I wish to access my virtual pc remotely, As i have downloaded OTRS ticketing system on a virtual machine and i wish to access it remotely. The physical server IP is 62.84.xx.xx the Virtual server IP is 10.0......"check link below please"
View 2 RepliesI recently installed VMplayer on my Win 7 machine, and I installed Win XP on the VM. So far everything seems to work fine. However, on my home network I have a Linksys NSLU2 mini network server which has a flash drive plugged in that contains my files that I access from any of my home PC's. No problem accessing it from the Win 7 machine, but when I try to setup a "new network place" on the XP system, I get an error telling me that the address is not valid.
View 8 Replies View RelatedImplement the procedures required so that machine 1 and machine 2 can communicate statically with one another. Outline the TCP/IP settings to be used on each of the machines and set this machine up accordingly. I followed this guide http:[URL]....tid=210 but what has happened is that now the two machines can't connect to the internet. How can I fix this?
Here is a links to the ipconfig/ all on the XP virtual machine http:[URL]....the default gate way here is the same as on my actual working machine.
I have created a virtual server that hosts a ticketing website on it, locally i can access the website when i input my private ip .
Now i want to make it accessible to the agents outside my company , i have change my private ip to a public one, but the problem is still there,i cant connect . i disabled the firewall , just so i would be sure its aint a F.W problem and still , not working .
I am trying to configure a NIC IPv4 with IPv6 disabled on a virtual machine (win server 2008)The instructions I got say that I need to use IP 192.168.210.0/24.However when I enter this IP and use subnet mask 255.255.255.0 I get the following error. Why this is and if there is a way to resolve the error?
View 3 Replies View RelatedI have a PC behind a DSL router. In my PC (WinXP SP3) I have a virtual machine also running WinXP SP3. I would like to access the VM via remote desktop. Since I have a dynamic IP, I use the(url)tool to solve the problem. I installed the no-ip sync tool in the VM. Now when I write my no-ip address in the remote desktop from my office, I will access my host system, and not the hosted VM. Does any knows how I should configure things in order to get access to the virtual machine and not to the host machine
View 5 Replies View RelatedI still use some old applications on windows XP.So I run them on vware.I could visit the real PC from virtual PC without any problem.But I could not visit the virtual pc by another real PC.No matter how I change the connection type.
View 1 Replies View RelatedWe have purchased LMS 4.0 -300 and were wondering how well the software will perform on a Virtual Enviornment.
View 3 Replies View RelatedI'm in the process of installing a Virtual Clustering for studying and wanted to get some mail filtering for my Exchange 2010. Of course my clients and what I normally use is cloud filtering like mimecast, etc. Any know of a local filtering software or a virtual machine that does filtering I can place between my IP and Exchange?
View 3 Replies View Relatedhow to transfer the messages or files from one virtual machine to another virtual machine in oracle virtual box
View 1 Replies View RelatedVIRTUAL MACHINE ~ Can Guest OS become Infected Through Host OS ?If I setup and use a virtual machine running/containing both a Host OS and a guest OS ... do they remain completely separate entities when operating one or the other?My main concern is Virus related ... if for instance I'm Running Windows 7 as the host and XP as the guest and I get the host OS infected, will the guest XP OS also contract it by default because it is operating on the same disk?
View 1 Replies View RelatedI am running a websever on virtual machine on ubuntu .how can i forward all traffic coming to my ip to virtual machine which is 192.168.1.4 on my LAN.here are my configs.
OS - Windows 7
Router - DLink
Virtual machine network Setting - Bridged adapter.
My host OS is Ubuntu 12.04 and I am running a LAMP stack there. I have several Windows virtual machines (XP and Windows7) running in Virtual Box so I can test IE6, IE7, etc..
I frequently move this laptop between a few wireless networks and sometimes I am without an internet connection. I pause and save the VM execution state. Regardless, I want the virtual machines to be able to access the sites I am hosting locally on Ubuntu. The virtual machines do not need regular internet access. On the host I can point the browser at localhost or any subdirectory that apache is serving and view pages I've set up already. What is the best configuration for this?
Should I use Bridged or NAT virtual adaptors and should the guests use static IP's or DHCP ? I've also considered using ad-hoc networks between guests and host, but I think this will require that the host disconnect from any other networks (with internet access).
it was possible to install RSA Authentication Manager server into the ACS 5.3 Virtual Machine ?
View 0 Replies View RelatedI have a host machine (Laptop, Win 7 Home Premium x64) running Windows 7 Ultimate x64 on VMWare Workstation 9. I've got this system set up for UMDF driver development, because I need a target machine to debug drivers on. However, because I'm developing drivers for Win 7 (x86 and x64), I cannot connect to the virtual machine on via a simple network connection. Connection methods are outlined here.
