TP-Link ADSL2+ Wireless :: TD-W8951ND / WPS Push-button Configuration Does Not Work

Apr 8, 2013

Region : UnitedKingdom
Model : TD-W8951ND
Hardware Version : V5
Firmware Version : TD-W8951ND_v5_120522
ISP : N/A

The wireless adapter settings page has an entry for 'PIN' and 'PBC' for WPS.Selecting either always results in the client station requesting the routers pin, indicating that the pushbutton selection is not working properly.The router was doing this with the version of hardware that it was shipped with. i have downgraded to 120522 and the router is behaving exactly the same.Has anyone successfully configured the router for pushbutton connection? do not suggest that we use the pin setting as we have a requirement for dumb devices to connect to wireless and they only support pushbutton connection.

ADVERTISEMENT

Linksys Wireless Router :: WPS Push Button On WRT610N Does Not Work?

Mar 28, 2012

I am facing problems of the WPS Push Button on the Linksys WRT610N version 2.0 router which has stopped working. I don't see the Blue LED blinking. The WPS button no more works on the router. It was working before. I did a firmware upgrade. Could this be the cause?

View 4 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8951ND V4 - Does It Supports MAC Spoofing

Mar 31, 2013

Region : India
Model : TD-W8951ND
Hardware Version : V4
Firmware Version :
ISP :

The product manual of TD-W8951ND V4 states that it's supports MAC spoofing. But in the product itself, it is nowhere to be found. I tried contacting the customer care via email but they are too lazy to respond. If they disabled this feature then why in the world they mentioned in the manual. I double checked the manual before buying this model. Now I stuck with it.

View 4 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8951ND / Converting LAN To WAN Port?

Jan 1, 2013

Region : India
Model : TD-W8951ND
Hardware Version : V1
Firmware Version : 5.0.0
ISP : Beam Telecom

I recently bought this device in hurry . My ISP has directly connected RJ45 cable to my laptop .So i need to use this device for sharing internet to my wireless devices .IS it possible to convert Rj45 to Rj11 if so let me know the process .I have seen interenet about converting lan port to wan for TD-W8960 device . but GUI administration is quite different for my device .

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8951ND - Can't Ping Computers In LAN

Dec 9, 2012

Region : Kazakstan
Model : TD-W8951ND
Hardware Version : V4
Firmware Version : 4.0.0 Build 120207 Rel.10587
ISP : Megalne

I have two comps in LAN (Ethernet) - one (Comp1) in WinXP, another (Comp2) in Win7. IPs for both comps are assigned by DHCP. Internet is available for both Comps and for assigned wireless units. So the router is configured almost well. But I lost my home net: can't see or ping anything in LAN. Setting of static IPs (192.168.1.4 and 192.168.1.6 are permitted)

View 2 Replies View Related

Tp-link Adsl2+ Wireless :: Td-w8951nd / Can't Access Wifi From Tablet

Nov 8, 2012

Model : TD-W8951ND
Hardware Version : V3
Firmware Version :
ISP : BSNL DATAONE

my tablet show wifi status connected ... signal quality... but cant access internet ...

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8951ND - Change Static IP Address?

Feb 24, 2013

Region : UnitedKingdom
Model : TD-W8951ND
Hardware Version : V5
Firmware Version : 5.0.0 Build 120703 Rel.29030
ISP :

I have setup some static addresses but now some of them need to change... But I can't see how to amend the DHCP table..There must be a way of doing this beyond altering the DHCP range so I can put them all in againLAN Setup.JPG.

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: No Web Access To TD-W8951ND - ACL Blocked All But Telnet

Dec 6, 2012

Region : UnitedKingdom
Model : TD-W8951ND
Hardware Version : V1
Firmware Version : Latest
ISP :

In trying to make sure it was NOT wide open to the internet (amongst many other problems of setting it up, which I ,may address later if I can actually connect to the thing ever again) I told it to only accept connections from a range of address inside the LAN. Now it wont accept anything except telnet from the LAN.Short of wiping out 6 hours of trial and error configuration and resetting it, are there any other options I can exercise via the telnet interface?

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8951ND V5 No Longer Have Mac Spoofing Option

Feb 20, 2013

Region : Malaysia
Model : TD-W8951ND
Hardware Version : V5
Firmware Version : V5
ISP : Streamyx

TD-W8951ND V5 No longer have Mac Spoofing support.i just bought this modem since my old one is faulty. and i realize that my modem is V5 my previous modem is V4 and there is Mac Spoofing support there.

