Internet Browsers / All Return With Cannot Locate Remote Server?

May 3, 2011

Recently, I have had issues with several Internet browsers. All, return with cannot locate remote server issue. I've flushed the DNS through command, and have turned on/off the firewall, reset the network connections, reset the router, uninstalled mozilla, IE, chrome, and opera, and still haven't been able to get any resolutions. I have a bare minimum connection at the moment.

View 10 Replies


ADVERTISEMENT

Browsers (IE / Firefox) Can't Find Server

Jul 11, 2012

Browsers (IE / Firefox) can't find the server, but direct access sites (Google Earth, Poker Stars) work fine. Running Win7, up to date browsers, wireless cable modem?

View 17 Replies View Related

Cisco Firewall :: 2821 Way To Allow Return Traffic From Internet For NAT Host

Jan 5, 2012

On a 2821 Router with 15.1(3)T1
 
I have an IPSec VPN and NAT configured.  Return traffic from an internal NAT host seems to be blocked by the WAN inbound ACL. What is the proper way to allow return traffic from the Internet for this internat NAT host?  Note: As a test, removing the deny entry on the WAN ACL allows return traffic.

View 7 Replies View Related

Cisco Routers :: RV042 Can't Locate DNS Server

Dec 14, 2012

I'm trying to set up an RV042 as a gateway for our home network. I've cloned the MAC address of the cable modem attached to WAN1, and have set up WAN1 to obtain an IP automatically. The System Summary page shows under WAN Status that WAN1 has been assigned an IP address in the right range for Comcast, the provider. The default gateway address looks good, and the DNS server is, in fact, Comcast's main DNS server for this area.
 
However, when I go to System Management > Diagnostic, the router is unable to resolve basic domain names (e.g., www.cisco.com) or ping addresses outside the LAN. I can ping the router itself successfully. Attempts to access the web through the router fail on domain name look.

View 4 Replies View Related

Nothing But Browsers Can Access The Internet?

Apr 1, 2011

I live on residence at college. I started having internet problems (slow, choppy, cutting out) that eventually stopped a few days ago. Then recently (yesterday) The internet stopped working for everything but my browsers and Norton Internet Security. Steam, DC++, even Adobe updater can't connect. I have booted in safe mode (with networking) and had the same problem.

View 4 Replies View Related

Launch Any Internet Browsers?

Oct 23, 2011

During the upgrade of my itunes/iphone to ios and iCloud, IE suddenly stopped working and hasn't worked since. I keep getting a message saying there is a problem with it and if Windows finds a solution, i will be notified.It's hard to troubleshoot because I can't get on the internet with that PC.It's running Windows 7.

View 1 Replies View Related

Browsers Not Connecting To Internet

Oct 29, 2011

After installing a new windows update, none of my browsers will connect to the internet. Not IE, not Chrome, nor newly installed firefox. Strangely enough, I can use MSN and Skype, but Steam won't connect.I've tried to system restore just to the point before I installed the update, but it failed. Windows blamed it on an anti-virus program. Turned it off, and system restore still won't work. Uninstalled the new updates, but nothing has changed.

View 2 Replies View Related

Internet Browsers Won't Launch On PC

Jan 20, 2012

Any of the internet browsers I have installed on my pc won't launch.

- programs like skype or Y!Messenger work fine
- I did a system restore and nothing
- I uninstalled and reinstalled firefox (that's my main browser, but IE and chrome don't launch either)
- the process shows up for a few seconds in task manager and then just disappears
- sometimes the browser opens but closes itself in less than a second
- I ran a scan with Malwarebyte&Antimalware and nothing shows up

View 1 Replies View Related

Different Browsers For Various Internet Connections

Sep 20, 2011

I have 2 internet connections, 1 wifi and another lan. Can I assign them to different browsers to perform different downloads at the same time to increase my download speed. Are there any softwares to manage 2 connections for such.

View 1 Replies View Related

Use Two Internet Connections In Same Pc For Different Browsers?