I have tried a few different pieces of software (mostly Eltima software), and have Google'd every combination of phrases that I can think of. I can't find any information on this anywhere. I don't just need to share data between the machines, I need a more "physical" connection.
Does any know how to do this, or if there's another (preferably more simple) way of doing it?
I have a WLC 2006 running 4.2.130 code with AP1020s.I also have several users that have VMware machines that run various flavors of Linux, etc Virtual Machines on Windows XP Pro.
The Windows XP works fine on the wireless. It is the VMWare Virtual Machine running the Bridged ethernet connection that have problems.
The problem is that the Virtual Machine doesn't get a DHCP IP address from the wireless network.
If the user plugs into the wired network all works fine.I have done some captures that show the DHCP requests going out with the MAC address of the wireless client, but no DHCP replies.
It looks like the WLC is seeing the additional DHCP requests from the MAC address of the wireless adapter and dropping them.The same DHCP server (different scopes) are used for both wireless and wired clients.
The DHCP server shows NO activity when the Virtual Machine tries to get a DHCP IP address.The DHCP server is a Cat 6500 running IOS v12.2(33)SXH. DHCP activity was monitored using debug IP dhcp server events/debug IP dhcp server packets. The VMWare Workstation tried is 6.02-6.04.
I have an ASUS RTN66U running Tomato firmware.I have temporary (a month or so) Internet access via a Huawei E3131 3G USB dongle. I am posting this question using said Internet access.
I would like other machines on my network to be able to access the Internet in the usual fashion. That is, through my ASUS router.My initial thought was to plug the dongle into the router and configure it to connect. However, it seems tomato does not support my dongle because I get a message to that effect in the log.
So my next thought was to "point" my router at my Windows machine which has the dongle plugged into it. Thus, any machine connecting to the router would then route through my Windows machine to the Internet.
Im currently connected to a remote acess vpn setup using the vpn client and am unable to get anywhere around my network, this normalyl works fine The only difference i can see is that the are multiple virtualaccess interfaces pointing to my public ip address, which im presuming is causing routing issues How can i clear these unsed virtual access lines and how can i make it forget them automatically after disconnects?
View 5 Replies View RelatedI have a strange error on my home network that I cannot find a solution to.I have an Huawei SmartAX MT882 from TalkTalk acting as a modem connected to a D-Link DSL-G624T acting as a router/switch. Connected to the D-Link I have a Windows 7 Pro machine (64-bit, SP1) and an XP (home i think) machine (sp 2 i think).The SmartAX modem is set up to perform DHCP and DNS relaying and the D-Link has DHCP turned off and DNS relay turned off.The Win7 machine can access the network, get an IP address and access the internet without problems, regardless as to the status of the XP machine.The XP machine can access the network, get an IP address and access the internet with no problems ONLY of the win7 is powered up. When the win7 machine is off, the XP machine seems to drop about 25% of the ping packets between it and the D-Link router and has no internet access (because of this i assume). [code]
View 8 Replies View RelatedNew Win-7 machine set up. I used the printer set-up wizard to install a networked printer in the new machine with absolutely no problem. Proved it would print from that machine.Now, I get a call informing me that her old XP machine, which had been printing to the network printer with no problems, will no longer print.Documents go into the print queue, but they don't get printed.No error messages show up.I did some messing around via remote access, and finally removed the printer with the intention of reinstalling it.Scanning for network printers turned up several redundant instances of the same printer with different names. Some are identified as "invalid" some a "access denied". Bottom line. I can't get any of the selections to install.On the Win-7 machine I did find a window that indicated that the printer is designated as being shared, but I didn't explicitly set it for sharing when I installed it. Also, I somehow got to a window that told me that for printers that were to be shared with other versions of windows I could optionally install drivers to support such machines. Didn't have the driver disk handy and took the window down. Now I can't even find it again.I need sorting this all out.Part of the problem is that out there in "network land" there are redundant remnants of previous installations that are being remembered inappropriately.
View 11 Replies View RelatedI'm trying to share files on our 2 computers (1 vista 1 XP). I can access the XP machine through Vista but not the Vista machine through XP. We have a common LAN modem, a TeleWell-something with 4 LAN ports in te back.I have put the netsetup.exe in a flash drive and run it on Vista,no results,gives me an error. I have succesfully transferred one file (and could do more) from XP to Vista but not other way around.