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8951ND - Unable To Upgrade Firmware To V5 For It

Apr 29, 2013

Region : India
Model : TD-W8951ND
Hardware Version : V4
Firmware Version : 4.0.0 Build 120607
ISP : Airtel[/COLOR]

I have wifi connectivity issues. After continues usage the wifi connection fails suddenly. And doesn't work till I restart it.

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8951ND - Remembers Only A Dozen Of Logs?

Feb 16, 2013

Region : Poland
Model : TD-W8951ND
Hardware Version : V5
Firmware Version : 5.0.0 Build 120522 Rel.23978
ISP : Orange/TPSA

My router TD-W8951ND remembers only a dozen of latest logs. Previous, older logs disappears. Why? Is there any way to force router to keep logs from, for example, the last 12 or 24 hours?It is important to me because i have some problems on my adsl line and i want to know what happens with connection while I am not in home or when I sleep.If it will be necessary I am able to log onto my router using Telnet, just give me required commands to fix this problem with logs.

View 3 Replies View Related

TP-Link ADSL2+ Wireless :: W8951ND Unable To Get Internet Through LAN Ports

May 7, 2013

Region : India
Model : TD-W8951ND
Hardware Version : V5
Firmware Version :

4 lan ports problem in my modem. Able to get internet through wifi but unable through lan ports.checked in 2 pcs and 1 laptop

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8951ND Wi-Fi Connecting With IPhone And IPad

Dec 23, 2012

Region : India
Model : TD-W8951ND
Hardware Version : V4
ISP : MTNL

I m using TD-W8951ND wifi router with MTNL connection. The LAN connection with PC works just fine but i m not able to connect my iphone or ipad with the router. I have reset the router many times and also retored my iphone but still no luck. Pl tell me what are the settings needed for wifi connections.. Currently i have set the wireless mode to 802.11 b+g+n. Setting it to just 802.11 b sometimes connects with the iphone but never with ipad.

View 6 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8951ND - Changing Interface From Orange To Blue

Feb 17, 2013

-Region : Poland
-Model : TD-W8951ND
-Hardware Version : V5
-Firmware Version : 5.0.0 Build 120522 Rel.23978
-ISP : Orange/TPSA

Is there any way to change web interface / firmware from orange version to blue version? Blue version has more options and better "System log" presentation page.

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8951ND - Constantly Repeated Errors In Logs

Feb 16, 2013

Region : Poland
Model : TD-W8951ND
Hardware Version : V5
Firmware Version : 5.0.0 Build 120522 Rel.23978
ISP : Orange/TPSA

On my router TD-W8951ND constantly there are the same type errors, while using computer conected to the router:

Code:
2/16/2013 17:24:8> netMakeChannDial: err=-3000 rn_p=80544b08
2/16/2013 17:24:13> Last errorlog repeat 2 Times

[Code].....

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8951ND Generating High Data Usage With No Devices Connected

May 3, 2013

Region : UnitedKingdom
Model : TD-W8951ND
Hardware Version : V5
Firmware Version : 22.05.2012
ISP :

I have a TD-W8951ND v5 on the latest firmware.

I recently broke my broadband data cap which surprised me as I had not been using the internet much.

I only have tablet which I switched off having first checked the router to make sure there were no other wireless connections and adding MAC address filtering to be sure no one else was stealing my bandwidth. With just my router connected to the ISP, my ISP has recorded 170MB of downloaded data in 3.5 hours. Switching off the router stops the traffic being recorded (as you would expect), but when switched back on the large data transfers start up again.

I have plugged in an older router (not wireless) and no traffic is generated, so it seems to be the TP-Link router rather than my ISP or ADSL circuit that is at fault.

View 1 Replies View Related

Cisco Infrastructure :: Push Button On Nexus 7010?

Jun 25, 2012

I saw a push bottom below the fan module of the nexus 7010. What that is for?

View 3 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8961ND - Port Forwarding Does Not Work?

