Netgear Wireless ADSL Firewall Modem Router DG834 / Connection Loss - Routers Or ISPs Fault
Apr 14, 2012
Lately I encountered random Internet connection issues?My router is a Netgear Wireless ADSL Firewall Modem Router DG834 (Firmware V1.05.0) and my ISP, isn't the most reliable regarding bandwidth... All clients (max 3 at the same time) connect wireless.The problem is that the last few weeks my connections is very unstable, all clients lose the internet connection until you restart the router manually.I can't even connect to the webinterface (192.168.0.1), during the downtimes.
I am a beginner to ASA. I am trying to connect the ASA 5505 behind the netgear ADSL router which is getting dynamic IP address from the ISP. How to configure the ASA5505 outside interface for SSL VPN connectivity?
I bought "Belkin N150 Wireless Modem Router" and while installing noticed that the ADSL slot is too short that does not fit the LAN chord, instead fits the telephone chord. How do I fit the LAN chord fit in the ADSL slot? Any alternatives? My ISP comes with a LAN chord and is connected directly to my PC.
I have a Netgear DG834G v3 ADSL router which I have had since early-2007.
When I work from home I connect to office networks on a Win7 machine via a Rackspace-provided VPN using Cisco System VPN Client 5. It works well, except for one issue that is costing me time every working day.
I get intermittently disconnected from the VPN, without any warning or apparent reason.
Since I bought the router 5-6 years ago I have had no need to update firmware, so other than ISP configuration I have had no need to change the router at all and I can say it's worked well for me.
What would be the reason for my VPN connection dropping? Is this an ISP issue (my ISP is Carphone Warehouse/TalkTalk) that I have to take up with them or is it more likely a hardware problem with my router or a VPN configuration issue?
My instincts are to not look into VPN config at the moment as I know a colleague who uses the same VPN through a different router and ISP can stay connected for hours, even overnight.
I've been having a problem for a while now wherein my internet connection seems to randomly drop for anywhere from ten seconds to a minute, then come back online. It's been doing this over the lifespan of one router, and continued into the life of this new one I have, which is a WNDR3700v3 Netgear.
I called my ISP and they fiddled around with things on my computer, but the issue is still going on. Rather than slog through another three hours with them, does anyone here have any tips for what I might look into for the cause?
We have a remote site connected to ADSL line with a Cisco 887VA router attached. This has been working fine for the last couple of months. However, recently, the site have started to complain of performance issues (network slow, applications disconnecting, etc)Looking on the router, we can see evidence of packet loss/timeouts from a simple ping to the internet e.g. [code]
However, we have logged the fault with our service provider and they return all line tests as clear but what is particularly strange is that they also report “and the SNR Margins are well within threshold levels (Upstream 11.5 and Downstream 15.0)” which, unless I’m misunderstanding something, seems to be completely different from what the router itself is reporting.Is there a reason why the service provider’s stats for Noise Margin would appear to be so different from what the router is reporting?
how to connect 2 routers that both have an ADSL connection. When attempting this the Belkin router will lose the ADSL connection after a random amount of time.
I have a Dell XPS 430 desktop and a Netgear DGN2000 modem/router. My ISP is Zen. The router is connected to the PC by an ethernet cable.I have had no problems accessing the internet for years until a couple of days ago when the monitors on the info bar show a triangle with a yellow exclamation mark. The Windows Diagnose and Repair reports - Error 815. The Broadband Network Connection could not be established because the remote server is not responding.My laptop with a wireless connection to the router as no problem connecting so I assume the router is OK.
I am trying to connect a wireless router (EDIMAX br-6228nc) with a ADSL router (NETGEAR). i assigned the LAN IP of the ADSL modem to 192.168.1.1, subnet mask 255.255.255.0, and enable DHCP server.then i connected a LAN port from ADSL router to the WAN port of the wireless router. i assigned IP of the WAN port of wireless router to 192.168.1.10, subnet mask to 255.255.255.0 and default gateway to 192.168.1.1 now on the LAN side of the wireless router i assigned IP 192.168.0.1 and subnet mask 255.255.255.0 enabling DHCP server.on the client pc i selected the setting of automatically assign IP setting (which it got 192.168.0.100, default gateway 192.168.0.1) but my client pc is not able to access the internet.
