Cisco Firewall :: ASA5505 Return Traffic Is Blocked By System
Jul 23, 2012
I've just bought a ASA 5505 to project my LAN. I've already use Cisco router in the past but it's the first time with ASA line.Everythings work except one major point, the return traffic is blocked by the system… I don't really understand how the zone based firewall is supposed to work but it seems OK by default, my LAN side is allowed to talk with the Internet but Internet is not allowed to directly call my LAN. The NAT is setup to use the IP of my outside interface.When I try to ping a public server, the ASA debug log show me that the communication can go out the network, with the good translation, then go back to the ASA from the public server and here, the ASA block it because the communication is not allowed.I've only found two workaround:
-allow inside trafic with static rules, and I say NO ;
-disable the zone based feature by settings all zone to the 0 level…
How I'm supposed to make my state-full firewall work with zone based feature?
View 3 Replies
ADVERTISEMENT
Jan 5, 2012
On a 2821 Router with 15.1(3)T1
I have an IPSec VPN and NAT configured. Return traffic from an internal NAT host seems to be blocked by the WAN inbound ACL. What is the proper way to allow return traffic from the Internet for this internat NAT host? Note: As a test, removing the deny entry on the WAN ACL allows return traffic.
View 7 Replies
View Related
Aug 12, 2012
I am having touble with a NAT concept. What I have is a 3rd party software VPN product that basically tunnels encapsulated traffic to/from a server sitting inside the network. Right now this traffic utiluizes a physical interface on the ASA5510, but I need the interface for another project.
What I have is this:
Internet<----->ASA<-->router<-->4507(layer3)
| |
| |-Vlan1
[Code]......
View 1 Replies
View Related
Nov 7, 2012
I have an ASA5510 with 8.3 and a Cisco PIX525 (retiring). The ASA was for VPN traffic only while the PIX was for all other Internet traffic. I'm trying to move all the traffic to the ASA5510 so I used the PIX to ASA migration tool. I migrated the PIX rules over to the ASA5510, however we can't receive email and there is no external access to our internal websites. But the VPN connections remain intact and internal users can get out to the internet.
When I run Packet Tracer on my outside (incoming rules) the packets are dropped at the inside interface. What am I missing?
View 1 Replies
View Related
Nov 14, 2011
I have a problem with the return path of NAT'd traffic on a Cisco 877W router. Here's the network setup:
gatekeeper1 (192.168.0.1) is a Cisco 857gatekeeper2 (192.168.0.253) is a Cisco 857gatekeeper3 (192.168.0.251) is a Cisco 877W
The default route is 192.168.0.1 on all devices, however there are some static route defined so that traffic to certain IP addresses bounce off to 192.168.0.253 and use that Internet connection instead. This new connection is designed so that traffic aimed for a certain internal IP address (192.168.0.190) comes via this third internet connection in order to take the load off of the main line. NAT is all configured and appears to be working when .251 is the default route but as soon as I set it back to .1, the traffic appears to come in but doesn't go out again.
View 1 Replies
View Related
May 26, 2012
I've configured an ASA5505 to be Lan to Lan VPN tunnel endpoint, peering with a linux box. The ASA is full licensed so that side isn't an issue.PROBLEM:When the tunnel is initialised from the linux box everything comes up okay except the ASA isn't encapsulation any packets. It is decrypted the packets received from the Linux box okay but no return traffic is being encrypted.When the tunnel is initialised from the ASA, nothing happens.After some troubleshooting I've found that the ACL defining interesting traffic nor the ACL defining NO_NAT aren't being hit at all.
ACL for NO_NAT:
access-list NO_NAT line 1 remark ACL USED TO DEFINE WHAT TRAFFIC NOT TO NAT OVER THE VPN
access-list NO_NAT line 2 extended permit ip host PAMS_SERVER object-group LINUX-BOXES 0xc736d5fb
access-list NO_NAT line 2 extended permit ip host PAMS_SERVER 10.11.228.0 255.255.255.0 (hitcnt=0)
[code]....
I've checked with the administrator of the linux box and the definition for interesting traffic is exactly the same (except in reverse as should be the case).The firewall is doing other things like NATs and such like too but those NATs have nothing to do with this VPN. The setup is a LAN to LAN connection with no natting in between.The main parts of the config are attached, i've deleted things that should have a bearing on this however if you think it necessary i can sanitise the config and re-post. I think it will be working fine as long as the traffic hits those ACLs, however they're not and I'm unsure why.At this time i'm not seeing anything at all when doing an debug cry ipsec or debug cry isa. The ACL's aren't being hit so i'm guessing it's not even trying to form the VPN as it can't see any traffic that constitutes being 'interesting'.
View 4 Replies
View Related
Jan 31, 2012
On a Catalyst 6500, we configured a SPAN session with VLAN 300 as a source. We configured the session bi-directional ("both" keyword). We connect a sniffer on the SPAN destination port.
