Asus Wireless Radio Button Doesn't Work?
Nov 1, 2012my werelss doesn't work becuase radio switch turn of and i can't turn it on
View 2 Repliesmy werelss doesn't work becuase radio switch turn of and i can't turn it on
View 2 RepliesThis type of issue has been posted time and time again by others. In this particular instance the ability to deny and allow access based on a time and day for one or more MAC id or IP address or range of addresses does not work. Because the code is so "weak" that it cannot handle a policy which passes the midnight threshold into the morning (the test is actually commented out in the code), one is forced to write one, perhaps two inverse permit rule(s). In this case, it cannot be done because the "allow" radio button is stippled out.
Some simple digging reveals that the file AccessRes.htm gets to the browser with the "allow" radio button stippled out because the token "disabled" appears in the generated html.
<input type="radio" value="allow" name="f_status2" onclick="setBLOCK()" disabled="">
I have several of these devices. They are all new V2 units. They all have the latest version of the firmware and they are all broken the same way. This behavior is the same on various flavors of browser. As an experiment, based on SOP responses I've read, I downloaded and flashed with the latest firmware (same version as delivered), and then performed the factory reset. No change. It's broken.
I can't turn on the hardware radio switch (F2) on my Asus U52F.
View 1 Replies View RelatedI am facing problems of the WPS Push Button on the Linksys WRT610N version 2.0 router which has stopped working. I don't see the Blue LED blinking. The WPS button no more works on the router. It was working before. I did a firmware upgrade. Could this be the cause?
View 4 Replies View RelatedRegion : UnitedKingdom
Model : TD-W8951ND
Hardware Version : V5
Firmware Version : TD-W8951ND_v5_120522
ISP : N/A
The wireless adapter settings page has an entry for 'PIN' and 'PBC' for WPS.Selecting either always results in the client station requesting the routers pin, indicating that the pushbutton selection is not working properly.The router was doing this with the version of hardware that it was shipped with. i have downgraded to 120522 and the router is behaving exactly the same.Has anyone successfully configured the router for pushbutton connection? do not suggest that we use the pin setting as we have a requirement for dumb devices to connect to wireless and they only support pushbutton connection.
We hav ea 5508 pair running in HA mode. Initially the conrollers were running the 73..101.0 code. We were having issues where the primary controller would software reset (according to show sysinfo), the secondary (HA SKU) would take over and then after a few hours the secondary would also software reset and the primary would take over. Also I notice that after this happens that the Tx Power Control doesn't seem to adjust the A radio settings, most of the radios are at the 6 level. Normally they are 1, 2, or 3. Last week I upgraded to 7.3.112.0, later that day the same thing happened.
View 1 Replies View RelatedMy laptop is an Optima Centoris v662 and i recently had Microsoft service pack 3 installed over windows vista. ever since i did, my wireless radio turned off and the switches (fn f10 and the seperate switch just above the keyboard) wont work. my wireless card is a intel(R) PRO/Wireless 3945AGB but i dont think that is the problem.
View 1 Replies View RelatedWhenever my main PC is turned on, i get no signal from the wireless, like i cannot use my phone or laptop on the internet i use an Ethernet cable which is directly connected to my main PC my windows is also window XP and my modem model is TG782T only if my PC is turned off the wireless works
View 2 Replies View RelatedI purchased a used Compaq laptop with a Realtek USB wireless adapter. The laptop came with XP Pro. I connected the adapter and everything worked great. My husband got a virus I couldn't remove. I have the CD for XP Home so I did a clean install.Windows works fine. I connected the USB wireless adapter and ran the installation disk. When I open Realtek to connect nothing appears in the available networks. I checked the device mgr and it says Realtek is working. I turned off my 2Wire gateway and then reconnected it. I doubled checked that the Windows wireless utility is disabled. Still no available networks. Everything was fine before the reinstall of Windows XP Home.
View 5 Replies View RelatedWhenever my main PC is turned on, i get no signal from the wireless, like i cannot use my phone or laptop on the interneti use an [COLOR=blue !important][COLOR=blue !important]ethernet[/COLOR][/COLOR] cable which is direclty connected to my main PCmy windows is also window XP and my modem model is TG782T
View 2 Replies View Relatedlike today randomly my internet went down. And then everything changed back to its original like my SSID from Netcom it changed back to wireless and everything was default and also the PPP was off so i wasn't able to connect to the internet. So i went to my router setup page on the internet or whatever and turned it back on. So now like the internet on my computer which has a cable to the router works but the wireless internet doesn't work for my laptop nor ipod. I can see the connection on the laptop and ipod but when i try to connect it keeps saying that it is unable to connect.
View 7 Replies View RelatedI installed a Micro Edition of Windows 7. Everything is going properly with it except the wireless internet connection (its driver is installed and working properly as shown in Device Manager), by click Connect and typing the PW, it tries for few minutes then fail in connecting putting a yellow small circle on the wireless icon in Task bar
View 1 Replies View RelatedI upgraded my computer with a new graphics card and power supply. When I turned it on everything ran fine except for the internet. I either get a connection with 1 bar, a connection but no internet acess, or no internet at all. Did I damage something on the motherboard that could cause this?
View 11 Replies View RelatedMy wireless is connected fine but the internet wont work.I have internet explorer and firefox and it doesnt work on either.
View 1 Replies View RelatedMy fn f8 button doesnt work and doesnt seen when i click. and my wireless doesn't work. I tried to download new driver but it didnt work too.
View 1 Replies View RelatedI have this Belkin wireless g router, which I had for a year. I was using the wired connection since then until I, at last, was able to use it's wireless connection but it only lasted around a week. After that, the modem light on the router kept on blinking and the internet light wouldn't turn on. I also couldn't connect to the router anymore(wired and wireless), neither could I configure it. I reset it but it still didn't work.
View 1 Replies View RelatedI finished building my computer today, installed a fresh os and all the necessary drivers that came with the dvds provided, yet the wireless card doesn't even appear anywhere in the computer. The ethernet cabled one does, but not the wireless. Trying to connect to anything wireless just gives an endless searching process, with no results. I can't test the ethernet either, my router is all the way into the living room, way far out of reach.
Specs:
MB: Asus M4A88TD-V EVO/USB3
GPU: Asus 6870 HD
CPU: AMD Phenom II x4 955
I don't think anything else is necessary, is it?
The DIR-825 wireless simply doesn't work. When I called tech support, we cleared some settings and hard-powered the unit on/off and it finally turned on the wireless radio. A couple weeks later I pull out my laptop to use in the house via wireless and the wireless on the DIR-825 is OFFLINE AGAIN...fallen and it can't get UP.Is anyone having issues with keeping their wireless online? OK - powered it off for 5 minutes...now the wireless is working. I think changing configuration settings causes the thing to lock up.
View 1 Replies View RelatedI bought cisco AP (air-ap1142-e-k9) and we know this ap works with 802.11a/g/n same the description note on the package cartoon but my problem is when i configure that ap its work only with 802.11a/g i tries to make it works with 802.11n but fail .
View 3 Replies View RelatedI have a P5QL-E and i cant get this network adapter to work. I enabled it in BIOS, but nothing happens in win7, driver says i dont have any device isntalled.
View 3 Replies View RelatedI can not setup a new user, or access wireless networks that show on my laptop had a virus and the shop said they removed it but the network has not worked since it a dell inspiron 1525
View 1 Replies View RelatedI just switched houses, and when I connected my computer, modem and router I found out that I have internet on my PC which is wired, but when I try to get connected with my Laptop using the wireless funtion, it doesn't work. The laptop finds the router and gets "connected" but when I try to open a web page, it says there's an issue with my internet connection, and also something about not finding the DNS...whatever that means...as you can see..
View 1 Replies View RelatedI'm having an issue connecting to my wireless router. I can connect fine with security disabled, but it doesn't connect if I enable WPA. It says there's a "timeout" issue when I try to connect with WPA enabled.No one else is having issues connecting with their laptops and smartphones, so it must be a problem with my computer. [code]
View 5 Replies View Relatedmy wireless internet does not work after I rebooted my laptop.I tried installing wireless internet but it failed.What do i do?
View 1 Replies View RelatedI've found my old (1, or 2 years old) Realtek RTL8187B USB 2.0 Wireless Adapter. I plugged in into my PC, but it doesn't find any networks, but it works 100% on my laptop. On PC windows said, that maybe something wrong with the driver, I reinstalled it a few times, but same happened again, again. Both has Windows 7 Professional 64-bit.
View 13 Replies View RelatedWhenever some other laptop in my room is using internet with its wifi my wifi stops working. I checked my ping when no laptop was using wifi that its runnig quite smoothly. But as soon as my room mates laptop gets connected to the same network my ping gives me output that "Request timed out".
View 2 Replies View RelatedI've been into the setup page several times over the years but now it won't load. I recently reset it and want to setup security again.
View 6 Replies View RelatedI´m trying to test anntenas in a AIR-CAP3062E-A-K9 the problem is that when I´m below the AP the speed is weak, the AP es with a WLC, so I was wondering if do you know a command or a form to test the anntenas or the Radio.
View 7 Replies View Relatedreset my Linksys E1000 and now I can't access wifi from my phone as neither my pw or my default ps work.
View 2 Replies View Relatedi have a Dell n 4030...a few days ago i changed its windows...i use windows 7 64bit...all of drivers has installed but wireless network doesn't work while it's driver has installed and it show work properly.
View 1 Replies View RelatedI try connecting via ethernet cable and it doesn't seem to work until the administrator of the network (my brother) comes home and then turns his computer on and starts using it. However, if i switch to a wireless adapter it sometimes works (like right now) even when my brother is not using the internet. Also, i tried to connect via wifi on my macbook pro to the same server and it used to work flawlessly 100% of the time, now i can only connect once in a while for short periods of times.
View 1 Replies View RelatedI have a Belkin usb adapter to pick up my wireless internet. problem is when i choose my network to connect to it constantly says "acquring network address". But as soon as i plug in an ethernet cable from the router the wireless starts working and i just unplug the ethernet cble. So why does my wireelss card depend on my ethernet conenction?
View 7 Replies View RelatedPutting this router back in service, I reset (10 and 30 sec hold) until lights flashed. Unplugged it. Came back and connected to computer. Used default u/n = blank and p/w = admin -- doesn't work, can't get to control screen. Tried various combinations and still won't work. How do I get router to respond?
View 9 Replies View Related