Home Network :: Possible To Convert Two NICs In A PC Into A Switch?
Feb 10, 2011I am working in a idea for a project and i was wondering if is possible to program two or more NICs in a PC and make it to work as a Switch.
View 2 Replies
ADVERTISEMENT
Home Network :: Simultaneous VPN And LAN Access With 2 Nics
Mar 12, 2012I know enough to be dangerous when it comes to networking, but this one has me baffled. I'm running a win 7 pc with dual nics.
I need to have 1 nic connected to a vpn and the other to be restricted to intranet access only. I can't for the life of me figure out how to accomplish this.
Once I connect 1 nic to the VPN i'm no longer visible to my lan, even if the 2nd nic is connected.
Home Network :: Convert UTStarcom WA3002G4 Into A Hub For A Home LAN?
Jul 9, 2012Following are my components at hand.
1. My super awesome desktop with the regular gigabit, on board lan card (on Win7).
2. A laptop, with wireless connectivity (again on Win7).
3. A modem, UTStarcom WA3002G4 with an internet connection from BSNL.The modem is a wireless modem.
I want to be able to connect the laptop and the desktop in a single LAN connection, so that
i)I may play NFS Most Wanted on both the laptop and desktop through the LAN play.
ii) I may share files and folders, fast and without any hassles.
Using 2 NICs To Connect Network
Feb 11, 2011I have a networked PC with 2 NICs.One is connected to our business network, with a static IP address (10.38.75.xx) the other NIC (10.42.10.xx) is connected to a Controller machine.The business side of things works fine - network access & internet access works well.The intent with this PC is for a vendor to be able to RDP it (which he can) then open a browser and use the Controller's IP address (10.42.10.33) to access and control the connected machine.I am an administrator - logged in as myself, and trying to browse to this IP address, the page tries to load forever. It never times out or displays an error - just continues trying to load.At first, the vendor that was accessing this machine, when logged in as himself, COULD get the web page to open up at that IP - but he wasn't authorized to install an activeX program that needed to be installed. Logged in as myself, I couldn't get to the point where it asked to install the program.
Because I couldn't figure out how to fix this, I just set him as a local administrator as a short term fix - now he can't access the web page either. I've tried setting him back (removing his adminstrator privileges) - but now neither of us are able to access this page.
Dual Nics For Accessing Network And Dedicated NAS?
Nov 24, 2011I'm trying to setup a server with two nics, one of which is connected to the network, and the other connected to a NAS via crossover. I've never done anything with subnetting, but I was thinking I could just set the main nic to 192.168.10.20 with a subnet of 255.255.255.0 and the other to 192.168.10.250 with a subnet of 255.255.255.240 and the nas nic set to 192.168.10.251
Am I thinking through this right, or is there a better way to do this?
Home Network - VLAN Without Switch?
Feb 7, 2012new to networking, I can not fully understand concepts like VLAN, so I would like to know whether it is possible to have a a few VLANs without a switch but over a bridge (created under linux - connecting a few virtual machines).
View 1 Replies View RelatedHome Network :: WAP Works - Switch Doesn't?
Jul 21, 2012My cable modem and router are in a closet. From there, wires run through the house to multiple locations. One of the locations has had a wireless access point (WAP) installed which has worked flawlessly. I want to put another device at that location that doesn't have wireless capability, so I tried to connect a switch. The switch does not connect. When I disconnect the cable from the WAP and plug it into the switch, the light on the switch port that would indicate a connection does not come on. When I then connect the WAP to another port on the switch, the light on its port does come on but it does not see the router. I've tried multiple cables (I even tried a crossover cable) and I've tried a second switch with the same result. When I plug back into the WAP, it works fine again. The switch works fine at other locations in the house.
One more thing - When I bought the house, the wire to this particular location was unterminated. I had never done any wiring before but I decided to try to do this myself. So, I read up on the process and bought the necessary tools. When I stripped the wires, I found that the twisted pairs were not just twisted (as they were in the patch cable I practiced on) but each pair was in a single strand of insulation (I'm not sure exactly how to describe this but there were four strands of plastic, each with two wires packaged inside.) I didn't know how to separate the two wires that were packaged together so I wired the connectors with all four color - color/white pairs next to each other. I know that's not the standard. But from what I read, as long as I wired both ends of the cable the same way, everything should work. And in fact, it did for connecting the WAP.
Switch And Router For 24-port Home Network?
Jul 6, 2011So I am contemplating the setup for the network in my new home, how to connect 24+ ethernet ports in the house to a single network. I was thinking of getting a nice dual-band wireless router, but those usually only come with 4 or so lan ports. How would I then utilize a large 24- or 48-port switch to connect everything to the router?
