I have two nics (one on DHCP and on the internet) and the other with static IP and connected to a PLC. Is it possible to set the later to enable the PLC to access internet resources while keeping that network arrangement.
View 1 RepliesI have two NICs and two seperated network connections on Windows Vista System. I want all visits to websites that are blocked by our Corporation LAN go to the external network, so I can use my personal emails etc.All the other applications still use corporation LAN.
1) Corporation LAN subnet: (Connection 1 - DHCP)
IP: 142.241.X.X
Subnet: 255.255.255.0
Gateway: 142.241.X.X
2) External network LAN subnet: (Connection 2 - DHCP)
IP: 192.168.1.X
Subnet: 255.255.255.0
Gateway: 192.168.1.1
I am planning the following network setup.Get a server with 2 NICs, a router and a switch ,1st NIC is connected to Internet2nd NIC is connected to a router,A router is connected to a switch,All the client workstation are connected to Switch to access the server.I believe with this setup all my client workstations can browse the internet on their local machine via server.
View 11 Replies View RelatedI have a networked PC with 2 NICs.One is connected to our business network, with a static IP address (10.38.75.xx) the other NIC (10.42.10.xx) is connected to a Controller machine.The business side of things works fine - network access & internet access works well.The intent with this PC is for a vendor to be able to RDP it (which he can) then open a browser and use the Controller's IP address (10.42.10.33) to access and control the connected machine.I am an administrator - logged in as myself, and trying to browse to this IP address, the page tries to load forever. It never times out or displays an error - just continues trying to load.At first, the vendor that was accessing this machine, when logged in as himself, COULD get the web page to open up at that IP - but he wasn't authorized to install an activeX program that needed to be installed. Logged in as myself, I couldn't get to the point where it asked to install the program.
Because I couldn't figure out how to fix this, I just set him as a local administrator as a short term fix - now he can't access the web page either. I've tried setting him back (removing his adminstrator privileges) - but now neither of us are able to access this page.
I have a quick question to ask regarding bridging two NIC/LAN ports on my home server to two LAN ports on a single gigabit router. Is this possible? Will the router have any trouble determining IP addresses? If so, is a certain router required for this to work that I am unaware of? I'm run a google search for any info on this subject but this particular question doesn't seem to have been asked that I'm able to find.
I'm essentially looking to increase any bandwidth throughput if possible for content streaming on my home network.
i am trying to use windows server 2008 R2 as a host machine, and i will be using windows server 2008 R2, and windows server 2008 serverCoreR2 as guest virtual machines. I have two NICs on my computer, and my computer has the memory, the hard drive space, and the cpu to handal this.
View 1 Replies View RelatedI want to route traffic from nic 2(192.168.2.1) to nic 1(192.168.1.1). In lame terms route the traffic from 192.168.2.10(gateway 192.168.2.1) to 192.168.135(192.168.1.1). I know how to use the route command in CMD. So how would I get the traffic from 192.168.2.10 to 192.168.1.135? I'm just not sure how I would do that with the route command. I've tried
Code:
route -p add 192.168.1.135 mask 255.255.255.0 192.168.1.1 IF 12
Also tried like 5 different ways The IF 12 is my NIC 2.
I have 2 nics in my win7 system, NIC 1 connect to leased line and NIC2 is connected to organization LAN for internet. Both the ip add are in same subnet. when both the cables are plugged in to nics, leased line link connected to nic1 goes down. It wouldn't come up untill the cable from nic 2 is plugged out.Basically i wish to be connected to both the networks simultaneously.
View 1 Replies View RelatedSo i have a server with an internet nic and lan nic. The internet nic gets its IP from the router 192.168.1.7 the lan nic uses DHCP for the network and has 172.16.1.1. I just turned on the ftp service and it works fine in the lan side but cant reach it from the ISP side. I use a dynamic dns host which is monitoring my internet ip and is correct.
View 6 Replies View RelatedOk so even though this isn't really needed, it's for a 10 user office I have two tower servers with dual nics but not the same brand (just bought a cheapy gigabit startech) to go with intel on board nic. Also my switch is also gigabit which is a trendnet teg-s24dg which does not support link aggregration.
But since I have two nics and both servers are running win2008 enterprise I want to use the other nics for throughput if possible. So to give an idea servers are doing DC/AD and fileserver DFS rep. If I turn one off the other picks up and network still functions (there is a small lag since dns has to pick up that other is not responding. So far the best I can think I can do with the extra nic is add ip's to second nics and add to dns and round robin or install NLB role to for two server cluster.
I can't really team them since they are two different brands, so what would you do or do you suggest I can do with them. Also I have a T1 and dsl going into a dual wan firewall dsl is not being used for anything. (might use it for a seperate wifi network if people need it.
I have a Linux OS running here with a broadband DSL connection. Everything here is okay. A friend of mine has a 3G modem with a slow connection (I don't know the exact speed - near dial-up).
Well, I was thinking of setting up a VPN between mine and his PC, using Hamachi. I read on LogMeIn Hamachi website (while logged in) in a page to set up a VPN, where there are three types of network:
Mesh Network In a mesh network, every member is connected to every other member. It is a typical choice when it's essential to reach every member of the network.
my power supply was fried in a storm a while back so i swapped it with another power supply, but the power supply i put in is 20pin while my board is 24. the computer runs fine but i cant connect to the internet. im assuming the pci slots arent being powered so network card isnt working, or the network card is shot. regardless, no matter which port i plug an ethernet into it wont recognize its there. my laptop works fine but is terribly slow and not good for gaming. is there any possible way i could use my laptop to connect my desktop to the internet without an ethernet cable?
View 2 Replies View RelatedI have a desktop with windows 7 and ubuntu 12.04 and a laptop with same ubuntu. My desktop is connected to wired network through ethernet cable through a switch. Is it possible to connect and share The internet of my desktop with my laptop? can I use the switch any way, because 5 ports of the switch is still free.
View 4 Replies View RelatedHow to share internet with one router with pc
View 1 Replies View RelatedLaptop connects to the internet via its wireless adapter and my wireless router. There are no problems here it's all going fine. My phone and other laptops in the house are all connected to the router with no dramas. I've currently connected my PC (which has no wireless card) to my laptop via Ethernet cable and allowed all the internet sharing settings with the hopes of using the internet on my PC (I've done this successfully in the past but it's not working now for some reason). The LAN network is Unidentified and as such won't let a connection pass from laptop to PC. Used the diagnose function on the LAN network and got this message: "Local Area Connection doesn't have a valid IP configuration".
how when it comes to networking, IP addresses etc isn't all that good but I'm computer-savvy so will be able to follow any instructions. I have access to my routers login and all that if required. A friend of mine mentioned something about DHNC or somesuch but I don't know what all that's about.
My computers are currently networked. I can share data and internet. I have a D-Link DAP-1522. How do I disable the internet from other devices? I can connect my main computer directly to the Comcast modem for access. But I don't want systems connected to the the access point - via LAN or wireless - to access the internet. i want employees to work and i also want to avoid the internet myself when not working at the main desk.
View 14 Replies View RelatedHow to share internet connection which used proxy through 24 port switch, and how to automatically get IP for other computer using sharing network
View 1 Replies View RelatedYou can access your home web cam via a secure routers web address.
How can you do the same with your home wireless printer?
How to share a internet in a switch
View 2 Replies View Relatedi have mobily usb internet connect card. that how to share from one computer to another
View 1 Replies View RelatedI am working in a idea for a project and i was wondering if is possible to program two or more NICs in a PC and make it to work as a Switch.
View 2 Replies View RelatedI know enough to be dangerous when it comes to networking, but this one has me baffled. I'm running a win 7 pc with dual nics.
I need to have 1 nic connected to a vpn and the other to be restricted to intranet access only. I can't for the life of me figure out how to accomplish this.
Once I connect 1 nic to the VPN i'm no longer visible to my lan, even if the 2nd nic is connected.
I am using a proxy server with 2 NICs for sharing internet connection to my 100 desktop users in my office. NIC 1 is connected to my dsl modem and NIC 2 is connected to a main switch and further to more. But now i want to setup a wifi network for laptop users. I have enabled ICS on NIC 1 and NIC 2 has acquired it ip automatically (192.168.0.1) so the gateway for my desktop users is (192.168.0.1). But i want to use a new gateway. For this i have installed NIC 3 but it is not acquiring the ip automatically. My Proxy server configuration is: MS Server 2003 ENT edition.
View 2 Replies View RelatedFollowing is my Hardware
Router: 3Com OfficeConnect ADSL Wireless 11G firewall
Laptop: Lenovo 3000 N200 - Vista
Built in NIC: Intel PRO/Wireless 3945BG
USB NIC: Linksys Compact Wireless G
I am trying to connect my Laptop to Media Player HDD connected via Ethernet to Router. I want to channel traffic to/fro HDD separately from that of internet to/fro laptop (to make it faster - my assumption)
I have successfully done this by using the router as a switch when I had a cable modem. But now I have an ADSL connection to internet and my internet gets kicked off while I connect these using VLAN.
