Adsl Wireless Modem No Internet Connectivity
Mar 19, 2011I have a bt wireless modem although it will not allow me to connect to the Internet over wireless although it will though ethernet.
View 1 Replies
ADVERTISEMENT
BCM5354 Wireless Router Has No Internet Access When Connected To ADSL Modem
May 8, 2011I own a Broadcom BCM5354-based wireless router (Tomato 1.27 flashed) and an Aztech DSL605E modem. When both are powered up, the wireless router sometimes doesn't get internet access because the modem automatically logs itself in. I have to plug the modem cable to my laptop, manually disconnect the modem, and plug the modem cable back to the router to fix it.
View 2 Replies View RelatedHome Network :: Wireless DLink Modem 2730U / Share ADSL Internet As Limited?
Aug 4, 2012I have an ADSL connection using a wireless DLink modem 2730U I want to share my internet with my neighbour as limited speed and limited traffic.How can I do this? Is it possible as wireless?
View 4 Replies View RelatedWireless :: Convert The Same ADSL Wired Modem Into A Wireless Modem For Laptop
Mar 15, 2012I have Desktop and Laptop connected to a Huawei-make,Model No Smart AX 882, ,via ethernet & USB port. Is it possible to convert the same ADSL wired modem into a wireless modem for my Laptop. the type of hardware to be used (e.g., wireless access point or a wireless router) through my USB port in the wired modem? what is the configuration change I have do in my wired broad band modem?
View 1 Replies View RelatedConnect A Wireless Modem To Adsl For Wifi?
Jan 15, 2013I wanna Know That I hab a nokia siemens SL2_141 modem which is not in use...beacause I dont have anymore BSNL connection. Now I am using A Wireless Modem of MTS. Recently I have Buyed New Phone I wanna Use wifi...
HOw Can I connect Internet of my Wireless Modem to The Wifi of nokia siemens SL2_141 Modem.I have Attached A photo So that U ppl Understand properly.
IP Settings For ADSL Modem To Switch To Wireless Router?
Feb 5, 2012I've a Shiro DSL805E Modem and to connect to multiple computers, I connected an Encore 5 Port Switch. Now I got laptop and thought of getting a wireless network, so I bought TP-Link TL-MR3420 Wireless Router and connected it to the one of the wires from the Encore Switch. But I'm unable to access the internet through TP-Link Router but the internet works fine for the computers which are directly connected to switch. how to do ip settings for TP-Link Router. But when I connect router directly to modem by bypassing switch, it works fine but not via switch. I have some restrictions due to which I have to strictly following this sort of connection: Modem -Switch - Router
View 1 Replies View RelatedTP-Link 300Mbps Wireless :: Connect TL-WR841N To ZTE ZXDSL 831 Adsl Modem?
Apr 27, 2013Region : India
Model : TL-WR841N
Hardware Version : V8
Firmware Version :
ISP : Reliance
I got a new broad band connection , its with an ADSL modem (ZTE ZXDSL 831). Now i want to plug in my TL-WR841N to use my WiFi and to connect to my second machine!! no matter what setup i try, i'm unable to connect
Linksys Wireless Router :: Adding WRTG54 To Vigor ADSL Modem?
Sep 27, 2012We have a Vigor ADSL modem linked to a hub that then links to 3 pc's and 2 printers all via ethernet. Connection to the outside world is fine.
A few weeks ago the IT geek decided to switch the modem from DHCP to PPPoA and put each pc & printer on fixed IPs. The Vigor is also on a static IP.
This therefore cut off our link to the Linksys WRTG54 we have in a different room serving as a wireless router.
The Linksys is/was connected via ethernet to port 1, port 2 direct to laptop. Wireless worked fine until they changed to static IP etc on the Vigor, now we only have ethernet to the laptop and no Wireless.
What do we need to do at the Linksys end to get wireless working again?
Belkin Routers :: N150 Wireless Modem Router ADSL Slot?
Dec 17, 2012I bought "Belkin N150 Wireless Modem Router" and while installing noticed that the ADSL slot is too short that does not fit the LAN chord, instead fits the telephone chord. How do I fit the LAN chord fit in the ADSL slot? Any alternatives? My ISP comes with a LAN chord and is connected directly to my PC.
View 3 Replies View RelatedF5D7632-4 - Set Up Ethernet Port For DHCP With Belkin ADSl Modem With Wireless G Router?
Mar 14, 2011how do you set up an ethernet port for DHCP with a Belkin ADSl modem with wireless G router, model number F5D7632-4?
View 1 Replies View RelatedTP-Link ADSL2+ Wireless :: Lan Setting In ADSL Modem Router TD-W8968 Failed
Jan 2, 2013Region : Malaysia
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP : Streamyx
In the process of Lan setting my new wireless adsl modem router TD-W8968, an error message shown when I press save. Error Code: 1, Internal error.
DLink DSL 2640R Wireless Adsl Router / Modem - Create More Network Ports Upstairs
Jan 22, 2013At home I have a D Link DSL-2640R wireless adsl router/modem in my downstairs office.I would like to use the cable which goes to upstairs of the house to link to some sort of extra router or switch in order to provide more network ports upstairs.
View 1 Replies View RelatedTP-Link ADSL2+ Wireless :: Toshiba Laptop Can't Get Connected To ADSL Modem Router TD-W8960N
Oct 12, 2012Region : UnitedStates
Model : TD-W8960N
Hardware Version : V3
Firmware Version :
ISP :
My Toshiba laptop can't get connected to the wireless ADSL modem router TD-W8960N. I have 4 different laptops and one desktop, all connected to the router very well, only the Toshiba cannot get on Internet. I can connect to the wireless network on the laptop, but it shows limited access.
Wireless :: Netgear USB Adapter / Found Modem But No Connectivity
Aug 11, 2011I am using two desktops. One is an old Windows XP running SP3, and the other is a new Windows 7. Neither PC is wireless. I set up the modem through the Windows 7 computer, and it is connected to the wireless modem through the Ethernet cable. (I hope that I am saying all of this correctly.) It's running just fine.Because the other PC is not wireless, I purchased a NETGEAR wireless USB adapter, go through installation and setup, starts and finds my SSID, add WEP key, etc, etc. In the bottom corner of the software it says the signal is good. In the toolbar it says the adapter is connected to the modem.Next to it, though, the network connections icon shows:
Wireless Network Connection
Speed: 24Mbps
Signal Strength: Good
Status: Limited or no connectivity
And so, of course, I have no connection to the Internet. Using the modem through Ethernet on the XP computer (switching the situation around, in other words) is not an option; the only phone line for connecting the modem to the wall is too far away.(It was stated more than once that I should use WPA instead of WEP; I haven't made it that far yet... I'm just trying to get this other computer connected.)
Netgear Wireless ADSL Firewall Modem Router DG834 / Connection Loss - Routers Or ISPs Fault
Apr 14, 2012Lately I encountered random Internet connection issues?My router is a Netgear Wireless ADSL Firewall Modem Router DG834 (Firmware V1.05.0) and my ISP, isn't the most reliable regarding bandwidth... All clients (max 3 at the same time) connect wireless.The problem is that the last few weeks my connections is very unstable, all clients lose the internet connection until you restart the router manually.I can't even connect to the webinterface (192.168.0.1), during the downtimes.
View 4 Replies View RelatedConnect Dir 615 With Adsl Modem?
Jan 27, 2011recently i got a dlink dir 615 router from a friend. i'm using adsl modem now. i want to connect the modem to the router so that i have a wireless at home for my laptop and iphone. i have follow the step in the router manual but it did not work. i just cannot conect to the router page through the 192.168.0.1 i am using windows vista home basic.
View 15 Replies View RelatedSetting Up A Second Adsl Modem?
Jul 9, 2012I have a modem/router at one end of my house, but the WiFi doesn't reach the other end of the house (where I have my other PC). If I bought a second modem/router and plugged it in next to my computer, would that work?and if so, would I have to turn one modem off to use the other?
View 1 Replies View RelatedBest Modem For 24Mbps ADSL Line?
Jan 27, 2011I have D-link 2640U ADSL2+ modem. Now I have 12Mbps / 1Mbps internet connection. I am planning to move to 24Mbps /1Mbps intenet connection and I want to know if this modem is enough. What is the best modem so I get the full 24Mbps[CODE]
View 7 Replies View RelatedNetworking Via Adsl Modem / Router
Oct 9, 2012I want to transfer files between two computers.i have a Router+Adsl modem i want to network two pc one is running windows xp and other is running windows 7.i plug both pc's cable in Router and LAN card...after that my network places shows below picture i didn't configure anything. url...when i click other network pc it ask me user name and password. url...I never did networking. how can i transfer files between two pc's while internet don't stop.
View 2 Replies View RelatedCisco WAN :: 2600 - How To Use DMZ Like ADsl Modem
Mar 14, 2013I am new using cisco router 2600, i want to use dmz like adsl modem to direct ip public to ip lan like 180.15.22.x.x to ip lan 192.168.1.2 ( lrouter mikrotik ) outside to inside so when i call ip public then forrward to mikrotik
View 2 Replies View RelatedHow To Choose An ADSL Modem Router Combo
Nov 22, 2011I am looking to purchase an ADSL wireless modem router combo which will be mainly used for net browsing, online gaming (ps3) and skype.It has been suggested by the IT tech we use that I a get dual band n wireless gigabit modem/router but my limited knowledge and the confusion created by reading multiple contracting reviews of products is sending me a bit loopy.
View 2 Replies View RelatedConnecting Wifi Router To Adsl Modem
Nov 22, 2012I have a problem connecting wifi router(airlive wt-2000r) to my ADSL modem(webstar epc2203ed2.0) using utp patch cable. When my PC is connected straight to the ADSL modem everything works like charm. But when I connect modem with wan port on the router and router with my PC I get no internet access. The network shows as unidentified network and win7 troubleshooter says: Default gateway not available. Connecting them two devices seems pretty simple and I dont think I am doing anything wrong so what could be the problem?
View 1 Replies View RelatedADSL Sweex Modem Disconnects Every Ten Minute Or So
Feb 7, 2011I've got a ADSL Sweex Modem, connected to a D-Link Wireless Router,The modem is connected to our telephone line, we have other phones connected to other "telejack" too. The router is connected to a computer with wire, and another computer wireless.Every now and then we get random disconnect. Sometimes we can go several months without a single disconnect,whilst sometimes it happens as often as every 3 minute. This is the log:
[code]....
D-link Dir-615 :: Config Adsl Modem Via Wifi?
Jan 26, 2012I use D-Link DIR-615. I can't connect to config page 192.168.1.1. I need to access ADSL modem config page. Asus RT-N12 can configADSL modem via Wi-Fi.
View 1 Replies View RelatedCisco WAN :: 3845-2 - IPSEC From Behind ADSL Modem
Apr 9, 2013I'm trying to set up an IPSec tunnel between 2 3845 routers that each sit in a private LAN behind an ADSL modem. Each modem does have a static public IP address from the ISP.
Thus:
Cisco 3845-1 <-> ADSL modem <-> WAN <-> ADSL modem <-> Cisco 3845-2
3845-1
Gi 0/0 - private ip
l
NAT
[code]....
So I would like to set up IPSEC between the GI 0/0 interfaces on the 3845's.
Cisco WAN :: 1700 And ADSL Modem Connection
Oct 23, 2012I have an 1700 cisco Router and a ADSL connection to Internet.How may I use it on my home network?There's any configuration that I should to do?
View 3 Replies View RelatedCisco WAN :: 881 Router With External ADSL Modem
Apr 2, 2012configuring my new Cisco 881 Router with my existing ADSL modem.At the moment, i am connecting to the internet using tp-link modem router, all PPPoE/DHCP/Wireless is set up there...and that connect to the switch where all my computer connected to.