View 2 Replies View RelatedHome Network :: Switch Need To Be Located Where Patch Panel Is
Sep 18, 2011I am renovation my own house, and I have started to hard wire for the network/s, but I am also trying to incorporate so much more than any previous “wireless” setup I have had, well I am a bit confused to say the least.I would like to set up a home network and media server system which includes:Internet browsing (multiple rooms and wireless) File sharing, printer sharing, scanner etc Music/Video sharing/streaming, TV etc.I have started wiring (we are renovating) with Cat5e, and have just replaced the old POTS (telephone) wiring with Cat5e and taken the individual telephone wires (including the incoming telephone cable) back to one central connection unit in a network patch panel. This has improved the speed of my DSL download connection speed from 1.2mbs to 6.2mbs. unreal!, so that did get me a bit fired up!I am currently wiring data points (Cat5es from each room) back to the same panel, but to be honest I am not really sure where to go from there! Also, I have wired Sat cables back to this point ready to be connected to sat TV (dish) in case if we get it. This patch panel is in a small passageway that goes through to the garage from the house. It is conveniently located next to the mains board which I have just replaced. My original idea was to put any extra needed equipment in the same location, but looking at it, I think that I may have to think again, for there is little room. I have found a small alcove in the upstairs games room which has a shelf, and which could take any hardware, also it will be dust free (unlike the place leading to the garage). I can run as many cables as needed from this location to the patch panel, but obviously I would like to know how many, as I am not familiar with networking on this scale, my only other experience being wireless setups. For example, would the switch need to be located where the patch panel is, or else can it be on the shelf with the other stuff? (away from the panel), and the existing D-link 4 port router?? is this no longer required?Im presuming i will need an old PC or some sort of media storage device here too... no ideas with this either. Have tried asking three different computer stores, got three different answers...?!
Have I dropped a clanger wiring to the passageway, when infact any server/switch or whatever wont be in the same location?Also, I am planning on getting a MAC book, and would like to use this on the system sometimes (might not be relevant), just thought to mention. And, I was thinking of trying Linux, as I am fed up with all the windows problems. But not sure if that is a good idea either.We have TVs in the (when its finished) media room, also three other areas, which I would like to get connected so that they will be able to get either TV or watch a film from storage wow this is getting complicated and if it matters I do have a PS3, which we only really bought to use as a TV storage system/recorder.
Home Network :: How To Measure The Router Or Switch Capacity
Sep 25, 2011how to measure the router or swith capacity?
Ex: Actually my problem is, i'm using Dlink 8 port switch, and 40 computers connected indirectly to that switch, few times getting issues like packet drops, internet connecting & disconnecting etc. so i want to know either the switch is capable or not.
Home Network :: Why Used CSMA / CD In Star Topology Switch
Mar 29, 2011As we know when multiple PCs share same link"line" they will need multiple access protocol like CSMA/CD to protected from collision,,share link like "bus topology" need multiple access protocol "CSMA/CD" but in star topology"switch not hub" PC0 connect to port0 ,,PC1 connect to port1 PCn connect to portn then every PC connect to separate port ,, and the switch mange the network"by using MAC" then why we need to used CSMA/CD in star topology"switch"???
View 9 Replies View RelatedHome Network :: How To Connect Multiple PCs To Modem Via Switch
Aug 21, 2011I have Zyxel Modem configured in bridged mode with static IP from ISP. I want to connect multiple PCs to modem via switch so that each PC use the same configured Public IP address to use the internet. For this (generally) I would need to configure NAT for that IP. But I want to know that will it work under bridged mode or not?
View 8 Replies View RelatedHome Network :: Connecting A Router To Switch To Use Internet?
Mar 19, 2012I have 24 port switch which is already connected to internet through static IP. Now I want to use a router as a wireless device to use internet. How do I connect router to switch?
View 3 Replies View RelatedHome Network :: Airport Extreme And Wpn824 As Switch?
Aug 29, 2011Currently I have the modem into an apple airport extreme, this provides WiFi to the whole house + has a NAS drive connected to it...I have two x box's on the top floor of the house... One is currently wired to one of the airport extremes LAN ports...Now what I am trying to achieve - the second xbox is an old one so needs to be plugged in by cable too... (and I don't want two cables through the house). I have an old Netgear wpn824v2 router. Now so far I plugged the ethernet cable from airport x into one of the lan ports on the Netgear...Then both xboxs are wired into the netgear... The netgear has basically nothing setup on it - no security etc... ip address is on the same network as DHCP router.Netgear has upnp and dhcp disabled...Now stand alone one xbox at a time, the connection is actually faster than I have ever achieved, the full 50mb - but if i wire up my laptop to the netgear and use the internet at the same time the xbox lags like hell, so obviously not tried both xboxs together yet as it will just cause lag!