Strangely enough, we only see the traffic from the VRF to the firewall, but not the reverse traffic ! What can be the problem ?
View 2 Replies
View Related
Jan 25, 2013
I used the GUI configuration tool for this ASA 5505. When I install it no traffic passes. I am wondering to verify my config. I have masked the usernames for VPN with xxxxxx and yyyyyy. [code]
View 6 Replies
View Related
Nov 15, 2011
I am trying to setup my very first ASA5505 and I cannot get it to pass traffic from the inside to the outside. I am not using NAT/PAT. Here is what I have done so far.
ASA5505(config)# interface Vlan 1ASA5505(config-if)# nameif insideASA5505(config-if)# security-level 100ASA5505(config-if)# ip address 33.46.132.34 255.255.255.248ASA5505(config-if)# no shut
[Code]....
Then from the asdm I permited everything from inside to go out but I cannot get any traffic through. I can ping the outside if I source the outside interface but not if I source the inside. The logs would not show me anything.
I did a packet tracer and it indicates the implicit deny rule at the end of the access-list is stopping my traffic eventhough I have allow rules above it?
I also checked the box in the asdm to allow traffic to pass without NAT
View 5 Replies
View Related
Apr 19, 2012
I got ASA 5510 with base license, can I block all Peer-2-Peer traffic from inside to outside.
ASA Giga 0/0 connected to ISP Router 2811
ASA Giga 0/1 connected to LAN switch 3560
View 3 Replies
View Related
Sep 13, 2011
We have an issue where by we connect to various customers and the Cisco IPSEC remote access works fine from our LAN through an ASA5505 to a customer site.We have 1 customer that we have some issues with. We can connect from the LAN through to the customers VPN, authenticate and establish a tunnel but in we cannot pass traffic. When we try from outside of the office on a public internet connection the VPN works fine. What could cause this issue?
View 3 Replies
View Related
Mar 12, 2012
I have an ASA-5505. [code] I have an Exchange server on the 10.10.10.0 network. I need to be able to allow Active-Sync and OWA from the Guest WiFi through to the Exchange server on the 10.10.10.0 network. The Guest Wi-Fi uses external DNS so traffic is going out to the Internet and getting an IP address which is of course assigned to the Outside interface abd trying to come back in on that interface.How do I make this do what I need? How do I setup the rules to allow this traffic?
View 2 Replies
View Related
May 15, 2012
Let me start by saying that I'm just starting to study for CCNA, so the ASA seems to be a bit above me yet. The ASA's we are using is for VPN to our corporate office and only allowing access to our Citrix environment, so no direct internet allowed. We have a person who works in the remote office who has need for a caption telephone that requires direct access to the internet. The phone only supports DHCP, and getting the ASA to do an ARP reservations is proving difficult. For now I wrote an access list to allow it's DHCP address out but it still isn't working. The access list I wrote is:
access-list 101 extended permit ip host xxx.xxx.xxx.124 any log
access-list 101 extended permit ip any any
access-group 101 out interface outside
When I do a show access-list I'm seeing that traffic is hitting the access list as the hit counter has increased. When I do a show conn I'm seeing one of the IP's that the phone should have access to, however the flags are: saA, so I'm assuming they are not getting a response. According to the manufacturer, only outbound connections are needed, no incoming ports required. All traffic is TCP.
View 8 Replies
View Related
May 20, 2011
I have ASA5505 with bese-license. I like to install proxy sever in my network and i want redirect traffic to the proxy server.
Below i added configuration in my firewall.
ASA(config)#access-list wccp-servers permit ip host 192.168.6.10 any ASA(config)#access-list wccp-traffic permit ip 192.168.6.0 255.255.255.0 any ASA(config)#wccp web-cache group-list wccp-servers redirect-list wccp-traffic ASA(config)#wccp interface inside web-cache redirect in
furher configuration and if this configuration is enough, then how to check whther its working or not in my firewall.
View 1 Replies
View Related
Oct 25, 2012
I have a cisco ASA5505, it runs a wide site to site VPN network and has 4 servers connected to it
10.50.15.4 > fileserver
10.50.15.5 > domain controller (exchange)
10.50.15.6 > terminal server
10.50.15.7 > terminal server
Now yesterday i removed 10.50.15.6 and replaced it with a new terminal server with the same ip address, ever since the ASA is blocking traffic between it and the domain controller (example)
2Oct 27 201214:51:0510600710.50.15.655978DNSDeny inbound UDP from 10.50.15.6/55978 to 10.50.15.5/53 due to DNS Query What has me baffled is the only thing different between today and yesterday is the new server is windows server 2008 and the old one was windows server 2003. The new server has the same LAN ip address as the old one to make the changeover seamless for the users.
why all the sudden my ASA has decided to block the traffic between those machines? all the other machines can talk to it fine just not the domain controller, and seeing that this is a terminal server naturally you can see the problem i face!
this router has worked flawlessly for 2 years now without any config changes and i cant work out why its blocking traffic between those 2 machines.
View 15 Replies
View Related
Sep 17, 2011
I have two attachments that show my basic network layout. I can get from the VPN Cisco Client to Workstation 2 just fine with my current NAT rules in place. I can also get from Workstation 2 to Workstation 3 just fine. But I'm having issues when I try to get from the VPN client to Workstation 3... What would I need to do enable to get to Workstation 3 from the VPN client? IT seems very simple to me (just PAT that traffic as I do the traffic from Workstation 2 to Workstation 3) but that does not work.
View 10 Replies
View Related
Mar 10, 2011
I've had a Cisco ASA 5505 firewall connected to a cable modem (Virgin Media, UK) for the past 3 years. In the last 6 months or so I have noticed that the ASA would drop the outside (internet) connection intermittently, usually at least once every 1-2 weeks - the interface still shows as being up but no traffic crosses it, and computers on the inside network abruptly lose internet connectivity. Rebooting the ASA or administratively shutting down the interface and bringing it back up again would cure the problem straight away until the next time it happens.
In the last couple of days however despite nothing having been changed in the configuration the frequency of this connection drop has increased to the point where I would lose access to the internet within an hour of rebooting the ASA. It does not seem to matter whether or not there is traffic currently going out or not, inside computers just appear to suddenly lose internet connectivity.
I have tried the following without success:
1) I completely wiped the configuration (configure factory-default)
2) I changed the port the cable modem was connected to (eth0/0 -> eth0/7, changing switchport vlan accordingly)
I thought perhaps 2) had fixed it but it lasted a whole 2 hours before I woke up this morning to find that none of the internal equipment had internet access despite the fact eth0/7 was showing as up/up in ASA CLI.
This morning I manually set the eth0/7 port to "speed 10" (10Mbps, full duplex). It was previously set to be auto-negotiation (default) on both speed and duplex. As of this post it has managed to keep the outside connection up for 3 hours - but I'm not optimistic that it is fixed.
Interface counters have never shown any collisions, errors, etc - only packets input and output as expected.
Since the problem persisted across ports (eth0/0 -> eth0/7) I'm wondering whether or not the problem could either be faulty memory, or some kind of speed/duplex incompatibility between the cable modem and ASA.
View 13 Replies
View Related
Nov 14, 2011
I'm going nuts with this ASA5505. This is a secondary firewall used only in emergencies when the primary Checkpoint failes.
The basics, it has two trusted interfaces, E0/1 and E0/2-6. E0/1, inside2 has 192.168.01/29 and inside is 192.168.200.1/24. I'd like any traffic to be allowed from inside and inside2 to outside and any traffic from the inside interfaces should be routed. No restrictions should apply between the two interfaces.
inside works just fine but no traffic is going out of inside2, not to outside or to inside.
View 8 Replies
View Related
Apr 22, 2013
I keep getting a pop-up message from my firewall ( Sygate personal -free ) telling me that NT Kernel and system has been blocked. I checked the box to say don't show this message again, it still shows it every time. minutes in between. It freezes my pc and screws up any typing i'm doing at the time. According to the application list it is checked to allow and running.It is not listed in Task Manager.
View 3 Replies
View Related
Dec 30, 2012
I am a total Cisco novice who has just had a ASA5505 installed to replace a linux freeware firewall (smoothwall).I'm told that the 5505 can't port forward traffic (e.g. ssh) from two external IP addresses to two internal destination machines via the same port # (22 in this example).
View 9 Replies
View Related
Sep 25, 2012
we're looking to use an ASA5505 or 5510 as our firewall but want to see if one of them can prioritize traffic. I know it does QoS but we're wanting to dedicate x amount of our bandwidth to traffic based on destination IP address. Is that possible and does it take a license upgrade?
View 3 Replies
View Related
Jan 10, 2013
we have a Cisco 2901 as a router on a stick for several vlans. Everything on the segment routes fine and accesses the internet just as they should. The 2901 connects to an ASA5505 on port 0/1. Any host connected to the ASA5505 can access the internet, but can not ping into any of the vlans off of the 2901. The strange thing is on either segement of the network I can ping all of the gateways. What is even more strange is when I run wireshark from behind the firewall going into the 2901 I can not see the packet on another wireshark instance behind the 2901. However if I start a ping for a host host behind the asa I can see the packet in wireshark on the host, which I am trying to ping, hit the gateway.
View 15 Replies
View Related
Nov 26, 2011
I am new to the ASA series and I am at a complete loss as to why I cannot configure this router to forward SMTP and RDP traffic to an internal host.
The packet trace tool in ASDM shows complete end-to-end connectivity for RDP but it still fails to connect from outside. This is my config file, what I need to change in order to make it work?
View 19 Replies
View Related
Apr 2, 2013
One of our vendors requires using a public ip address to setup a site-to-site IPSEC vpn. We only have one public ip address and that will be used for the vpn endpoint and for internet access for the local network. I've setup policy NAT from our local network to the outside interface. I'm also using the outside ip address for the crypto map. The tunnel setups successfully and the Tx count increases anytime I try to ping the remote network, but the ping fails and the Rx count does not increase. According to our vendor, we should be able to ping the remote network and connect using port 443. When trying to connect using port 443, I see a SYN timeout in the logs. I'm not sure if the problem is on their end and they're rejecting our traffic, or if something is misconfigured on our end. I'd like to make sure that I have everything configured correctly before I go and point fingers at them.
Local Network - 10.10.9.0/24
Remote Network - 20.20.41.0/24
Remote Peer - 20.20.60.193
.ASA Version 8.2(5)
!
hostname ciscoasa
[code]....
View 4 Replies
View Related
Jun 10, 2013
I changed from a Linksys E4200 to a 5505 and when I use trace route, it doesn't return a DNS name for each hop. I can see the hops shown as asterisks. Do I have to add something to inspect for this to work?
View 1 Replies
View Related
Sep 20, 2012
Our ESP traffic is passing through multiple nodes and we can not establish the tunnel. and I want to know which node blocked ESP traffic. How to trace which node blocked ESP traffic ?
View 5 Replies
View Related
Nov 27, 2011
I have set up an ipsec tunnel between a Cisco ASA 5505 and a Fortigate 80c. The tunnel is set up as I execute pings from inside behind ASA to inside behind FG, however I cannot get connectivity to hosts behind the Fortigate (traffic is allowed through policies configured on the FG). What I noticed in packet tracer is that traffic is dropped at the step 'Vpn lookup' To troubleshoot I have configured a test ('fake') vpn connection through the vpn wizard and get the same result in packet tracer. I run 8.4 software on the ASA and this is part of the relevant config.
View 1 Replies
View Related
Jan 29, 2012
We are going to be setting up a remote access VPN to a Cisco ASA 5505, once connected to the VPN the internet traffic from the client will then go back out to the internet from the ASA (for web browsing), but Is there anyway to force the traffic through an AV server at the head office site before the traffic goes back out to the internet?
View 5 Replies
View Related
Apr 23, 2012
I am trying to configure dual ISP on my ASA5505.I have everything configured and working when eth0/0 is connected, but when I disconnect it, it doesn't route any traffic.The static route for the primary isp is removed and the static route to the backup isp shows up, but no traffic goes in or out. I should note that I'm doing this as a proof of concept so eth0/0 is connected to a router and eth0/1 is connected to another router. [code]
View 7 Replies
View Related
May 20, 2012
I have a number of sites in China, they have decent inter-country connectivity but poor connectivity when going overseas.
We have a single site in China witha dedicated 1:1 leased line that has good conectivity both inside and outside of China.
All the sites in China have ASA5505 firewalls
One of our Citrix farms is hosted in the UK and although the main site with the leased line is fine accessing the farm the other sites are not. I would like to try and tunnel just the citrix connectivity via a VPN to the China head office then use their connection to get out to the farm.
how to tunnel all traffic but not just specific traffic over the VPN.
View 3 Replies
View Related
Apr 6, 2013
I have a working L2L between two locations. Location A and Location B.
Location A: 172.16.16.0/24
Location B: 192.168.0.0/24
I would like to block anything inbound to Location A from Location B that isn't initiated from Location A. The block should be done on the ASA5505 at Location A. Location B uses an ISR G2 router. i.e. Location A can start an SSH session to a server in Location B Location B cannot start an SSH session to a server in Location. .
I tried using a VPN filter on the ASA5505 but it isn't stateful, I cannot pass any traffic when using it.
Config on my ASA:
access-list vpn-traffic extended permit ip 172.16.16.0 255.255.255.0 192.168.0.0 255.255.255.0
access-list block-vpn-to-local extended deny ip 192.168.0.0 255.255.255.0 172.16.16.0
[Code]....
I also have an AnyConnect VPN setup for the ASA5505 and it is running 8.2(5).
View 4 Replies
View Related
Apr 22, 2013
We are trying to get Teamviewer to work on our WAN, from the log traffic from the PC's to our Cisco IronPort Web Filter it looks like the ASA Firewall is blocking the traffic. We have opened everything we can open on our Cisco IronPort Web Filter and I have a Cisco TAC case open and they said it appears the ASA Firewall must be blocking the traffic.
View 3 Replies
View Related
Jul 27, 2012
how can i unblocked my port 9339
View 3 Replies
View Related
