How To Convert A Ethernet RJ45 Port To A Wireless One

Aug 7, 2012

Hotels have wired LAN connections and not wireless. Is there a device that will plug into the ethernet cable and offer wi-fi for more than one laptop/smart phone in the hotel room?

View 1 Replies


ADVERTISEMENT

How To Convert A Rj45 Port To Receive Wifi

Jan 19, 2011

is there an adapter ( wifi reciver ) that plug into RJ45 port so RJ45 can receive wifi signal ?

View 1 Replies View Related

Convert Ethernet Port Into Wireless?

Sep 3, 2011

My daughter is going to university. An Ethernet connection is provided but she wants to work wirelessly. Is there a gadget to attach to the Ethernet port that will create a wireless signal for her to connect her iPad and PC laptop?

View 4 Replies View Related

Convert A Ethernet Port To A Wireless Modem?

Sep 16, 2011

watch netflix on my tv,which has netflix,but has a Ethernet connection,and must use a rj45 cable,can I change it over to a wireless signal,so I won';t have to use a cable?

View 1 Replies View Related

Convert RJ45 To Wireless Using A ADSL Router?

Mar 14, 2012

I have an ADSL router like the one showed below & internet from the provider via a RJ45 cable.

I need to share the incoming internet from the RJ45 cable to the remaining three RJ45s & over the wireless. How to configure the router to get this working?

Also the internet provider needs me to authenticate via their default webpage before I can access the internet & I can say it doesn't have any MAC binding.

View 1 Replies View Related

Ethernet RJ45 Port - Two Different Internet Connection To One Equipment?

Nov 16, 2012

I have an telemetry equipment which have one ethernet RJ45 port, so I have an internet connection and I can connect to this device remotely using a browser on my PC for security reason I want to feed this device with a second internet connection that is coming from a cellular line , can I just put the two different Internet cables into a switch and from that switch connect my device?

View 1 Replies View Related

Cisco WAN :: 2911 - Get Away With Configuring Blackbox With RJ45 To Copper Port On Router Ethernet?

Apr 27, 2011

Purchased a 2911 router for a customer, and I'm sure I'm missing a module here.
 
Teleco installed T1 and left connection to smart jack.  Router only has 2-3 copper ports.
 
Can I get away with configuring the blackbox with RJ45 to the copper port on the router ethernet or do I need to purchase a HWIC ?

View 1 Replies View Related

Cisco Wireless :: What Type Of Mini-GBICS Should Used For RJ45 Ethernet Connections

Feb 7, 2013

What type of Mini-GBICS should I used for RJ45 ethernet connections for my 4402 Wireles Lan Controller? Should I use the GLC-T SFP? Is it the right one? aAso is Mini-Gbics a industry standard which means I can use any brand of Mini-GBIC for this Connection like Dell Brand Dlink or Others.

View 1 Replies View Related

ADSL Wireless Router Configuration With Ethernet (rj45) Internet Connection?

Dec 2, 2012

I have this adsl wireless router but my internet connection only has RJ45 directly connected to my PC. My questions is how can I use my ADSL wireless router with this kind of internet connection.. because I really want to make my connection wireless..

View 1 Replies View Related

Security Camera System - Convert Cat5 Ethernet To Wireless?

Aug 21, 2011

I'm building a security camera system,which can connect to internet to be viewed from away.The camera receiver connects to the modem with a Cat 5 ethernet cable,which results in a cable running across the room. My modem is a wireless type,but the camera receiver only has cable support it seems.

Is there a device that I can use to get rid of the Cat5 cable in this scenario?

View 2 Replies View Related

Cisco Switching/Routing :: 888w - Way To Change Usage Of ISDN Port To Normal RJ45 Port

Sep 25, 2012

I have Cisco 800 series (888w) with BRI-ISDN port. Is there any way to change the usage of ISDN port to normal RJ45 port?I want to use this SOHO router to sharing connection.

View 0 Replies View Related

Internet Line Connected To Wireless Router LAN Port RJ45

Oct 30, 2011

I have internet line came from my neighbor throught his hub directly connected to my laptop.. My problem is, i buy wireless ADSL model router but when i check the DSL line port its rj14 which i can not connect my RJ45 internet line. Addtional information, my wireless router have another 4 port LAN. Can i connect my internet line to LAN port,if it so how will i configure the router..

View 1 Replies View Related

Plugging In RJ45 Ethernet Doesn't Work

Jun 2, 2011

My parents have a windows 7 desktop with ethernet plugged in for internet. I use a Asus EEE 1005HA with jolicloud. They do not have wireless, only wired internet. When I plug in the ethernet cable, the netbook doesn't recognize the internet access. Nothing wrong with the ethernet port on the netbook, as i've used wired network at my dorm and the port does recognize the ethernet cable at my parents' house.

Also, is it possible to use the desktop as a sort of wireless router? Would connecting a usb wireless dongle to the desktop allow me to connect my netbook to the internet via the desktop?