View 3 Replies View RelatedI have an XP machine that i am not access websites from. the machine is hardwired into a router, the other computers connected to the router(wifi) are able to get access websites without issue.here are the steps i have taken and the things i know so far.im pulling a valid ip address, with correct dns/gateway all that good stuff
able to ping other machines on the network, pings the router, and able to ping google.com(so i know there is connection between me and the internet, and that dns is working)
installed firefox to see if it was a problem with IE, no go.took a look at the active process and looked up anything that wasnt familiar, that seems to be good.virus scan with avast came up clean, avast is able to connect to its database and pull the most current virus defs.
there isnt a firewall, the only security measures on the computer is avast.
I have a problem in my Cisco 1841 in Virtual-Access Interface all interfaces is UP Except Virtual Access is Down . [code]
when i want recover the virtual access to up ,should i do shut & no shut to the ATM interface.What is the cause of the problem, and how I can solve this issue?
How to make linux machine as access point
View 1 Replies View RelatedI have 6 computers here at the office, 5 of which are on XP Pro SP3 and the my main computer running Win 7 Pro SP1. Well 3 of the 5 XP machines can access a shared folder on the 7 machine 1 of the other XP machines can see the 7 computer on the network but can not access the shared folder and the final XP machine can not see the 7 computer at all
View 19 Replies View RelatedWe have a 3745 LNS router, currently there are less number of users connected.when a user dials request authenticated and one virtual-access interface is formed in LNS router.Now the user is disconnected the vpn and connected to VPN again in this case, whether the user is connected to the same virtual-access interface which was assigned before disconnecting or different virtual-access interface is created.
View 0 Replies View RelatedI'm on a large network in my office and we recieved new computers(dell optiplex 390) I'm trying to access a mysqlexpress database on my machine from another one and I'm not able to even access the computer using \MYCOMPUTER method with the same user/pass as my machine on the one I'm trying to connect from. But still no one in my office can reach my computer.
My av is OfficeScan.
I've tried:
+ Disabling the firewall(windows no other firewall in place).
+ Checking network settings
+ enabling sharing settings
+ allowing anonymous connections via the regestry value
+ yelling at the machine.
+ adding users to the Aministrators group.
I have a 3725 routeur configured to receive the PPP/ATM/DSL connexion of our customer. I have found that the routeur has created 1035 virtual-access (1035 is his max) but I only have 85 customer on this router
View 1 Replies View RelatedEverything in the house can connect to the internet aside from my windows 7 machine. It was working fine acouple days ago. it was connecting via a wireless network adapter through a USB. I tried switching the USB ports, hardwiring, re-ownloading/installing the drivers and even reformatting the machine. i still cannot get an internet connection. Only logical thing to do would be to replace the NIC ?
View 3 Replies View RelatedRunning a Windows 7 laptop plugged into a LAN using ethernet cable with internet.The built-in wireless nic on the laptop connects to a totally different internet network. I set up an XP Mode Virtual PC on the laptop with the intention that it would use the wireless internet connection.I set this up by installing Microsoft Loopback Adapter, then sharing the wireless nic to it. The Virtual PC is set to use the Microsoft Loopback Adapter as its network connection.My problem is that only the hard wired internet connection works.The wireless is connected and has an ip address, however no traffic flows through it until i either disable the cabled network or physcially unplug the cable. Is it possible to have my host laptop use the cabled internet connection and my virtual pc use the 2nd wireless internet?
View 1 Replies View RelatedI have a network problem. My windows 7 machine is not detecting win xp machine whereas win xp machine is detecting win 7 machine. They are in the same workgroup named Home. And the networking system is set to work. I have left the homegroup I was previously in. I enabled file sharing for devices that use 40 bit and 50 bit encryption. On XP I have enabled NetBios over TCP/IP. File sharing is enabled on both computers. I think it's something obvious as both instalations on different computers are really fresh and both windows haven't been tampered with.
View 12 Replies View RelatedAs an example, I have 3 computers on a home network:
Machine A
Machine B
Machine C
What I would like to do is isolate "Machine C", so that it cannot communicate with "A" or "B" and vice versa. It should be an entirely separate entity.
Let's say I'm using a Linksys E4200. Is there a good way to configure the above scenario with the default firmware? Is it possible with non-default firmware such as DD-WRT or Tomato? I do not have experience with this but have no problem learning.
My understanding is that this can be done by placing "Machine C" in the DMZ. Unfortunately, I am told a lot of home routers do not have a secure way of setting up DMZ by default. The two routers solution can work but still requires restricting administrative access from "Machine C" and adds an additional potential point of failure.
Region : Others
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : 3.0.0
ISP :
My router is TDW8961ND
The firmware version is 3.0.0
The hardware version is 3.0
I am trying to have a virtual http server at port 80 but when I do this and save, I get this message: "Notice: The WAN HTTP port of CPE will be chaged to 8080 if submit successfully."Then after that I cannot access the server at port 80.