Cisco Wireless :: Web Access With Android Devices On Network - 2500 WLC
May 27, 2013
Recently, I have configured a small Wireless Network with Cisco 2500 WLC (25 AP License) running version 7.3.101.0 ,Total 15 APs were installed and associated with the Controller successfully.I have configured WLAN with WPA2-PSK.
I came across a strage issue, where all Android devices can't access Internet via Wireless.When I checked the Controller log, the Android devices (Phones, Tablets) are successfully authenticated and associated to the Wireless Network (They got the IP Address from the DHCP Server configured on the Switch) but they can't access internet.
There is no issue with Apple devices (IPhones, IPADs) and Wireless Laptops. Even the Apple devices and laptops getting IP Assigned from the Same DHCP pool configured on the Switch.
Any issue connecting just Android devices? All other devices connect fine.
Is there any limitation/configuration on the WLC which restricts the Internet Access only to the Android devices?
I recently purchased a android tablet and want to access my wireless connection through my network. When the tablet recognizes my network but when I enter my router password it wont accept it. I have reset the router back to default and reset a new password and it still will not accept it.
looking for an info if Samsung SGH-1747M device running Android version 4.1.1 supported on Cisco WLC 7.4.100.0 Basically the Samsung device cannot join our test wifi (ipads and ihones are OK).
Updated firmware was installed and settings were reviewed. Intermittently the E1500 looses its ability to connect only to our Android devices and "Cisco Connect" displays that it has lost Internet connectivity. The PC hard-wired to the E1500 and another PC connected wirelessly both work fine when this happens, despite the Cisco Connect message. The Android devices show the presence of the network, but they never "connect" - find the IP address. The problem can only be resolved by re-booting (powering off/on) the E1500. The loss of connectivity to our two Android devices and the Cisco Connect error display always are concurrent. E1500 looses connection to Android devices
Recently purchased the EA3500 router. Everything seems to work great except for Facebook on mobile devices with Android OS using both apps and browser. I can access FB using a laptop's browser.
My wifi router is linksys WRT300N v1.1 At first my wifi works great with this devices . iphone 4s , ipod touch 4 , hp pavilion dv6 , dell inspirion 1545 . But it don't works with android devices I had a bunch of them samsung galaxy s3 , galaxy nexus , amazon kindle and more ...The android devices connect to wifi but wifi doesn't work for them in browsers I can't open pages there's appears <webpage not available> , but I can use skype on android devices.
I just upgraded to the e4200 v2 and I seem to be having connection issues with my android phone and tablet. Both are 802.11n compatable but they seem to have issues staying connected. Just so everyone is up to speed, there are two connections made by android, a general one to the internet, and a second one to the google servers (for syncing e-mail and contacts and the like) When just connected to the internet, the wireless icons are gray, when connected to the google servers as well, the icons turn blue. It's the drop in connection to the google servers that I'm having an issue with. I currently have the router set in full auto for channel and frequency band, but I've also tried setting specific ones thinking maybe the change in channel or something was causing the disconnect. The disconnect will even happen when I'm sitting right next to the router. The phone is a Samsung Galaxy Nexus (Verizon LTE) running Android 4.0.3 and a Asus Transformer tablet (Wifi only) running android 3.2.1.
Setup my DCS-930L for DDNS (Dynamic Domain Name Server) so I can access the DCS-930L via the Internet (couldn't access the camera half the the time while on vacation using mydlink) and can now access the camera using my laptop, Android Thrive, and Motorola Droid 3 via the URL I've created but can only see the video when using the laptop.
I have the DCS-930L set to Java but when I log into the camera with the Thrive or Droid 3 (both Android devices) I don't get video. I can make changes to the camera settings and everything else you can do when logged into the camera but just can't see the video. If I change the 'View Mode' in the video setup to 'Image', I will get a picture on all three devices (Thrive, Droid 3, and laptop).
What do I need on the Droid 3 & Thrive so I can see the video when I log into the DCS-930L with an Android device?
We have a couple of Access Points which are not registering with WLC 2500. I followed-up on the two LAPs in the dorm. They were cycling through red, amber, green, indicating they were trying to join the controller but could not.
Recently, we have changed our IP Schema for the Wireless Devices and I believe there is an IP Conflict between APs and WLC. Earlier APs were cofigured with Static IP Address assignment, thus they can't change their IP Address.
how to reset the Access Point? I know we can hard reset them by pressing the Mode button manually.
Is there another way via which this can be done witout removing the Access Points from their enclosures?
I work at a small business that has an exisiting wired network. Our setup is: Internet > ISP Box > DHCP Server > Switch > Users. I have been attempting to add a wireless router to the network to enable our shop techs to wirelessly access our file computer. I have managed to get the wireless working, but the network was not visible, I could not access any network computers from the wireless, and I could not access the wireless router from our main server. After this I screwed up the settings completely and even a wired connection to the router couldn't connect to the internet. Now I have purchased a WAP54G, but I forsee the same problems when I go to config everything tomorrow.
We have a Cisco 2500 WLC with 136 APs. Recently, we discovered eight APs that were not listed on the Wireless > Access Points > All AP list. These APs were once working and connected, but now they are no longer in the All AP list. I located one of these APs and found the green LED blinking. I power cycled the AP and it came back online with a solid green LED and was then registered on the All AP list. The All AP list will only show the connected APs. I would like to know if there is a method to show the APs that were once connected and are no longer registered so we can better identify when an AP is not working?
Where can I find a log or list of devices that attempted to access my EA4500 wireless network?I am using the cloud services to monitor my EA4500 usage in an apartment environment.
We have recently been given this unusual task. The setup is a series of CAP3502P access points, and a wireless controller (either 2500 Series or 5500 Series), as well as other standard network infrastructure.
In this network, the client (mobile/wireless) devices must be able to detect when they change what access point they are communicating through, while also requiring a seamless transition. Ie, if the client device is communicating via access point A, and displaying the application menus for A, when the user walks to the area services by access point B, it must detect that sot he application can display menus for B, without the user having to select "B".
Is there a way for the client device to detect which access point it is using and provide that to an application? Or alternatively a way for a host service residing on a server to get that information from the wireless controller?
I setup an accespoint on my laptop. Now I want to connect my Phone (android) to this network but, he is asking for an Ip-address I tried the following;
I have a Cisco 4200 Wireless Router connected directly to my cable modem. To extend the wireless range I purchased a Cisco 2500 Wireless Router. As the house is "wired," I can connect the Cisco 2500 to the cable modem in a room separate from the Cisco 4200. My question is how do I configure the Cisco 2500 to connect to the network and provide wireless coverage from both routers.
Model : TL-WDR3600 Hardware Version : V1 Firmware Version : 3.13.23 Build 120820 Rel.73549n ISP : VIMPELCOM
To access USB Storage in Windows I simply type "\tplinklogin.net" in Run window.But how can I access it using Adnroid phone or tablet connected by Wi-Fi?Typing "\tplinklogin.net" in Browser adress line brings me to Google search, typing simply "tplinklogin.net" opens router web interface..
I have installed a video security system into my home/office and several IP cameras are connected via my wired cat5 network which connects to my router and switcher into a PC with internet access. This will allow me to record any break ins and alert me of this event and view it in real time.I would like to restrict access to these devices for anyone else on the network, with either dedicated access or password protection.
We have configured a Cisco ASA 5505 with AnyConnect access. This works great. However, these users cannot seem to ping devices on the private network. We have configured all devices on the network with a 10.10.10.0/24 address space. The inside interface of the ASA i 10.10.10.1/24 and the VPN return addresses are 10.10.10.50 - 10.10.10.65/24.They users can utilize SSH and Oracle or MySQL calls but cannot seem to ping. Obviously, I am over looking something.
I have a 5505 between a vendor router & my company network, vendor is not able to access devices on internal network. I am also not able to access the firewall via asdm
Ive used an old 2500 in the past with multiple serial connections to achieve console connections to all my devices in remote offices. What to use now a days? I dont want to put in an old 2500, i would rather use something more modern. Ive seen a lot of devices out there.
i've got remote desktop and it is amazingle useful.know of an app that lets me link into shared devices on my windows 7 p from my phone? I want to be able to access my hdd without having to be using remote desktop.
I want to setup remote access for my Android phones and tablets using Cisco ASA 5510 . Is there any particular Android client which perform the specified functionality.
I am trying to connect to my office wifi which uses a proxy server. Scenario 1: I am using Samsung Bada (wave 1), connected to the internet successfully and also any applications that require an internet connection including Samsung's app store. While, connecting via open networks like home wifi and other friends' wifi also worked without any issue. Scenario 2: Now I also have an android based Galaxy pocket: even after entering all the required proxy setting as mentioned above, I can access websites via browser but cannot access samsung's app store, google's play store, skype, sipdroid etc. I know it is nothing to do with the network administration as I am still accessing via my samsung wave but not via android. Is there anything like a network profile I need to assign for these applications?
Have a Cisco 2500 WLAN with Cisco 1142 Lightweight Access Points.IOS: WLC & AP IOS is 7.4.100.0
Seems to be when the APS reboot or lose power we cannot issue command to bring the APs back up from the WLAN- we have to log onto each AP via a console cable and bring the interfaces up.
\We have purchased AP 1041 and WLC 2500 and I am doing a testing on the configuration. It is fine when both AP and WLC are sitting on the same network. However, if I connect the AP to the WLC which is on another network, I found that latency is quite high when PING the gateway. Here is the brief topology.
I try to plug the PC to VLAN 1 and do a PING test to the VLAN 1 interface and it causes some packet loss and high latency. [URL] If I do the debug ip udp on the AP, it seems the result is normal.
I managed to make this Android application that can show my DB's records and works just as I wanted.The code uses a PHP script to connect with a local mySql database and a JSON parser is also used.Of course, the application works perfectly in my internet connexion since I forwarded the port 80 to my computer by loging into my router.URL,Now, I'd like to make it more global? I'd like for example to use this app in my university's network.But I can't access the university's router.
I just purchased a Toshiba Thrive tablet and I can't get it to connect to my wireless router. My router (WRVS4400N) works flawlessly with my laptop and desktop. I have spoken to a Cisco tech rep and they assured me that there is not a compatibility problem with the WPA-Personal setting I am using. When I speak to a Toshiba tech they tell me I have a router conflict. To verify this I went to my local Starbucks and low and behold it logged right on with no problem (The Starbucks system was not a protected system). This confirms to me that there is a conflict between the router and the tablet.
I just got the motorola droid 3, my first android device. I'm trying to figure out how to get my device to connect to my network as it won't obtain the IP address.I have a Motorola Surfboard SBV5120 Modem and a Microsoft MN-700 router. I just switched from the Palm Pre Plus which connected perfectly to this network, the network is unsecured and has 2 pc's and a 360 running on it. I was able to connect to my friend's wireless network fine at his house.
Every device I've tried to connect to my WiFi network have no issues connecting at all, except for, as far as I can tell, Samsung Android phones. My sample set is very small, but both a Samsung Galaxy S3 (both before and after custom ROM install) and a stock Samsung Galaxy Nexus.
I've tried setting a vlan up with no encryption and open authentication, and the phones just halt on "connecting". This issue is both on the 2.4Ghz and 5Ghz Radios.
What is working is various computers with both intel and broadcom adapters, a Brother printer, and a Motorola Droid 3 and Motorola Photon Q. I'm starting to think that it's an issue with the radio in the Samsung phones, but the S3 is 5ghz compatible and the Nexus is only 2.4, so they must have different radios. I'm also pretty sure that it's not software on the phones since the S3 had the same problem with stock ROM and CM 10, and the Nexus is Vanilla Google ROM.
I'm waiting to get a chance to upgrade to the new FW for my aironet 1040, and I'm going to fire up an old 1130AG as well as test with an iphone or ipod when I get the chance; I'd just really like to find out what the heck is going on with these samsung phones.
Current configuration : 13969 bytes ! ! Last configuration change at 10:18:26 MST Sun Dec 23 2012 ! NVRAM config last updated at 10:18:26 MST Sun Dec 23 2012