Mar 10, 2013

Region : Italy
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : 3.0.0 Build 120720 Rel.09287
ISP : alice

A couple of weeks ago I have bought a TD-W8961ND in replacement of my old modem/router (of another brand, to upgrade from Wireless G to N). I tried to replicate in the new router something similar to my old setup, so I programmed Virtual Servers (under the NAT menu) with the following rules: NATRules.jpg in an attempt to:

- grant access from "outside" Internet to my web server

- have a Wakeup-On-LAN from "outside" Internet ..etc.. without success. Please note that:

- I have successfully setup a DDNS server to reach my modem router from outside

- as for WOL, I defined my subnet mask as 255.255.255.128

- I have not set any other rule, nor in NAT, nor in routing or other

- I tried also with firewall disabled

- I do my testing by means of a smartphone with wireless disabled and Internet connection via mobile service provider

- Both the above mentioned functions were working with my old modem/router (and still work on LAN), and I have not changed other things (PC setup etc)

View 14 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 / FTP Does Not Work After Bandwidth Control Enabled

Mar 7, 2013

Region : India
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : MTNL

After lot of troubleshooting and efforts I figured out there seems to be BUG with routers firmware 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n.When you enable Bandwidth control, FTP stops working from Internet. However, it does work from local network. When you disable Bandwidth control, FTP starts working from internet as well as local network.

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: Configuration ADSL For TD-W8968

Feb 7, 2013

Region : Brazil
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : Telemar Oi Velox

Very weird situation... can't get full speed with the TD-W8968 with my DSL link..

View 12 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 Don't Work The Virtual Servers To Forwarding Ports

Feb 24, 2013

Region : Mexico
Model : TD-W8968
Hardware Version : V1
Firmware Version : the last version of this web page, i forgot number
ISP : TELMEX (infinitum)

i have some problems to configure the port forwarding in my router, don't it work ! but the port number 80 it works with my sub-domain in the internet. after i change this port to 8080 still dont work the port forwarding. the FTP server its ok.

[code]......

View 3 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 - Firmware Updates Overwritten Configuration

Apr 17, 2013

Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : TD-W8968_V1_130217

Having just updated the firmware I was surprised that it overwrote my configuration (WAN LAN & WiFi) settings.Is this normal for TP-Link firmware updates ?

View 3 Replies View Related

TP-Link ADSL2+ Wireless :: W8968 Configuration Steps For Dongle (ZTE2736)

Apr 6, 2013

Region : India
Model : TD-W8968
Hardware Version : Not Clear
Firmware Version :
ISP :

I am planning to buy TD-W8968 300Mbps Wireless N USB ADSL2+ Modem Router, which supports 3G dongle over its usb port.I already had Reliance Netconnect + Dongle (ZTE2736) .I want to use this Dongle with W8968.Is it possible to use this Dongle? What are the configuration steps for this dongle with W8968?

View 4 Replies View Related

Cisco Wireless :: WLC5508 - Push Same Configuration On Multiple APs In 1 Shot?

May 1, 2013

is there a way on a WLC5508 to push the same configuration on multiple APs in 1 shot?I need to change the High Availability settings on most of the APs (not all). And the only solution i find is to do 1 by 1...

View 6 Replies View Related

Cisco :: LMS 3.1 Not Able To Fetch Or Push Configuration

Apr 21, 2010

Using LMS 3.1 in win 2003 SP2. Recently experiencing a problem, not able to fetch/push config for the n/w devices. I deleted and re added the device to lms and found able to perform the task. There was no connectvity issue during the problem.

View 6 Replies View Related

Asus Wireless Radio Button Doesn't Work?

Nov 1, 2012

my werelss doesn't work becuase radio switch turn of and i can't turn it on

View 2 Replies View Related

W8951ND - TP Link Router Disconnect In Every 5 Minutes?

Mar 18, 2013

i have TP link router model no TD W8951ND.. i can access internet but wifi disconnects in every 5 mins.. i have to connect again but as soon as i got connection after 5 or 10 min it disconnects again..

View 1 Replies View Related

TP Link Td W8951nd - Connecting To Router / Configuring Settings?

Feb 3, 2013

I now have a tp link td w8951nd.

The problem is, I wanted to log into the router to reconfigure some of the settings and to see if I have the option of using a VPN, only the router will not let me connect. I pinged the router and established that the installation engineer had changed the default LAN ip but whenever I try to navigate to this ip address by. Browser (Firefox) says unable to connect.I have tried a wired connection and rebooting procedures.

View 5 Replies View Related

N300 ADSL2+ Modem Router DGN2200v3 - Wired Connection Doesn't Work / Wireless Does

Mar 11, 2013

I tried restarting the router and the computer, but to no avail. I've also tried with another ethernet cable and tried several ports, but that did not work, either. What is interesting is that other computers in the household connect to the router via wire without problems. I suppose that means something's wrong with my computer, however, I do not know what. I have a netgear router which says "N300 Wireless ADSL2+ Modem Router DGN2200v3" on the back. My computer has Windows 7 Home Premium installed. I'm using a DSL connection, and Avast! antivirus.

View 7 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8970 - TP-LINK USB Printer Controller Is Causing BSOD?

Apr 12, 2013

Region : Portugal
Model : TD-W8970
Hardware Version : V1
Firmware Version :
ISP :

Two week ago I bought the TD-W8970 ADSL router model. Im using a canon pixma IP4700 printer connected to the router USB print server port and everything is working without any issues if I just look to the router functionalities.

However since that Ive installed TP-LINK USB Printer Controller, my both computers (desktop with windows 7 and laptop with windows 8) are getting very often some BSOD.

I was editing all files automatically generated by windows on this cases and if seems that the cause of this issue is the file TplinkUDSMBus.sys (installed by USB Printer Controller).

To check the impact of this, Ive uninstalled the TP-LINK USB Printer Controller software from my laptop and I dont have any BSOD since 5 days ago. In the desktop Im still have the same issue.

The router print server is a nice functionality and I really want to use it.

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 Virtual Server Link Missing Under Nat Menu

Mar 3, 2013

Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : latest
ISP : french orange

I am trying to set up port forwarding on this router but it seems I need to use virtual servers but in all the guides there is a menu for this under the advance settings nat menu.I do not have that option, I have downloaded the latest firmware but still nothing.

View 1 Replies View Related

Linksys Cable / DSL :: Can WAG200G Work With ADSL2 / VDSL

May 2, 2011

I have been using a Linksys Wireless-G ADSL  WAG200G, Annex-A  Gateway Router and it has been fine, now my ISP have told me that they are modernising the network and will need a router capable of managing ADSL2/ VDSL connections, so will my router be able to do that or will I have to buy a new one? It has firmware 1.01.09?Edit: I see in the DSL Modulation menu which is set at present to "Multimode" I also have options to select ADSL2, ADSL2+, ADSL2 AnnexM, ADSL2+ AnnexM and ASDL2 AnnexL but I do not see any mention of "VDSL"

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: Using A TD-W8970 With A NAS?

Feb 28, 2013

Region : Australia
Model : TD-W8970
Hardware Version : V1
Firmware Version :
ISP :

Im having issues setting up port forwarding with my Synology NAS.

My house is all connected via network cable, going to a main 24-port switch, which is connected to a Modem/Router (TP-LINK in this case). I can access the NAS from anywhere on my home network, send and receive is fine. I previously used a Billion modem/router in the same config and it all worked fine.

The problem is that when going through the Synology setup, it fails to see the tp-link. So therefore I cannot run its port forwarding program to setup all my ports. Which in turn the NAS can't access the internet. I have started going through the port-forward setting on the router interface, and manually entered the ports - i realized that I'm limited to the number of ports i'm allowed to open! I have also run a port testing program, some are successfully opened the others are not.

Is there some button i need to check or switch on the modem?

View 3 Replies View Related

Cisco WAN :: ADSL2+ Configuration On 2800

Dec 28, 2010

We have a customer in the UK, who is starting to deploy ADSL2+ circuits for the new sites they are adding to their BT IPClear MPLS network.We want to standardise with a config for each site, but to date have found that we seem to be using a different config for each site. Some are configured using a dialer interface & some using a virtual template.

Why on some of the sites the virtual template method works & on others we have to configure a dialer interface. Also in regards to the speeds, what should we configure as bandwidth statements & also for traffic shaping. I know that the ADSL2+ circuits can operate at various speeds, but am i right in thinking these higher speeds are the clock rate of the line & with the BT IPClear product, the customer only gets the agreed/paid for bandwidth.

As this figure is different in both directions, when the traffic shaping is configured using vbr-rt command, is the amount entered based on the slower upstream bandwidth on the circuit.

View 7 Replies View Related

TP-Link ADSL2+ Wireless :: Can't Connect With TD-W8970

Feb 25, 2013

Region : Italy
Model : TD-W8970
Hardware Version : V1
Firmware Version : TD-W8970_V1_130201

I just bought online a brand new TD-W8970 modem/router but I'm in trouble with getting ADSL working.I set up a PPPoE connection with the settings from my ISP but the ADSL Led on the device is solid OFF and in the Admin section it says DSL Status: Not Connected.