Dec 31, 2011

how i can set two differnet internet connections for two different browsers

View 1 Replies View Related

Nothing But Browsers Can Connect To The Internet?

Mar 1, 2013

The problem is with my tower that i hadn't used in a while. I tried to use it recently and nothing will connect to the internet except internet browsers. I have norton 360 on this computer and I am using windows 7.

View 4 Replies View Related

Wireless :: Browsers Don't Connect To The Internet?

Jun 4, 2012

I have a weird problem with my home network that I'm unable to fix:I have 2 laptops (Lenovo and HP) both connect to the wireless network and show up as Local & Internet connected on the Windows 7 OS. Both can ping to an outside network with domain names but no pages open on the browser. There's no error displayed on the browser, the page just tries to keep loading. When I connect both these laptops over the wire, I'm able to browse through all pages easily. I also have 2 phones connected to the same wireless network and I can browse over internet without any problems.

View 3 Replies View Related

Connected To Internet But Can't Surf Web Via Browsers

Dec 15, 2011

I'm having trouble getting any web browser to work/recognize my connection. I've confirmed that I am indeed connected to the internet (I know this because, for example, I have no problem at all downloading games via Steam). For some reason, though, when it comes to surfing the web using a browser it's as if I'm not connected (even Steam can't load the Store page, I can only download games via the Library).I moved an infection a week or two ago, and I suspect it altered something that is causing this issue. I did get some advice to open the browser and go to Tools>Internet Options>Connections>Lan Settings and make sure "Automatically detect settings" was checked, and "Use proxy server for your LAN" was not checked.I did this, and in fact "Use proxy server" WAS checked while Automatically detect settings" WAS NOT checked.

View 19 Replies View Related

Connected To Internet But Web Browsers Not Working?

Oct 19, 2011

I can connect wirelessly at home, yahoo messenger and skype work, but google chrome nor firefox are working. this happened after windows 7 blue screened.I can connect to my mom's wireless network but then it says No internet access....

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersMegan Ben> IPCONFIG/ALL
Windows IP Configuration
Host Name . . . . . . . . . . . . : MeganBen-PC
Primary Dns Suffix . . . . . . . :

[code]....

View 14 Replies View Related

Internet Connects But Browsers Won't Load?

Mar 13, 2011

i know its a DNS problem but I don't know how to fix it.

Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Usersheadsupracing>ipconfig

[Code]....

View 1 Replies View Related

Able To Access Internet But Browsers Not Working

Jun 15, 2011

I have 2 PCs at home, 1 desktop, 1 laptop both running XP SP2, and both hardwired to a DSL router. Last night, all was well, both machines working ok. This morning both machine have the same problem; IE and FF are unable to connect to the internet. Same goes for my smartphone; it can connect to the WiFi network but is unable to browse internet. Funny thing is, I have a stand alone IPphone connected to the same router and it works fine. Both PCs can run Torrent client, I see traffic on "peerblock" but google or hotmail just won't show up either with FF or IE

View 1 Replies View Related

Web Browsers Won't Load Pages Even Connected To Internet

Feb 24, 2012

IE and Firefox both refused to load my homepage (google) or any other page in my bookmarks. Uninstalled and reinstalled both, even going back a couple of versions and still nothing. I know I'm connected as my iPhone works fine. With this in mind, I tried opening up safari to see what that would do and to my supprise, it works fine, bit slow but still, at least it works. So now I defiantly know that the Internet is working.

View 4 Replies View Related

HP Pavilion Connected To The Internet But Browsers Don't Work?

Oct 10, 2011

I can log into MSN and Steam is still connected, etc, but neither IE nor Firefox work. The internet still works in safe mode with networking, and Windows can't find a problem at all. I've run Avast and Spybot in safe and normal mode and they can't find anything. Reset the browsers and my IP address. Friend downloaded Winsockfixer or something and that didn't work either. I really don't want to have to uninstall and reinstall Windows? My computer is an HP Pavilion with Windows 7.

