Is it possible to use my atom mini itx with pci + pci nic card and creating a firewall? No possible problems between using the motherboard port and a pci port? I'd like to fool around with smoothwall or another firewall software.
View 6 Replies
how much difference does it makes if i install a NIC PCIe card instead of using the MotherBoard LAN RJ45 for DSL PPPOe internet access?how much does a NIC lowers the latency?
View 3 Replies View RelatedI've been having an issue with my internet connection. I have AT&T Uverse high speed internet, complete with the Motorola NVG510 ADSL modem. For the past couple weeks, my download speeds have gone from 1.0 MB/s to < 100 KB/s up to 400 KB/s if I'm lucky.I used to be able to download files and watch videos at the same time with very little trouble, but now I only have enough bandwidth to either do one or the other without causing any problems. I thought my ISP had throttled my bandwidth, but I've run the Glasnost tests at url... and it came back as fine.It may not mean anything, but I should note that a few weeks ago, we had storms move through the area and lightning struck our house. It ended up shocking my mom through the USB mouse while she was using my computer, it blew out one of my computer speakers, and I believe it's the reason why the ethernet port on my motherboard no longer works.
View 13 Replies View RelatedI have Cisco 800 series (888w) with BRI-ISDN port. Is there any way to change the usage of ISDN port to normal RJ45 port?I want to use this SOHO router to sharing connection.
View 0 Replies View Relatedreliability of the ET dual port server adapter. I have a Windows Server 2012 hyper-v host thats used to run all of the vm's I use in my house on an ASUS P9X79 WS motherboard. The board comes with 2 Intel gigabit nic's, one of which is an Intel server nic. Ever since installing Server 2012 it only registers one onboard adapter for use and the other isn't. Because of this I am planning on getting a second server grade network adapter for the vm's to use and have the onboard dedicated to management only. The only thing currently holding me back is if the OS will properly detect and run the network card in a non-server motherboard? Any insight as to if it will work on my board or not? Google has only revealed uses on server boards and not workstations.
View 13 Replies View Relatedprocedures to connect RJ45 port to the network cable
View 1 Replies View RelatedI have an old 2007 model Toshiba HD LCD television. It does not have a USB port, but it does have a connection for RJ45. I want to convert this to a USB port, Is there a converter/connector for this purpose?
View 3 Replies View RelatedHotels have wired LAN connections and not wireless. Is there a device that will plug into the ethernet cable and offer wi-fi for more than one laptop/smart phone in the hotel room?
View 1 Replies View Relatedis there an adapter ( wifi reciver ) that plug into RJ45 port so RJ45 can receive wifi signal ?
View 1 Replies View RelatedI have an telemetry equipment which have one ethernet RJ45 port, so I have an internet connection and I can connect to this device remotely using a browser on my PC for security reason I want to feed this device with a second internet connection that is coming from a cellular line , can I just put the two different Internet cables into a switch and from that switch connect my device?
View 1 Replies View RelatedIs there a way to view the utilization on a WS-X6148A-RJ-45 ASIC/port group?
View 7 Replies View RelatedI have internet line came from my neighbor throught his hub directly connected to my laptop.. My problem is, i buy wireless ADSL model router but when i check the DSL line port its rj14 which i can not connect my RJ45 internet line. Addtional information, my wireless router have another 4 port LAN. Can i connect my internet line to LAN port,if it so how will i configure the router..
View 1 Replies View RelatedI am learning the 2911 router. Is there a way to set a physical single RJ45 port to handle multiple WAN IPs? Or do I need to buy a port expansion module.
View 12 Replies View RelatedOne of branch locations has a Cisco 1941 Router . The port details are as follows
-Gi0/0 - ISP line
-Gi0/1 - Inside Network ( To a 2960 Switch)
Now they have procurred another line from ISP through which MPLS based VPN to the Main location is configured. What are the options I have , to terminate it on the Router ? As all the On board LAN ports are filled I guess I wont be able to do anything with the current setup .Are Switching modules available ? What is the Embedded-Service-Engine0/0 port that I see on #sh ip int b output ?
We have recently purchased 2 x 4900M switches with the following configuration:
2 x X2-10GB-SR installed in port te1/1, 1/2 (optical)
1 x 20 x 1GB RJ45 installed in the top left of chasis ge2/1 - 2/20
1 x WS-X4908-10G-RJ45 8 port 1/2 card in the top right of chassis te3/1 - 3/8
We have te1/1 connecting the 2 switches, and various vlan's and connections on the 1GB RJ45's with no problems.
However, we have a number of 10Gbps BaseT connections te3/1 - te3/5 which are causing us issues. On a reload of the switch or removal / re-install of the cable it can take anywhere up to an hour for the port to become active again. So when we reload the switch, we may get a connection come up after say 3 mins, but the port next to it may not come up for 15-60 min. The cabling is all the same (CAT6 and has been tested/verified) and all connections go to Broadcom 10Gb cards in Dell 820 servers running vmware. We have the following set on the ports:
switchport mode access
spanning-tree portfast
No speed or duplex can be set on these ports - these options are not available in the config.
Once a link is finally established, it will hold the link solid with no problems, but this is a problem for us, we can't have a reboot take an undetermined amount of time for the link to come back.
Purchased a 2911 router for a customer, and I'm sure I'm missing a module here.
Teleco installed T1 and left connection to smart jack. Router only has 2-3 copper ports.
Can I get away with configuring the blackbox with RJ45 to the copper port on the router ethernet or do I need to purchase a HWIC ?
