looking for an info if Samsung SGH-1747M device running Android version 4.1.1 supported on Cisco WLC 7.4.100.0 Basically the Samsung device cannot join our test wifi (ipads and ihones are OK).
View 3 RepliesI Want To Connect My Android Phone To My PC For Internet.
View 1 Replies View RelatedI have a samsung galxy 5 phone.. with ANDROID 2.1 installed in it.. I wan2 access internet thru wi-fi on my mobile. I have got myself a wireless router at home. the wi-fi settings page of my phone says that i am connected to the network i wanna connect to... but when i try 2 access any website thru d browser , it displays page not found..
View 4 Replies View Relatedi have no access to my laptop keyboard, it crashed but i still need to use router for my roku and nintendo wii, however my isp has a captive portal.
View 1 Replies View RelatedEvery device I've tried to connect to my WiFi network have no issues connecting at all, except for, as far as I can tell, Samsung Android phones. My sample set is very small, but both a Samsung Galaxy S3 (both before and after custom ROM install) and a stock Samsung Galaxy Nexus.
I've tried setting a vlan up with no encryption and open authentication, and the phones just halt on "connecting". This issue is both on the 2.4Ghz and 5Ghz Radios.
What is working is various computers with both intel and broadcom adapters, a Brother printer, and a Motorola Droid 3 and Motorola Photon Q. I'm starting to think that it's an issue with the radio in the Samsung phones, but the S3 is 5ghz compatible and the Nexus is only 2.4, so they must have different radios. I'm also pretty sure that it's not software on the phones since the S3 had the same problem with stock ROM and CM 10, and the Nexus is Vanilla Google ROM.
I'm waiting to get a chance to upgrade to the new FW for my aironet 1040, and I'm going to fire up an old 1130AG as well as test with an iphone or ipod when I get the chance; I'd just really like to find out what the heck is going on with these samsung phones.
Current configuration : 13969 bytes
!
! Last configuration change at 10:18:26 MST Sun Dec 23 2012
! NVRAM config last updated at 10:18:26 MST Sun Dec 23 2012
[Code].....
Recently, I have configured a small Wireless Network with Cisco 2500 WLC (25 AP License) running version 7.3.101.0 ,Total 15 APs were installed and associated with the Controller successfully.I have configured WLAN with WPA2-PSK.
I came across a strage issue, where all Android devices can't access Internet via Wireless.When I checked the Controller log, the Android devices (Phones, Tablets) are successfully authenticated and associated to the Wireless Network (They got the IP Address from the DHCP Server configured on the Switch) but they can't access internet.
There is no issue with Apple devices (IPhones, IPADs) and Wireless Laptops. Even the Apple devices and laptops getting IP Assigned from the Same DHCP pool configured on the Switch.
Any issue connecting just Android devices? All other devices connect fine.
Is there any limitation/configuration on the WLC which restricts the Internet Access only to the Android devices?
My wife has a Samsung N150 that connects wirelessly everywhere except at home.All other wireless devices work on the BT HomeHub but not the N150.We have just been on holiday and the N150 connected to everything we came across, without a hitch.
View 1 Replies View RelatedUpdated firmware was installed and settings were reviewed. Intermittently the E1500 looses its ability to connect only to our Android devices and "Cisco Connect" displays that it has lost Internet connectivity. The PC hard-wired to the E1500 and another PC connected wirelessly both work fine when this happens, despite the Cisco Connect message. The Android devices show the presence of the network, but they never "connect" - find the IP address. The problem can only be resolved by re-booting (powering off/on) the E1500. The loss of connectivity to our two Android devices and the Cisco Connect error display always are concurrent. E1500 looses connection to Android devices
View 9 Replies View RelatedRecently purchased the EA3500 router. Everything seems to work great except for Facebook on mobile devices with Android OS using both apps and browser. I can access FB using a laptop's browser.
View 9 Replies View RelatedI am looking for a reference document for the type of devices that are supported under 5Ghz. We are using a 5500 WLC and 3600 WAPs. Lot of users cannot connect to network via mobile devices. Is there a reference doc from cisco which i can use to inform them?
View 5 Replies View RelatedI'm a bit lost with licensing.I have an ASA 5510 and I would like to be able to use mobile devices (iOS/Android) with anyconnect. [code]
my cisco contact said me : "you need only ASA-AC-M-5510"
I have a problem with a samsung laptop. Everytime it connects to the home network it disconnects all the other devices on the network. I have reset router (still same problem). Sometimes it will connect for a while and when a download for updates takes place it will automatically disconnect again.
