Convert Cable Network To Wireless Net?
Aug 1, 2011i want change my Cable Network Station to Wireless Network
View 1 Repliesi want change my Cable Network Station to Wireless Network
View 1 RepliesWould this work ?. also, on the back of the modem is a rectangular, not the typical, usb slot. I cannot move the modem because it is connected to the wall. I don't want to use an extra long wire either. What do I need to buy so I can use the wired modem, as a wireless one on my pc downstairs ?
View 6 Replies View RelatedI have a cable internet.There is no other hardware that connects to the Cable.There is no modem or router.Just the RJ45 cable that I plug in to my laptop and go online.Now,I want to convert this to wifi.what router/modem will I require and possibly with the model number and something thats low in price.I will use only one laptop and no intention of multiple user.I dont intend to use printers either.I am using windows 7.The network adapters that are installed in my laptop are: Intel Centrino wireless N 1030.Microsoft virtual wifi miniport adapter and Microsoft virtual wifi miniport adapter #2,RealtekPCIe FE Family Controller?
View 1 Replies View RelatedAm trying to patch an RG8U cable from a WiFi dish to an ethernet cable for connection to a router.
View 8 Replies View Relatedeasiest way to convert a cat 5e crossover cable to make it a straight? I have 2 PCs networked & am introducing a router & need to covert the cable without having to rewire it if possible.
View 1 Replies View RelatedIt is possible to convert 802.11a to 802.11g wireless network device. I wireless outdoor cpe which is work on 802.11a...i want to convert it to G network
View 3 Replies View RelatedI am working in a idea for a project and i was wondering if is possible to program two or more NICs in a PC and make it to work as a Switch.
View 2 Replies View RelatedHow do I convert an old WRT 54G 2 to a wireless bridge.
View 1 Replies View RelatedFollowing are my components at hand.
1. My super awesome desktop with the regular gigabit, on board lan card (on Win7).
2. A laptop, with wireless connectivity (again on Win7).
3. A modem, UTStarcom WA3002G4 with an internet connection from BSNL.The modem is a wireless modem.
I want to be able to connect the laptop and the desktop in a single LAN connection, so that
i)I may play NFS Most Wanted on both the laptop and desktop through the LAN play.
ii) I may share files and folders, fast and without any hassles.
is it possible to convert a 3G donugle into a hotspot?? i tried converting my LAN into a hotspot and it works. wondering if it is possible to do the same with my 3G doungle.
View 1 Replies View RelatedMy daughter is going to university. An Ethernet connection is provided but she wants to work wirelessly. Is there a gadget to attach to the Ethernet port that will create a wireless signal for her to connect her iPad and PC laptop?
View 4 Replies View RelatedI have a wired IP phone connected to my company network, in my home office. How can I convert this to wireless so I may use other rooms in the house to work in?
View 1 Replies View RelatedIs it possible to convert autonomous access point Cisco 1262 to LAP?
View 9 Replies View RelatedI'm trying to upgrade my existing Netgear wired router to a Netgear N600 wireless router. I was really hoping just to replug in everything and go. But because the wired router is setup for 192.168.1.1 when I plug in the wireless router it thinks nothing is plugged in because it too wants to use that IP address. How do I disable the wired settings
View 7 Replies View RelatedI have an ADSL router like the one showed below & internet from the provider via a RJ45 cable.
I need to share the incoming internet from the RJ45 cable to the remaining three RJ45s & over the wireless. How to configure the router to get this working?
Also the internet provider needs me to authenticate via their default webpage before I can access the internet & I can say it doesn't have any MAC binding.
watch netflix on my tv,which has netflix,but has a Ethernet connection,and must use a rj45 cable,can I change it over to a wireless signal,so I won';t have to use a cable?
View 1 Replies View RelatedHow do I convert my wireless router to a wireless AP (Access Point)?While connected to the main router go Start then Run in XP - (Windows key plus R in Vista and Windows 7), then type in the following, including all the spaces:- cmd /k ipconfig /all -- then press Enter and from the black form that shows up, take a note of the numeric code beside the word "gateway" -- usually something like 192.168.0.1. Type exit to close the black form.Now connect the router to be converted only to a computer via network cable and log in Setup the wireless security Disable the DHCP and change the LAN IP to match the gateway IP but ending in something like .253 Finally connect one of the four LAN ports of the AP to the main router, do NOT use the WAN port.
View 4 Replies View RelatedI want to do wireless printing and wonder whether, in stead of buying a new printer, I can do something to convert my Brother DCP 7020 for wireless use.