[code]...

View 5 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8970 - NAS Not Being Seen On Network

Apr 16, 2013

Region : UnitedKingdom
Model : TD-W8970
Hardware Version : V1
Firmware Version :
ISP : Virgin

I've just replaced my aging ZyXel Wireless Router with a TD-W8970 which connects to the internet with no problems whatsoever. However, I have an ethernet connected Western Digital MyBookLive NAS which is happily allocated an IP addess but does not show up on my network on my PC (Windows Vista - fully patched). A usb connected pen drive and exactly the same. Am I missing something blindingly obvious? On the ZyXel the NAS worked with no problems whatsoever.

The problem with the NAS was my internet security Bitdefender. For some reason, on installing the TP-W8970, it switched my firewall status to public from home/office. Corrected that and the NAS can now be seen over the network. This does not fix the USB attached pen drive not being seen problem though.

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: Why TD-W8968 Use Two Channels

Apr 17, 2013

Region : India
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP :

According to inSSIDer the router seems to be using two wifi channels (10+6) and inSSIDer is recommending to move to a standard channel (1,6,11).

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: W8960N Need To Add A USB HDD Server

Nov 8, 2012

Region : UnitedKingdom
Model : TD-W8960N
Hardware Version : V3
Firmware Version : 1.4.0 Build 111130 Rel.55990n
ISP : BT Broadband

Just got myself a new Modem/Router (TD-W8960N), and it wasn't until I had it all up and running that I realised it didn't have USB port on the back.Anyways, I was wondering how I could go about fixing this? I stumbled upon this (TP-Link TD-8817) on Amazon and wasn't sure if I could attach this to it in bridged mode or something. This has the USB socket I need. If this was all I needed, how do they connect together? I have a BT connection btw.Also, I have a Justop Android 4.0 TV Box (media player). Would this be able to see the HDD for streaming movies.

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8901G - Cannot Access Some Url

Jan 12, 2013

Region : Others
Model : TD-W8901G
Hardware Version : V6
Firmware Version :
ISP :

problem with filtering

Region : Syria
Model : TD-W8901G
ver 6.0
54Mbps wireless G ADSL2+:

I used the url filter utility inside the router program. I put some url for example www.google.com, I wanted to try the filtering cababilty, Later I deleted all these adresses , but unfortunatley it keeps telling me the following message: "The system returned: (110) Connection timed out The remote host or network may be down. Your cache administrator is webmaster@proxy1."

View 1 Replies View Related

D-Link DIR-655 :: Function Of Square Button On The Side

Jan 9, 2011

The DIR-655 has a square button on the side of it. It looks like a refresh button. I don't know what it does, but I have pressed that button before, thinking it does something good. Nothing bad has happened after I pressed it , but I have no clue about what is does.

View 5 Replies View Related

Using TP-LINK Wireless ADSL2+ Router As Relay Unit?

Jan 10, 2012

I use a wired network connection to my neighbours Vodafone Modem (We share his monthly cost). I also have a TP-LINK 54M Wireless ADSL2+ Router from a previous broadband contract with a landline phone company. Is it possible to reset and configure the TP-LINK Router to act as a relay unit, connected to the network cable, so I can then use my laptop elsewhere in the house?

View 3 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8961ND Doesn't Assign IP To PCs Through Another AP

Apr 1, 2013

Region : Spain
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : 3.0.0 Build 120524 Rel.05221
ISP :
linksys1.jpg
I have wifi at home this link installed.
192.168.1.1 is a TD-W8961ND
192.168.1.4 is a linksys wrtt54gl

And I have two problems.

1) I can not see any desktops in my local net, and with old router I could see all, for example (diskstation, dm800, etc...) In my macbook air I can not see my NAS Synology and with old router I do.

2) All PCs that are conected to 192.168.1.4 have not IP. and DHCP in TD-W8961ND is activated.

View 5 Replies View Related

Tp-link Adsl2 Wireless :: Td-w8151n Can't Connect To Net From Wifi

May 7, 2013

Region : India
Model : TD-W8151N
Hardware Version : V3
Firmware Version : 120530
ISP : BSNL

Net is working smoothly from LAN, but no success on wifi. Over wi-fi, I can connect to router but cannot access net.

View 2 Replies View Related

ADVERTISEMENT