View 3 Replies View RelatedMy wifi router is linksys WRT300N v1.1 At first my wifi works great with this devices . iphone 4s , ipod touch 4 , hp pavilion dv6 , dell inspirion 1545 . But it don't works with android devices I had a bunch of them samsung galaxy s3 , galaxy nexus , amazon kindle and more ...The android devices connect to wifi but wifi doesn't work for them in browsers I can't open pages there's appears <webpage not available> , but I can use skype on android devices.
View 1 Replies View RelatedI just upgraded to the e4200 v2 and I seem to be having connection issues with my android phone and tablet. Both are 802.11n compatable but they seem to have issues staying connected. Just so everyone is up to speed, there are two connections made by android, a general one to the internet, and a second one to the google servers (for syncing e-mail and contacts and the like) When just connected to the internet, the wireless icons are gray, when connected to the google servers as well, the icons turn blue. It's the drop in connection to the google servers that I'm having an issue with. I currently have the router set in full auto for channel and frequency band, but I've also tried setting specific ones thinking maybe the change in channel or something was causing the disconnect. The disconnect will even happen when I'm sitting right next to the router. The phone is a Samsung Galaxy Nexus (Verizon LTE) running Android 4.0.3 and a Asus Transformer tablet (Wifi only) running android 3.2.1.
View 3 Replies View RelatedThere is support of devices not manufactured by cisco?For example satellite modems.
View 1 Replies View RelatedSetup my DCS-930L for DDNS (Dynamic Domain Name Server) so I can access the DCS-930L via the Internet (couldn't access the camera half the the time while on vacation using mydlink) and can now access the camera using my laptop, Android Thrive, and Motorola Droid 3 via the URL I've created but can only see the video when using the laptop.
I have the DCS-930L set to Java but when I log into the camera with the Thrive or Droid 3 (both Android devices) I don't get video. I can make changes to the camera settings and everything else you can do when logged into the camera but just can't see the video. If I change the 'View Mode' in the video setup to 'Image', I will get a picture on all three devices (Thrive, Droid 3, and laptop).
What do I need on the Droid 3 & Thrive so I can see the video when I log into the DCS-930L with an Android device?
Where can I find a list of supported external HDDs or NAS devices for a Cisco 857w router?
View 2 Replies View RelatedI have installed my new E4200 and it works beautifully. I have several wirelss adapters and a few wired connections through powerline adapters. I also have a second VPN router attached to the 4200.I can see the wireless connected devices with the associated IP addresses. If I plug a laptop directly into the Cisco, I can of course see it.However, I can see none of the devices attatched to the powerline devices? I have a securty cam connected via the powerline and want to know the IP address. I checked with cisco technical support via chat and they said it is impossible. I have used 2 previous routers with the same configuration and can see all devices.
View 1 Replies View RelatedAll of a sudden my laptop, android phone and blu ray player (all wireless devices) can't communicate with my wired devices (marantz receiver and samsung tv). Everything still connects to the internet independently but i can't for instance play music from my wireless laptop to my wired marantz receiver. I had no trouble with this last week and didn't change anything (that I'm aware of) I did get Verizon to switch out my router but it didn't solve anything. My wife's computer also cannot connect to wired devices. Lastly, if I connect my laptop with via ethernet cable it sees wired devices fine. I tried shutting off windows firewall but didn't work. I have no other firewall/virus software installed. I can ping to all devices (wired and wireless) from my laptop.
View 1 Replies View RelatedI just purchased a Toshiba Thrive tablet and I can't get it to connect to my wireless router. My router (WRVS4400N) works flawlessly with my laptop and desktop. I have spoken to a Cisco tech rep and they assured me that there is not a compatibility problem with the WPA-Personal setting I am using. When I speak to a Toshiba tech they tell me I have a router conflict. To verify this I went to my local Starbucks and low and behold it logged right on with no problem (The Starbucks system was not a protected system). This confirms to me that there is a conflict between the router and the tablet.Toshiba tells me that it is not compliant with Android but it is with Windows that is why I don't have an issue with the computers.
View 2 Replies View RelatedWe have the following BYOD environment:
WLC 5508 (7.4.100.0)Cisco Identity Services EngineVersion : 1.1.2.145 Patch Version : 3
During BOYD implementation we faced some problems with Android devices:
1) The Netwrok Setup Assistant (NSA) download process corrupts during the self-provisioning process (captured on 4.1.1 and 4.2.2 version)
2) If NSA is already installed, the network setup process (downloading profile, certificate) stops at last step: connecting to network, meanwhile the connection itself successfully establishes. This bug is captured on 4.2.2 version, 4.1.1 is ok.
Google ACL is configured according to TrustSec docs and permits all traffic to google networks 173.194.0.0/16 and 74.125.0.0/16.
Dir 615, hardware version E4, Firmware version 5.1.Intermittent (95% of the time), problem accessing Google using my Android via wireless. A PC using XP on the same network has no problems. Using the Android on my local library's network I have no problems.Have restored to factory default settings and reconfigured with no improvement.
Modem setup: Setup to connect to another router, UPnP disabled, DHCP server disabled, 802.11 mode -mixed 802.11n & 802.11g (Android connects using 802.11n PC uses 802.11g have forced Android to use 802.11g to no avail), Auto channel scan, (have tried fixed), Channel width 20/40, visible mode.Internet connection Dynamic IP of course it is going out through my other Dlink ADSL 2 modem router. Also disabled QOS engine.
after i enter the security key for my router it says it is unable to connect to the network. it also has me manually put in my ip address and it says my gateway ping is incorrect. where do i find this information
View 1 Replies View Relatedmy samsung laptop is not connectiong to the internet wireless network . my other dell computer is working but samsung laptop says there ius no wireless connectivity.
View 2 Replies View RelatedAndroid users can connect to our hospital guest wireless but will not have connectivity. Our wireless infrastructure is WISM based with 2 controllers on 6509 platform. We have a mixed environment of 1231, 1252 & 3502 series APs.
Had issue connecting just Android devices? All other devices connect fine.
I've found that Android devices (smartphones for sure, and perhaps other devices, like Windows Vista/XP pc's with some Atheros wi-fi adapters) can't connect to our eduroam network (WPA2 Enterprise) if the Access Points (all from Cisco) also have open SSID's configured in it. Once I protect the open networks with, for instance, WPA-PSK, the Android devices immediatly get connected to the eduroam. Is there any fix that can be applied to the Access Points. Below there's a list fo AP models and IOS version we have running. I may mention that this problem doesn't occur with Access Points from other manufacturers like, for instance, Meru Networks.
In the AP's event log appears the folowing:
"Packet to client 0026.3778.081f reached max retries, removing the client"
The steps to mitigate the problem above were applied, but with no results.
PS: The Android versions may vary with the same symptom.
Device types: AP 1100; AP 1130; AP1140;AP1210;AP1250
I'm trying to connect to my wireless network using an android device with certificate but with no success.I'm using a WLC4402 7.0.235.3 SSID Security (WPA2 Auth802.1X + CCKM) [code]
View 7 Replies View RelatedI have CUWN, WLC 5508 is installed and APs are 1142. Network is working fine but I am facing the problem with Android phone which are not browsing for internet.
Android phones connectes with wi-fi, it takes IP from DHCP well, which is pingable from any node of network. even I got be GUI of WLC on Android, but when it goes to browes for internet the message displayed " Page cannot be disply".
In same scenario if configure the Public IP on Android Phone (Via DHCP or Static) then it runs the internet smoothly.
I am having an issue with my Android Tablet running 4.1 (Jelly Bean). It is able to the SSID, but when I try to connect - it stays connecting and then says saved, and never connects, as it does not pick up an IP address. I updated the firmware on the Aironet 1140 due to my Windows 8 pc's not connecting as well, it solved my Windows 8 problem, just not my Android Tablet problem. My Ipads do work. Just any android device I connect.
View 1 Replies View RelatedI recently purchased a android tablet and want to access my wireless connection through my network. When the tablet recognizes my network but when I enter my router password it wont accept it. I have reset the router back to default and reset a new password and it still will not accept it.
View 4 Replies View RelatedMy mother in law bought my daughter a impression android tablet for Christmas it connects fine at public hotspots but I can not get it to connect to our wrt120n router at home. I have tried everything I know to add it. It asks for the password then says getting IP address then disconnects.
View 2 Replies View RelatedI have a new android, MyTouch Q, through T-mobile. The phone says it is connected and the wireless icon appears, but I can't access any data or websites. I've done a hard reset, unplugged both the router and the modem for several minutes, called the phone manufacturer (LG), the carrier (t-mobile), and the internet provider (Cox cable).
View 3 Replies View RelatedI am unable to connect my samsung blu ray dvd BD-P3600 via the wireless connector. I have tried all 3 secure modes with the wep key to my wireless G router, none work. I have tried to manually enter the IP, DNS, etc information manually also to no avail. I have followed all the directionsfor the settings, just unable to connect.
View 3 Replies View Related