On Gigabyte 890fx Motherboard 802 11n Doesn't Work?
Feb 19, 2011GA-890FXA-ud5 is supposed to have built in 802.11n. I just upgraded my Verizon modem to mifi2200 but cant's get them to play nice
View 1 RepliesGA-890FXA-ud5 is supposed to have built in 802.11n. I just upgraded my Verizon modem to mifi2200 but cant's get them to play nice
View 1 RepliesI have an problem with VPN connection on notebooks. Sometimes the VPN connection works perfectly, and other times it just doesn't work at all.The Cisco VPN client software is version 5.0.04.0300. Operating system is Windows XP Prof SP2.When the connection fails, the client statistics window shows "Bytes Received: 0".Rebooting the system, has no effect
View 1 Replies View RelatedNormally, when one right clicks on a drive letter having opened 'My computer', then select 'Sharing' there is a warning about sharing a whole disk and the option to accept anyway.One laptop doesn't offer that. It just shows the admin share of C$ immediately. If I choose 'New' at the bottom of the panel a new drive letter and drive name can be entered but it can never be accessed over the network! It shows up in the workgroup but I get a network error 'Network path not found' if I try to access it. I can ping the laptop from anywhere by name and IP address.The laptop can access all the other PCs without any problem.
View 12 Replies View RelatedI have a Realtek PCI GBE Family Controller. I recently reinstalled Win7 and it loaded drivers for the card automatically. I actually didn't notice the speed issue until I went to move stuff around on the home network.
The Device Manager lists the above NIC. Under Properties I have:
Auto Disable Gigabit = Disabled
Speed & Duplex = Auto Negotiate
I tried setting Speed & Duplex to 1.0 Gbps Full Duplex but I only interrupted a file transfer by doing this. (The Network icon in the System Tray indicated that the network connection was lost.)
I am using Cat5E 1 Meter or less cables. I have 2 PCS next to my desk with a D-Link Gigabit Switch sitting on top of one of the computers. AFAIK all ports on the switch support Gigabit.
So, my desktop, running windows 7, can no longer connect to the internet. It has no problem connecting to the router, but it will not receive packets. I double checked my connection using my laptop and it works with wireless and wired connections, so I know it's something with my desktop. I would really like to avoid doing a reinstall, I don't have anywhere to back my data up to.
View 5 Replies View RelatedWhenever my main PC is turned on, i get no signal from the wireless, like i cannot use my phone or laptop on the internet i use an Ethernet cable which is directly connected to my main PC my windows is also window XP and my modem model is TG782T only if my PC is turned off the wireless works
View 2 Replies View RelatedI have been having problem with my internet lately. I live in UK and there is this game that I used to play that has a region IP block so I have to use Hotspot shield to play,but now my internet doesn't connect to Hotmail or this forum unless hotspot shield is turned on. How can I fix that? I tried config/flushdns but no luck. I am using window xp.
View 1 Replies View RelatedWe have recently switched routers and now my laptop doesn't work wirelessly; it connects to the router but there isn't an internet connection. The laptop works fine when the LAN cable is plugged in though. Our other laptop can connect to the internet with or without the LAN cable. Both are Toshibas running on Windows Vista.I have tried various approaches such as downloading the latest Atheros AR5007EG drivers but it said that they're already the most up to date. [code]
View 5 Replies View RelatedI purchased a used Compaq laptop with a Realtek USB wireless adapter. The laptop came with XP Pro. I connected the adapter and everything worked great. My husband got a virus I couldn't remove. I have the CD for XP Home so I did a clean install.Windows works fine. I connected the USB wireless adapter and ran the installation disk. When I open Realtek to connect nothing appears in the available networks. I checked the device mgr and it says Realtek is working. I turned off my 2Wire gateway and then reconnected it. I doubled checked that the Windows wireless utility is disabled. Still no available networks. Everything was fine before the reinstall of Windows XP Home.
View 5 Replies View RelatedIt's a 64 bit machine, with windows 7. He fills out surveys and gets money from them, and I don't like to work on his machine because of this. But... He called, so I came over and Anyhow... I'm worried that the Ethernet has gone bad on the motherboard, but they bought a USB stick for wireless internet, and that didn't work either.I realize I have basically no worth while informationHis router works fine, if you plug in another computer it can connect to the internet, but his computer can't. Something is turned off as far as I can tell. And I can't figure out how to turn it on.
