Cisco Firewall :: ASA5505 - Blocking Internal Traffic Between 2 Servers
Oct 25, 2012
I have a cisco ASA5505, it runs a wide site to site VPN network and has 4 servers connected to it
10.50.15.4 > fileserver
10.50.15.5 > domain controller (exchange)
10.50.15.6 > terminal server
10.50.15.7 > terminal server
Now yesterday i removed 10.50.15.6 and replaced it with a new terminal server with the same ip address, ever since the ASA is blocking traffic between it and the domain controller (example)
2Oct 27 201214:51:0510600710.50.15.655978DNSDeny inbound UDP from 10.50.15.6/55978 to 10.50.15.5/53 due to DNS Query What has me baffled is the only thing different between today and yesterday is the new server is windows server 2008 and the old one was windows server 2003. The new server has the same LAN ip address as the old one to make the changeover seamless for the users.
why all the sudden my ASA has decided to block the traffic between those machines? all the other machines can talk to it fine just not the domain controller, and seeing that this is a terminal server naturally you can see the problem i face!
this router has worked flawlessly for 2 years now without any config changes and i cant work out why its blocking traffic between those 2 machines.
View 15 Replies
ADVERTISEMENT
Jan 10, 2013
we have a Cisco 2901 as a router on a stick for several vlans. Everything on the segment routes fine and accesses the internet just as they should. The 2901 connects to an ASA5505 on port 0/1. Any host connected to the ASA5505 can access the internet, but can not ping into any of the vlans off of the 2901. The strange thing is on either segement of the network I can ping all of the gateways. What is even more strange is when I run wireshark from behind the firewall going into the 2901 I can not see the packet on another wireshark instance behind the 2901. However if I start a ping for a host host behind the asa I can see the packet in wireshark on the host, which I am trying to ping, hit the gateway.
View 15 Replies
View Related
Nov 26, 2011
I am new to the ASA series and I am at a complete loss as to why I cannot configure this router to forward SMTP and RDP traffic to an internal host.
The packet trace tool in ASDM shows complete end-to-end connectivity for RDP but it still fails to connect from outside. This is my config file, what I need to change in order to make it work?
View 19 Replies
View Related
Dec 5, 2012
Since the power failure two days ago, my -ASA stops forwarding traffic to internal servers, for no apparent reason. Packet trace shows all OK, packet capture buffer stays empty when I try to http into the mail server. The only way to get it working is to change the Outside Ip to the one used for mail, then to change it back. It will work OK for a few hours, then stop, with nothing obvious in the logs.
View 2 Replies
View Related
Jul 7, 2012
I have ASA 5505 running 7.2.4, I want to prevent users accessing some web sites such as facebook , youtube and hotmail etc.
Which ASA 5505 IOS version should I use to block web access?
I don't want to isntall a dedicated filtering server ( websense etc) , I just want to block web sites statically on ASA 5505 via ASDM as I only have few sites to block.
know if ASA 5505 can do URL filtering, and what IOS is required ?
View 1 Replies
View Related
Apr 1, 2013
I'm trying to troubleshoot an ASA5505.
The original goal was to block "Mumble/Murmur" (a voip app) traffic, which runs on TCP/UDP 64738, both inbound and outbound, except to a certain host (63.223.117.170).
However, when nothing I tried seemed to make a difference, just to troubleshoot, I decided to try blocking all inbound traffic. I first disconnected ethernet port 0/0 to ensure that it was cabled correctly and the outside interface went down when I did. That worked as expected, so I confirmed I had the right interface and it was cabled correctly.
I then applied a "any any deny ip" rule as the first element in the outside interface access_list, as you can see below. However, it appears to have had no real effect and the hit count is very low (it should be astronomical).
show ver
Cisco Adaptive Security Appliance Software Version 9.0(2)
Device Manager Version 7.1(2)
Compiled on Thu 21-Feb-13 13:10 by builders
System image file is "disk0:/asa902-k8.bin"
[Code].....
View 4 Replies
View Related
Dec 6, 2012
data centre hosted system with 4 servers connected to a CISCO ASA5505, everything was working fine with 4x windows server 2003 machines but since pulling 2 out and replacing them with windows server 2008 machines i get a flood of the error below and it blocks communications back to the IP listed which is the domain controller so naturally this makes the 2 new servers unusable.
1: they are all connected to the inside VLAN directly via the ASA's switch ports.
2: the are all in the same 255.255.255.0 subnet including the ASA inside interface
3: removing the gateway on the affected machines makes no difference the ASA continues to block it which indicates whether or not the machines use the asa as a gateway its inspecting the traffic and blocking. [code]
View 3 Replies
View Related
Jun 20, 2011
I have a XP workstation behind my ASA that can not connect to a client's network via Cisco VPN Client using IPSec...
In the logs it shows the translation is working on 500 but the VPN Client has the error 412, that the client is not responding.
Config below
ASA Version 8.2(1)!hostname RWFW1enable password encryptedpasswd encryptednames!interface Vlan1nameif insidesecurity-level 100ip address 192.168.1.1 255.255.255.0!interface Vlan2nameif outsidesecurity-level 0ip address x.x.x.x
[Code].....
View 16 Replies
View Related
Oct 31, 2012
I thought I had the configuration to allow bi-directional traffic for my Blackberry server. I have a second fw with the same config and it worked on that one. But right now, my blackberry server is down, and all the users are upset.
ASA Version 8.2(2)
!
hostname asa5505
[Code]......
View 4 Replies
View Related
May 28, 2012
We have an internal DNS server that all internal hosts do lookups to .. these requests are forwarded onto open dns for anything the dns server isnt authoritative for.. My question is we have purchased the botnet filter and this requires the asa5505 dns client to be active on at least one interface .. Should i point the asa dns to an external IP such as 8.8.8.8 and apply DNS enabled on interface outside ( am using asdm) I don't want the ASA to control DNS for our internal clients we already have a internal server for this, i DO want the asa5505 to check dns packets against its botnet filter, whilst still using open dns for forwarding.
View 1 Replies
View Related
Dec 18, 2011
we have a cisco ASA5505 with base license and 3 interface configured. Internal 192.168.1.1/24 DMZ 172.16.0.1/24 Outside 20.20.20.20/24 The DMZ is configured to allow the traffic pass to the outside interface only (base license allow only traffic to one interface) in order to let clients on this network to browse internet. On the outside interface there's a nat configuration that let the port 443 to be natted to an in internal server. Is it possible to let the clients in DMZ to access to the internal server on port 443 from the outside interface?
View 3 Replies
View Related
Apr 3, 2013
I am having some trouble accessing some backup Email (Outlook Web Access) and Citrix servers located behind an ASA 5505 firewall at a remote datacentre. Simply put, when I go to the specific URL (e.g. [URL]) I do not arrive at the splash page, I just get a message saying that the server took too long to respond in the web browser. I'm wondering whether I have missed something on the configuration or the firewall itself is not letting my requests through. The remote servers are located at a remote Disaster Recovery site and use the subnet 192.168.4.0/24. I am at head office which is connected to the DR site via a VPN using 192.168.1.0/24.
[Code] .....
View 2 Replies
View Related
Mar 26, 2013
Cisco ASA 5510 directly facing the internet on E0/0 (1 Public IP only) with internal LAN on E0/1. Exchange 2010 OWA working fine with ACL and NAT rules configured.Problem:
•1. Cannot publish internal web servers to outside, have tried PAT.
•2. Have multiple web servers to publish with all on one protocol (HTTP) to a single public IP which I don’t know if it’s possible on a ASA.
•3.When SSL VPN is configured with Local user database, connecting from Anyconnect client gives a certificate error. Upon viewing the certificate it points to the internal mail server.
View 7 Replies
View Related
Sep 18, 2012
I've tried a bunch things but it didn't work, I'm about to gave up! :-/
I have the following scenario:
ASA5510 - v8.3(2)
Interfaces
ETH0/0 = outside = 189.xxx.xxx.129
ETH0/1 = inside = 10.xx.1.15
[Code]....
What should I do to get the SIP and 8080 port working on my Public IP, likewise just as access from my browse the http://189.xxx.xxx.129:8080 and get through directly to my internal server 10.xx.xx.61 ?
