Wireless Doesn't Work When Main PC Is On

Jan 16, 2012

Whenever my main PC is turned on, i get no signal from the wireless, like i cannot use my phone or laptop on the internet i use an Ethernet cable which is directly connected to my main PC my windows is also window XP and my modem model is TG782T only if my PC is turned off the wireless works

View 2 Replies


ADVERTISEMENT

Wireless Doesn't Work When Main PC Is On?

Jan 16, 2012

Whenever my main PC is turned on, i get no signal from the wireless, like i cannot use my phone or laptop on the interneti use an [COLOR=blue !important][COLOR=blue !important]ethernet[/COLOR][/COLOR] cable which is direclty connected to my main PCmy windows is also window XP and my modem model is TG782T

View 2 Replies View Related

Cisco :: Phone Doesn't Exit Back To Main Display

Sep 30, 2011

I have extension mobility configured and working fine. Except that when you log into the phone, the phone does not exit back to the main display. To get back you either need to exit out of the menus by pressing exit a few times or press the globe / web button on the phone.

View 6 Replies View Related

Cisco WAN :: 877 Doesn't Change Path And Continue Going By Main Route

Jan 24, 2011

I have a Cisco router 877. I am trying to configure a backup with ISDN.The primary line is an ADSL over pppoe. The problem is that despite the primary line fails, doesn't change the path and continue going by the main route.I have a very similar setup, also with a cisco 877, but with a normal DSL and it works perfectly.I solved the problem by activating a tracking but is slower than the other method.

View 2 Replies View Related

USB Wireless Adapter Doesn't Work?

Jun 16, 2011

I purchased a used Compaq laptop with a Realtek USB wireless adapter. The laptop came with XP Pro. I connected the adapter and everything worked great. My husband got a virus I couldn't remove. I have the CD for XP Home so I did a clean install.Windows works fine. I connected the USB wireless adapter and ran the installation disk. When I open Realtek to connect nothing appears in the available networks. I checked the device mgr and it says Realtek is working. I turned off my 2Wire gateway and then reconnected it. I doubled checked that the Windows wireless utility is disabled. Still no available networks. Everything was fine before the reinstall of Windows XP Home.

View 5 Replies View Related

Wireless Doesn't Work But Lights Up On The Router

Jan 15, 2012

like today randomly my internet went down. And then everything changed back to its original like my SSID from Netcom it changed back to wireless and everything was default and also the PPP was off so i wasn't able to connect to the internet. So i went to my router setup page on the internet or whatever and turned it back on. So now like the internet on my computer which has a cable to the router works but the wireless internet doesn't work for my laptop nor ipod. I can see the connection on the laptop and ipod but when i try to connect it keeps saying that it is unable to connect.

View 7 Replies View Related

The Wireless Connection Doesn't Work In Windows 7?

Mar 25, 2011

I installed a Micro Edition of Windows 7. Everything is going properly with it except the wireless internet connection (its driver is installed and working properly as shown in Device Manager), by click Connect and typing the PW, it tries for few minutes then fail in connecting putting a yellow small circle on the wireless icon in Task bar

View 1 Replies View Related

Wireless Doesn't Work Post Upgrade?

Mar 8, 2012

I upgraded my computer with a new graphics card and power supply. When I turned it on everything ran fine except for the internet. I either get a connection with 1 bar, a connection but no internet acess, or no internet at all. Did I damage something on the motherboard that could cause this?

View 11 Replies View Related

Wireless Is Connected But Internet Doesn't Work?

May 2, 2011

My wireless is connected fine but the internet wont work.I have internet explorer and firefox and it doesnt work on either.

View 1 Replies View Related

Wireless Doesn't Work On Satellite L650

Feb 16, 2013

My fn f8 button doesnt work and doesnt seen when i click. and my wireless doesn't work. I tried to download new driver but it didnt work too.

View 1 Replies View Related

Belkin G Wireless Router Doesn't Work?

Mar 29, 2011

I have this Belkin wireless g router, which I had for a year. I was using the wired connection since then until I, at last, was able to use it's wireless connection but it only lasted around a week. After that, the modem light on the router kept on blinking and the internet light wouldn't turn on. I also couldn't connect to the router anymore(wired and wireless), neither could I configure it. I reset it but it still didn't work.

View 1 Replies View Related

New Built Computer - Wireless Doesn't Work

Oct 7, 2011

I finished building my computer today, installed a fresh os and all the necessary drivers that came with the dvds provided, yet the wireless card doesn't even appear anywhere in the computer. The ethernet cabled one does, but not the wireless. Trying to connect to anything wireless just gives an endless searching process, with no results. I can't test the ethernet either, my router is all the way into the living room, way far out of reach.

Specs:
MB: Asus M4A88TD-V EVO/USB3
GPU: Asus 6870 HD
CPU: AMD Phenom II x4 955
I don't think anything else is necessary, is it?

View 1 Replies View Related

D-Link DIR-825 :: Wireless Simply Doesn't Work

Aug 10, 2011

The DIR-825 wireless simply doesn't work.  When I called tech support, we cleared some settings and hard-powered the unit on/off and it finally turned on the wireless radio.  A couple weeks later I pull out my laptop to use in the house via wireless and the wireless on the DIR-825 is OFFLINE AGAIN...fallen and it can't get UP.Is anyone having issues with keeping their wireless online?  OK - powered it off for 5 minutes...now the wireless is working. I think changing configuration settings causes the thing to lock up.

View 1 Replies View Related

Cisco Wireless :: Air-AP1142-e-k9 Doesn't Work With 802.11n?

Jun 29, 2012

I bought cisco AP (air-ap1142-e-k9) and we know this ap works with 802.11a/g/n same the description note on the package cartoon but my problem is when i configure that ap its work only with 802.11a/g i tries to make it works with 802.11n but fail .

View 3 Replies View Related

Wireless :: Access To User Accounts Doesn't Work?

Apr 1, 2011

I can not setup a new user, or access wireless networks that show on my laptop had a virus and the shop said they removed it but the network has not worked since it a dell inspiron 1525

View 1 Replies View Related

Get Connected With Laptop Using The Wireless Function - It Doesn't Work?

Oct 3, 2011

I just switched houses, and when I connected my computer, modem and router I found out that I have internet on my PC which is wired, but when I try to get connected with my Laptop using the wireless funtion, it doesn't work. The laptop finds the router and gets "connected" but when I try to open a web page, it says there's an issue with my internet connection, and also something about not finding the DNS...whatever that means...as you can see..

View 1 Replies View Related

Laptop Connects To Wireless Router / WPA Doesn't Work

Sep 3, 2012

I'm having an issue connecting to my wireless router. I can connect fine with security disabled, but it doesn't connect if I enable WPA. It says there's a "timeout" issue when I try to connect with WPA enabled.No one else is having issues connecting with their laptops and smartphones, so it must be a problem with my computer. [code]

View 5 Replies View Related

Wireless :: Internet Doesn't Work After Rebooted Laptop

Jul 2, 2011

my wireless internet does not work after I rebooted my laptop.I tried installing wireless internet but it failed.What do i do?

View 1 Replies View Related

Realtek RTL8187B Wireless Adapter Doesn't Work?

Nov 3, 2012

I've found my old (1, or 2 years old) Realtek RTL8187B USB 2.0 Wireless Adapter. I plugged in into my PC, but it doesn't find any networks, but it works 100% on my laptop. On PC windows said, that maybe something wrong with the driver, I reinstalled it a few times, but same happened again, again. Both has Windows 7 Professional 64-bit.

View 13 Replies View Related

Asus Wireless Radio Button Doesn't Work?

Nov 1, 2012

my werelss doesn't work becuase radio switch turn of and i can't turn it on

View 2 Replies View Related

Wireless Doesn't Work When Other Laptop Is Running Beside Mine

Nov 17, 2011

Whenever some other laptop in my room is using internet with its wifi my wifi stops working. I checked my ping when no laptop was using wifi that its runnig quite smoothly. But as soon as my room mates laptop gets connected to the same network my ping gives me output that "Request timed out".

View 2 Replies View Related

Linksys Wireless Router :: WRT54G And 196.168.1.1 Doesn't Work

Jun 23, 2010

I've been into the setup page several times over the years but now it won't load.  I recently reset it and want to setup security again. 

View 6 Replies View Related

Cisco Wireless :: Antennas Doesn't Work On AP 3600

Mar 6, 2013

I´m trying to test anntenas in a AIR-CAP3062E-A-K9  the problem is that when I´m below the AP the speed is weak, the AP es with a WLC, so I was wondering if do you know a command or a form to test the anntenas or  the Radio.

View 7 Replies View Related

Cisco Wireless :: E1000 - Password Doesn't Work

Dec 26, 2011

reset my Linksys E1000 and now I can't access wifi from my phone as neither my pw or my default ps work.