View 3 Replies View Related

Cisco Switching/Routing :: Convert Switch Port To Router Port On 6500

May 8, 2012

On the supervisor card of a cisco 6500 series, according to the following link, [URL] it only has 2 uplink ports on the card. Would I be correct in assuming that I only have those to ports that I can configure IP addresses on?
 
The cisco that is being devlivere is coming with a 48 port switch and 24 port fibre switch. Could I change any of those ports into a router port and configure IP addresses on those?
 
The supervisor card is a ws-sup-720-3b the 48 port switch is a ws-x6748-ge-tx the 24 port fibre switch is ws-x6724-sfp

View 3 Replies View Related

Lan Port For Wired Connectivity - Convert To Wifi / Wireless?

Oct 19, 2012

I have an equipment which has LAN port for wired connectivity to the computer. I can connect 10 such equipment thru LAN to the computer & display the data of all the equipments on computer screen. This LAN network I wanna convert to Wi-fi/wireless.

View 4 Replies View Related

Convert Rg8u Wifi Cable To Ethernet?

Oct 13, 2011

Am trying to patch an RG8U cable from a WiFi dish to an ethernet cable for connection to a router.

View 8 Replies View Related

Use RJ45 Port On Motherboard And PCI?

Mar 18, 2011

Is it possible to use my atom mini itx with pci + pci nic card and creating a firewall? No possible problems between using the motherboard port and a pci port? I'd like to fool around with smoothwall or another firewall software.

View 6 Replies View Related

Connect RJ45 Port To The Network Cable?

Jul 6, 2011

procedures to connect RJ45 port to the network cable

View 1 Replies View Related

Cabling / Cards :: Converting RJ45 To USB Port?

Dec 14, 2011

I have an old 2007 model Toshiba HD LCD television. It does not have a USB port, but it does have a connection for RJ45. I want to convert this to a USB port, Is there a converter/connector for this purpose?

View 3 Replies View Related

Cisco :: WS X6148A RJ45 ASIC / Port Group Utilization

Mar 8, 2012

Is there a way to view the utilization on a WS-X6148A-RJ-45 ASIC/port group?

View 7 Replies View Related

Cisco WAN :: 2911 - Physical Single RJ45 Port To Handle Multiple WAN IPs?

Nov 7, 2011

I am learning the 2911 router. Is there a way to set a physical single RJ45 port to handle multiple WAN IPs? Or do I need to buy a port expansion module.

View 12 Replies View Related

Cisco Switching/Routing :: Additional RJ45 Port Required On 1941 ISR

Nov 16, 2012

One of branch locations has a Cisco 1941 Router . The port details are as follows
 
-Gi0/0 - ISP line
-Gi0/1 - Inside Network ( To a 2960 Switch)
 
Now they have procurred another line from ISP through which  MPLS based VPN to the Main location is configured. What are the options I have , to terminate it on the Router ? As all the On board LAN ports are filled I guess I wont be able to do anything with the current setup .Are Switching modules available ? What is the Embedded-Service-Engine0/0 port that I see on #sh ip int b output ?

View 4 Replies View Related

Cisco Switching/Routing :: 4900M WS-X4908-10G-RJ45 Port Startup Delay

Mar 4, 2013

We have recently purchased 2 x 4900M switches with the following configuration:
 
2 x X2-10GB-SR installed in port te1/1, 1/2 (optical)
 
1 x 20 x 1GB RJ45 installed in the top left of chasis ge2/1 - 2/20
 
1 x WS-X4908-10G-RJ45 8 port 1/2 card in the top right of chassis te3/1 - 3/8
 
We have te1/1 connecting the 2 switches, and various vlan's and connections on the 1GB RJ45's with no problems.
 
However, we have a number of 10Gbps BaseT connections te3/1 - te3/5 which are causing us issues. On a reload of the switch or removal / re-install of the cable it can take anywhere up to an hour for the port to become active again. So when we reload the switch, we may get a connection come up after say 3 mins, but the port next to it may not come up for 15-60 min. The cabling is all the same (CAT6 and has been tested/verified) and all connections go to Broadcom 10Gb cards in Dell 820 servers running vmware. We have the following set on the ports:
 
switchport mode access
spanning-tree portfast
 
No speed or duplex can be set on these ports - these options are not available in the config.
 
Once a link is finally established, it will hold the link solid with no problems, but this is a problem for us, we can't have a reboot take an undetermined amount of time for the link to come back.

View 15 Replies View Related

Linksys Wireless Router :: E3000 Ethernet Port 4 And Internet Port Not Working

Jul 3, 2012

There is no "blinking light" indication on my E3000 at the Internet (Yellow label) and Ethernet port no 4. I tried plugging in 2 cables at all of the ports. I got the blinking indication at Port 1 through 3. The same cable's have no response at Port 4 and Internet port. As a result my I am not able to connect to the internet.

View 2 Replies View Related

Cisco Switching/Routing :: Convert 1941 Router To POE With 4 Port Switch

Dec 20, 2011

I have a Cisco 1941 K9 Router.  I want to add POE functionaltiy to it.  Specifically I want a 4 port EHWIC POE switch to power a couple of AP's.
 
