I am running a websever on virtual machine on ubuntu .how can i forward all traffic coming to my ip to virtual machine which is 192.168.1.4 on my LAN.here are my configs.
OS - Windows 7
Router - DLink
Virtual machine network Setting - Bridged adapter.
My host has an IP of 20.168.1.2 from a router DHCP. I have a virtual environment which has a DC and DNS and the IP is: 192.168.1.x how can I get access from my host to the virtual environment? What do I need to setup on the host OS? (Windows)
View 3 Replies View RelatedOur College uses Ethernet connexion for its students with the IPv4 Address of each machine configured using DHCP (not manually). In order to prevent students from playing certain online videogames some ports are blocked for all machines on the network, but they can be manually untagged (ie for competitive play). The problem occurred when we tried to untag the ports to allow online games on this machine. After the allowed ports were modified, the machine refused to assign an IP adress to itself - no matter how many times we try to renew the DHCP Lease. Restoring the previous set of allowed ports fixes the problem, but doesn't allow for online play.
config: OS X 10.8.2 with nothing fancy. Other machines on the network do no experience this problem.
I am trying to configure a NIC IPv4 with IPv6 disabled on a virtual machine (win server 2008)The instructions I got say that I need to use IP 192.168.210.0/24.However when I enter this IP and use subnet mask 255.255.255.0 I get the following error. Why this is and if there is a way to resolve the error?
View 3 Replies View RelatedI have a PC behind a DSL router. In my PC (WinXP SP3) I have a virtual machine also running WinXP SP3. I would like to access the VM via remote desktop. Since I have a dynamic IP, I use the(url)tool to solve the problem. I installed the no-ip sync tool in the VM. Now when I write my no-ip address in the remote desktop from my office, I will access my host system, and not the hosted VM. Does any knows how I should configure things in order to get access to the virtual machine and not to the host machine
View 5 Replies View RelatedI wish to access my virtual pc remotely, As i have downloaded OTRS ticketing system on a virtual machine and i wish to access it remotely. The physical server IP is 62.84.xx.xx the Virtual server IP is 10.0......"check link below please"
View 2 Replies View RelatedI still use some old applications on windows XP.So I run them on vware.I could visit the real PC from virtual PC without any problem.But I could not visit the virtual pc by another real PC.No matter how I change the connection type.
View 1 Replies View RelatedWe have purchased LMS 4.0 -300 and were wondering how well the software will perform on a Virtual Enviornment.
View 3 Replies View RelatedI'm in the process of installing a Virtual Clustering for studying and wanted to get some mail filtering for my Exchange 2010. Of course my clients and what I normally use is cloud filtering like mimecast, etc. Any know of a local filtering software or a virtual machine that does filtering I can place between my IP and Exchange?
View 3 Replies View Relatedhow to transfer the messages or files from one virtual machine to another virtual machine in oracle virtual box
View 1 Replies View RelatedVIRTUAL MACHINE ~ Can Guest OS become Infected Through Host OS ?If I setup and use a virtual machine running/containing both a Host OS and a guest OS ... do they remain completely separate entities when operating one or the other?My main concern is Virus related ... if for instance I'm Running Windows 7 as the host and XP as the guest and I get the host OS infected, will the guest XP OS also contract it by default because it is operating on the same disk?
View 1 Replies View RelatedImplement the procedures required so that machine 1 and machine 2 can communicate statically with one another. Outline the TCP/IP settings to be used on each of the machines and set this machine up accordingly. I followed this guide http:[URL]....tid=210 but what has happened is that now the two machines can't connect to the internet. How can I fix this?
Here is a links to the ipconfig/ all on the XP virtual machine http:[URL]....the default gate way here is the same as on my actual working machine.
I have created a virtual server that hosts a ticketing website on it, locally i can access the website when i input my private ip .
Now i want to make it accessible to the agents outside my company , i have change my private ip to a public one, but the problem is still there,i cant connect . i disabled the firewall , just so i would be sure its aint a F.W problem and still , not working .
I recently installed VMplayer on my Win 7 machine, and I installed Win XP on the VM. So far everything seems to work fine. However, on my home network I have a Linksys NSLU2 mini network server which has a flash drive plugged in that contains my files that I access from any of my home PC's. No problem accessing it from the Win 7 machine, but when I try to setup a "new network place" on the XP system, I get an error telling me that the address is not valid.
View 8 Replies View RelatedMy host OS is Ubuntu 12.04 and I am running a LAMP stack there. I have several Windows virtual machines (XP and Windows7) running in Virtual Box so I can test IE6, IE7, etc..
I frequently move this laptop between a few wireless networks and sometimes I am without an internet connection. I pause and save the VM execution state. Regardless, I want the virtual machines to be able to access the sites I am hosting locally on Ubuntu. The virtual machines do not need regular internet access. On the host I can point the browser at localhost or any subdirectory that apache is serving and view pages I've set up already. What is the best configuration for this?
Should I use Bridged or NAT virtual adaptors and should the guests use static IP's or DHCP ? I've also considered using ad-hoc networks between guests and host, but I think this will require that the host disconnect from any other networks (with internet access).
it was possible to install RSA Authentication Manager server into the ACS 5.3 Virtual Machine ?
View 0 Replies View RelatedI have a host machine (Laptop, Win 7 Home Premium x64) running Windows 7 Ultimate x64 on VMWare Workstation 9. I've got this system set up for UMDF driver development, because I need a target machine to debug drivers on. However, because I'm developing drivers for Win 7 (x86 and x64), I cannot connect to the virtual machine on via a simple network connection. Connection methods are outlined here.
I have tried a few different pieces of software (mostly Eltima software), and have Google'd every combination of phrases that I can think of. I can't find any information on this anywhere. I don't just need to share data between the machines, I need a more "physical" connection.
Does any know how to do this, or if there's another (preferably more simple) way of doing it?
I have a WLC 2006 running 4.2.130 code with AP1020s.I also have several users that have VMware machines that run various flavors of Linux, etc Virtual Machines on Windows XP Pro.
The Windows XP works fine on the wireless. It is the VMWare Virtual Machine running the Bridged ethernet connection that have problems.
The problem is that the Virtual Machine doesn't get a DHCP IP address from the wireless network.
If the user plugs into the wired network all works fine.I have done some captures that show the DHCP requests going out with the MAC address of the wireless client, but no DHCP replies.
It looks like the WLC is seeing the additional DHCP requests from the MAC address of the wireless adapter and dropping them.The same DHCP server (different scopes) are used for both wireless and wired clients.
The DHCP server shows NO activity when the Virtual Machine tries to get a DHCP IP address.The DHCP server is a Cat 6500 running IOS v12.2(33)SXH. DHCP activity was monitored using debug IP dhcp server events/debug IP dhcp server packets. The VMWare Workstation tried is 6.02-6.04.
I have a strange error on my home network that I cannot find a solution to.I have an Huawei SmartAX MT882 from TalkTalk acting as a modem connected to a D-Link DSL-G624T acting as a router/switch. Connected to the D-Link I have a Windows 7 Pro machine (64-bit, SP1) and an XP (home i think) machine (sp 2 i think).The SmartAX modem is set up to perform DHCP and DNS relaying and the D-Link has DHCP turned off and DNS relay turned off.The Win7 machine can access the network, get an IP address and access the internet without problems, regardless as to the status of the XP machine.The XP machine can access the network, get an IP address and access the internet with no problems ONLY of the win7 is powered up. When the win7 machine is off, the XP machine seems to drop about 25% of the ping packets between it and the D-Link router and has no internet access (because of this i assume). [code]
View 8 Replies View RelatedNew Win-7 machine set up. I used the printer set-up wizard to install a networked printer in the new machine with absolutely no problem. Proved it would print from that machine.Now, I get a call informing me that her old XP machine, which had been printing to the network printer with no problems, will no longer print.Documents go into the print queue, but they don't get printed.No error messages show up.I did some messing around via remote access, and finally removed the printer with the intention of reinstalling it.Scanning for network printers turned up several redundant instances of the same printer with different names. Some are identified as "invalid" some a "access denied". Bottom line. I can't get any of the selections to install.On the Win-7 machine I did find a window that indicated that the printer is designated as being shared, but I didn't explicitly set it for sharing when I installed it. Also, I somehow got to a window that told me that for printers that were to be shared with other versions of windows I could optionally install drivers to support such machines. Didn't have the driver disk handy and took the window down. Now I can't even find it again.I need sorting this all out.Part of the problem is that out there in "network land" there are redundant remnants of previous installations that are being remembered inappropriately.
View 11 Replies View RelatedI have a network problem. My windows 7 machine is not detecting win xp machine whereas win xp machine is detecting win 7 machine. They are in the same workgroup named Home. And the networking system is set to work. I have left the homegroup I was previously in. I enabled file sharing for devices that use 40 bit and 50 bit encryption. On XP I have enabled NetBios over TCP/IP. File sharing is enabled on both computers. I think it's something obvious as both instalations on different computers are really fresh and both windows haven't been tampered with.
View 12 Replies View Relatedconfiguring an ACL for a 857 Cisco router for web-server traffic. I've configured a NAT for the inside network and added ACL entries for port 80 access but dont seem to have any luck accessing the website remotely. I suspect there's an ACL rule blocking access.
Setup Internet === Router === Webserver
Router address: 10.0.10.1 Web-server address: 10.0.10.77IP from ISP address: XXX.XXX.XXX.XXX
(masked for security)
The remote office is connected to hq via site to site vpn. I have 1 static IP (on the remote site)that I use for the site to site. I need to publish a web server at the remote site. My question is can I use the same IP for VPN and web server publishing, I am having trouble getting the web server to publish
View 2 Replies View RelatedIm currently working on setting up a small network at home. I have a Dell 2716 and a dell 2650 server running windows server 2003. Ive already setup the dns and domain controller on my server. I have 3 desktops that will connect to the server. so far I have the following setup. ISP---> Dell 2716 --->dell 2650/ computers. I set the computers prefered dns to the servers ip. Im able to join the domain and log in but is there a better way to set it up. Also the server and computers are set to static ip.
View 2 Replies View RelatedI am running a webserver locally and I am unable to resolve it by domain name (e.g. mydomain.com) when I am inside my network. However, I am able to hit it internally (e.g. 192.168.0.10) just fine. When I try to access mydomain.com from inside my network it comes up with my Actiontec router's admin page on 192.168.1.1.Here is my configuration:Actiontec FIOS router 192.168.1.1 (connected to internet)DHCP disabled Netgear Router 192.168.1.2 is in the DMZHas cable running from Actiontec's LAN port to Netgear's WAN port[CODE]
View 7 Replies View RelatedI have my webserver (30.30.30.50) located at DMZ zone. The public IP of my webserver is (119.2.116.191). From outside i can ping my webserver using public IP thats fine.The issue out here is, if i want to ping my webserver using public IP from Internal LAN then i cannot ping but i can ping my webserver using private IP.I am using ASA5520. [code]
View 2 Replies View RelatedWe're running three networks (inside, outside and dmz). Inside is 10.0.1.0/24, dmz is 10.0.2.0/24, outside is a static ip allocated by our ISP. We'd like to configure the following:All traffic from the outside to [static provider ip] on port 80 should go to 10.0.2.200 port 8080.
View 14 Replies View RelatedI have one webserver which open for public via http and https. The server sit behind Cisco ASA 5510. Today our webserver have been hacked by someone. The index.html has been replaced by hacker own index.html file. Is it anyway to detect who did (by IP) this? is my Cisco ASA can give any clue about it? How to prevent from this happening in Cisco ASA? FYI, my ASA only allow HTTP and HTTPS port from outside to internal. This ASA is solely dedicated to protect the webserver.
View 3 Replies View RelatedASA 5510I'm trying to add a static NAT for to allow access to an internal webserver on my DMZ. I've added the config, however i'm still unable to get to it from the outside. I'm able to ping and browse the server from the LAN and I'm also able to ping the external interafce from the outside, but just unable to browse.I've turned on logging and the error I'm getting is "Inbound TCP connection denied...flags SYN on interface outside"
View 0 Replies View RelatedToday, we have a server running SNA that connects to router via the following. Vitrual Server --> Nexus 1000v ---->Nexus 7010 ---->2800 series router.We are trying to move server to new environment where it is Virtual Server ----> Nexus 1000v ----- Fabric Interconnect-----Nexus 55xx-----Nexus 7010-----2800 router.
View 2 Replies View Relatedwhy the WAN protocols like Frame-relay, HDLC and PPP are called Layer2 protocols?What is the address scheme they use?
View 5 Replies View RelatedI have a sg300-10 switch. i update the firmware with the last one. Things are complicated when i create 2 VLAN. ( really 1 VLAN cause the first is native ).So i have the first VLAN with the interface 192.168.1.254 ans the VLAN 2 wich IP is 192.168.2.254
I'm connected with my workstation ( ip : 192.168.1.2/24 with GW 192.168.1.254 ) and i try to ping a web server on VLAN 2 ( ip : 192.168.2.2/24 GW 192.168.2.254 )
Ping is OK ! But when i try to reach any ports of the webserver : Nothing.
I configurated ipsec remote vpn at catalyst 6500.
192.168.14.0/24-- my servers are assigned this subnet
vpn user:10.10.10.0/24
192.168.10.229 ---- webserver ip address
[code]...