Server 2008 has two Nics one connected to outside switch and has internet, other Nic is connected to local siwtches which has 20 systems connected locally but does not have internet. Local systems were getting IP from server, but there was not internet on the lan systems, I restarted the server and local systems lost IP address. earlier everyting was fine.
View 2 RepliesOur current topology is a single N7K with two 48port 10Gb F2 linecards and FEX 2224TP in the server racks. In a few of the racks that house important servers, we have placed dual FEX 2224's. Each FEX has 2 10Gb links back to the N7k (each link on a separate LC). I've tried to create a port-channel for the important servers in such a way that each NIC on the server is connected to a separate FEX - but its failing (simple drawing attached). I've read multiple posts saying this is possible, and others that say its not. I've also submitted a TAC case and have been told it's impossible to port-channel interfaces on separate FEXs connected to a single N7k - but I find this an impossible limitation and want to verify it's actually right. Is this really a limitation?
View 7 Replies View Relatedi am trying to use windows server 2008 R2 as a host machine, and i will be using windows server 2008 R2, and windows server 2008 serverCoreR2 as guest virtual machines. I have two NICs on my computer, and my computer has the memory, the hard drive space, and the cpu to handal this.
View 1 Replies View RelatedI have a PC on a crowded network that cannot handle much more bandwidth usage.I am now going to have a tons of transferring to do offsite so I added a second internet line just to deal with the influx of file transfers.I tried a dual WAN setup on my router and the performance was not improved (if it was nobody noticed it) so I said forget that idea, I only need to do these massive transfers from 1 PC so I will just add a second NIC to the machine so that the 1st NIC can maintain local network functionality and the 2nd NIC will be just for internet traffic (sending files up/down to offsite location) Essentially I just need NIC1 for handling local network, connecting to exchange etc. and NIC2 to handle files transfes to offsite location through seconday internet line.So now I have a desktop PC with two NICs. One of them built into the board, the other a pci add on nic. they are both 10/100
On nic1, there is a connection to my network 200.200.1.X which is the internal network for Exchange, local files transfers etc. This is the network i have always had connected and I have no problem connecting to my exchange server etc. (my server is providing dns/dhcp/wins/AD/MSE for the entire network)so I installed a secondary NIC and a secondary network line to the NIC2 on the machine.I set it up with an IP, a SN, a gateway and a DNSI removed the gateway from the 1st NIC.SO then I tried adding a gateway to BOTH of the NICs..This allows me to do EVERYTHING I want, however when i go to whatismyip.com and get a result, the IP it is giving me is NOT either of my static IPs (each network has a seperate internet line with a static IP). Not sure where this IP is coming from, but if i tracert google.com it says I am going out through the primary adaptor.The new IP from whatismyip.com makes no sense to me as it is not either of my static IPs, however it is very close.Would this be a situation where my ISP see's I have 2 gateways defined so it generates a 3rd external IP for some reason? Never heard of this but i am no guru.essentially I just need NIC1 for handling local network, connecting to exchange etc. and NIC2 to handle files transfers to offsite location through seconday internet line.
Lost internet access through server after change router LAN ip.I did every thing still dont have access to internet .and also read this post:
http:[url]....
I have a router and a server that are connected through two unmanage switches. The router has DSL service in it, and i can ping the router from server3 client through cable and 2 client through WLAN.
My IP Configuration lost after system reboots in SLES 10.but when i restart the nework it again comes back after doing the same two/thre times.
View 1 Replies View RelatedLost password to router default reset of router, says it can not find server
View 1 Replies View RelatedWe've had no problems with our Internet before but yesterday I could only get local access connection. Neither my iPhone, laptop or home computer cud get any further than local connection on wireless.I'v tried the classic turnin it off and on (the router) and I'v tried connection with a cable but still gettin the same connection level! The router is a netgear if that means anything!
View 1 Replies View Relatedi have 2 ftp servers running on windows server 2008 r2 with IIS 7.0 FTP 1 on port 21 works seamlessly, however my second FTP i have port 2121 will when "accessed" via [URL] from inside the router everything will work fine, once attempted to use the ISP address outside or even inside the router everything goes sour. i do recieve a login prompt but the page times out after credentials are supplied, i have configured the firewall to allow 2121 inbound and 2120 outboud, for shits n giggles i allowed 2120 inbound, that didnt work so i deleted that entry after the fact. Ports are forwarded, and to my best knowelege the firewall is configured correctly.
View 1 Replies View RelatedIs it possible to assign public IP address as Router's local IP address (RVL200, RVS4000)?
View 1 Replies View RelatedAfter a brand new Router/Modem combo., there is NO local/wired connection with XP, although other PCs has a good connection with strong signal.
Is it because a spectific folder needed for wired/local connection got lost, .... or Networking card inside got defective?
Our companies dc cant connect to the internet and can only access the local networkI configured everything correctly eg ip adress dns and default gateway
View 1 Replies View RelatedMy pc in the LAN can ping the local server but cannot connect ( cannot browse) it.Others in the LAN can connect it. I can also connect Internet but , not the local server. (when I type \192.168.... on my computer browser , answer " window cannot access \192.168.........)
View 11 Replies View RelatedI run several game servers here locally.... Counter Strike Source, Unreal Tournament 3, Call of Duty 4, Call of Duty 4 GunGame, Garry's Mod.
They all run in their own VM's. All VM's are accessable on wireless via any other protocol RDP and UT3 web admin. None of the games show up in the in game server browsers in the LAN. If you connect wired to the gig switch they show up.
If you go into the console of a game and connect directly to the IP of the machine you can enter the game. There is no problem connecting with the server only that it doesnt show up in the browser on wireless
Obviously my wireless router is funky. WRT160N with DDWRT. Currently setup as an AP.
I have a FTP server at my local network and i have natted the private IP with my Public IP using default FTP Port ( 21) , now i have created Diffrent FTP Account in my server using port 2121 and i am able to login using the private IP with port 2121 , now i want to nat with my public IP with port 2121 and i failed,
1) 125.x.x.x --------- 10.10.1.x : 21 ( Able to access from external network)
2) 125.x.x.x ---------- 10.10.1.x : 2121 ( not able to login from external network and able to login internally )
My HP laptop connects to the router via wifi always. However page loading is very slow. The google home page can take 30-40 seconds. The other laptop we have works fine. If I connect the HP laptop to the router using a cable it runs very quickly always. I have nortons security installed on the HP laptop.I ran ipconfig/all. I pinged the router default gateway address and got back 192.168.0.1. This worked. I then opened a browser and tried to load a page. It was slow to load.I ran ipconfig/all again. The default gateway address had changed. When I pinged the original default gateway address it was losing 1-2 packets and the other packets were very slow. It seems like the router or wifi is losing packets and the default gateway address keeps changing.
I turned off the wifi and used a cable to the router. I ran ipconfig/all. I pinged the router default gateway address and got back 192.168.0.1. I did this several times and the same address came back. Unlike the wifi example above nothing was changing.It must be this laptop's settings as our two smartphones connect to the wifi router and the other laptop as well and speed is not an issue.
acer one 722. have internet connection to a wifi service. click IE on task bar & the router is recognized @ the top bar but wont open.
View 1 Replies View RelatedAfter every restart pc release ip address.
View 4 Replies View RelatedOver the past few days I've been having a problem with my internet connection.
I connect to my home wifi network and will have excellent signal strength, but after about 20 minutes or so, I will lose internet access, but will stay connected to my wifi network. If I join my neighbor's wifi network I will have the same issue.I will connect to a network, and while still connected, I will suddenly lose internet access (signal strength will remain the same). Switching networks doesn't correct the problem.
When I lose internet, I can disconnect from the network and reconnect mere seconds later and will have the internet access back again.I have reset the modem/router and my computer numerous times but the problem does not go away.
I lost it on my old laptop. Figured it was time to get a new computer anyways, we bought a new one, along with a Playbook. Both the new computer and the Playbook have had this problem, though they were able to fix it.They all use Wi-Fi.
View 2 Replies View RelatedThis is the second time I have had this issue happen. Here is some probably useful information:
-I have (2) HP Pavillion dv6000 laptops running on Vista
-I have (1) iPad 2
-I am using a Belkin Surf N300 router
We lost power due to a storm last week, and both of my laptops would not connect to the Internet. I could connect to the router with access saying local only. I called Belkin and they changed some information on my laptop to allow me to connect. Now, I have the same issue with my other HP laptop and again called Belkin but they could not fix the issue. I can connect to the router and use the Internet on my iPad and (1) of my HP laptops, but not my last one. Even when I connect to the router with an Ethernet cable, it says local only access and no internet connection. So I did the ipconfig /all on both laptops and here is what they say..
Laptop that does NOT connect to Internet shows this:
Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Melanie-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code]....