View 2 Replies View RelatedHotels have wired LAN connections and not wireless. Is there a device that will plug into the ethernet cable and offer wi-fi for more than one laptop/smart phone in the hotel room?
View 1 Replies View RelatedI would like to know is it possible to convert a Cisco Aironet AIR-AP1042N-x-K9 to LAP ?
View 3 Replies View RelatedI have a Belkin f5d7234-4 lying around at home. I also have a Panasonic TV which requires a proprietary wifi donge to get a wireless signal, so my question is, can I use the router to recieve my house Wifi (broadcast by my new NetGear Router) and send it out through its Ethernet port to the TV?
I checked, the router doesn't have ddwrt support, I'm new to hacking around with routers and networks, so I don't know how to do this, I see how it is logically possible
I have an equipment which has LAN port for wired connectivity to the computer. I can connect 10 such equipment thru LAN to the computer & display the data of all the equipments on computer screen. This LAN network I wanna convert to Wi-fi/wireless.
View 4 Replies View RelatedI have an 1142 running capwap c1140-k9w8-tar.124-23c.JA4 that I am wanting to convert to an Autonomous AP.However, the AP does not seem to have an archive exec command to tftp downoad an new IOS.Is there another procedure that should be used ?
View 7 Replies View Relatedhow to convert a 1602i AP from lightweight mode to autonomous?
View 3 Replies View RelatedIs it possible to also upgrade the 1310 series cisco ap's from autonomous to lwap without using the upgrade tool, if so what procedure do I follow? The upgrade tool required to have telnet enable on the controller which I can't break the policy
View 1 Replies View RelatedAIR-SAP1602I is a Standalone AP (Fat-AP), can we convert it to Ctrlr-based AP(Thin-AP) via install another IOS ?!In contrast, can we convert AIR-CAP1602I to be a Standalone AP ?!
View 5 Replies View RelatedWe have a couple of smaller remote locations running cisco 1811W routers (built in switch ports & wireless).Now I have been tasked with determining if the wireless portion can be converted to Lightweight or not; if so what is required.
I am running
WCS 7.0.230.0
WLC 5508 (same code)
i have a air-lap01131-ag-e-k9 that was originally in lightweight mode and configured with a controller, but i am in the process of wanting to convert to autonomous mode, i am having issues with connectivity to the AP from my laptop.
i have followed numerous guides on this forum, i have successfully
downloaded correct firmware
renamed the firmware to .default
placed this in root of tftp server folder
connected laptop via console to view output
connected laptop via Ethernet to Ethernet port of AP
changed static ip on laptop to 10.0.0.2 set subnet mask to 255.255.255.0, default gateway to 10.0.0.1
held reset button on AP when applying power and waiting for radio light to flash red
AP gets a IP address then of 10.0.0.1
But even though both laptop and AP are in the same subnet, i am unable to ping the AP from my laptop and it doesn't start the tftp process
I have disabled firewall etc, and tried with both crossover and straight through cable, it seems there is something missing at this last stage, i even tried on a second laptop but that would not ping either, am i missing something.
I have an AP 1141N-A-K9, from autonomous system, with this IOS ( c1140-k9w7-mx.124-21a.JA1), and a WLC 5508 with Version 7.X
I want to convert this AP to lightway to use with this controller.
I download de Version of IOS (c1140-rcvk9w8-tar.124-21a.JA2.tar) from cisco and the upgrade tool. but when I start the process in the upgrade tool the result is "this version is not supported by the upgrade tool", it pass all the requested information but show this error at the end.
Is it possible to convert an Autonomous AP 2602i to Lightweight just changing firmware as the first generation Aironet APs?
View 2 Replies View RelatedApparently converting autonomous 1142N to lightweight is not supported by ether WCS 7.0 or the Upgrade tool. The option is to do it manually with CLI, but there is about 200+ AP's that need converting. We can't do them all at the same time. We have to do it building per building.
View 4 Replies View RelatedI'm building a security camera system,which can connect to internet to be viewed from away.The camera receiver connects to the modem with a Cat 5 ethernet cable,which results in a cable running across the room. My modem is a wireless type,but the camera receiver only has cable support it seems.
Is there a device that I can use to get rid of the Cat5 cable in this scenario?
some days ago I succesfully converted AIR-LAP1041N (lwapp) to AIR-AP1041N (autonomus).I used c1140-k9w7-tar.124-25d.JA1.tar which is available to download in Download Software Section for this AP.But there are any autonomus to lightweigt firmware for this AP.I tried to use c1140-rcvk9w8-tar. 124- 21a.JA2.tar for 1140 but AP hungs after that. How can i back to LWAPP version in 1041?
View 7 Replies View Related