The LAN RJ-45 on my motherboard is dead, no light and no access to my network,
View 3 Replies View RelatedI need a driver for a foxconn n15235 mthr bd do you have drivers for download?
View 3 Replies View Relatedi dont have ethernet controller for AMI motherboard A780L3F
View 1 Replies View RelatedDual processor motherboard for server?
View 1 Replies View RelatedHow can i download free audio & Lan Driver
View 1 Replies View RelatedGA-890FXA-ud5 is supposed to have built in 802.11n. I just upgraded my Verizon modem to mifi2200 but cant's get them to play nice
View 1 Replies View RelatedI wanna get one of the following Atom boards for a Pfsense box:
X7SPA-HF-D525 Mini-ITX - [URL]
X7SPE-HF-D525 FlexATX - [URL]
X7SPA-HF D510 Mini-ITX - [URL]
X7SPE-HF D510 FlexATX - [URL]
And put it in this case: [URL]
However, I can't find any info on which style motherboard is compatible with the expansion slot on the front of the case. I know you need a riser card to extend the PCI-e slot to the expansion slot, but since FlexATX and Mini-ITX are difference shapes/lengths, I don't know if the case's expansion slot is designed to only work with one or the other.
I have installed a new motherboard in my destop, i purchased the same model(ms 6763 ver 1.0) but for some reason the driver for the ethernet controller hasnt installedThe motherboard didnt come with a driver disk. I would like to know how or where i can obtain said driver. I have tried a number of sites online via a diffferent pc (as mine at present wont go online as i cannot connect it to hub) but these sites want to install driver/hardware identifier software and as it is a different computer i want to install said driver this solution is no good to me
View 2 Replies View RelatedI have a TA790GXB A2+ Ver. 6.x motherboard. I have windows 7 installed in it. I have a pppoe connection for internet. Its drops abruptly. Where as i installed Linux on it and it works fine. (Fedora 16)
View 1 Replies View Relatedi built a mini NAS system with a Intel D945GSEJT mother board (atom cpu) -
1 x FSP 12V 5A 60W AC Adapter
1 x EPC-01 Case
Intel Desktop Board D945GSEJT With integrated Intel Atom processor N270Motherboard - mini ITX / micro ATX - Intel Atom N270 - i945GSE - Gigabit Eth
1 Kingston ValueRAM 1GB 533M
WD scorpio black 500GB (only for storage)
i have installed debian squeeze (headless shell only) on a 1gb pen drive that is readonly (using aufs)it its a great setup for me?i use it for file server, webserver (local only), SAN server etc...the only problem i have is that sometimes the drive access is slow when using iscsi from it, or coping files.on samba i get about 30MB/s NFS i get about 55MB/s using iperf i get max 61MB/s (but if i setup the server on it - 114MB/s can be transferred to it) is there any way to increase network performance on it? if you have this board what type of transfer speeds do you get?
I recently upgraded my 2811 router with an AC- IP power supply, and installed a HWIC-4ESW-POE, with an Inline Power Daughter Card (ILPM-4) installed on the HWIC.
The second I turned the router's power on, there was a spark and a burning smell. Everything still works, except POE. Examining the card, I see it caused a circuit on the ILPM-4 motherboard to blow, and there is black residue everywhere. This is a Genuine Cisco power supply, but why it's done this.
Furthermore, when the power supply was first installed, it had so much electricity (and I know this is why the card got toasted) that touching the end of the console cable or an Ethernet cable connected to the router, or even the router chassis, would cause you to get a small electric shock, like touching a mild electric fence. Clearly, the power supply I installed is "too-powerful", but it is a 2811-AC-IP and nothing should have caused this.
I have a P7H55 Asus Motherboard with the ethernet port and cable working fine individually. However, when i connect them together,the ethernet light on the router remains stable as if connected but still the desktop shows not connected. This time i have installed the drivers which came from the motherboard manufacturer and are the latest. In the Network and Sharing Center, the icon is enabled. It does not show cross sign.
View 10 Replies View RelatedI'm looking (LAN) driver for Win Server 2003 for the MAXIMUS motherboard of ASUS for the lan card
View 1 Replies View RelatedI have two of these computers side by side. The card in issue is recognized, but says no driver. I have copied the driver from the good 580e, downloaded everything I could, and cannot get it? Using Win7, 64 bit, comcast DSL. The bad one just stopped working?
View 1 Replies View RelatedThis has been driving me absolutely crazy but I am glad to have found the source of it. Over the past 4-5 weeks ever since i built my new computer, my computer has always had this wierd high pitch noise. I dont know if its coil whine or not, but the sound signature is def not the same as the coil whine that comes from my 7970 card. It sounds more digital.
What could be the cause of this? And what would the remedy be? My ethernet cable is approx 60 ft so it will be a pain in the ass to replace. Or buy another NIC?
edit: forgot to mention....the noise is constant. Not intermittent with usage. No amount of load or idle on the network changes the noise.
I have an ASUS Z77 Motherboard and when I install the AI Suite II which comes on the installation disc it blocks my internet connection. When I uninstall the software my connection is fine. I am using an Ethernet connection by the way. I think it is being blocked by the component called Network iControl. As soon as that component is uninstalled my Internet connection comes back. I want to have the software, but I also want to have my connection.
View 1 Replies View RelatedMy Storage supports RJ45 Connectivity. Some it gives slow performance. What if i connect all the Macpro using fibre optic and use some sort of converter to convert all the fibre connection to LAN. Will it increase performance?
View 2 Replies View Related