This is what I understand I need; Upgrade/replace the internal power supply with PWR-1941-POE power supply,  This is supplied with a fan replacement also (not yet purchased).buy 1 x EHWIC-4ESG (4 port switch)buy 1 x ILPM-4 (inline daughter card / power supply board) I think the real question here is the 4 port switch... there are two types available one is EHWIC-4ESG=the other is EHWIC-4ESG-P= 

Is there any difference between these two switch modules? or are they the same and the more expensive "P" version is simply supplied with the ILPM-4 daughter card for POE?
 
I have recieved via courier today 1 x EHWIC-4ESG, and found a ILPM-4 on ebay for a good price.  WIll this provide POE through the switch EHWIC-4ESG?

View 7 Replies View Related

Ethernet Port Doesn't Recognize Any Ethernet Cord

Dec 26, 2011

I've had trouble connecting to my own internet and have no wireless. I'm using my neighbor's wireless and it's really slowing her's down. I've tried restarting my laptop (it usually works) and then reinstalled the device under "device manager". It's not the cord, I've checked with my neighbor's laptop and it works fine.I use a Sony Vaio VGN-NS140E with Windows Vista SP2.

------------------------------------------------------------------------
{ipconfig /all} This is while I only have an ethernet plugged in and no wifi connection.
Windows IP Configuration
Host Name . . . . . . . . . . . . : FairyHo

[code]....

View 7 Replies View Related

Ethernet Port Not Recognizing Ethernet Cable?

Apr 30, 2011

I have a Dell XPS M1530 with Vista 32 bit. When i plug in a cable i get nothing, no error, and the comp does not recognize that a cable has been plugged in. I think that this started after my Hard drive failed and Dell replaced it but i'm not positive. No errors (? or !) in Device Manager and I can't find the Marvell 88E80XX 10/100 Ethernet Controller in device manager. I have attempted to Reinstall the drivers. The wireless is still working. I have one Light to the right of the port that is on all the time solid but no flashing with the cable in or out.

View 14 Replies View Related

No Ip For Wireless Or Ethernet Port

Apr 15, 2012

A few days ago, my lappy crashs (Blue Screen) and when i managed to get the page showing, start windows normal mode, safe mode or last know good config, i select the last known good config, But when i get into the windows, i have these message on my network icon saying limited or no connectivity. I run ipconfig on cmd, and got all

0.0.0.0

i have seen some of the troubleshoot advice on other thread on ipconfig/release, flush and renew but it doesnt works i tried to reinstall my drivers, but still the same, There wasnt any ! on my device manager, and i have selected the internet protocol, IP address and DNS, Automatically but still, it doesnt works

View 1 Replies View Related

Cisco WAN :: Nexus 5010 Fixed Port - Group C (17-20) Encrypted Ethernet Port

Oct 14, 2012

if I can use the encrypted port as unencrypted ethernet ports? url.. Each individual port on the Cisco Nexus 5010 switch is numbered, and groups of ports are numbered based on their function. The ports are numbered top to bottom and left to right.There are 20 to 28 ports on the Cisco Nexus 5010 switch, depending on which GEM is installed.
 
The 20 fixed ports form group 1 and are named 1/port_number. Ports 1 through 16 are unencrypted Ethernet ports. Of these, ports 1 through 8 are 10-Gigabit Ethernet and 1-Gigabit Ethernet-capable ports. Ports 17 through 20 are encryption-capable Ethernet ports.

View 1 Replies View Related

Cisco WAN :: 857 ADSL Possibility To Configure Fast Ethernet Port As WAN Port

Apr 4, 2012

I have a Cisco 857 router which i used for Internet connection with RJ11 connectior (ADSL0 POTS) but now the ISP has changed the internet link with PPOE type and the ONT connection is RJ45 , Is there a possibility to configure one os the Fast Ethernet ports as WAN port for internet.

View 2 Replies View Related

Wireless :: Compaq Presario 7360 No Ethernet Port

Mar 11, 2011

I have no ethernet port on the presario 7360 - will a wireless usb work for internet connection for this old of a computer?

View 2 Replies View Related

Connecting Ethernet From Spare Port To Wireless Router

Oct 5, 2012

Laptop has 2 ethernet ports and receives the internet via one of those Ethernet ports. Can I plug a ethernet lead from my spare port on my laptop to a wireless router and create a wireless network (via the internet from my laptop)? Is this possible and how do I do it ?

View 11 Replies View Related

Wireless Router Not Recognizing Ethernet Cable In The WAN Port?

Jul 10, 2012

I have a D-link WBR-2310 wireless router connected to a ZyXEL P-600 series modem. Everything worked fine untill a couple days ago when I had a power surge; since then the wireless router won't show on the modem that the ethernet cable is plugged in, and I get no wireless or DSL internet. I called the internet service provider, and they told me to reset both the modem and the router, which I did and it worked fine for about an hour; then it didn't recognize the cable again. I thought maybe it was the ethernet cable itself so I bought a new one, and it didn't correct the problem. When I hook any of the cables up directly from the modem to the labtop or the pc the ethernet light comes on and I have internet connection again. Why doesn't my router recognize the cable?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved