Ive used an old 2500 in the past with multiple serial connections to achieve console connections to all my devices in remote offices. What to use now a days? I dont want to put in an old 2500, i would rather use something more modern. Ive seen a lot of devices out there.
View 1 RepliesI am looking at purchasing a new Server, but one of my main requirements is to have remote access for users. What are the requirements for good remoting services and which server OS would provide at least adequate remoting services. That is being remoting that provides concurrent use, speed where things do not load slowly and perhaps ease of use, so users can access files.
View 5 Replies View Relatedwhy I am not able to receive an IP address on remote access VPN connection while I can get an IP address on local DHCP pool?I am trying to setup remote access VPN with ASA 5510. It works with local dhcp pool but doesn't seem to work when I tried using an existing DHCP server. It is being tested in an internal network as follows:
!
ASA Version 8.2(5)
!
interface Ethernet0/1
nameif inside
security-level 100
ip address 10.6.0.12 255.255.254.0
[code]....
why I am not able to receive an IP address on remote access VPN connection while I can get an IP address on local DHCP pool?
I am trying to setup remote access VPN with ASA 5510. It works with local dhcp pool but doesn't seem to work when I tried using an existing DHCP server. It is being tested in an internal network as follows:
!
ASA Version 8.2(5)
!
interface Ethernet0/1
[Code]....
I have to share some PDF files with members of my organization, I have a Windows XP Pro box dedicated for this. Currently they can access it from within the office as a shared folder. I would like to make it available remotely is there a better way other then as a FTP access.
View 1 Replies View RelatedI have a RV082 and several of my remote laptops cannot access my server using its domain name. It can be accessed using its internal ip address. The issue is that you can log onto the server using remote access and the ip however you cannot use any shortcuts using the domain name. You can see the server with the domin name however no access path is available. This is only on a few remote user laptops. Others work perfectly.
View 1 Replies View RelatedI would like to allow remote access to a windows server through a ASA (5505) firewall. Users will use the vpn connection in order to connect to a private network. Is there any link that describes the steps for ASDM?
View 3 Replies View RelatedI have a Cisco ASA 5510. I have configured Cisco Anyconnect to authenticate via Windows IAS. We had an outage of that server recently and I tried to remote in via anyconnect and could not. Once the IAS server came up I could get back into the network.
Is there a command that I'm missing that will let me use Anyconnect to connect into the network even if my AAA server is down?
I am configuring remote access vpn on ASA5505.Everything is working fine so far, except when the client got connected, it still used the local DNS server provided by the ISP. How do I force the client to use the DNS server configured on ASA?
View 7 Replies View RelatedI've recently installed a new WRT610N router onto my small business network. Previously my network was as follows: Modem - Server - LAN where the server acts as a gateway using routing and remote access.
The addition to the setup now has the router between the modem and the server itself. After configuring everything - and DISABLING the router firewall and as last resort opening the server to the DMZ i'm having serious issues opening specific ports but not others.
To be specific - the server is sitting in the DMZ open right now. In my routing and remote access any port that I have being forwarded over to another computer is open from the internet with no issues. The problem lies with ports that need to be opened on the server itself with 127.0.0.1 where i'm getting a "connection timed out" from canyouseeme.org.
Why the local opening of ports is having issue? Before the router was installed everything worked great - however the router is needed for wifi and it cannot be configured as an access point only.
If I set a primary DHCP server in the interface configuration, or if I override DHCP in the WLAN Configuration.Which interface does the WLC use to try and connect to the DHCP on behalf of the wireless clients?IFA) The dhcp server is not on any of the configured subnets.B) The DHCP server is on a different interface's subnet.
View 4 Replies View RelatedI'm setting up WHS 2011 for the first time. When attempting to set up Remote Web Access, WHS continues to recoginze my E4200 model information and router IP address but delivers the message 'Remote Web Access to Your Server is Blocked'. Cisco and MS say the router is compatible with WHS and that it should set up through the wizard but no luck following many attempts, including manual set up of DHCP Reservation and Single Port Forwarding on ports 80/443 (not sure I did this correctly).
I've taken the router back to default settings with the exception of enabling Remote Management under the Remote Management Access section of the Administration menu tab; tried again with the same result. What settings to change to make this work?
We have recently installed Cisco for our wireless solution. We are an education and are looking to let staff and pupils bring their own devices. The route that we are planning to take to let them join the school's WiFi is to implement a RADIUS server so that they can authenticate with their Active Directory username and password. I have tried to test the solution but so far without any success. I am using a Windows Server 2008 R2 as my NPS server, I have setup the Cisco controller as per below:
Security Tab | RADIUS | Authentication - I added my windows server there and the preshared key, the Network User and Management is ticket and the server responds to a ping command,In the WLANs Tab, I selected my test WLAN and under Security | AAA Servers I selected the RADIUS server that I configured in the Security TabI then try to logon to my test WLAN and on the Cisco WLAN controller I get the following error: AAA Authentication Failure for UserName:test User Type: WLAN USER
Before trying to tinker with policies on the Windows Server I was wondering if the RADIUS is correctly setup on the Controller or have I missed something obvious?
I have therefore 2504 Wireless Controller with a wireless access point AIR-CAP1602I-E-K9 (LWAPP image version 7.4.1.37) I saw that I needed to update the Controller in 7.4 for compatibility with my AP. Now when I connect my AP I get error messages:
*Mar 1 00:01:02.387: %CAPWAP-3-ERRORLOG: Did not get log server settings from D
HCP.
*Mar 1 00:01:02.387: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL
[Code]....
I tried to remotely access my disk connected to the USB port of the EA4500 and it failed until I disabled the IPv4/IPv6 SPI Firewall options. Surely, the firewall should not block the router's own FTP server!
View 8 Replies View RelatedI am planning to implement wireless network in my work place. Plan is to have two networks one for guests and one for employee. I am trying to find a guide for 2500 WLC but couldn't find one.I've been reading couple of articles about setting up radius server and CA. I want to know what the best way to approach this.In my environment I got a CA server windows server 2003 and current DC's are windows server 2008 R2.I got 2500 WLC with POE switch and 4 aironet AS 1142.
View 16 Replies View RelatedI am planning to implement wireless network in my work place. Plan is to have two networks one for guests and one for employee. I am trying to find a guide for 2500 WLC but couldn't find one.
I've been reading couple of articles about setting up radius server and CA. I want to know what the best way to approach this.
In my environment I got a CA server windows server 2003 and current DC's are windows server 2008 R2.
I got 2500 WLC with POE switch and 4 aironet AS 1142.
Region : Singapore
Model : TL-WDR4300
Hardware Version : V1
I need to set up remote access to my HDD connected to my WDR4300, so I can always go online when I am out to retrieve the saved files in the HDD. However I have zero knowledge of network setting of the FTP servers, I can gain access when I am home and connected to the Wireless network, but how to gain access remotely.
We have a couple of Access Points which are not registering with WLC 2500. I followed-up on the two LAPs in the dorm. They were cycling through red, amber, green, indicating they were trying to join the controller but could not.
Recently, we have changed our IP Schema for the Wireless Devices and I believe there is an IP Conflict between APs and WLC. Earlier APs were cofigured with Static IP Address assignment, thus they can't change their IP Address.
how to reset the Access Point? I know we can hard reset them by pressing the Mode button manually.
Is there another way via which this can be done witout removing the Access Points from their enclosures?
We have a Cisco 2500 WLC with 136 APs. Recently, we discovered eight APs that were not listed on the Wireless > Access Points > All AP list. These APs were once working and connected, but now they are no longer in the All AP list. I located one of these APs and found the green LED blinking. I power cycled the AP and it came back online with a solid green LED and was then registered on the All AP list. The All AP list will only show the connected APs. I would like to know if there is a method to show the APs that were once connected and are no longer registered so we can better identify when an AP is not working?
View 15 Replies View RelatedRecently, I have configured a small Wireless Network with Cisco 2500 WLC (25 AP License) running version 7.3.101.0 ,Total 15 APs were installed and associated with the Controller successfully.I have configured WLAN with WPA2-PSK.
I came across a strage issue, where all Android devices can't access Internet via Wireless.When I checked the Controller log, the Android devices (Phones, Tablets) are successfully authenticated and associated to the Wireless Network (They got the IP Address from the DHCP Server configured on the Switch) but they can't access internet.