*modem* ----- wired to ---------
-----airport extreme(provides WiFi to house)* ----- Wired to --
-----*NAS drive* --- AND---
-----*top floor to the second router - Netgear* ---wired to ---
----*2 Xbox's
Cisco Switching/Routing :: Convert 1941 Router To POE With 4 Port Switch
Dec 20, 2011I have a Cisco 1941 K9 Router. I want to add POE functionaltiy to it. Specifically I want a 4 port EHWIC POE switch to power a couple of AP's.
This is what I understand I need; Upgrade/replace the internal power supply with PWR-1941-POE power supply, This is supplied with a fan replacement also (not yet purchased).buy 1 x EHWIC-4ESG (4 port switch)buy 1 x ILPM-4 (inline daughter card / power supply board) I think the real question here is the 4 port switch... there are two types available one is EHWIC-4ESG=the other is EHWIC-4ESG-P=
Is there any difference between these two switch modules? or are they the same and the more expensive "P" version is simply supplied with the ILPM-4 daughter card for POE?
I have recieved via courier today 1 x EHWIC-4ESG, and found a ILPM-4 on ebay for a good price. WIll this provide POE through the switch EHWIC-4ESG?
Home Network :: Managed Switch Selection For Video Streaming?
Jul 27, 2011looking to pick a good managed gigabit switch for my central media server implementation.I will have probably 10-12 tvs connected to this along with other things like ip pbx extensions, music streamers, ip cameras etc.Now I can imagine about 2-3 tvs simultaneously streaming HD quality movies. In that case, I am assuming I will need a minimum 150-200mbps throughput switch. Is my assumption wrong?I have been looking at some switches which seem nice and relatively inexpensive but the throughput is much lower than that.If I wouldnt need that kind of throughput then can you explain me how do I come up with my max limit.I initially thought that since its going to be a gigabit switch it would be able to handle that kind of traffic through all its port at once, but I guess thats not a correct assumption. Throughput is what reall dictates simultaneous maximum? Am I correct?
View 1 Replies View RelatedHome Network :: Using Switch Causes Local 1080p Streaming To Buffer?
Sep 25, 2011I began having a problem with streaming 1080p content from my media server to a router, wired to a switch that serves a few devices in my home theater (including a HTPC, my Boxee Box). Every 15 seconds movies have to buffer. After a while, I narrowed it down to the switch, since wiring the Boxee Box straight to the router caused the movies to run perfectly.Logically, I thought the switch was the problem, since I really made no changes on my network/DD-WRTRouter other than running a Minecraft server (which shutting that down made no difference in network performance). I ordered a brand new gigabit switch, same problem. Pinging the BoxeeBox returns 0 packet loss whether it's connected to the switch or router, but movies still play perfectly fine when directly connected to the router. Different cables didn't work.
I thought maybe the other devices on that switch were causing some sort of conflict.changed the BoxeeBox's static IP just in-case, unplugged every other device from the switch so that only the BoxeeBox and Router were connected to the switch. It worked fine! Yay! Tried a different cable, still worked fine. Great, I thought, so the problem was never my switch... plugged the old switch back in, then the problem returned. Ugh. Changed back to my new switch (each time power cycling all of the network devices) and the problem persisted, even with the SAME EXACT setup I just had a few minutes previously that worked fine. Tearing my hair out at this point.Since that moment I still haven't been able to reproduce a perfect stream unless the BoxeeBox is directly connected to the router. This doesn't make ANY sense as I had this setup running perfectly fine since November 2010. I am COMPLETELY out of ideas other than running multiple ethernet wires to that drop or running all the other devices on wireless.
Linksys E4200 - How To Install Router To Switch On Home Network
Jul 15, 2011Have a home network: 2 desktops & 2 printers wired to router (linksys e4200) Want to add nettalk for VOIP telephone service. All ports on the router are taken. What to do?
View 1 Replies View RelatedHome Network :: Multiple Router Networking Versus Adding A Switch?
Apr 22, 2011on my home network I currently only run an Airlink101 AR675W router. We have a couple issues with this. The router for one is in my basement and there are points in my house that have low signal strength, especially upstairs in the far corners of the home. Second is I am currently running my home PC as a media center but it is set-up wirlessly so streaming is clunky and jittery. Also on this network is 3 X-box's wired, a PS3 running wirless, 2 PC's wired in, 2 wirless laptops and the afore mentioned wirless PC. A lot of weight for the network. What I want to do is move the router upstairs, hardwire it into my wireless PC (the one doing the streaming) and connect a second router (an identical make and model I am buying this weekend) downstairs which will be basically used as an "expansion" of the wirless and a switch for the hardwired devices downstairs. would this be better than simply moving the wirless router upstairs (hardwiring my PC) and putting a 5 or 8 port switch in downstairs for the X-box's and 2 wired PC's there?
View 2 Replies View RelatedD-Link DIR-615 :: Connect 2 Wireless Modem Routers + Switch In Home Network
Nov 14, 2011I have 3 pieces of hardware:
1. Green Packet DX-230 WiMAX modem with router
2. D-Link DIR-615 ver G2 (from my ISP)
3. D-Link 8 port desktop switch
I previously used the DIR-615 with my high speed broadband connection. However I had to move to a new house and here I can only get WiMAX. I want to...Place the WiMAX modem upstairs to serve as modem and wireless access point Have the DIR-615 function as the main router and firewall (downstairs) Use the switch to connect all the rooms in my house FYI my WiMAX modem has no connection configurations. I just plug it in and it'll connect automatically to the WiMAX signal. It has 2 LAN ports but no WAN port. From my understanding of networking, I have to turn off DHCP on my WiMAX modem, put it in the same IP range as my DIR-615 (192.168.0.100-199), and disable UPNP and NATPMP. After this I'm stuck.How do I tell my DIR-615 to use the WiMAX modem as it's WAN connection?Should I reserve an IP for the modem in my DIR-615?
Linksys Wireless Router :: WNT160N Made A Switch On Our Home Network
Feb 7, 2012Our desktop is connected to a cable modem and I always connected wireless with my laptop. When I changed my linksys wireless adapter I tried to get on the internet and it would not connect to the linksys router, so I then do not know exactly what I did,but the result was that i finally had a connection. That was a month ago and I finally looked at the network mapping after I noticed the desktop was on a lan network and the cable connection was flagged. Apparently, I created something called a switch with the router and now I have a whole new network in my name that has the cable connection.
View 2 Replies View RelatedHome Network :: Good Switch That Can Handle Stress Of Massive Data Transfers
Jan 24, 2012I plan on starting a high speed LAN for my Gaming LAN party's. We send 100's of GB of data over our LAN networking when we do this, so i need a good switch that can handle the stress of the massive data transfers. It needs to be a gigabit switch and at least 8 RJ45 ports.or is there a different one i should get all together? i cant spend a butt load. url...
View 3 Replies View RelatedConvert 802.11a To 802.11g Wireless Network Device?
Feb 13, 2013It is possible to convert 802.11a to 802.11g wireless network device. I wireless outdoor cpe which is work on 802.11a...i want to convert it to G network
View 3 Replies View RelatedConvert Cable Network To Wireless Net?
Aug 1, 2011i want change my Cable Network Station to Wireless Network
View 1 Replies View RelatedCisco Switching/Routing :: Convert Switch Port To Router Port On 6500
May 8, 2012On the supervisor card of a cisco 6500 series, according to the following link, [URL] it only has 2 uplink ports on the card. Would I be correct in assuming that I only have those to ports that I can configure IP addresses on?
The cisco that is being devlivere is coming with a 48 port switch and 24 port fibre switch. Could I change any of those ports into a router port and configure IP addresses on those?
The supervisor card is a ws-sup-720-3b the 48 port switch is a ws-x6748-ge-tx the 24 port fibre switch is ws-x6724-sfp
Home Network :: Advanced Home Network Setup (3 Subnets) And Port Forwarding?
Feb 24, 2013I have a Time Warner Cable business class service with no static IP, with a wireless modem which is plugged to a CAT5 distribution panel. On the jacks (2 other rooms on the house) I have a Linksys E3000 and a Linksys Valet router for signal boost and gadgets usage (TV, cameras, etc).The main router (TWC) has it's own external IP which TWC assigns to me and internally distributes via DHCP the range 192.168.0.x. With that said:
- The E3000 has a 192.168.0.6 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The Valet has a 192.168.0.7 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The main router has the 192.168.0.1 as the gateway and web-interface
Whenever I connect something to the E3000, it is distributing the 192.168.1.x range and the valet 192.168.2.x range.That works perfectly for my home based business until I decided to use more stuff on the network such as a IP printer, IP cameras, etc.
- The IP cameras are connected to the E3000 due to signal strength and I have manually assigned them the 192.168.1.15 and 192.168.1.16 IPs and ports 9001 and 9002.
- The printer is connected to the E3000 and I have manually assigned the IP 192.168.1.30.
Issue 1: Port forwarding On the main router (TWC - UBEE) I have tried to setup a port forwarding by informing the Local IP as 192.168.0.6 (E3000 IP), Internal Port 0, Public Interface IP (0.0.0.0), Ext Start Port 9001, Ext End Port 9001, Protocol - Both, Enabled Yes. On the E3000 I did the same config (screen shot attached e3000.png).This is not working properly. I can't get into the camera.
Issue 2: Printer/ The printer is only accessible if I connect to the E3000 (because it is on the 192.168.1.x network)
Issue 3: How to configure all the devices on the same subnet? If I want everyone to be on the 192.168.0.x network, how to configure properly the E3000 and the Valet? I have tried to force them into the same network but it would not work properly. It would not get an IP from the UBEE router (main).
Home Network :: Need To Extend Reach Of Wifi Network At Home
Oct 20, 2011Here's the layout: Cable modem in the basement. Several devices in which I'd prefer a wired connection in the basement. Upstairs on the 1st and 2nd floor of the house are many devices in which wifi is fine or preferred.Here's the problem: As you might guess, wifi is weak upstairs and certainly on the patio and 2nd floor. I have an access point upstairs that I've experimented with but it is flaky.
View 1 Replies View RelatedHome Network :: Install A Wireless Network In Home Environment?
Nov 10, 2011How to install a wireless network in home environment?
View 6 Replies View RelatedHome Network :: Need Input On Network At Home Newly Wired
Jan 14, 2012I am a new student in networking, taking the CCNA courses, and now want to rewire my home. I currently have a cable modem and E2500 setup running my network. I want to get the modem and router out of my computer room and in the basement where the cable enters the house. I want to do this to clean up the computer room wiring a bit and to run line drops to different rooms in the house where the internet will be utilized.Currently there are two PC's, a laptop, a tablet, sometimes a phone, and an XBOX using the internet. I want to get my printer back up and running on the network but thats another story. Only one PC is currently hardwired. I would like to run two cables into the room with the PC and XBOX that are currently using wireless, at least two into the computer room for the PC and network printer, and one or two into the living room for the blue ray player and possibly an internet tv.
View 1 Replies View RelatedHome Network :: Can't Get D-Link DGL-4500 To Accept Home Network?
Sep 10, 2011I have a D-Link DGL-4500 router and my landlord recently ungraded our internet connection. However, now I get this error message when I try to hook it up to the ethernet hub,"The addressing of the Internet side learnt thru DHCP conflicts with the addressing selected for the LAN side. Internet communications will be disabled until you have changed the LAN side addressing to resolve the problem."
View 3 Replies View RelatedHome Network :: Playing MPEG-2 File In Webpage From Home Server?
Dec 20, 2012I have setup a webserver on my home PC and I have forwarded port 80 on my router to the IP adress of the PC that is running the web server. The web server is working great; I can get to my web pages from outside of my home by going to http://MyIpAddress/Anyway, the problem is with the Windows Media Player plugin I'm using. I want to embed 6GB MPEG-2 videos into my web pages. I have some videos on my PC and I want to be able to watch them remotely by connecting into my web page. It works fine when I'm at home; other PCs can connect and play the videos no problem. The problem is when I'm at work. When I'm at work, I go to my web page (via my IP address in a web browser) and the Media Player plugin says "Connecting" for a minute, then it says Ready, but the video will not play. I tried using a smaller, AVI file (680 MB) instead to see if the problem was streaming such a large file, but the video still would not play.Do I need to foward more ports on my router so that Windows Media Player can connect back and get the information it needs?
View 4 Replies View RelatedHome Network :: Use Internet Of Workplace From Home Via Dial-up Connection?
Oct 3, 2011I have ADSL modem in my workplace that is connected to a switch and other workplace computers are connected to this switch so the ADSL internet is shared in LAN network.(in each of computer I set default Gateway to ip of modem .....)I want to dial my workplace from home and then use of workplace internet or connect to workplace LAN.(such as VPN or Port Forwarding or I don't know...)
View 11 Replies View RelatedHome Network :: Latest Ethernet Cable For Home Wiring?
Sep 20, 2011I'm currently in the process of buying the new property, which is in the build process and would like to put some cables across 3 floors, which would be connected to the router downstairs.
View 3 Replies View Related
