Cisco WAN :: 2600 - How To Use DMZ Like ADsl Modem

Mar 14, 2013

I am new using cisco router 2600, i want to use dmz like adsl modem to direct ip public to ip lan like 180.15.22.x.x to ip lan ( lrouter mikrotik )  outside to inside so when i call ip public then forrward to mikrotik

View 2 Replies


Cisco WAN :: 2600 - Load Balancing Between ADSL Lines

Jan 11, 2011

I've 6 ADSL lines that provided by the same ISP and i've Cisco router 2600, so, how can I connect the six lines to the cisco router and running load balancing between them ??

View 3 Replies View Related

Cisco WAN :: 2600 Router / IBM 3745 Modem - SNA To Ethernet Via 56k

Jun 5, 2011

trying to establish a connection on  an ibm 3745 controller via two IBM 5822 modems to a cisco 2600 router using sdlc encapsulation secondary bridging data from the serial port to the E/Net port to run the 3270 client ???

View 19 Replies View Related

Cisco Switching/Routing :: 2600 - Router With Cable Modem

Jan 24, 2012

I have a cable modem with my 2600 Router and i have a little speed problem when I'm going out to the web via my F0/0.. according to regular speed test sites my speed is around 20mbps but when i hook up to my modem directly i get a solid 40mbps.. now I've changed my Cat 6 cable from my modem to my router and this are my settings in the router.

[Code] ...........
I see some drops and lost carriers but not sure what those might mean?

View 2 Replies View Related

Cisco Switching/Routing :: 2600 - Configuration Via Cable Modem

May 2, 2012

I'm trying to configure a disco router 2600, my internet connection is via a cable modem. I get a dynamic IP from the cable modem but when I ping to any external IP I have errors.Copy show config and show interface f0/1
GUEST#show config
Using 1103 out of 29688 bytes
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
[ code]...

View 3 Replies View Related

Cisco WAN :: Will 2600 Series Router Support 10Mb 10 / 1000 Traffic From New Modem

Jun 26, 2012

We are upgrading our incoming Internet service from 30 Mb 10/100 to 100Mb 10/1,000.Will my 2600 series router support the 10Mb 10/1,000 traffic from my new modem?Do I need to change my interface speed from 100 to 1,000? I to be sure my router will support the upgrade. [code]

View 8 Replies View Related

Wireless :: Convert The Same ADSL Wired Modem Into A Wireless Modem For Laptop

Mar 15, 2012

I have Desktop and Laptop connected to a Huawei-make,Model No Smart AX 882, ,via ethernet & USB port. Is it possible to convert the same ADSL wired modem into a wireless modem for my Laptop. the type of hardware to be used (e.g., wireless access point or a wireless router) through my USB port in the wired modem? what is the configuration change I have do in my wired broad band modem?

View 1 Replies View Related

Connect Dir 615 With Adsl Modem?

Jan 27, 2011

recently i got a dlink dir 615 router from a friend. i'm using adsl modem now. i want to connect the modem to the router so that i have a wireless at home for my laptop and iphone. i have follow the step in the router manual but it did not work. i just cannot conect to the router page through the i am using windows vista home basic.

View 15 Replies View Related

Setting Up A Second Adsl Modem?

Jul 9, 2012

I have a modem/router at one end of my house, but the WiFi doesn't reach the other end of the house (where I have my other PC). If I bought a second modem/router and plugged it in next to my computer, would that work?and if so, would I have to turn one modem off to use the other?

View 1 Replies View Related

Cisco WAN :: 3845-2 - IPSEC From Behind ADSL Modem

Apr 9, 2013

I'm trying to set up an IPSec tunnel between 2 3845 routers that each sit in a private LAN behind an ADSL modem.  Each modem does have a static public IP address from the ISP.
Cisco 3845-1 <-> ADSL modem <-> WAN <-> ADSL modem <-> Cisco 3845-2
Gi 0/0 - private ip

So I would like to set up IPSEC between the GI 0/0 interfaces on the 3845's.

View 1 Replies View Related

Cisco WAN :: 1700 And ADSL Modem Connection

Oct 23, 2012

I have an 1700 cisco Router and a ADSL connection to Internet.How may I use it on my home network?There's any configuration that I should to do?

View 3 Replies View Related

Cisco WAN :: 881 Router With External ADSL Modem

Apr 2, 2012

configuring my new Cisco 881 Router with my existing ADSL modem.At the moment, i am connecting to the internet using tp-link modem router, all PPPoE/DHCP/Wireless is set up there...and that connect to the switch where all my computer connected to.
Now i want to connect this new Cisco Router to it to basically do the firewall/filtering/dhcp...leave the authentication thing on my Modem.Can i get a head start what to configure here on the cisco? since it does not work as easily as other Router where I can just plug a cable from modem LAN to Router LAN.

View 2 Replies View Related

Best Modem For 24Mbps ADSL Line?

Jan 27, 2011

I have D-link 2640U ADSL2+ modem. Now I have 12Mbps / 1Mbps internet connection. I am planning to move to 24Mbps /1Mbps intenet connection and I want to know if this modem is enough. What is the best modem so I get the full 24Mbps[CODE]

View 7 Replies View Related

Networking Via Adsl Modem / Router

Oct 9, 2012

I want to transfer files between two computers.i have a Router+Adsl modem i want to network two pc one is running windows xp and other is running windows 7.i plug both pc's cable in Router and LAN card...after that my network places shows below picture i didn't configure anything. url...when i click other network pc it ask me user name and password. url...I never did networking. how can i transfer files between two pc's while internet don't stop.

View 2 Replies View Related

Cisco AAA/Identity/Nac :: ADSL Modem 867-K9 Not Connecting With Default Mtu

Feb 24, 2013

The ADSL Modem CISCO867-K9 is not connecting to our NAS router with default mtu value in the NAS router virtual template
Is there is any reason for ths ?  With the below settings my ADSL 867 connecting , but if i remove the (mtu 1440 and ip tcp adjust-mss 1392 , this modem is not connecting
My Virtual Template config
interface Virtual-Template1
mtu 1440
ip unnumbered Loopback3


View 1 Replies View Related

Cisco WAN :: Connecting 1900 Router To Adsl Modem

Dec 9, 2012

i have  one airtel isp connection was connected to beetel adsl modem and this  modem is connected to d-link switch to accessing internet for my lan.  and one netgear wireless router is aslo connected to this d-link switch.  my need is i has one cisco 1900 router, i want to get internet access  from adsl modem or netgear router to my cisco router.

View 1 Replies View Related

Cisco WAN :: ADSL Modem 867-K9 Not Connecting With Default Mtu Config

Feb 24, 2013

Dear The ADSL Modem CISCO867-K9 is not connecting to our NAS router with default mtu value in the NAS router virtual template.With the below settings my ADSL 867 connecting , but if i remove the (mtu 1440 and ip tcp adjust-mss 1392 , this modem is not connecting. [code]

View 2 Replies View Related

Adsl Wireless Modem No Internet Connectivity

Mar 19, 2011

I have a bt wireless modem although it will not allow me to connect to the Internet over wireless although it will though ethernet.

View 1 Replies View Related

How To Choose An ADSL Modem Router Combo

Nov 22, 2011

I am looking to purchase an ADSL wireless modem router combo which will be mainly used for net browsing, online gaming (ps3) and skype.It has been suggested by the IT tech we use that I a get dual band n wireless gigabit modem/router but my limited knowledge and the confusion created by reading multiple contracting reviews of products is sending me a bit loopy.

View 2 Replies View Related

Connecting Wifi Router To Adsl Modem

Nov 22, 2012

I have a problem connecting wifi router(airlive wt-2000r) to my ADSL modem(webstar epc2203ed2.0) using utp patch cable. When my PC is connected straight to the ADSL modem everything works like charm. But when I connect modem with wan port on the router and router with my PC I get no internet access. The network shows as unidentified network and win7 troubleshooter says: Default gateway not available. Connecting them two devices seems pretty simple and I dont think I am doing anything wrong so what could be the problem?

View 1 Replies View Related

Connect A Wireless Modem To Adsl For Wifi?

Jan 15, 2013

I wanna Know That I hab a nokia siemens SL2_141 modem which is not in use...beacause I dont have anymore BSNL connection. Now I am using A Wireless Modem of MTS. Recently I have Buyed New Phone I wanna Use wifi...

HOw Can I connect Internet of my Wireless Modem to The Wifi of nokia siemens SL2_141 Modem.I have Attached A photo So that U ppl Understand properly.

View 3 Replies View Related

ADSL Sweex Modem Disconnects Every Ten Minute Or So

Feb 7, 2011

I've got a ADSL Sweex Modem, connected to a D-Link Wireless Router,The modem is connected to our telephone line, we have other phones connected to other "telejack" too. The router is connected to a computer with wire, and another computer wireless.Every now and then we get random disconnect. Sometimes we can go several months without a single disconnect,whilst sometimes it happens as often as every 3 minute. This is the log:


View 14 Replies View Related

D-link Dir-615 :: Config Adsl Modem Via Wifi?

Jan 26, 2012

I use D-Link DIR-615. I can't connect to config page I need to access ADSL modem config page. Asus RT-N12 can configADSL modem via Wi-Fi.

View 1 Replies View Related

W8951ND - Use Basic ADSL And TP-Link Modem Together?

Mar 28, 2013

I have a TP-LINK TD W8951ND wireless Modem+Router which contains one RJ11 (phone line) port and four RJ45 (Ethernet) ports along with wireless N support.

Now for some reason, my TP-LINK modem doesn't work with my ISP, whereas the modem provided by my ISP works. If I wish I could get the basic modem provided by my ISP which contains one RJ11 port and one Ethernet port.

So can I link both the modems? I mean will this configuration work: Connect telephone cable to basic modem provided by ISP. And then connect the Ethernet port of basic modem to the Ethernet port of TP-link modem. And then connect remaining Ethernet ports to PC and laptop and simultaneously use WIFI.

Will it work or should I have to replace my TP-Link Modem+Router?

View 1 Replies View Related

Cisco Routers :: RV120W Rebooting Itself When WAN (ADSL Modem) Breaks Away

Aug 16, 2011

I have a RV120W that reboots itself when the WAN (ADSL modem) breaks away. With an old D-Link low end router, reconnecting after a failure is completed after 5 seconds and nobody cares, but the RV rebooting takes almost 2 minutes which is actually noticed...I also have some trouble getting VPN running, QuickVPN as well as normal IPsec, using either Shrewsoft or Greenbow as clients. get this router running with 3rd party VPN clients?

View 1 Replies View Related

Cisco Firewall :: How To Configure 515E (version 6.3(4)) To Be Used With ADSL Modem

Dec 5, 2010

How can I configure the Cisco 515E (version 6.3(4)) to be used with ADSL modem. Currently the compuerters are directly connected to the ADSL modem to get the priviate IP addresses and we would like to add the Cisco firewall after the ADSL modem.

ADSL Modem ---> Firewall --> Switch--> Computers

View 2 Replies View Related

Servers :: How To Connect A Adsl Modem To A Computer Network

Jun 19, 2011

how to connect a adsl modem to a computer network using a switch with a server.I have a network with a server and about ten clients computers all connected through a switch, the server has an IP as its gateway. I want to connect adsl modem to the switch so that all the computers can have access to the net, but the adsl too has as its IP.

View 1 Replies View Related

Broadband :: Adsl Modem / Router Mac Changing In Dos Prompt?

Jan 26, 2012

Modem/router mac address changer .. i have globe wimax bm622i model, that needs to be change its mac address, hardly to find a right software, so i decide to manually config and do it by ms-dos commands, any related command for dos to change mac address of globe-wimax-bm622i-model.

View 1 Replies View Related

TP-Link TD-W8901G - Can ADSL Modem Router Be Used As Standalone

Jun 4, 2011

I'm expanding my home network and the adsl modem router supplied by my ISP has just 1 RJ-45 port and 1 usb port (and an RJ-11 for the Internet). I have zeroed in on TP-Link TD-W8901G having 4 RJ-45 ports, 1 USB port, 1 RJ-11 port and also it is a wireless router. Currently I would be connecting the above modem router to my desktop running Linux and using the same ISP with ADSL. Considering a future scenario where I may decide to use another way to connect to the Internet like maybe 3G or Cable, etc (with their separate modems) I was wondering if my same modem router (TD-W8901G) could be used as a standalone router for connecting the devices on my home network. Basically, what I want to know is whether this modem router would be able to share an Internet connection from some other source, other than the one provided through its own RJ-11 (ADSL) source?

View 1 Replies View Related

IP Settings For ADSL Modem To Switch To Wireless Router?

Feb 5, 2012

I've a Shiro DSL805E Modem and to connect to multiple computers, I connected an Encore 5 Port Switch. Now I got laptop and thought of getting a wireless network, so I bought TP-Link TL-MR3420 Wireless Router and connected it to the one of the wires from the Encore Switch. But I'm unable to access the internet through TP-Link Router but the internet works fine for the computers which are directly connected to switch. how to do ip settings for TP-Link Router. But when I connect router directly to modem by bypassing switch, it works fine but not via switch. I have some restrictions due to which I have to strictly following this sort of connection: Modem -Switch - Router

View 1 Replies View Related

Linksys Cable / DSL :: Working With WAG320N Only As Modem ADSL?

May 7, 2012

i have Linksys WAG320N and Draytek Vigor 2850. My main router is Vigor, wchich support 2 WANs. First WAN is my VDSL connection (plug direct into Vigor) and second WAN i want ADSL connection. Can I work with WAG320N only as ADSL modem?

View 1 Replies View Related

TP-Link 3G/3.75G Router :: Using TL-MR3220 As Repeater Behind ADSL Modem?

Jan 26, 2013

Region : UnitedKingdom
Model : TL-MR3220
Hardware Version : Not Clear
Firmware Version :

I am connected to the internet via a non TP=Llink ADSL2 modem/router supplied by my ISP.I was using my TL-MR3220 as a 3G modem but no longer need it for that purpose. I was wondering whether I can now use my TL-MR3220 for two other purposes: as an additional wireless access point and as a means of linking equipment (i.e. printers) to the home network . i have tried connecting the ADSL2 modem/router to the TL-MR3220 via an ethernet cable (one of the 4 LAN ports on the ADSL modem/router to the blue WAN port on the TL-MR3220) but I can get no internet connection through the TL-MR3220.Is this normal i.e. something that the TL-MR3220 is not designed to do, or am I just using the wrong settings ? I have tried a whole range of different settings but none seem to work.

View 5 Replies View Related

Cisco :: How To Connect A Catalyst 2960 Switch To A Zyxel ADSL Modem

Jul 19, 2012

I need to connect these devices:

- Some computers.

- A Cisco Catalyst 2960 switch (computers must be connected to this switch)

- A ADSL router Zyxel P-660HN-T1A with WiFi (the switch must be connected to this router)

In my company we have at least 10 computers which were connected to Internet using a WiFi connection. But now we need these computers connected to a wired line and this router has just 4 Ethernet ports which are not enough obviously. So we bought this 24-port Cisco switch to connect all the computers and I don't know how to connect it to the ADSL router and what configurations to set up in order to have access to internet in every computer connected to the switch.

View 2 Replies View Related

Copyrights 2005-15, All rights reserved