Gigabyte GA-G41M-ES2H Wireless Connectivity?
Apr 8, 2011
I just received a new computer with the G41M-ES2H motherboard. Everything works as long as I use an ethernet cable, but I want to set it up to access the Internet wirelessly since I already have a wireless network. Is there some type of special set up to initialize a wireless connection, or do I need a separate wireless card to make this work. If I need a wireless card, which one is best for normal home-office type Internet use?
View 1 Replies
ADVERTISEMENT
Oct 18, 2011
I have a Realtek PCI GBE Family Controller. I recently reinstalled Win7 and it loaded drivers for the card automatically. I actually didn't notice the speed issue until I went to move stuff around on the home network.
The Device Manager lists the above NIC. Under Properties I have:
Auto Disable Gigabit = Disabled
Speed & Duplex = Auto Negotiate
I tried setting Speed & Duplex to 1.0 Gbps Full Duplex but I only interrupted a file transfer by doing this. (The Network icon in the System Tray indicated that the network connection was lost.)
I am using Cat5E 1 Meter or less cables. I have 2 PCS next to my desk with a D-Link Gigabit Switch sitting on top of one of the computers. AFAIK all ports on the switch support Gigabit.
View 2 Replies
View Related
Feb 19, 2011
GA-890FXA-ud5 is supposed to have built in 802.11n. I just upgraded my Verizon modem to mifi2200 but cant's get them to play nice
View 1 Replies
View Related
Mar 2, 2013
I'm planning on building a gaming computer and I don't want it to run on my wireless network which is in the basement. I have absolutely no experience with networking, and I need setting up a gigabyte network and trying to reaching 1GB of speed. I have heard of gigabyte networks and what gigabyte networks are and how to achieve 1GB of speed.
View 14 Replies
View Related
Feb 20, 2013
i cant install network controller where do i can download network controller driver for gigabyte 8ipe1000,i cannot find it?
View 1 Replies
View Related
Feb 23, 2011
I have recently installed a new motherboard (Gigabyte X58A-UDR3R) and i've been having a problem where when i plug my ethernet cable in to my on board lan nothing is being detectedOn start up the with the cable plugged in the ethernet light will flicker letting me know its being detected then randomly shuts off when i reach my desktop. This happens and i dont have a connection to the internet
View 1 Replies
View Related
Jan 17, 2013
i need Ethernet and network controller drivers for gigabyte Q1500M
View 1 Replies
View Related
Aug 22, 2011
I don't have a router but I need to provide internet to two devices. I have a Gigabyte P55A-UD3 motherboard and a Linksys ethernet PCI card. Is there any way I can connect the Internet to my motherboard, and then provide internet to my second device via the PCI card?
View 5 Replies
View Related
Nov 28, 2011
I am assuming, that the slowest component on a network determines the connect speed? I am having a small network with 4 pcs and 2 of them show 1GB connect speed while the other 2 show 100MB. What would cause 2 units to run at the 100MB speed on a Gigabyte-Switch and Router?
View 3 Replies
View Related
Mar 30, 2011
Noticed the last couple days that pages weren't loading on my laptop. Looked at the network status for the laptop and noticed that my network speeds would fluctuate from 54Mbps to 1Mbps, and various speeds in between. I had never had this happen before (I've had this router, a Linksys, for about 6 years). I thought maybe something was going on with the laptop. Grabbed my wife's laptop and she had the same issue. So, I checked the wired towers - their speeds are running at 100% all the time, no fluctuation. So, it has to be something with my router, but I'm not familiar with how to diagnose, etc. The router has a 3rd party firmware (DD-WRT) flashed on it, in case that matters. But I've had that on there about 4 years, nothing new. I've done a DHCP release and renew.
View 14 Replies
View Related
Sep 9, 2011
I got the urge to play a Windows game, so I used my restore disks to install XP on my Acer Aspire One A150. Unfortunately, my wireless card does not work anymore (?). I am dual-booting with Ubuntu 10.10 at the moment and my wireless card works there with no problem.I get a Limited or No Connectivity error every time.I'm connected to a router, which I have reset and works okay in Linux. I am connected currently using a USB D-Link N-Adapter, however, despite being "N" is considerably slower and inconvenient.
[code]...
View 13 Replies
View Related
Dec 11, 2011
I recently moved into a new apartment and when I connect to the router using the wireless. I get limited connectivity, it accepts the security key but can not get the internet. Connect wirelessly to another router within range and can connect to the internet via that. Also if I connect a ethernet cable to the router it gives me internet access. I couldn't see any settings in the routers menu that would prevent me from connecting(but im probably being blind).
Two other guys I'm sharing the apartment with can connect to the internet wirelessly with no issues. The router is a Thomson TWG870UIR.
Windows Vista Ultimate OS.
Connection-specific DNS Suffix:
Description: Intel(R) Wireless WiFi Link 4965AGN
Physical Address: 00-13-E8-0D-82-4D[code].....
View 5 Replies
View Related
Jul 14, 2011
i have a windows 7 laptop that ive just recently purchased. The wireless Connectivity was working fine last week, now suddenly it just wont work. I believe that its due to a program i recently installed that goes by the name of Connectify. I have uninstalled it yet still whenever i try connecting to any router wirelessly, the PC displays limited or no connectivity. On the other hand When i connect my laptop to a router via an Ethernet cable everything is fine. In case you are wondering, im currently using a 3g usb wireless stick to surf the internet, but i dont want to use it as i already have a router to use.
View 14 Replies
View Related
Nov 18, 2011
My computer constantly goes to 'limited connectivity', for no reason. Everyone else's computer is fine, it's just mine. I have to restart the wireless access point router to get it to connect again, even though everyone else connected to the AP can access the internet. Even restarting my computer doesn't fix it. It's like the access point and my computer just don't like each other!
View 6 Replies
View Related
Jan 6, 2011
I've just got a new laptop and I have been unable to connect it to our wireless home netowrk.I've tried disabling my firewall, resetting our router, etc. but to no avail.this is the info i got when i did a command prompt (but i have no idea what it means=p)[CODE]
View 11 Replies
View Related
Dec 20, 2012
I've suddenly been unable to connect to my wireless network and this is the sequence of events leading to the problem. (Currently using a friend's computer). My chrome browser got hijacked by the search conduit virus. So, I cleaned it with AdW cleaner. My internet connection was ok then. After that, I ran ccleaner and cleared the registry. Now, I find that I have trouble even connecting to my wireless - it says limited connectivity or no connectivity. The other comp's in my house can connect to the internet fine. I've checked and resetted my network adapter. It is working, but still can't connect. I restored all my registry but still it doesn't solve the problem.
View 10 Replies
View Related
Dec 31, 2012
I'm trying to setup a router in my moms house. She has DSL and when the box is connected directly to her computer everything works fine. However, if I connect the router her computer reads "Limited or No Connectivity". I can connect to the router wired and wirelessly with my laptop, phone, and even her streaming media box without any problems. I ran IP config and i'm not geting a default gateway address.
View 3 Replies
View Related
May 16, 2011
I have three desktops and one lap. I have TWC RCA modem and cisco linksys router and two usb adapters for wireless connection. situation is this: the modem and router are at one end of the house and one of the pc's is located at the other end. that one gets low signal strength only one or two bars and the internet works slowly to a point it feels like i'm on dial up. I've had people tell me to upgrade the router from wrt45g to n which I did to an e1000, but I still have the same issue. also was told to move the modem and router to the center of the house. but twc says that would not correct the issue.
Something about dividing the mpbs and the farther the pc the lower the signal. so, guess my question would be 1. does that sound correct to you. would it be better to move the modem and router? would it be better to have the one in question wired in? I did try an extender by netgear, which gave more bars/signal strength but but then would not connect to the internet. but I did that before I got newer linksys router. not sure if maybe I should try the extender again, but then the geek squad, when they came an set up the new router, said that it would probably do the same thing.
View 9 Replies
View Related
Dec 27, 2011
My computer will not get computer connectivity through wireless. If I hook the ethernet cable in it does just fine. When I ping the router it sends and receives just fine. I get connection to the intranet/server just not the internet. I try to ping [URL]and it receives b/w 2 and 3 packets at terrible speeds. I have another computer hooked up to the same network that does just fine.
View 3 Replies
View Related
Jun 5, 2011
My pings, connected wirelessly.My pings, connected with an ethernet cable to the same router only a moment later, no difference in what programs are open and using the connection.This is a newer laptop model from Asus, specifically this one. Windows has been updated and the computer is otherwise well-maintained, I being a (usually) proficient pc user.This is on a friend's wireless network, not my own. I won't have access to my own until tomorrow but, anecdotally, I believe the symptoms are similar but a little worse here. Concerning his network, I have been sitting in the same room with two other people connected wirelessly as well to the same network for hours on end and they experience zero noticeable spikes.I've been trying to find a solution using google with no progress.
View 2 Replies
View Related
Mar 29, 2011
I am looking for a wireless router with USB connectivity.. is there any router in the market with this kind of capabilities.. (USB 3.0)
View 4 Replies
View Related
Dec 22, 2012
We just moved and had our internet service connected at the new house using the same service provider, wireless router and network we had at the old house. My PC can access the internet fine, but my wife's iPad cannot.
View 5 Replies
View Related
Dec 9, 2011
Had a virus that I cleaned on my laptop. After virus removal I can connect to my FIOS router both wired and wireless but cant get to the internet. Can ping laptop and laptop can ping desktop. I have no issue on my desktop machine getting to the internet only issue is with laptop. I have disabled/removed all apparent firewalls/antivirus. Using Windows XP SP3 and both Firefox and IE. Proxy is off in Firefox and IE. . Have reset network adapters. Network adapters are set to get DNS and IP automatically. IP Config shows IP address and the DHCP and DNS Server addresses are correct (FIOS Router). Windows Firewall is disabled. Something is stopping me from going outside the local network.
View 3 Replies
View Related
Dec 27, 2011
My wireless keeps saying limited or no connectivity
View 1 Replies
View Related
Mar 26, 2011
I am having a problem trying to connect my wireless usb lan adapter to the internet. i checked my networks and i noticed that it said that i had Limited Connectivity (sometimes when i fool around with it, it switches to Local Only). i also have a wireless router (EH-100) on a separate network. that router's network, on the other hand, has no problems and it says that the network is Local and Internet. i really want to use my wireless usb lan adapter to connect my DSi to the internet. my ds recognizes the signal but because the adapter is on a Limited Connectivity network, it cant connect to the internet. [code]
View 12 Replies
View Related
Mar 23, 2013
I have been experiencing quite a bit of wireless problems with my Inspiron 17R SE. Only about half the time can I connect to my router and even then it only stays connected for a couple hours. It seems intermittent and the problem will go away for a week or so, but right now it is back in full force. Typically it will either connect and say that there is limited connectivity or it won't connect at all. Resetting the adapter via the Windows 7 troubleshooter only fixes it about half the time.
The thing is that the wireless and everything else works just fine on my Ubuntu partition, which makes me think that my driver is a bit wonky. I have tried downloading the one directly from Dell, and that has come to no avail. I have even tried using the Dell software support suite, and that hasn't found anything wrong either.
View 9 Replies
View Related
Dec 28, 2011
I just connected a WRT190N v2 Wireless Router to my XPS 400. When my wife tried to connect our other desktop to the wireless network, everything seemed fine. I noticed that, when she wasn't actively browsing or using the network, her computer would lose connectivity, but regain it when a browser was opened. When I tried to use the XPS, I found that it had no connection. I regained connectivity after using the Windows Network Diagnostic tool, but neither computer seems to keep connectivity when left alone, at least for very long.
View 1 Replies
View Related
Dec 24, 2011
I have a WRT610N V1 wireless router. The wireless has always been a little quirky and stopped working for short periods of time. It now won't connect at all. My computer sees the signals for both 2.4 and 5 MHz networks but can't connect to them. It was working fine until yesterday but now I can't get it to work. I also have a couple of guests, neither of whom can connect to the wirelesss networks. The router works fine for wired connections (I also have the guest computers connected through a WD Powerline box) and the MAC filter is disabled. It's set for OpenDNS and so used two fixed DNS addresses. I tried resetting and powering down the router.
View 2 Replies
View Related
Nov 6, 2011
I use this computer at work and at home on wireless network. At work it has been fine but at home I sometimes get the "Limited or no conectivity" message. I have not tried any solutions yet as it usually goes away if I reboot and if that does not do it taking it to work (where it works FINE) and then back home ususlly fixes the problem. Last night I was able to go online and google something but when I clicked on a link it did nothing for several minutes and THEN told me I had 'Limited or no conectivity' where just a few minutes before I was 'connected' signal strength 'excellent'. When I click on 'repair connection' it tells me it can not renew IP address.As stated I have not tried anything, changed anything, and there is no one else using computers on the network
View 1 Replies
View Related
Sep 20, 2012
I'm working on a Gateway LT2016U and it will not connect to the Internet (wired or wireless) to its home modem. I can access the same modem with my Netbook (wired and wireless) so I know the modem is working. I can access the Internet with the Gateway anywhere else ( my home and my work) but it will not connect to the owners modem. I've ran the network trouble shooting software and it doesn't fix anything.
View 3 Replies
View Related
Mar 19, 2011
I have a bt wireless modem although it will not allow me to connect to the Internet over wireless although it will though ethernet.
View 1 Replies
View Related
Jan 23, 2011
just moved into a new house and cannot connect to the wireless network. My housemate have no problem connecting to the internet via the wireless network. Her notebook is running on Win XP; mine is Vista. I tried manually setting the IP address but it still didn't work.
View 7 Replies
View Related
Jan 26, 2012
I manage the I.T. department for an ambulance service. We have 12 ambulances all equipped with Verizon 4G LTE Samsung hotspot cards. [code] There are laptops in each of the ambulances that connect to the wireless cards in the ambulance via DHCP. I get frequent problems when the vehicle get close to each other of them jumping from one card to another... which is not a huge problem, except when it happens the computer will have a "limited connectivity" to the internet. This sometimes will resolve after 3-5 minutes on its own, or if i disconnect from the wireless card and reconnect it will resolve, or sometimes by rebooting the wireless card it will resolve.We also need the ability to move the laptops from one ambulance to another as well so we need to have this flexibility.would I be better off establishing the same IP address to each of the wireless cards, still keeping different SSID's and different channel #'s and then hard code the IP address into the laptop instead of using DHCP to connect? My goal is to eliminate the limited connectivity issue.
View 3 Replies
View Related