View 2 Replies View Related

Dell :: N 4030 - Wireless Network Doesn't Work?

Apr 22, 2012

i have a Dell n 4030...a few days ago i changed its windows...i use windows 7 64bit...all of drivers has installed but wireless network doesn't work while it's driver has installed and it show work properly.

View 1 Replies View Related

Ethernet Cable Doesn't Work / Wireless Connection Sometimes Works

Mar 13, 2013

I try connecting via ethernet cable and it doesn't seem to work until the administrator of the network (my brother) comes home and then turns his computer on and starts using it. However, if i switch to a wireless adapter it sometimes works (like right now) even when my brother is not using the internet. Also, i tried to connect via wifi on my macbook pro to the same server and it used to work flawlessly 100% of the time, now i can only connect once in a while for short periods of times.

View 1 Replies View Related

USB Wireless Card Doesn't Work Until Plug In An Ethernet Cable?

Jan 1, 2013

I have a Belkin usb adapter to pick up my wireless internet. problem is when i choose my network to connect to it constantly says "acquring network address". But as soon as i plug in an ethernet cable from the router the wireless starts working and i just unplug the ethernet cble. So why does my wireelss card depend on my ethernet conenction?

View 7 Replies View Related

Linksys Wireless Router :: Wrt120n Resetting Doesn't Work

Nov 29, 2012

Putting this router back in service, I reset (10 and 30 sec hold) until lights flashed. Unplugged it. Came back and connected to computer. Used default u/n = blank and p/w = admin -- doesn't work, can't get to control screen. Tried various combinations and still won't work. How do I get router to respond?

View 9 Replies View Related

Linksys Wireless Router :: E2500 Doesn't Work With Two Computers?

Aug 1, 2012

I have a mac 10.7.4 and an xbox 360 slim. Whenever  I try to play online like cod or fifa and someone else is on the computer It is super lagy, Laging. Before when I had a **bleep**y netgear 33 mb it worked perfectly fine. Now this router is has 300 +mb and it stil doesnt work. This router cost me $80 dollars. Before cisco linsys I bought a netgear not the **bleep**ty neatgear but a newer one and it still had the same problem.

View 1 Replies View Related

Linksys Wireless Router :: New Modem Doesn't Work With E2000?

Nov 7, 2012

I just received a new modem from my ISP acanac, the modem model is NetVito5300.When I connect the modem directly to my computer, I can access the internet, but if I connect through my wireless router, there's no wireless internet access. Wireless router model is CISCO Linksys E2000.I tried to download Cisco Connect Setup Software for PC and followed the step until one point it asked for my wireless username and password and I put them in correctly but it said my router was not successfully set up and failed. I should press the reset button and set the router to factory default mode, but I'm afraid I won't be able to set it up properly after doing so.What should I do to connect my new modem and wireless router properly so I have wireless internet access?

View 6 Replies View Related

Linksys Wireless Router :: URL Blocking Doesn't Work On E4200

Oct 17, 2011

I have the 1.0.03 firmware installed and URL blocking doesn't work.  I assigned the policy to the entire address range and could still access the web site I wanted to block.

View 1 Replies View Related

Linksys Wireless Router :: Cisco Pix 501 Doesn't Work After Being Unplugged

Jan 7, 2013

Trying to troubleshoot a Cisco Pix 501. We have a cable modem/router that goes to the Cisco box that then goes to my wife's computer. It's worked flawlessly since we hooked it up, even if we unplug/replug the router. Today, we unplugged the Cisco box itself to hook up a newer one. When the newer one didn't work, we tried to hook up the old one again to no avail. The led indicators seem to show that everything's working properly. We've unplugged and rebooted everything. Nothing works. The network monitor on the computer shows that it detects being connected to a network, but it always says no internet access.

View 1 Replies View Related

Cisco Wireless :: As 3500 Doesn't Work In Stand Alone Mode

May 2, 2012

We are deploying a new office and exploring the options for WLAN deployment. We were pretty impressed with 3500 series APs and that it supports CleanAir.However, we have decided to go for standalone AP deployment model now. As 3500 does not work in standalone mode, so we are looking for APs that can work in standalone mode ( and later can be converted to lightweight if needed). We can go for 1140 in that case. However, it would be better for us to know the main differences between features supported by 3500 lightweight AP and 1140 standalone AP. CleanAir looks like the main one. Are there other important ones as well?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved