Convert Ethernet Port Into Wireless?

Sep 3, 2011

My daughter is going to university. An Ethernet connection is provided but she wants to work wirelessly. Is there a gadget to attach to the Ethernet port that will create a wireless signal for her to connect her iPad and PC laptop?

View 4 Replies


ADVERTISEMENT

Convert A Ethernet Port To A Wireless Modem?

Sep 16, 2011

watch netflix on my tv,which has netflix,but has a Ethernet connection,and must use a rj45 cable,can I change it over to a wireless signal,so I won';t have to use a cable?

View 1 Replies View Related

How To Convert A Ethernet RJ45 Port To A Wireless One

Aug 7, 2012

Hotels have wired LAN connections and not wireless. Is there a device that will plug into the ethernet cable and offer wi-fi for more than one laptop/smart phone in the hotel room?

View 1 Replies View Related

Security Camera System - Convert Cat5 Ethernet To Wireless?

Aug 21, 2011

I'm building a security camera system,which can connect to internet to be viewed from away.The camera receiver connects to the modem with a Cat 5 ethernet cable,which results in a cable running across the room. My modem is a wireless type,but the camera receiver only has cable support it seems.

Is there a device that I can use to get rid of the Cat5 cable in this scenario?

View 2 Replies View Related

Cisco Switching/Routing :: Convert Switch Port To Router Port On 6500

May 8, 2012

On the supervisor card of a cisco 6500 series, according to the following link, [URL] it only has 2 uplink ports on the card. Would I be correct in assuming that I only have those to ports that I can configure IP addresses on?
 
The cisco that is being devlivere is coming with a 48 port switch and 24 port fibre switch. Could I change any of those ports into a router port and configure IP addresses on those?
 
The supervisor card is a ws-sup-720-3b the 48 port switch is a ws-x6748-ge-tx the 24 port fibre switch is ws-x6724-sfp

View 3 Replies View Related

Lan Port For Wired Connectivity - Convert To Wifi / Wireless?

Oct 19, 2012

I have an equipment which has LAN port for wired connectivity to the computer. I can connect 10 such equipment thru LAN to the computer & display the data of all the equipments on computer screen. This LAN network I wanna convert to Wi-fi/wireless.

View 4 Replies View Related

Convert Rg8u Wifi Cable To Ethernet?

Oct 13, 2011

Am trying to patch an RG8U cable from a WiFi dish to an ethernet cable for connection to a router.

View 8 Replies View Related

Linksys Wireless Router :: E3000 Ethernet Port 4 And Internet Port Not Working

Jul 3, 2012

There is no "blinking light" indication on my E3000 at the Internet (Yellow label) and Ethernet port no 4. I tried plugging in 2 cables at all of the ports. I got the blinking indication at Port 1 through 3. The same cable's have no response at Port 4 and Internet port. As a result my I am not able to connect to the internet.

View 2 Replies View Related

How To Convert A Rj45 Port To Receive Wifi

Jan 19, 2011

is there an adapter ( wifi reciver ) that plug into RJ45 port so RJ45 can receive wifi signal ?

View 1 Replies View Related

Cisco Switching/Routing :: Convert 1941 Router To POE With 4 Port Switch

Dec 20, 2011

I have a Cisco 1941 K9 Router.  I want to add POE functionaltiy to it.  Specifically I want a 4 port EHWIC POE switch to power a couple of AP's.
 
This is what I understand I need; Upgrade/replace the internal power supply with PWR-1941-POE power supply,  This is supplied with a fan replacement also (not yet purchased).buy 1 x EHWIC-4ESG (4 port switch)buy 1 x ILPM-4 (inline daughter card / power supply board) I think the real question here is the 4 port switch... there are two types available one is EHWIC-4ESG=the other is EHWIC-4ESG-P= 

Is there any difference between these two switch modules? or are they the same and the more expensive "P" version is simply supplied with the ILPM-4 daughter card for POE?
 
I have recieved via courier today 1 x EHWIC-4ESG, and found a ILPM-4 on ebay for a good price.  WIll this provide POE through the switch EHWIC-4ESG?