View 4 Replies View Related

Windows XP - Skype Works But Browsers Don't Connect To Internet

Aug 30, 2011

I moved to a new place, with a new internet provider (a dorm, so it's all public). In my old place, my PC worked fine (Windows XP), but now it fails to connect to any of the Browsers. My laptop (Windows 7) is fine though with the same cable. No problems at all.

View 9 Replies View Related

Broadband :: Browsers Not Connect To Internet Even Have Decent Connection

May 24, 2012

Firefox, Safari, SeaMonkey nor Chrome can´t connect internet even I´ve got internet connection

View 5 Replies View Related

Internet Shows Its Connected But Browsers And Email Do Not Work

Jul 18, 2012

my neighbor is having a problem with her computer, its an HP touch smart [not sure of model] every other computer in her household works [1x wired 1x wireless].

the computer in question has had repeated problems and various hardware issues and has been sent out for repair on more than one occasion all for non software related issues, i take care of software issues and diagnose hardware problems and i have done so without a hitch until now.

when the problem first started happening i would do a system restore to a point were it was working, but that does not seem to be working anymore

i have tried disabling firewalls [she uses AVG internet security edition which is on all of her computers], windows firewall, disabling and re-enabling network drivers, updating drivers, installing different and previous versions of browsers

View 4 Replies View Related

Laptop Wifi Is Fine But Internet Browsers Can't Browse

Nov 3, 2011

I try pinging google, its fine, antivirus and other software update in time, but internet browsers cannot browse net

View 4 Replies View Related

How To Locate Security Key For Wireless Internet Connection

Jan 14, 2012

How do I locate my security key that I've forgotten and misplaced.

View 2 Replies View Related

Cisco VPN :: 5505 - Routing Failed To Locate Next Hop For TCP From Internet

Jul 2, 2012

We need to connect from an external computer connected by cisco-vpn-client to one internal server that is behind an ASA 5505 config with Easy VPN. The VPN connection with the client to our 5520 firewall is fine, but when I try to connect to the server on the LAN, FW log says:

Routing failed to locate next hop for TCP from Internet:172.17.1.215/1108 to Lan_Interna:172.33.0.50/3389 
Attached image.

View 22 Replies View Related

Linksys Wireless Router :: WRT54GC - When Run Setup CD Cannot Locate Internet Connection

May 6, 2009

When I run the setup CD the router cannot locate the internet connection.  I'm using a Motorola Surfboard modem. My local PC works fine on the internet.  My remote wireless PC shows limited or no connectivity.  I have switched out the Ethernet cables with no luck

View 5 Replies View Related

Cisco WAN :: Return Path For NAT'd Traffic - 857 And 877

Nov 14, 2011

I have a problem with the return path of NAT'd traffic on a Cisco 877W router. Here's the network setup:
 
gatekeeper1 (192.168.0.1) is a Cisco 857gatekeeper2 (192.168.0.253) is a Cisco 857gatekeeper3 (192.168.0.251) is a Cisco 877W 
The default route is 192.168.0.1 on all devices, however there are some static route defined so that traffic to certain IP addresses bounce off to 192.168.0.253 and use that Internet connection instead. This new connection is designed so that traffic aimed for a certain internal IP address (192.168.0.190) comes via this third internet connection in order to take the load off of the main line. NAT is all configured and appears to be working when .251 is the default route but as soon as I set it back to .1, the traffic appears to come in but doesn't go out again.

View 1 Replies View Related

Cisco VPN :: ASA 5505 - No Return Traffic Is Being Encrypted

May 26, 2012

I've configured an ASA5505 to be  Lan to Lan VPN tunnel endpoint, peering with a linux box.  The ASA is full licensed so that side isn't an issue.PROBLEM:When the tunnel is initialised from the linux box everything comes up okay except the ASA isn't encapsulation any packets.  It is decrypted the packets received from the Linux box okay but no return traffic is being encrypted.When the tunnel is initialised from the ASA, nothing happens.After some troubleshooting I've found that the ACL defining interesting traffic nor the ACL defining NO_NAT aren't being hit at all.
 
ACL for NO_NAT:
access-list NO_NAT line 1 remark ACL USED TO DEFINE WHAT TRAFFIC NOT TO NAT OVER THE VPN
access-list NO_NAT line 2 extended permit ip host PAMS_SERVER object-group LINUX-BOXES 0xc736d5fb
access-list NO_NAT line 2 extended permit ip host PAMS_SERVER 10.11.228.0 255.255.255.0 (hitcnt=0)

[code]....
 
I've checked with the administrator of the linux box and the definition for interesting traffic is exactly the same (except in reverse as should be the case).The firewall is doing other things like NATs and such like too but those NATs have nothing to do with this VPN.  The setup is a LAN to LAN connection with no natting in between.The main parts of the config are attached, i've deleted things that should have a bearing on this however if you think it necessary i can sanitise the config and re-post.  I think it will be working fine as long as the traffic hits those ACLs, however they're not and I'm unsure why.At this time i'm not seeing anything at all when doing an debug cry ipsec or debug cry isa.  The ACL's aren't being hit so i'm guessing it's not even trying to form the VPN as it can't see any traffic that constitutes being 'interesting'.

View 4 Replies View Related

Capture Customer Data In Return For Free Wifi?

Jan 19, 2013

I am looking for a simple First name, surname and email in exchange to unlimited free access to our wifi. Would want the data to load on to Infusionsoft?

View 1 Replies View Related

Return To Work And IT Changed Outlook And Windows Password?

May 2, 2011

I returned to work and found a note that my Outlook and Windows password had been changed during the night by the IT department. Why would they need to change my password? Are they monitoring my work somehow.

View 1 Replies View Related

Cisco Wireless :: Return AIR-LAP1131AG-E-K9 To Autonomous AP To Function Without WCS

Jan 23, 2010

I would like to return the cisco AIR-LAP1131AG-E-K9  to autonomous AP for it to function without WCS.
 
Sometimes it returns checksums error although the ios is valid.

View 6 Replies View Related

Cisco Firewall :: ASA5505 Return Traffic Is Blocked By System

Jul 23, 2012

I've just bought a ASA 5505 to project my LAN. I've already use Cisco router in the past but it's the first time with ASA line.Everythings work except one major point, the return traffic is blocked by the system… I don't really understand how the zone based firewall is supposed to work but it seems OK by default, my LAN side is allowed to talk with the Internet but Internet is not allowed to directly call my LAN. The NAT is setup to use the IP of my outside interface.When I try to ping a public server, the ASA debug log show me that the communication can go out the network, with the good translation, then go back to the ASA from the public server and here, the ASA block it because the communication is not allowed.I've only found two workaround:

-allow inside trafic with static rules, and I say NO ;

-disable the zone based feature by settings all zone to the 0 level…
 
How I'm supposed to make my state-full firewall work with zone based feature?

View 3 Replies View Related

Cisco Firewall :: E4200 Trace Route Doesn't Return DNS Name

Jun 10, 2013

I changed from a Linksys E4200 to a 5505 and when I use trace route, it doesn't return a DNS name for each hop.   I can see the hops shown as asterisks.  Do I have to add something to inspect for this to work?                  

View 1 Replies View Related

Browsers Lose Connection To Internet / Despite Still Having A Connection?

May 13, 2012

Every time I boot up my computer, everything will be working fine for about 5 -10 minutes, but after this, all my browsers will lose connection to the Internet. All of them: IE, firefox, chrome, even the steam browser, all of them just lose connection.The weird thing is, my net connection is perfectly fine: I can still play online games, still use online chat services, still open and use programs like utorrent. It's like something is just blocking all my browser connections.When I run a network troubleshooter, it says "your computer appears to be correctly configured, but the device or resource (Microsoft Corporation: Software, Smartphones, Online, Games, Cloud Computing, IT Business Technology, Downloads) is not responding."I googled this and came across some apparent fixes like flushing and re-registering my dns and restarting my modem, niether of which has worked.In addition, this problem is showing up on two totally separate shared networks and has only affected my computer. Other netwworked devices, like friends/families computers and my iPhone (which I am using to type this) work fine.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved