Remote Desktop To Virtual Machine

Feb 7, 2012

I have a PC behind a DSL router. In my PC (WinXP SP3) I have a virtual machine also running WinXP SP3. I would like to access the VM via remote desktop. Since I have a dynamic IP, I use the(url)tool to solve the problem. I installed the no-ip sync tool in the VM. Now when I write my no-ip address in the remote desktop from my office, I will access my host system, and not the hosted VM. Does any knows how I should configure things in order to get access to the virtual machine and not to the host machine

View 5 Replies


Can't Remote Desktop In From IMac Into Windows Machine

Feb 9, 2012

I have a Win 7 machine with Win SBS 2011 in my office and an iMac. The Win machine is being setup for Exchange 2010. My problem is this: I can't Remote Desktop in from my iMac into the Win machine, but CAN when outside the network.The Win7 machine has a static IP, the iMac a dynamic. When I access the internal part of my router I can only see my iMac. I get a "can't connect to win-based machine" error when I try to Remote Connect.The only thing I can think is that using the same gateway is somehow messing things up? I've had two techs try to figure this out and they're both stumped.I was maybe thinking that since both comps are going out the same gateway that I should try anc configure the iMac to try and RDC on a different port, since maybe the iMac is listening on 3389 and sending the RDC back to itself?

View 4 Replies View Related

Unable To Start Remote Desktop Services On Windows 7 Machine?

May 2, 2012

If I am not able to start remote desktop services on windows 7 machine, will machine can be accessible by RDP?

View 1 Replies View Related

Cisco AAA/Identity/Nac :: 2960 - Remote Desktop To Machine 802.1x Authenticated By User (Wired

Jan 22, 2012

802.1x is working properly, 802.1x port is up,but;when I do a remote desktop to machine that is 802.1x authenticated by an user(Wired), first, login to pc successfuly  then(3 minutes) is switch port down..
Debug radius authentication
Debug aaa authentication
Does not appear in the log only message port is down
Cisco 2960, Cisco ACS 4.2 ,MS Active Directory Authentication
 Client:windows xp, windows 7
 Cisco 2960 Port Config
 switchport mode access
dot1x pae authenticator
dot1x port-control auto
spanning-tree portfast
spanning-tree guard loop

View 1 Replies View Related

Can't Use IP On Virtual Machine

Jun 7, 2012

I am trying to configure a NIC IPv4 with IPv6 disabled on a virtual machine (win server 2008)The instructions I got say that I need to use IP when I enter this IP and use subnet mask I get the following error. Why this is and if there is a way to resolve the error?

View 3 Replies View Related

How To Access A Virtual Machine Throughout The Internet

Aug 29, 2012

I wish to access my virtual pc remotely, As i have downloaded OTRS ticketing system on a virtual machine and i wish to access it remotely. The physical server IP is 62.84.xx.xx the Virtual server IP is 10.0......"check link below please"

View 2 Replies View Related

Connecting From Real To Virtual Machine On Another PC

Aug 10, 2012

I still use some old applications on windows XP.So I run them on vware.I could visit the real PC from virtual PC without any problem.But I could not visit the virtual pc by another real PC.No matter how I change the connection type.

View 1 Replies View Related

Cisco :: How Well Does LMS 4.0 -300 Work On Virtual Machine

Apr 25, 2012

We have purchased LMS 4.0 -300 and were wondering how well the software will perform on a Virtual Enviornment.

View 3 Replies View Related

Local Filtering Software Or Virtual Machine

Feb 7, 2013

I'm in the process of installing a Virtual Clustering for studying and wanted to get some mail filtering for my Exchange 2010. Of course my clients and what I normally use is cloud filtering like mimecast, etc. Any know of a local filtering software or a virtual machine that does filtering I can place between my IP and Exchange?

View 3 Replies View Related

Transfer The Messages Or Files From One Virtual Machine To Another?

Aug 14, 2012

how to transfer the messages or files from one virtual machine to another virtual machine in oracle virtual box

View 1 Replies View Related

Virtual Machine - Can Guest OS Become Infected Through Host OS

Jan 5, 2013

VIRTUAL MACHINE ~ Can Guest OS become Infected Through Host OS ?If I setup and use a virtual machine running/containing both a Host OS and a guest OS ... do they remain completely separate entities when operating one or the other?My main concern is Virus related ... if for instance I'm Running Windows 7 as the host and XP as the guest and I get the host OS infected, will the guest XP OS also contract it by default because it is operating on the same disk?

View 1 Replies View Related

Lost Connection To Internet On A Virtual Machine?

Feb 18, 2013

Implement the procedures required so that machine 1 and machine 2 can communicate statically with one another. Outline the TCP/IP settings to be used on each of the machines and set this machine up accordingly. I followed this guide http:[URL]....tid=210 but what has happened is that now the two machines can't connect to the internet. How can I fix this?

Here is a links to the ipconfig/ all on the XP virtual machine http:[URL]....the default gate way here is the same as on my actual working machine.

View 2 Replies View Related

Protocols / Routing :: Use Virtual Machine As Webserver?