View 7 Replies View Related

Ethernet Port Doesn't Recognize Any Ethernet Cord

Dec 26, 2011

I've had trouble connecting to my own internet and have no wireless. I'm using my neighbor's wireless and it's really slowing her's down. I've tried restarting my laptop (it usually works) and then reinstalled the device under "device manager". It's not the cord, I've checked with my neighbor's laptop and it works fine.I use a Sony Vaio VGN-NS140E with Windows Vista SP2.

------------------------------------------------------------------------
{ipconfig /all} This is while I only have an ethernet plugged in and no wifi connection.
Windows IP Configuration
Host Name . . . . . . . . . . . . : FairyHo

[code]....

View 7 Replies View Related

Ethernet Port Not Recognizing Ethernet Cable?

Apr 30, 2011

I have a Dell XPS M1530 with Vista 32 bit. When i plug in a cable i get nothing, no error, and the comp does not recognize that a cable has been plugged in. I think that this started after my Hard drive failed and Dell replaced it but i'm not positive. No errors (? or !) in Device Manager and I can't find the Marvell 88E80XX 10/100 Ethernet Controller in device manager. I have attempted to Reinstall the drivers. The wireless is still working. I have one Light to the right of the port that is on all the time solid but no flashing with the cable in or out.

View 14 Replies View Related

No Ip For Wireless Or Ethernet Port

Apr 15, 2012

A few days ago, my lappy crashs (Blue Screen) and when i managed to get the page showing, start windows normal mode, safe mode or last know good config, i select the last known good config, But when i get into the windows, i have these message on my network icon saying limited or no connectivity. I run ipconfig on cmd, and got all

0.0.0.0

i have seen some of the troubleshoot advice on other thread on ipconfig/release, flush and renew but it doesnt works i tried to reinstall my drivers, but still the same, There wasnt any ! on my device manager, and i have selected the internet protocol, IP address and DNS, Automatically but still, it doesnt works

View 1 Replies View Related

Cisco WAN :: Nexus 5010 Fixed Port - Group C (17-20) Encrypted Ethernet Port

Oct 14, 2012

if I can use the encrypted port as unencrypted ethernet ports? url.. Each individual port on the Cisco Nexus 5010 switch is numbered, and groups of ports are numbered based on their function. The ports are numbered top to bottom and left to right.There are 20 to 28 ports on the Cisco Nexus 5010 switch, depending on which GEM is installed.
 
The 20 fixed ports form group 1 and are named 1/port_number. Ports 1 through 16 are unencrypted Ethernet ports. Of these, ports 1 through 8 are 10-Gigabit Ethernet and 1-Gigabit Ethernet-capable ports. Ports 17 through 20 are encryption-capable Ethernet ports.

View 1 Replies View Related

Cisco WAN :: 857 ADSL Possibility To Configure Fast Ethernet Port As WAN Port

Apr 4, 2012

I have a Cisco 857 router which i used for Internet connection with RJ11 connectior (ADSL0 POTS) but now the ISP has changed the internet link with PPOE type and the ONT connection is RJ45 , Is there a possibility to configure one os the Fast Ethernet ports as WAN port for internet.

View 2 Replies View Related

Wireless :: Compaq Presario 7360 No Ethernet Port

Mar 11, 2011

I have no ethernet port on the presario 7360 - will a wireless usb work for internet connection for this old of a computer?

View 2 Replies View Related

Connecting Ethernet From Spare Port To Wireless Router

Oct 5, 2012

Laptop has 2 ethernet ports and receives the internet via one of those Ethernet ports. Can I plug a ethernet lead from my spare port on my laptop to a wireless router and create a wireless network (via the internet from my laptop)? Is this possible and how do I do it ?

View 11 Replies View Related

Wireless Router Not Recognizing Ethernet Cable In The WAN Port?

Jul 10, 2012

I have a D-link WBR-2310 wireless router connected to a ZyXEL P-600 series modem. Everything worked fine untill a couple days ago when I had a power surge; since then the wireless router won't show on the modem that the ethernet cable is plugged in, and I get no wireless or DSL internet. I called the internet service provider, and they told me to reset both the modem and the router, which I did and it worked fine for about an hour; then it didn't recognize the cable again. I thought maybe it was the ethernet cable itself so I bought a new one, and it didn't correct the problem. When I hook any of the cables up directly from the modem to the labtop or the pc the ethernet light comes on and I have internet connection again. Why doesn't my router recognize the cable?

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: Where Is PVC Ethernet Port Mapping In TD W8961ND

Jan 18, 2013

Region : Vietnam
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : 3.0.0 build 120524 rel 05221
ISP : VNPT

Where is the PVC Ethernet Port Mapping in TD W8961ND?

View 1 Replies View Related

Enable Desktop Computer To Recognize Wireless Router Using Ethernet Port?

Mar 20, 2012

How do i enable my desktop computer to recognise my wireless router using the ethernet port

View 2 Replies View Related

Extend Wireless By Adding Extra Router Via Ethernet Wall Port?

Jun 15, 2012

My dorms have wifi in the common room, and ethernet wall ports in the rooms since wifi doesnt reach that far. They both have the same network name (e.g. the wifi network is named 'apple', and when i connect through ethernet in my room the name is also 'apple') I need to have wifi in my room. So, if i get a router and connect it to the ethernet port in my room's wall, would that work? Is that all you have to do or is there some other stuff i should know about?also can i put a password on it? And also, will it carry the network traffic of the common room?(if two people are using the common room's wifi, will the wifi speed in my room be affected nd whatnot) i have a linksys router lying around at home (the blue one with the double antennas, everyones seen them, and the one in the common room is the same...wireless g)

View 7 Replies View Related

Linksys Wireless Router :: WRT54GC / Unable To Connect Through Ethernet Port To PC?

Feb 15, 2012

im using linksys broadband router model no WRT54GC firmware version 1.06....im using it since 2005 still now i didn't face any problem, but since 3days im facing a problem all of a sudden. i.e im unable to connect through Ethernet port ( through lan wire) to my PC, but i can access router through wifi.when i connect through wifi it is saying that there is no internet access. but i can access my router administration.i cross checked with another pc and another connecting cable , but same problem, no use i also tried resetting my router, updated my firmware. no use. 

View 1 Replies View Related

Cisco Wireless :: 4400 How To Configure Controller In Case Ethernet Port Goes Down

Oct 7, 2012

I want to configure a Cisco Wireless Lan Controller (4400 and 5500 series) with to data ports for failover?  I think the primary and secondary ethernet connections should be configured as trunks.  I cannot find anything on CCO about this or on the internet per se.  I know how to configure for failover with APs but cannot find anything on how to configure the controller in case an the ethernet port goes down.

View 7 Replies View Related

Dell :: N5110 Wireless Is Extremely Slow / Can't Connect Using Ethernet Port

May 23, 2013

I bought my laptop over a year ago. The wireless is really slow. I read other posts about this issue and found out that the network adapter(n1030) on this laptop is faulty or something. So I tried connecting to the internet using the Ethernet port.

The port shows up on my device manager.Realtek PCIe FE Family Controller.I know there is nothing wrong with the modem or the Ethernet cable because internet on the other computers in my house work fine.

I would also like to add that when I bought the computer, it came with windows 7 but had the ubuntu sticker on it. People in Fiji only mostly use windows so I guess the shop I bought this from did the change to windows themselves.

View 1 Replies View Related

F5D7632-4 - Set Up Ethernet Port For DHCP With Belkin ADSl Modem With Wireless G Router?

Mar 14, 2011

how do you set up an ethernet port for DHCP with a Belkin ADSl modem with wireless G router, model number F5D7632-4?

View 1 Replies View Related

Connect Canon IP6600D Printer (USB 2.0 Interface) To An Ethernet Port On Wireless Router?

Jan 28, 2011

Can I connect my Canon iP6600D printer (USB 2.0 interface) to an Ethernet port on my wireless router so as to end up with a network printer?