What I want is best possible configuration of my hardware to access internet and play/transfer media files on my laptop
I have the setup as following on my PC:
[code]...
I use the fibre internet for almost all internet activities since the speed is fast.However, when I do school's stuff, I need to VNC to my lab's server. Hence I need to connect to school internet point. External IP cannot directly connects to my school's server.Therefore, I would need to force Windows (or VNC) to use the connection of the Wireless Ethernet card when I VNC to my lab's server. But I want to use my fibre for all other internet activities.
i have a windows 2003 server using it as a proxy server with 2 nics. 192.xxx.xxx.xxx to the LAN and 172.xxx.xxx.xxx to the internet router. although I can browse on the LAN, i cannot ping any public ip. because of that i cannot use my outlook to get my mail.
View 1 Replies View RelatedI have a PC on a crowded network that cannot handle much more bandwidth usage.I am now going to have a tons of transferring to do offsite so I added a second internet line just to deal with the influx of file transfers.I tried a dual WAN setup on my router and the performance was not improved (if it was nobody noticed it) so I said forget that idea, I only need to do these massive transfers from 1 PC so I will just add a second NIC to the machine so that the 1st NIC can maintain local network functionality and the 2nd NIC will be just for internet traffic (sending files up/down to offsite location) Essentially I just need NIC1 for handling local network, connecting to exchange etc. and NIC2 to handle files transfes to offsite location through seconday internet line.So now I have a desktop PC with two NICs. One of them built into the board, the other a pci add on nic. they are both 10/100
On nic1, there is a connection to my network 200.200.1.X which is the internal network for Exchange, local files transfers etc. This is the network i have always had connected and I have no problem connecting to my exchange server etc. (my server is providing dns/dhcp/wins/AD/MSE for the entire network)so I installed a secondary NIC and a secondary network line to the NIC2 on the machine.I set it up with an IP, a SN, a gateway and a DNSI removed the gateway from the 1st NIC.SO then I tried adding a gateway to BOTH of the NICs..This allows me to do EVERYTHING I want, however when i go to whatismyip.com and get a result, the IP it is giving me is NOT either of my static IPs (each network has a seperate internet line with a static IP). Not sure where this IP is coming from, but if i tracert google.com it says I am going out through the primary adaptor.The new IP from whatismyip.com makes no sense to me as it is not either of my static IPs, however it is very close.Would this be a situation where my ISP see's I have 2 gateways defined so it generates a 3rd external IP for some reason? Never heard of this but i am no guru.essentially I just need NIC1 for handling local network, connecting to exchange etc. and NIC2 to handle files transfers to offsite location through seconday internet line.
I'm trying to setup a server with two nics, one of which is connected to the network, and the other connected to a NAS via crossover. I've never done anything with subnetting, but I was thinking I could just set the main nic to 192.168.10.20 with a subnet of 255.255.255.0 and the other to 192.168.10.250 with a subnet of 255.255.255.240 and the nas nic set to 192.168.10.251
Am I thinking through this right, or is there a better way to do this?
Does Cisco MSE 3350 comes with two NICs. I want to configure them as a team bound to one IP address and send each to a separate 6509 switchport all in the name of redundancy and failover.
View 2 Replies View Relatedhow can share 3g usb internet connection via lan without router
View 1 Replies View Relatedi would like to share internet from my USB modem purchased from a local mobile communications provider with several other computers. how to achieve this.i will have to purchase a wireless usb router and then attach the internet dongle to it. i need to know what configurations i need to make from there. and can any router work with this usb dongle or is there a specific one that i need to purchase.
View 4 Replies View Relatede've been using Connectify to share the internet connection in our house and it was working beautifully, then it stopped after we upgraded to pro but now it's working again. I'm using a windows xp and my sister is using windows 7. We were both connected to the wireless network but none of the computers could get on the internet; so I restarted my mom's laptop (which is the hotspot) and my sis's laptop started browsing but mine didn't and it's still not browsing. And when i check the wireless status it says "Sending 786 packets, receiving 5 packets"
View 5 Replies View RelatedI have 2 ethernet cards (1 on board & another PCI ), 1 switch & 1 static ip to connet my broadband connection. I connected the broadband cable to onboard ethernet & configured the ip,subnet mask, gateway, DNS1 & DNS2. Internet connection was established. I also established an another cable between PCI ethernet card and switch. I configured the 2nd card to ip 192.168.1.1 . But when I tried to share a connection, my internet stopped to work.
View 1 Replies View Related