Now i want to connect this new Cisco Router to it to basically do the firewall/filtering/dhcp...leave the authentication thing on my Modem.Can i get a head start what to configure here on the cisco? since it does not work as easily as other Router where I can just plug a cable from modem LAN to Router LAN.
W8951ND - Use Basic ADSL And TP-Link Modem Together?
Mar 28, 2013I have a TP-LINK TD W8951ND wireless Modem+Router which contains one RJ11 (phone line) port and four RJ45 (Ethernet) ports along with wireless N support.
Now for some reason, my TP-LINK modem doesn't work with my ISP, whereas the modem provided by my ISP works. If I wish I could get the basic modem provided by my ISP which contains one RJ11 port and one Ethernet port.
So can I link both the modems? I mean will this configuration work: Connect telephone cable to basic modem provided by ISP. And then connect the Ethernet port of basic modem to the Ethernet port of TP-link modem. And then connect remaining Ethernet ports to PC and laptop and simultaneously use WIFI.
Will it work or should I have to replace my TP-Link Modem+Router?
Servers :: How To Connect A Adsl Modem To A Computer Network
Jun 19, 2011how to connect a adsl modem to a computer network using a switch with a server.I have a network with a server and about ten clients computers all connected through a switch, the server has an IP 192.168.1.1 as its gateway. I want to connect adsl modem to the switch so that all the computers can have access to the net, but the adsl too has 192.168.1.1 as its IP.
View 1 Replies View RelatedBroadband :: Adsl Modem / Router Mac Changing In Dos Prompt?
Jan 26, 2012Modem/router mac address changer .. i have globe wimax bm622i model, that needs to be change its mac address, hardly to find a right software, so i decide to manually config and do it by ms-dos commands, any related command for dos to change mac address of globe-wimax-bm622i-model.
View 1 Replies View RelatedTP-Link TD-W8901G - Can ADSL Modem Router Be Used As Standalone
Jun 4, 2011I'm expanding my home network and the adsl modem router supplied by my ISP has just 1 RJ-45 port and 1 usb port (and an RJ-11 for the Internet). I have zeroed in on TP-Link TD-W8901G having 4 RJ-45 ports, 1 USB port, 1 RJ-11 port and also it is a wireless router. Currently I would be connecting the above modem router to my desktop running Linux and using the same ISP with ADSL. Considering a future scenario where I may decide to use another way to connect to the Internet like maybe 3G or Cable, etc (with their separate modems) I was wondering if my same modem router (TD-W8901G) could be used as a standalone router for connecting the devices on my home network. Basically, what I want to know is whether this modem router would be able to share an Internet connection from some other source, other than the one provided through its own RJ-11 (ADSL) source?
View 1 Replies View RelatedLinksys Cable / DSL :: Working With WAG320N Only As Modem ADSL?
May 7, 2012i have Linksys WAG320N and Draytek Vigor 2850. My main router is Vigor, wchich support 2 WANs. First WAN is my VDSL connection (plug direct into Vigor) and second WAN i want ADSL connection. Can I work with WAG320N only as ADSL modem?
View 1 Replies View RelatedTP-Link 3G/3.75G Router :: Using TL-MR3220 As Repeater Behind ADSL Modem?
Jan 26, 2013Region : UnitedKingdom
Model : TL-MR3220
Hardware Version : Not Clear
Firmware Version :
ISP :
I am connected to the internet via a non TP=Llink ADSL2 modem/router supplied by my ISP.I was using my TL-MR3220 as a 3G modem but no longer need it for that purpose. I was wondering whether I can now use my TL-MR3220 for two other purposes: as an additional wireless access point and as a means of linking equipment (i.e. printers) to the home network . i have tried connecting the ADSL2 modem/router to the TL-MR3220 via an ethernet cable (one of the 4 LAN ports on the ADSL modem/router to the blue WAN port on the TL-MR3220) but I can get no internet connection through the TL-MR3220.Is this normal i.e. something that the TL-MR3220 is not designed to do, or am I just using the wrong settings ? I have tried a whole range of different settings but none seem to work.