View 5 Replies
View Related
Jan 25, 2012
I am in the process of adding a lot of servers to sit behind our new ASA 5505 (8.4) firewall. At the moment I have added 2 servers and they are both NAT'ed to 2 different public IPs.
Server 1 192.168.10.1 -> 80.*.*.1
Server 2 192.168.10.111 -> 80.*.*.6
The first server can only be RDP'ed in to using its public IP which is what I want it to do. The second one has most of the service ports open like 443, 80, 110, 25 and etc. However when I try and browse externally to [URL]. I get an " Error 107(net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error." in Google Chrome or any other browser. and the ASA reports:11:27:30192.168.10.111262680.*.*.6443Inbound TCP connection denied from 192.168.10.111/2626 to 80.*.*.6/443 flags SYN on interface inside and I also get a Land to Land attack detected from 80.*.*.6 to 80.*.*.6
Is it worth setting up a DMZ or can I get away with the setup I have?
View 2 Replies
View Related
Nov 12, 2012
I have the following configuration: An ASA5505 with Security bundle license sits at the perimeter with a single public IP address assigned to VLAN2 (outside) out of a /29 block. I have two servers with static IP addresses of 10.70.21.6 and 10.70.21.7 connected to the inside ports with default gateway of 10.70.21.1 (which is the IP address for the VLAN1 inside). I have already configured a default static route and NATing (PAT) so we have internet connection for the PCs. Now I need to configure the ASA to allow remote desktop connection to the servers (with static IP addresses above). Can I use a spare public IP address for each server and if so, whats the syntax? or is there another method? I have used this before but I had a Cisco 2811 router on the perimeter so the syntax was at then: ip nat inside source static 10.30.1.248 81.85.199.44
View 6 Replies
View Related
Feb 15, 2013
networking but can understand with a bit of explanation.. I own a restaurant and provide free WiFi for my customers with a Cisco E2500, I am gettign bills that are through the roof, I contacted my ISP and was told users were accessing P2P downloads(uTorrent, etc.). How can I block these applications?
View 1 Replies
View Related
Oct 14, 2012
I have a LAN with several linux boxes (Fedora 17, both 32 and 64 bits), as well a a WInXP box. All of these are connected to the same switch, which is connected to the inside port of my PIX 515.
For a few sites (mozilla.org happens to be one of them), for http access, the tcp connection is established, but the "GET" request - or anything else for that matter - will not go through the PIX (from inside to wan). I have verified this by first, using wireshark to watch the packets being sent out from the client box, then by using the trace function in the PIX to see that the packets ARE arriving at the inside interface, but ARE NOT sent out of the wan interface.
This is for the linux boxes ONLY. When I do the same thing with my WinXP box, all works: in the PIX trace, I see the packets arrive at the inside interface, and leave the wan interace. And access to these sites are okay.
(What's a bit weird, although somewhat expected, when I connect my android phone to my LAN via WiFi, it too is unable to reach those sites - but then again, android is linux, right?)
In addition to the tracing, I have narrowed this problem down by connecting a linux box directly to my DSL router, then replacing the PIX with a simple router/gateway. Both of those solutions work.
Some background:
I have been using this PIX for about 10 years now, with the same configuration (except IP addresses). Only in the last several months has this problem started to show up.
I got this pix from a dead company at a really great price (free), so I'd like to keep it, and not have to spend money on something else. I don't have any support license, and have not been able to get any software upgrades. Here is its version info:
taz(config)# sho ver
Cisco PIX Firewall Version 6.2(2)
Cisco PIX Device Manager Version 2.0(2)
Compiled on Fri 07-Jun-02 17:49 by (code)
Serial Number: 405200362 (0x1826ddea)
Running Activation Key: 0x38ac31f3 0x0630df47 0x9a77b805 0x8bc39a60
PS: Since this PIX is at its end of life, I was wondering if any of the software upgrades would be now available without a license?
View 2 Replies
View Related
Apr 22, 2013
OK, I have a 2921 on 15.3-2T. ZBFW is working from the inside to the outside, but the DMZ is not being blocked at all to the inside. I am currently running with subinterfaces. All interfaces have zones attached. I have policies from inside to outside and DMZ to outside, those work fine. Without any policy from DMZ to inside, it can pass traffic freely from DMZ to inside. I have tried making an explicit policy to drop all to inside, still passes. I ended up just having to put an ACL on the interface
I already tried upgrading the IOS, that is how I ended up on the newest version. This is connected to a 2960S with a trunk port. Everything else works perfectly except for the DMZ security. I haven't had time to try to lab it up yet, but wanted to see if any reasons this shouldn't work, as all documentation says it should drop all traffic unless you make a policy to pass traffic.
View 5 Replies
View Related
Jun 21, 2012
ASA 5505 Firmware 8.3(4), ADSM 6.4(2).I have a public IP address of 168.87.3.4.I need to forward ports (5060, 5080, etc.) to one internal address. (192168.1.1).I need to foward different ports (10020-10080) to a different internal address (192.168.1.2) Everything I read tells me how to do this in a 1 to 1 static NAT.
View 1 Replies
View Related
Aug 21, 2011
I just made a move from a PIX 506 to an ASA 5540. I have a user that currently logs into a web portal and runs a job. It is now erroring out. When I run the test it gives me the following message:
Testing ports...
Port 1433: Failed
Port 1150: Success
Port 80: Success
Port 443: Success
One or more tests have failed
The computer we access this site from is on the inside network and the ACL says permit ip any any from the inside out so I am not sure why it is failing. Under the ASA Home screen I see the Top 10 Protected Servers under SYN Attack and it appears that the ASA thinks this is some sort of attack.
View 1 Replies
View Related
Apr 5, 2013
I have a RV110W that's been in service since Dec 2012. All Everything is working fine except every month or so the firewall starts blocking all inbound traffic. It does not respond to remote management access. If I reboot the firewall (pwr off/on) everything works correctly for the next month or so and then it begins blocking all inbound traffic again. Local access to the Internet and VPN tunneling are not affected. When it's working, all my rules and port forwarding work correctly.
View 2 Replies
View Related
Jan 7, 2012
Previous attempts to set up these NAT rules has been met with minimal success. We have been able to get the NAT rules created, and able to ping our inside servers and receivers from a different outside network, but every time we get that far our internal network crashes. Running the Packet Trace utility via the ASDM shows that internal traffic from the servers to the workstations is being blocked by the default implicit rule under the access rule heading that states "any to any, service being ip, action= deny". Reverse traffic from the workstations to the servers is being allowed though. In an effort to start over again, the Cisco ASA has been Factory Defaulted via the CLI, and has had it's Inside network, and Outside IP address set back up. DHCP pool has been setup for a minimal amount of addresses on the inside network, since most of our equipment will always be assigned statics. We reset our static NAT policies, and seem to be having the same problem. My partner and I have been working on this for some time now, and have ourselves so frustrated that I know we are missing something simple. [code]
View 10 Replies
View Related
Apr 2, 2012
My internet link is connected on Internet Router & below downwards Cisco ASA 5520 is connected.ASA is connected with core switch cisco 4510 on downwards. our web based mail [URL] is hosted outside.
Lets suppose ISP pool is 4.4.4.0/28.suppose owa server is Static natted on ASA with 4.4.4.4. my machine traffic is going to internet with same ISP with PAT on Cisco ASA & internet is working on my machine. if i want to access {URL} or ip base for mail access, its not working & also it is not pinging. i suppose to ASA is blocking for returning traffic.
is there any way to traffic will go via same Firewall & comeback on same firewall port?
View 1 Replies
View Related
Apr 18, 2012
I have a 1921 K9 with a 4 port 10/100/1000 EHWIC switch.
Interface 0/1 = 192.168.1.0
EHWIC = 192.168.5.0
I have Active Directory setup on the 192.168.1.0 network. When I attempt to join the domain from 192.168.5.0 it joins but I get errors. After some troubleshooting using portqry I have found that the services related to class map DomainTrafficUDP are being reported by portqry as being filtered regardless of policy map settings (currently set to allow).
Building configuration...
Current configuration : 18833 bytes
!
! Last configuration change at 11:20:25 NewYork Thu Apr 19 2012 by dave
! NVRAM config last updated at 13:56:45 NewYork Wed Apr 18 2012 by dave
!
[Code].....
View 2 Replies
View Related
Oct 10, 2012
I'm able to build my tunnel but unable to RDP nor ICMP back to the internal network.
