I can not setup a new user, or access wireless networks that show on my laptop had a virus and the shop said they removed it but the network has not worked since it a dell inspiron 1525
View 1 RepliesI've got a WLC5508 (7.0.116.0) that is managed by WCS (7.0.172.0). I set up another WLC5508 with the same code and managed by the same WCS. Now I'd like to export all the 800 guest user accounts with the passwords from the old WLC and import them into the new WLC.
View 10 Replies View RelatedI just get to hands-on on my new WLC 5508?
1) I'm using a single subnet eg 192.168.1.0/24 for my wireless clients and i'm assigning them via the DHCP server from the WLC. As the clients are however made up of laptops and scanners, i would like to assign a range from 50-150 for the laptops and 151-250 for the scanners for easier identification. But it seems that from the WLC DHCP menu i'm not able to do this unless i segment them into a different network with different gateways.
2) Is there anyway to change the WLC user accounts password too? I dont seems to be able to find the option unless i delete the account and re-create it with the new password.
We are planning to setup a new WLAN using Cisco 2504 WLAN Controller and 1142N Access Point.Is it possible to create individual user accounts for the users those who all are connecting to this WLAN Network by using the 2504 WLAN Controller ?
View 11 Replies View RelatedHow do I setup remote login that would allow 3 or 4 people to login to the same computer.Each person would have their own Windows User Account name, with different privileges.I don't know what software could do this. The computer being connected to would be Windows 7, and there is no special network equipment besides a consumer router.
View 11 Replies View RelatedEach person would have their own Windows User Account name, with differentprivileges.I don't know what software could do this.The computer being connected to would be Windows 7, and there is no special network equipment besides a consumer router.This is a very small business and keeping costs under control is important
View 9 Replies View RelatedWe recently switched from Centennial aircard to Verizon aircard (USB760) for our laptop. We have two user accounts on our windows 7 pc. With Centennial we could switch between user accounts without closing sierra wireless manager but when I switch to another user now, a message comes up saying vzaccess manager running in another account and we cannot use the internet until we have shut it down in the account it is running in - which is a pain. I have tried right clicking vzaccess manager in all programs and it does not have a share option. I also went to properties under vzaccess manager and found a setting to share and set it up but it still will not share
View 2 Replies View RelatedHow do i create and manage 40 user accounts on a windows 7 PC.
View 1 Replies View RelatedHow do I setup remote login that would allow 3 or 4 people to login to the same computer. Each person would have their own Windows User Account name, with different privileges.I don't know what software could do this. The computer being connected to would be Windows 7, and there is no special network equipment besides a consumer router.his is a very small business and keeping costs under control is important.
View 6 Replies View Relatedhow do i create and manage 40 user accounts on a windows 7 PC.
View 1 Replies View RelatedI have the RV220W and we are mainly using PPTP for VPN access. I can not add more than 9 PPTP VPN user acounts. When I go to add a tenth account the interface just hangs and stops responding. I can delete a user and then add another user and this works fine. I can also add other types of VPN users.
View 4 Replies View Related(WLC 4400) which enables employees to browse to a custom made webpage, where they can create an account for company vistors to access the internet. It's important for the employees not use any login credentials, they arrive on a webpage where they specify the login & password which the vistor will enter to browse the internet. Is there any good link to documention about this topic?
View 3 Replies View RelatedI was looking at an XP system that has 4 user accounts. Two are limited accounts and two are admin accounts. The adapter is a DLINK DWA-125 USB adapter.When logged into one of the admin accounts, internet works fine. When logged into one of the limited accounts, internet works fine.If I switch to either of the other accounts, the adapter can't get an IP address. If I switch back to one of the accounts that works, I get an IP right away.
View 2 Replies View RelatedI am in the process of upgrading a client's firewalls from 5520s to 5525-Xs. I have 2 independent firewalls that are merging into a single firewall. Both of the source ones have a TON of user accounts defined for remote user VPN, is there any way to move these user accounts with passwords in tact?? The goal is not to have to tell the 250+ users that they need to reset their passwords at once.
View 2 Replies View Relatedcd doesn`t work and can access web for set up
View 1 Replies View RelatedI have connected my laptop to many many networks, but this is the first time this happened. I went to my moms today, and triied connecting but it only says limited access and full bars, and sometimes it doesnt even say its limited access...I have restarted modem Deleted network file (or whatever yhou call it, its in manage network. makes it like ive never joined it)Checked if connection switch was off on my laptop (Wasnt)Disconnected and reconnected multiple times Cry a little And restarted computer .What can i do?
View 1 Replies View RelatedLike others I see on this board, we've got middle- and high-school age kids whose access to FB and other sites needs to be controlled/scheduled.
I thought the DIR-655 was great, in that it has features that, on the face of it, would seem to be ideal for blocking domains and restricting access.
My problem: I've never been able to get this to work.
I've set up schedules and created lists of domains that I want to limit access to according to the schedules, but the only constraint I've ever gotten to stick is blocking access completely to the router.
*None* of the schedule-based or website-based access controls have ever worked; I'll put the block in place to my daughter's computer's MAC address so she shouldn't be able to get to youtube or facebook, save, bounce the router, but then I go by her room and she's still busily chatting away online to her FB friends.
Based on similar posts I've seen on this forum, this may not be a unique problem.
So in a nutshell, this is what I want to do:
1) Block certain computers (identifiable by MAC address)
2) from being able to get to particular named domains (and any of their sub-domains)
3) according to a schedule that I can create and modify.
My preference would be to do this in the router, but again, responses I've seen here suggest that may not be possible.
I'm trying to get 'Access Control' working so I can limit Wi-Fi time on my kids iPod touches, but the settings aren't clear and the help file is not clear whatsoever.I've been testing it with my iPhone, I have the MAC added, but none of the options available will even stop my iPhone accessing the internet over my Wi-Fi.
View 1 Replies View RelatedFor some reason I can't get Access Control/Webaccess Filters working on my Dir-655 w/ 1.35NA. I've tried it with MAC and IP Address without any success. I've also enabled/disabled/enabled DNS Relay, recreated the rules, recreated the filters, etc. Nothing.
View 14 Replies View RelatedI have a WAP54G v3.1 running firmware version 3.05.01 and a WRT54G v3 running Tomato v1.28. The WAP54G is configured client mode and works perfectly. However, I was not able to get the two to communicate with WPA2 security - maybe, I just didn't try hard enough? Both devices are capable of doing WPA2 with AES but client mode doesn't seem to work with WPA2? I had to drop back to WPA-AES to make it work. Why is this?
View 4 Replies View RelatedI am trying to remove a line in a particular access-list configured in a FWSM module using this command "no access-list <acl> line 19 x x x x" but it doesn't work. See below:
FWSM/xxx03(config)# no access-list ?
configure mode commands/options:
alert-interval Specify the alert interval for generating syslog message
106001 which alerts that the system has reached a deny
[code]...
How can I remove a line from the access-list without clearing the entire access-list?
I have a Dell Studio 1737 running Windows 7 64 bit. I turned it on today and it automatically connected to my home network as usual and when I hover over the network icon it says there is Internet Access but when I open Firefox it can not connect to any websites. When I run the automatic troubleshooter, it does not detect any problems with the connectivity.
I ran ipconfig /all and this is what came up:
Microsoft Windows [Version 6.1.7601]Copyright (c) 2009 Microsoft Corporation. All rights reserved.C:UsersDanny>ipconfig /allWindows IP Configuration Host Name . . . . . . . . . . . . : Danny-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : NoWireless LAN adapter Wireless Network Connection 2: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter Physical (code)
Just set-up a new X2000, loaded latest firmware 2.0.01, configured it via the web UI ('Browser based utility' as per the manual). Connected OK to my ADSL broadband by O2. Configured wireless, everything OK. Funny it doesn't need a user name, only a password, my prevoius WAG160N could be configured for both.Now I want to configure the Parental Controls, BUT apart from my computer name and an Android phone name, all I see in the Target Device ADD button pop-up are a list of repeated 'Network Device'. There seems no way to be able to distinguish which is which device (mix of XP & Win 7 PC's and HP Printer through a separate switch), as it does not show IP address or MAC.
I thought I may have better luck with the Cisco Connect software (which I didn't use to set-up the router). I downloaded the latest version 1.4.11194.0, and ran this on another computer with wireless. Apart from reconfiguring my static IP address to DHCP, and then connecting through DHCP, the software said it could not configure my router. So it never gets to a point where it installs any program on the computer so that I can configure Parental Controls. How do I get the router to show ALL the computer names in the list rather than 'Network Device' or is there a way to distinguish which 'Network Device' is which computer?
Whenever my main PC is turned on, i get no signal from the wireless, like i cannot use my phone or laptop on the internet i use an Ethernet cable which is directly connected to my main PC my windows is also window XP and my modem model is TG782T only if my PC is turned off the wireless works
View 2 Replies View RelatedI purchased a used Compaq laptop with a Realtek USB wireless adapter. The laptop came with XP Pro. I connected the adapter and everything worked great. My husband got a virus I couldn't remove. I have the CD for XP Home so I did a clean install.Windows works fine. I connected the USB wireless adapter and ran the installation disk. When I open Realtek to connect nothing appears in the available networks. I checked the device mgr and it says Realtek is working. I turned off my 2Wire gateway and then reconnected it. I doubled checked that the Windows wireless utility is disabled. Still no available networks. Everything was fine before the reinstall of Windows XP Home.
View 5 Replies View RelatedWhenever my main PC is turned on, i get no signal from the wireless, like i cannot use my phone or laptop on the interneti use an [COLOR=blue !important][COLOR=blue !important]ethernet[/COLOR][/COLOR] cable which is direclty connected to my main PCmy windows is also window XP and my modem model is TG782T
View 2 Replies View Relatedlike today randomly my internet went down. And then everything changed back to its original like my SSID from Netcom it changed back to wireless and everything was default and also the PPP was off so i wasn't able to connect to the internet. So i went to my router setup page on the internet or whatever and turned it back on. So now like the internet on my computer which has a cable to the router works but the wireless internet doesn't work for my laptop nor ipod. I can see the connection on the laptop and ipod but when i try to connect it keeps saying that it is unable to connect.
View 7 Replies View RelatedI installed a Micro Edition of Windows 7. Everything is going properly with it except the wireless internet connection (its driver is installed and working properly as shown in Device Manager), by click Connect and typing the PW, it tries for few minutes then fail in connecting putting a yellow small circle on the wireless icon in Task bar
View 1 Replies View RelatedI upgraded my computer with a new graphics card and power supply. When I turned it on everything ran fine except for the internet. I either get a connection with 1 bar, a connection but no internet acess, or no internet at all. Did I damage something on the motherboard that could cause this?
View 11 Replies View RelatedMy wireless is connected fine but the internet wont work.I have internet explorer and firefox and it doesnt work on either.
View 1 Replies View RelatedMy fn f8 button doesnt work and doesnt seen when i click. and my wireless doesn't work. I tried to download new driver but it didnt work too.
View 1 Replies View RelatedI have this Belkin wireless g router, which I had for a year. I was using the wired connection since then until I, at last, was able to use it's wireless connection but it only lasted around a week. After that, the modem light on the router kept on blinking and the internet light wouldn't turn on. I also couldn't connect to the router anymore(wired and wireless), neither could I configure it. I reset it but it still didn't work.
View 1 Replies View RelatedI finished building my computer today, installed a fresh os and all the necessary drivers that came with the dvds provided, yet the wireless card doesn't even appear anywhere in the computer. The ethernet cabled one does, but not the wireless. Trying to connect to anything wireless just gives an endless searching process, with no results. I can't test the ethernet either, my router is all the way into the living room, way far out of reach.
Specs:
MB: Asus M4A88TD-V EVO/USB3
GPU: Asus 6870 HD
CPU: AMD Phenom II x4 955
I don't think anything else is necessary, is it?