Can't get access to the Internet. Says "server not found" on Firefox and IE doesn't work as well.Not a modem issue I don't think, all lights are working. Called my ISP they couldn't fix the issue.I pinged my IP address I get a response although I can't ping my DNS serverI am using my cellphone so I can't install any programs on my PC.Here is the details using ipconfig / all[CODE]
View 14 Replies View Relatedcan i retrieve my old email address my oll one ass gone it is xxxxxxxxxxxxx edited by moderator: removed email address
View 2 Replies View RelatedI got a used computer from my relatives. When i enable my local area connection then it says aqcuiring ip adress for a while. Eventually it stops trying and says network cable unplugged. It worked fine at my relatives place, but not at my place.
View 14 Replies View RelatedWhen i connect VPN in server site then I can't use my Local Internet connection?
View 1 Replies View RelatedMy computer is not connected to the local area connection.even though the network cable is plugin.
View 1 Replies View RelatedTech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows Vista Home Premium , Service Pack 2, 32 bit
Processor: AMD Turion(tm) 64 X2 Mobile Technology TL-58, x64 Family 15 Model 104 Stepping 2
Processor Count: 2
RAM: 1982 Mb
Graphics Card: NVIDIA GeForce 7000M / nForce 610M, 64 Mb
Hard Drives: C: Total - 140647 MB, Free - 62895 MB; D: Total - 11978 MB, Free - 1512 MB;
Motherboard: Quanta, 30EA, 86.09, None3
Antivirus: Webroot AntiVirus with Spy Sweeper, Updated and Enabled
Computer will connect to non secured WIXFDR-117 Clear wirless but when I set any authentication security types it only connects to the modemn and not to the internet.I get a Local connection only on the networking screen.I have tried WPA and WPA2 with TKIP and AES encryptions.It also will not connect using the ethernet cable on any settings.This computer did connect to a secured network though a 3 year version of netgear but I do not know the security settings.
Sometimes for a minute sometimes all day until I reset modem/router. It never says not connected though...it always says connected and excellent signal strength but when it won't access internet I can look at my modem/router and tell by the lights its not working even though it says connected. This time even though I reset everything like normal I still can't access internet. I thought it might have been my router so I went and bought a new one and still nothing. Doesn't work wireless or through local connection. Both say connected but nothing. When I do a diagnostic I get the DNS 0x2afc and HTTP 12007 errors. Both computers won't connect so I'm thinking it has to do with my actual router settings or modem.Both Windows XP and Windows 7 laptops won't work.
View 11 Replies View RelatedI have two FTP servers in our network, one that accepts inbound FTP connections from external clients and one that will be pushing out to external clients
Ideally i want these to both use the same external IP address, so should i configure a dynamic policy NAT rule for these two servers?
When someone goes into a game (e.g. Minecraft) instead of typing an IP to join a game they simply type in [URL] and then the server gets added just the same as if you typed in an IP (123.456.789 sorta thing)
My friend used to do this on his website and it worked across multiple games, so people only entered his website and didnt need to remember the IP. if you type in [URL] in minecraft then u can add that server without the IP, thats what i mean.
To put it simply, my parents live far enough in the middle of nowhere that they have no access to high speed internet. Of course, there are always wireless solutions, but the options around here are pathetic and comparable to dialup. They were content with this; I moved back in with them for the time being and am not.y solution has been to dump just shy of $1,000 into a point-to-point wireless bridge setup that claims to have a range of 5 miles non-line-of-sight. I have one antenna set up four miles away on top of a building that has high speed internet.Unfortunately, I was a stupid fool and set that end up without enabling security, thinking that it wasn't a big deal. Nobody in that town has a mind for anything but farming and drinking. That was my mistake. Some asshole set a password and forced me to do a factory reset on the access point and now I can find no IP address. It's like it only reset halfway to factory defaults or something
View 6 Replies View RelatedI have an old laptop, XP Home with SP3, that I want to give to my kids. I am having trouble getting it to log into wireless. It does OK hardwired with an Ethernet cable to my router. The "Atheros AR5004G Wireless Network Adapter Properties," Advanced tab, the "Network Address" shows blank. It comes up marked "not present".I tried the following from an old thread.
View 4 Replies View RelatedMy wife accidently reset the password on our E4200 wireless router and did not write it down. I have tried to reset the router as well as run the set up CD - no luck. How can I recover and get my wireless network back in operation?
View 1 Replies View Related