VPN Client IP: 192.168.200.200
INTERNAL IP: 172.17.130.200
my configuration is below:
HOME-ASAFW02(config)# wr t: Saved:ASA Version 8.4(4)!hostname HOME-ASAFW02domain-name hsd1.nj.comcast.netenable password ViPq56cvd3SGvB08 encryptedpasswd 8bcozHCAwCqA5BmN encryptednames!interface Ethernet0/0description OUTSIDE-Connectionswitchport access vlan 2switchport protected!interface Ethernet0/1description INSIDE-Connectionswitchport protectedspeed 100duplex full!interface Ethernet0/2description WiFi-LinkSYSswitchport access vlan 3switchport protected!interface Ethernet0/3shutdown!interface Ethernet0/4shutdown!interface Ethernet0/5shutdown!interface Ethernet0/6shutdown!interface Ethernet0/7shutdown!interface Vlan1description INTERNAL-Networknameif insidesecurity-level 100ip address 172.17.130.129 255.255.255.128!interface Vlan2description OUTSIDE-Link-to-ISPnameif
[code]....
View 12 Replies
View Related
Nov 26, 2012
I am attempting to block outbound traffic for a specific PC on my LAN using the ASDM.
View 2 Replies
View Related
Jul 29, 2011
i have reviewed this configuration a couple of times and I am not seeing my error. I have two internal subnets, in different VLANs with the ASA being the default router. The internal zone works fine, but the zone called wireless on VLAN 13 doesn't. The firewall blocks all communications and the rules look correct to me. I want all traffic on this wireless subnet to be allowed to cross over the firewall and NAT to the outside interface, just as the inside zone does.
View 1 Replies
View Related
Jan 25, 2013
I used the GUI configuration tool for this ASA 5505. When I install it no traffic passes. I am wondering to verify my config. I have masked the usernames for VPN with xxxxxx and yyyyyy. [code]
View 6 Replies
View Related
Nov 15, 2011
I am trying to setup my very first ASA5505 and I cannot get it to pass traffic from the inside to the outside. I am not using NAT/PAT. Here is what I have done so far.
ASA5505(config)# interface Vlan 1ASA5505(config-if)# nameif insideASA5505(config-if)# security-level 100ASA5505(config-if)# ip address 33.46.132.34 255.255.255.248ASA5505(config-if)# no shut
[Code]....
Then from the asdm I permited everything from inside to go out but I cannot get any traffic through. I can ping the outside if I source the outside interface but not if I source the inside. The logs would not show me anything.
I did a packet tracer and it indicates the implicit deny rule at the end of the access-list is stopping my traffic eventhough I have allow rules above it?
I also checked the box in the asdm to allow traffic to pass without NAT
View 5 Replies
View Related
Aug 30, 2011
I'm usually not working with this product, but this is what I'm trying to do.I have 2 internal networks setup on our Cisco ASA 5505 firewall. (not done by me, I'm a new to this product)I'm trying to access a server on one network from a PC located on the other internal network. (preferable through the web gui)When I try "Packet Tracer" from interface "Trust4" it fails on the NAT phase.(Source ip: 10.0.4.99, Destination ip: 10.0.6.99)
When I check the NAT rule, it says:
Type Source Interface AddressDynamic any outside outside.
View 3 Replies
View Related
Sep 13, 2011
We have an issue where by we connect to various customers and the Cisco IPSEC remote access works fine from our LAN through an ASA5505 to a customer site.We have 1 customer that we have some issues with. We can connect from the LAN through to the customers VPN, authenticate and establish a tunnel but in we cannot pass traffic. When we try from outside of the office on a public internet connection the VPN works fine. What could cause this issue?
View 3 Replies
View Related
Mar 12, 2012
I have an ASA-5505. [code] I have an Exchange server on the 10.10.10.0 network. I need to be able to allow Active-Sync and OWA from the Guest WiFi through to the Exchange server on the 10.10.10.0 network. The Guest Wi-Fi uses external DNS so traffic is going out to the Internet and getting an IP address which is of course assigned to the Outside interface abd trying to come back in on that interface.How do I make this do what I need? How do I setup the rules to allow this traffic?
View 2 Replies
View Related