There is no issue with Apple devices (IPhones, IPADs) and Wireless Laptops. Even the Apple devices and laptops getting IP Assigned from the Same DHCP pool configured on the Switch.
Any issue connecting just Android devices? All other devices connect fine.
Is there any limitation/configuration on the WLC which restricts the Internet Access only to the Android devices?
Have a Cisco 2500 WLAN with Cisco 1142 Lightweight Access Points.IOS: WLC & AP IOS is 7.4.100.0
Seems to be when the APS reboot or lose power we cannot issue command to bring the APs back up from the WLAN- we have to log onto each AP via a console cable and bring the interfaces up.
We have recently been given this unusual task. The setup is a series of CAP3502P access points, and a wireless controller (either 2500 Series or 5500 Series), as well as other standard network infrastructure.
In this network, the client (mobile/wireless) devices must be able to detect when they change what access point they are communicating through, while also requiring a seamless transition. Ie, if the client device is communicating via access point A, and displaying the application menus for A, when the user walks to the area services by access point B, it must detect that sot he application can display menus for B, without the user having to select "B".
Is there a way for the client device to detect which access point it is using and provide that to an application? Or alternatively a way for a host service residing on a server to get that information from the wireless controller?
Does AIR-CT2504-25-K9 spupports AIR-LAP1262N-E-K9 Access Point? How can I check this?
View 1 Replies View RelatedWe are a small business and recently purchased a business server running Windows Server 2008 from the home office.The home office is fine as everything is hardwired on an intranet. We are trying to set up our two other locations to this home server. All machines are running Windows 7 x64 OS trying to connect to the Server. I've tried to setup a VPN connection but keep getting error 800 vpn tunneling failed. The home server is connected to the internet through a router.want to Connect to a Remote Server.
View 2 Replies View RelatedI can't remote to server 2003. On the server, the Enable Remote Desktop is gray out with a check mark. On the remote assistance it is not gray out with a check mark. when Remote desktop connection from a workstation here is the message error.Remote desktop can't connect to the remote for one of these reason.
1)Remote access to the server is no enabled
2)The remote computer is turned off
2)The remote computer is not available on the network.
Make sure the remote computer is turned on and connected to the server, and that remote access is enabled.
I have created remote access vpn in my ASA 5505. The tunnel is established but i am not able to access the internal network.
View 3 Replies View RelatedWe have a VPN using 857 and 877 routers as remote connecting in to a 2800 EZVPN Server.
The VPN is working fine. However, the VPN connections sometimes (after a few hours/days) seem to "freeze". A "show crypt sess" shows the connections as Up/Active, but you can not ping antyhing from remote to server, or visa versa, nor does any traffic flow. I then added a "isakmp keep-alive" on the 2800, which improved the situation a bit, but not as much as I hoped.
On the 877 I then implemented a IP SLA, with Object Tracking and then use a Event Manager to just issue a "clear crypto session" . This solved the problem.
However, what do I do on the 857 ? It does not support Object Tracking or the Event Manager. Is there any other mechanism to monitor and reset these frozen/stale VPN connections automatically ?
I want from my Cisco 800 Series VPN server so I remote VPN tunnel how can you do that?
View 13 Replies View RelatedIm currently connected to a remote acess vpn setup using the vpn client and am unable to get anywhere around my network, this normalyl works fine The only difference i can see is that the are multiple virtualaccess interfaces pointing to my public ip address, which im presuming is causing routing issues How can i clear these unsed virtual access lines and how can i make it forget them automatically after disconnects?
View 5 Replies View RelatedWe have an ASA5510 and a few days ago we were unable to access some segments from remote access VPN, the problem was not the config. A few hours later the problem was resolved on its own and I suspect we have an IOS bug. This has happened a few times in the past and its becoming an issue. How can this be confirmed and which IOS should we upgrade to? Prefer not 8.3 given the syntax difference
View 1 Replies View RelatedHow can I find the name of a remote unix server if the client can only provide me the ip address which they use to connect?
View 5 Replies View Relatedit's possible to install ACS Remote Agent 4.2.1 on VMWare server. Is it supported by Cisco?Do you have any experience with running the remote agent on VMWare servers?
View 2 Replies View Related