Feb 17, 2013

I am running a websever on virtual machine on ubuntu .how can i forward all traffic coming to my ip to virtual machine which is on my are my configs.

OS - Windows 7
Router - DLink
Virtual machine network Setting - Bridged adapter.

View 19 Replies View Related

How To Connect Website On Virtual Machine To The Internet

Jun 1, 2012

I have created a virtual server that hosts a ticketing website on it, locally i can access the website when i input my private ip .

Now i want to make it accessible to the agents outside my company , i have change my private ip to a public one, but the problem is still there,i cant connect . i disabled the firewall , just so i would be sure its aint a F.W problem and still , not working .

View 2 Replies View Related

Home Network Access From Virtual Machine

Mar 3, 2013

I recently installed VMplayer on my Win 7 machine, and I installed Win XP on the VM. So far everything seems to work fine. However, on my home network I have a Linksys NSLU2 mini network server which has a flash drive plugged in that contains my files that I access from any of my home PC's. No problem accessing it from the Win 7 machine, but when I try to setup a "new network place" on the XP system, I get an error telling me that the address is not valid.

View 8 Replies View Related

Ubuntu 12.04 / Virtual Machine Network Configuration?

Sep 22, 2012

My host OS is Ubuntu 12.04 and I am running a LAMP stack there. I have several Windows virtual machines (XP and Windows7) running in Virtual Box so I can test IE6, IE7, etc..

I frequently move this laptop between a few wireless networks and sometimes I am without an internet connection. I pause and save the VM execution state. Regardless, I want the virtual machines to be able to access the sites I am hosting locally on Ubuntu. The virtual machines do not need regular internet access. On the host I can point the browser at localhost or any subdirectory that apache is serving and view pages I've set up already. What is the best configuration for this?

Should I use Bridged or NAT virtual adaptors and should the guests use static IP's or DHCP ? I've also considered using ad-hoc networks between guests and host, but I think this will require that the host disconnect from any other networks (with internet access).

View 1 Replies View Related

AAA/Identity/Nac :: ACS 5.3 - Install RSA Authentication Manager Server Into Virtual Machine?

Jan 22, 2012

it was possible to install RSA Authentication Manager server into the ACS 5.3 Virtual Machine ?

View 0 Replies View Related

Windows 7 - Connect Virtual Machine To Host Via IEEE1394 / USB Or Serial Port

May 15, 2013

I have a host machine (Laptop, Win 7 Home Premium x64) running Windows 7 Ultimate x64 on VMWare Workstation 9. I've got this system set up for UMDF driver development, because I need a target machine to debug drivers on. However, because I'm developing drivers for Win 7 (x86 and x64), I cannot connect to the virtual machine on via a simple network connection. Connection methods are outlined here.

I have tried a few different pieces of software (mostly Eltima software), and have Google'd every combination of phrases that I can think of. I can't find any information on this anywhere. I don't just need to share data between the machines, I need a more "physical" connection.

Does any know how to do this, or if there's another (preferably more simple) way of doing it?

View 1 Replies View Related

Boot Virtual Desktop From Hyper-v On A Network

Apr 29, 2013

I already know there's an easier way of doing this; DHCP, TFTP and CCBoot.But this is not what I want.I have Hyper-V installed on a Windows Server 2008 R2 with a Windows 7 VM installed on it.What I wanna do is take this image of Windows 7 and boot it on another PC on the same network. The client PC doesn't have a hard disk so I want to boot it using a USB stick.I've already installed and configured Remote Desktop Roles and was able to access the Hyper-v VM using a browser locally.So what can I do next? I can't take the .vhd image and put it on a usb stick because it's too large (30GB) and converting it to .vdi would still be large.

View 3 Replies View Related

Cisco Wireless :: AP1020s / Getting DHCP On A VMWare Virtual Machine Via Wireless?

Jun 3, 2008

I have a WLC 2006 running 4.2.130 code with AP1020s.I also have several users that have VMware machines that run various flavors of Linux, etc Virtual Machines on Windows XP Pro.
The Windows XP works fine on the wireless.  It is the VMWare Virtual Machine running the Bridged ethernet connection that have problems.
The problem is that the Virtual Machine doesn't get  a DHCP IP address from the wireless network.
If the user plugs into the wired network all works fine.I have done some captures that show the DHCP requests going out with the MAC address of the wireless client, but no DHCP replies.
It looks like the WLC is seeing the additional DHCP requests from the MAC address of the wireless adapter and dropping them.The same DHCP server (different scopes) are used for both wireless and wired clients.
The DHCP server shows NO activity when the Virtual Machine tries to get a DHCP IP address.The DHCP server is a Cat 6500 running IOS v12.2(33)SXH.  DHCP activity was monitored using debug IP dhcp server events/debug IP dhcp server packets. The VMWare Workstation tried is 6.02-6.04.

View 13 Replies View Related

Wireless :: Remote Desktop Can't Connect To Remote Connection

Mar 9, 2011

On wireless (lenovo tabletx61) I cannot connect through the intranet - no problem connecting through internet. When I manage to connect through intranet connection is dropped quite often.No problem connecting via Ethernet cables.

View 1 Replies View Related

Connect Remote Machine Using Modem

Jan 31, 2012

I have to connect client machine using Modem. They Have their Telephone number and they are saying that by dialing that number I have to connect their machine using that number from modem. How can I do this and which hardware, software I need i.e requirement of things to do this

View 2 Replies View Related

Group Policy Change On Remote Machine?

May 27, 2011

I have 4-5 machines connected to each other in network which are in workgroup. Now I want to change one group policy on remote machine. The name of that policy is " Network access: sharing and security model for the local accounts :- Guest only" . How can I change this policy from remotely?

View 1 Replies View Related

Linksys Wireless Router :: WRT54G Replace XP Machine With Wired Desktop Running Windows 7

Apr 28, 2010

I have a Linksys WRT54G router; have a cable internet connection through the router; and two wired desktops, one running Vista (32-bit) and the other XP. I would like to replace the XP machine with a wired desktop running Windows 7 (64-bit).

View 8 Replies View Related

Cisco WAN :: 1841 / Can't Ping Every Machine Across GRE Tunnel To Remote Subnet

Apr 7, 2011

I have an GRE Tunnel across my head office and remote site with multiple subnets using cisco 1841 routers.I can ping most of  the devices on the remote side, but I can not ping certain devices.These  devices respond to ping requests on the local LAN, but not through the WAN link. If I change the IP of device than it start responding. I am using same gateway and mask on these devices.The remote site is running classic STP on switches with distribution switch being the root bridge.

View 4 Replies View Related

Cisco Routers :: Setup VPN Tunnel Between Linux Machine And RVS4000 At A Remote Site?

Jul 21, 2011

I'm trying to set up a VPN tunnel between a Linux machine and a RVS4000 at a remote site (served via satellite connection). After many efforts, I finally succeeded (based on Openswan). However, while PINGing is OK, big packets (from the RVS4000 LAN to the Linux box) arrive corrupted.
I lowered the WAN MTU, with no success. What finally did the trick is to lower the MTU at the RVS4000 LAN interface. Since this is not possible via the Web I/F, I did it via telnet ("ifconfig eth0 mtu 1400"). However, this change is lost after router reboot. How can I make the LAN MTU setting permanent?

View 1 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR3600 - Create Virtual USB Port For Printer Controller In Remote PC

Feb 21, 2013

Region : Hongkong
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :

When using the USB printer port share function, I found that some PCs, which had never physically connect to a USB printer before, will not have the virtual USB printer port in the port selection. In this way, TP-Link's USB printer controller will not be able to setup the connection. The PC will not be able to use the shared printer from my can I create a virtual USB printer port in the remote PCs (without need to physically connect a printer to them) or other method to use the shared printer?

View 5 Replies View Related

Cisco :: Remote Access Vpn Virtual Access Lines Getting Clogged Up?

Aug 16, 2012

Im currently connected to a remote acess vpn setup using the vpn client and am unable to get anywhere around my network, this normalyl works fine The only difference i can see is that the are multiple virtualaccess interfaces pointing to my public ip address, which im presuming is causing routing issues How can i clear these unsed virtual access lines and how can i make it forget them automatically after disconnects?

View 5 Replies View Related

Remote Desktop Won't Work

Jan 2, 2012

Have just been trying to install Remote Desktop between two XP pro laptops When I try to log on I get a black screen with the connection bar at the top with the name of the remote computer and after about thirty seconds it drops the connection. The remote laptop comes up with logon screen but it isn't visible on the on host machine.I have followed all the instructions including file sharing enabled remote accesss etc, Both machines show up on network map and can ping each other.

View 2 Replies View Related

Using Remote Desktop Connection?

Jan 7, 2012

To use Remote Desktop Connection, is it really this easy:Open up remote desktop connection on your Host PC --- type the IP of the computer you want to access, then click connect --- As long as "Allow Remote Desktop" is enabled on the PC you are trying to connect to, your attempt will be successful

View 1 Replies View Related

Remote Desktop Dos Printing?

Nov 20, 2011

i want give the dos printing from remote desktop to local computer on anotherlocation

View 2 Replies View Related

Remote Desktop Via Dual Lan?

Mar 8, 2013

We have a server which in addition to other services is used to stream live hi-def video from our building during special events.We use a software video/audio production mixer which works very well. But we now would like to make a change in the system.Is it possible/practical to use Remote Desktop via the second - as yet unused - LAN in our server. We really would like to put the operators in a different location where they have both video and in-person view of the event being streamed. But we don't want to use more bandwidth on the LAN...the production mixer handles a *lot* of uncompressed video and tends to be a bandwidth hog.

View 4 Replies View Related

Performance Of Remote Desktop Using VPN?

Sep 20, 2011

Can i build a Server through Remote Desktop using VPN, how will be the performance? Is it advisable ?

View 1 Replies View Related

Copyrights 2005-15, All rights reserved