View 5 Replies View RelatedI have a cable that is not working on the router end or the computer end. Could I have the wrong cable? The writing on the package is: Category 5E patch cable 350 MHz UTP Standed 24AWG PVC jacket, molded boot. 50U" plugs complies with FCC part 68Cat5e patch cable, RJ45-RJ4524 AWG stranded, 568B
View 2 Replies View RelatedWhenever my main PC is turned on, i get no signal from the wireless, like i cannot use my phone or laptop on the interneti use an [COLOR=blue !important][COLOR=blue !important]ethernet[/COLOR][/COLOR] cable which is direclty connected to my main PCmy windows is also window XP and my modem model is TG782T
View 2 Replies View RelatedWould a Linksys USB300M Network Adapter allow my computer to connect to the internet via Ethernet? My computer has an Ethernet port that doesn't work. I need Ethernet connection to connect to the internet through FIOS. I currently use an USB port on my computer to connect using DSL. I want to purchase a USB-Ethernet adapter that plugs into my USB port but has an Ethernet jack at the other end: USB300M Network adapter - Hi-Speed USB
View 5 Replies View RelatedWe recently acquired an internet connection. Connecting via LAN works fine for me but not to my room mates. We're all using Windows 7. Windows troubleshoot it and says "Local Area Connection doesn't have a valid IP configuration" on their laptops. What should we do?
View 5 Replies View RelatedThe electric went off in my house about an hour ago, causing my computer to turn off as a result. Ever since, the internet on my PC has been acting up.
My internet was working perfectly before the power cut both on my laptop (my mum was using it at the time) and PC, however, while I've got no problems with the internet on the laptop, my PC keeps losing the connection to a ridiculous degree. It'll drop the connection for over a minute at a time, come back on literally long enough for me to refresh/load 1 webpage (~5 seconds), then go back off again for another minute or two.
All the lights on the router are on and I've even cross-referenced (lacking a better term...) the internet connection between my lap top and desk top and my laptop will work fine when my PC is telling me there's no connection and nothing will load on it. It seems to me that something has happened to my desktop when the power went out but I have no idea where to begin to even try to find out what's wrong.
I've tried turning off the router by both the wall and the little button on the back of it, and I've restarted my PC twice as well and still the internet doesn't work properly. My laptop picked up the connection as soon as the router came back on with no problem but my desktop struggled to find the connection and only picked it up after turning the router off twice aand restarting the computer twice as well and as I said, when it finally did find the connection it just keeps dropping it.
cd doesn`t work and can access web for set up
View 1 Replies View Relatedhardware version D3, FW 4.10 and 4.11 same problem.
i tried with 4 wlan adapters: two of them support 802.11b/g, they always work find no matter which settings. the other two support 802.11b/g/n, as default "n" is enabled, so does DIR-615, both wlan adapters can be connected to DIR-615, they get their LAN-IP, but they can access neither DIR-615(no respone to ping) nor internet. but if i disable "n" mode either in the adapter or in DIR-615, everythin works fine, of course only with 54mbit max.
so what can i do to use the n mode?
I just received a new computer with the G41M-ES2H motherboard. Everything works as long as I use an ethernet cable, but I want to set it up to access the Internet wirelessly since I already have a wireless network. Is there some type of special set up to initialize a wireless connection, or do I need a separate wireless card to make this work. If I need a wireless card, which one is best for normal home-office type Internet use?
View 1 Replies View RelatedI'm planning on building a gaming computer and I don't want it to run on my wireless network which is in the basement. I have absolutely no experience with networking, and I need setting up a gigabyte network and trying to reaching 1GB of speed. I have heard of gigabyte networks and what gigabyte networks are and how to achieve 1GB of speed.
View 14 Replies View RelatedAll wires terminate in the basement as a RJ-45 plug, to be plugged into a switch housed in an old circuit breaker box. The first wire went off without a hitch, the jack works, the plug works, all is right with the world. The router for the home is currently plugged into that outlet so as to give the entire network as we build it internet. The second outlet is giving us problems though. I've fished the wire up the wall as before, and the length of wire is shorter than the first run. When I terminate the end upstairs as a jack, then plug in my laptop, it refuses to connect. It says the network cable is unplugged. If I terminate the cable as a plug, then plug it directly into the laptop, suddenly everything works. I have tried so far 3 different jacks, tested continuity on the jacks, and tested continuity on the wire to the jack pins to make sure the terminal block was working and everything came back green
View 9 Replies View Relatedlike today randomly my internet went down. And then everything changed back to its original like my SSID from Netcom it changed back to wireless and everything was default and also the PPP was off so i wasn't able to connect to the internet. So i went to my router setup page on the internet or whatever and turned it back on. So now like the internet on my computer which has a cable to the router works but the wireless internet doesn't work for my laptop nor ipod. I can see the connection on the laptop and ipod but when i try to connect it keeps saying that it is unable to connect.
View 7 Replies View RelatedI installed a Micro Edition of Windows 7. Everything is going properly with it except the wireless internet connection (its driver is installed and working properly as shown in Device Manager), by click Connect and typing the PW, it tries for few minutes then fail in connecting putting a yellow small circle on the wireless icon in Task bar
View 1 Replies View Relateddon't know what to do. For a good while now, at my home, the internet has been awful.Web pages barely load if at all, I can't play any online games, but when I start a download, either by torrent or regular, the download speed is perfectly fine, reaching the normal 500 kb/s. My router is TP-Link W9801G. We get TV through the router as well, and there never was any problem with it. It works fine, just like the download speed. The DNS and IP settings are all set to automatic like they should, and of course I've tried unplugging and resetting everything.I know it's not the computer's network adapter, because it's the same thing at my laptop when I connect to it wirelessly. The signal strength is at all 5 bars too
View 2 Replies View RelatedI didn't install new program or make a lot of change in my computer lately?Anyway here's the ipconfig/all result of my computer
Windows IP Configuration
Host Name . . . . . . . . . . . . : asus-95bdea2abb
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]...
I upgraded my computer with a new graphics card and power supply. When I turned it on everything ran fine except for the internet. I either get a connection with 1 bar, a connection but no internet acess, or no internet at all. Did I damage something on the motherboard that could cause this?
View 11 Replies View RelatedI've been having this DNS problem for 6 days or so. The internet doesn't work with cable nor Wi-Fi and I've tried almost everything, ping, configuring the DNS, IP, disabling everything, enabling everything, nslookup doesn't work, releasing and renewing doesn't work too, and to make things worst.(In the main computer, everything works just fine and the router settings appear to be correct too, my computer also works perfectly fine in other places with WLAN).
View 14 Replies View RelatedMy wireless is connected fine but the internet wont work.I have internet explorer and firefox and it doesnt work on either.
View 1 Replies View RelatedJason9 i'm having the exact same problem as above, don't mean to hijack but I'm using talktalk isp, I have AVG 9.0 and have a static IP and forwarded the required port on the router.
View 19 Replies View RelatedMy fn f8 button doesnt work and doesnt seen when i click. and my wireless doesn't work. I tried to download new driver but it didnt work too.
View 1 Replies View RelatedI have a W7 PC 64 bit system and I've been trying to port forward the port 25565 for my Minecraft server. However for some reason (even after port forwarding the right one) people still can't connect. When I check on Open Port Check Tool - Test Port Forwarding on Your Router It still says that the port 25565 is closed!I've even created an Inbound and Outbound rule in the Windows Firewall advanced settings. I use Avira Anti-vir fyi..
View 19 Replies View RelatedI have this Belkin wireless g router, which I had for a year. I was using the wired connection since then until I, at last, was able to use it's wireless connection but it only lasted around a week. After that, the modem light on the router kept on blinking and the internet light wouldn't turn on. I also couldn't connect to the router anymore(wired and wireless), neither could I configure it. I reset it but it still didn't work.
View 1 Replies View RelatedHow to find my WEP code for linksys when http://192.168.1.1 doesn't work.
View 2 Replies View RelatedInternet doesn't work on my laptop. after getting some worms that prevented me to open any programs, i did a recover from previous back up. but since then my internet doesn't work (with or without cable). wirelessly: my laptop says im connected to the router, but it says that i have no connection to internet. sometimes it says that i m connected to internet but even so when i try to open my browsers (ieplorer or firefox), it just says "unable to connect"With wire: when i trie to connect via a cable directly to the modem, it does the same thing, it says iam connected to the modem but i have limited access, and the browsers say that it can't open internet.i am using windows 7, have a dell computer and a belkin N1 wireless router, and using cable.i tried to restore the winsock using the netsh command, i used winsockxpfix, i used lspfix, i deleted my norton virus program, i reset my router to default, i deleted my cache-cookie-history from the browser, i think my driver are up to date, i check my manager device (they all work), nothing worked.
when i type the command ipconfig, it gives me:
ipv4 adress: 192.168.2.2
subnet mask: 255.255.255.0
default gateway: 192.168.2.1
when i type the "ping yahoo.com" i get:
4 received, 4 sent, 0 lost
my computer works fine and i can go online. i use wire for my computer and try the same wire to my laptop but not working. i tries another cable throught the router but still nothing.