View 1 Replies View Related

Linksys Wireless Router :: WRT610N Connected To Ethernet Port Of Previous Internet Modem

Dec 2, 2011

I was very happy working with my WRT610N connected to the ethernetport of my previous internet modem. Recently I had to switch to a new modem CISCO EPC3925. Unfortunately this combination does not work anymore. I don't get an internet connection on my WRT610N anymore. I therefore have to connect all computers (LAN and WIFI) to this EPC3925. Especially for the WIFI I'm not fully happy. My IPAD2 sometimes does not want to connect, a problem which never occurred when connecting to WRT610N.
 
I probably need to change a setting, but where? In the EPC3925 or in WRT610N?

View 4 Replies View Related

Cisco Wireless :: WLC 2106 / Setup Mesh And Use Ethernet Bridge Port On MAP To Extend Network?

Mar 3, 2013

I've a WLC 2106 and it is running IOS version 7.0.240. I am trying to setup a wireless mesh and used the Ethernet bridge port on the MAP to extend the network. The wireless mesh works fine but I can not get the switch to work that is connected to the ethernet port on the MAP.I'm using two different Access points. I'm using a Air Cap 3502i as the RAP and a Air Lap1142N as the MAP.The switch port that is connected to the RAP and MAP is configured as the following:

switchport mode trunk
switchport trunk native vlan 2
switchport trunk allowed vlan 10,20,30,40

[code]....
 
The wireless mesh between the RAP and MAP works fine. I can connect a device to the MAP wirelessly and access the network with no problem but I can not get anything to work that connects to the switch that is connected to the MAP ethernet port.

View 2 Replies View Related

Linksys Wireless Router :: WRT54GL Option To Restrict / Share Bandwidth Equally To Each Ethernet Port

Sep 5, 2011

WRT54GL has an option to restrict or share the bandwidth equally to each ethernet port or wireless? I need this option in a low bandwith area because the first computer connected to the router who makes some traffic (e.g. youtube) takes all the bandwith allocated by the ISP. url...

View 1 Replies View Related

What Do The Lights On An Ethernet Port Mean

Feb 28, 2011

I am trying to figure out what the lights on my Dell ethernet adaptor port mean.

View 1 Replies View Related

Convert WRT 54 2 To Wireless Bridge?

Apr 27, 2011

How do I convert an old WRT 54G 2 to a wireless bridge.

View 1 Replies View Related

AUI Ethernet Port On Cisco 2501?

Apr 17, 2012

I am quite a bit rusty from my days of networking. I am trying to setup my lab so I purchased 3 cisco 2501 to study for my CCNA, my question is? I have 2 serial interfaces and 1 AUI for ethernet on each router. How can I configure the Ethernet interface, if I don't see it on the configuration. From the CLI command I issue the command show ip int brief. But It only shows the 2 serials but no E0 interface.

PS. I do have an Ethernet Transceiver connected to the AUI port on the router with a straight through cable going into a 2950 switch.

View 7 Replies View Related

Laptop Ethernet Port Is Dead?

Jul 5, 2012

Is it possible my Laptop Ethernet port is dead?After I got home today I noticed that the store that passed by caused a short power outage. I knew this because several electronic devices that rely on constant power were reset.Next to be noticed was that my computer had no connection to the internet, and my Ethernet port has a constant orange light on.I proceeded to perform a full network restart for my modem, router, and computer. This solved the internet connection to my router. My roommate was able to connect via an Ethernet cable to the internet on any of the routers ports, but I was still unable.However,I was able to connect to the wireless on my computer. Unfortunately no matter what port, or cable I use my Ethernet port still is unresponsive to it all, and still has the constant orange light.you.Specs:Manufacturer: Gateway

Model: P-78
OS: Windows 7
CPU/Ram: Intel(R) Core(TM) 2 Duo P7350 2 GHz / 4090 MB
Video Card: NVIDIA GeForce 9800M GTS
Sound Card: NVIDIA High Definition Audio Conexant High Definition SmartAudio 221

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved