655.The other FTP software client I've tried is FileZilla. It has the same problem, 0 bytes files when using Active FTP.
One solution I've seen on DSLReports was to disable the Stateful Packet Inspection part of the firewall (known as SPI). This is really not a good solution for two reasons. Number one, I do not have access to the router's firmware/ configuration. Number 2, the company has a DIR-655 because they want the additional security. If we're going to disable SPI it just defeats one of the major purposes of owning the DIR-655.
View 1 Replies
View Related
Jun 15, 2011
I have WAG120N and I want to use ssh tunneling to browse the net.In windows, I have to use a software like putty or xShell to establish a ssh connection to remote server.It works perfectly and I don't have any problem with it.The problem occurs when I want to use this ssh account in linux.At first,connection established without any problem or error.After 2-3 minutes it seems ssh dies and no data transmitted through ssh tunnel.I tried this with Symphony ADSL modem(Wired only) and I have no problem with it.I want to know if there's any specific problem or configuration for WAG120N to solve this problem?I like this modem/router and I don't want to sell it and buy any other modem/ router.I have to mention that usually I use wired connections to WAG120N,but at some cases I need to use its wireless features.
View 4 Replies
View Related
Mar 22, 2011
The environment is:
ASA 5505 running 8.2 with ASDM 6.2.
VPN Client Version 5.0.05.0290
I've installed both the anyconnect and ipsec VPN clients and successfully connected for remote VPN server access; however, the client shows no packets being returned. Thinking that I misconfigured, I reset to the factory default and began again. Now I only have the ipsec vpn configured and I have exactly the same symptoms. I followed the directions for configuring the ipsec vpn in Document 68795 and rechecked my configuration and I don't see what I've done wrong. Given that I can connect to the internet from the inside network, and I can connect to the VPN from outside the network (and the ASDM Monitor shows an active connection with nothing sent to the client) I have to believe it is either a route or an access rule preventing communication but I can't quite figure out where (and I've tried static routes back to the ISP and a wide variety of access rules before flushing everything to start over).
[Code] .....
View 4 Replies
View Related
Jul 25, 2011
I have a RV082 and several of my remote laptops cannot access my server using its domain name. It can be accessed using its internal ip address. The issue is that you can log onto the server using remote access and the ip however you cannot use any shortcuts using the domain name. You can see the server with the domin name however no access path is available. This is only on a few remote user laptops. Others work perfectly.
View 1 Replies
View Related
Jul 13, 2011
I would like to allow remote access to a windows server through a ASA (5505) firewall. Users will use the vpn connection in order to connect to a private network. Is there any link that describes the steps for ASDM?
View 3 Replies
View Related
May 5, 2010
i have configure a remote access ipsec vpn in asa5510 and it is working fine when i configure local dhcp address pool assignment. but not working in dhcp-server
below is my configuration
tunnel-group test type remote-accesstunnel-group test general-attributes default-group-policy test dhcp-server 10.1.1.200tunnel-group test ipsec-attributes pre-shared-key *
group-policy test internalgroup-policy test attributes dhcp-network-scope 192.168.135.0 ipsec-udp enable ipsec-udp-port 10000
---snapshot Ping test to DHCP-Server 10.1.1.200----
ciscoasa# ping 10.1.1.200Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 10.1.1.200, timeout is 2 seconds:!!!!!Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
the DHCP server is working when i assign ip address to the LAN network.
View 20 Replies
View Related
Jan 2, 2013
I have a Cisco ASA 5510. I have configured Cisco Anyconnect to authenticate via Windows IAS. We had an outage of that server recently and I tried to remote in via anyconnect and could not. Once the IAS server came up I could get back into the network.
Is there a command that I'm missing that will let me use Anyconnect to connect into the network even if my AAA server is down?
View 2 Replies
View Related
Feb 1, 2011
I've recently installed a new WRT610N router onto my small business network. Previously my network was as follows: Modem - Server - LAN where the server acts as a gateway using routing and remote access.
The addition to the setup now has the router between the modem and the server itself. After configuring everything - and DISABLING the router firewall and as last resort opening the server to the DMZ i'm having serious issues opening specific ports but not others.
To be specific - the server is sitting in the DMZ open right now. In my routing and remote access any port that I have being forwarded over to another computer is open from the internet with no issues. The problem lies with ports that need to be opened on the server itself with 127.0.0.1 where i'm getting a "connection timed out" from canyouseeme.org.
Why the local opening of ports is having issue? Before the router was installed everything worked great - however the router is needed for wifi and it cannot be configured as an access point only.
View 3 Replies
View Related
Jun 28, 2012
Can this scenario be done one the cisco 877 router? I have VPN Ipsec up and runing on both site. How can to configure the port forwarding to the remote server over the tunnel? url...
View 16 Replies
View Related
Mar 25, 2013
I updated my RV180W to the latest firmware and found that port forwarding works I started using it.I've just noticed that since changing over to the RV180W, my Apacher server logs show the router's IP address instead of the remote IP address - every remote request appears to come from 192.168.0.1.
How do I get it to forward the remote IP.
View 1 Replies
View Related
Apr 20, 2011
i have a new smc router and my local ip address and remote ip addresses are very similar. The remote ip address is updating my dns server but i am unable to ping it. Its something like 122.61.xxx.1 ?
View 8 Replies
View Related