I have a 1Gb network set up whereby I have a Netgear 26 Port 1000Mbps unmanaged network switch at the heart of my home network. What I have the problem with is devices connected on any one of my 3 300Mbps access points drop out showing no internet but they really mean no network access unless i disconnect and reconnect or switch to another access point. Other things I get happening is one min i have a transfer speed wired connection to wired connection of 35Mb per second and then I only have 8 or less. I am wondering if I have cable issues but before I went out and spent about �100 on new belkin cat6 cable I would ask if there is software I can use to test all the devices on the network so I can replace the faulty item.
I am wanting to force the n600 to g.dmt for a more stable connection. cannot work out how to do it. am force into using old modem as far from the dslam and forcing adsl 1 improves performance.
I have a RV120W that reboots itself when the WAN (ADSL modem) breaks away. With an old D-Link low end router, reconnecting after a failure is completed after 5 seconds and nobody cares, but the RV rebooting takes almost 2 minutes which is actually noticed...I also have some trouble getting VPN running, QuickVPN as well as normal IPsec, using either Shrewsoft or Greenbow as clients. get this router running with 3rd party VPN clients?
Have one switch and network.PC number one have win98 and network adapter and connected to the switch.PC number two have winXP and network adapter and connected to the switch same as win98.Network works on win98 and winxp they see each other.internet working on winxp but dont work on win98
I have a Cisco wag120n adsl modem. I am setup with a SIP provider, so all my incoming and outgoing calls use SIP.So my question is, how does my ADSL modem handle incoming SIP calls,e.g the SIP call comes in and reaches my adsl modem. Then, how does the modem find the actual port that has my ATA adaptor (analog phone) or CME router attached ? I know port forwarding would handle this, but I am not actually using any configured port forwarding rules.
I've a Shiro DSL805E Modem and to connect to multiple computers, I connected an Encore 5 Port Switch. Now I got laptop and thought of getting a wireless network, so I bought TP-Link TL-MR3420 Wireless Router and connected it to the one of the wires from the Encore Switch. But I'm unable to access the internet through TP-Link Router but the internet works fine for the computers which are directly connected to switch. how to do ip settings for TP-Link Router. But when I connect router directly to modem by bypassing switch, it works fine but not via switch. I have some restrictions due to which I have to strictly following this sort of connection: Modem -Switch - Router
I bought my dad a Netgear N150 DGN1000 Wireless ADSL Router to replace his D-link router which kept dropping the wireless signal. I have established a wired connection and my ipad, iphone and his old laptop connect wirelessy to it without any problems but I just cannot work out why his laptop won't connect to the internet.It recognises the wireless signal and it says its connected and that the signal is excellent but when I try to go on the web or check emails it just won't work.I've tried deleting all his wireless networks and starting from scratch but don't know what else to tryHis PC is running windows Vista
How can I configure the Cisco 515E (version 6.3(4)) to be used with ADSL modem. Currently the compuerters are directly connected to the ADSL modem to get the priviate IP addresses and we would like to add the Cisco firewall after the ADSL modem.
We have a Vigor ADSL modem linked to a hub that then links to 3 pc's and 2 printers all via ethernet. Connection to the outside world is fine.
A few weeks ago the IT geek decided to switch the modem from DHCP to PPPoA and put each pc & printer on fixed IPs. The Vigor is also on a static IP.
This therefore cut off our link to the Linksys WRTG54 we have in a different room serving as a wireless router.
The Linksys is/was connected via ethernet to port 1, port 2 direct to laptop. Wireless worked fine until they changed to static IP etc on the Vigor, now we only have ethernet to the laptop and no Wireless.
What do we need to do at the Linksys end to get wireless working again?
I own a Broadcom BCM5354-based wireless router (Tomato 1.27 flashed) and an Aztech DSL605E modem. When both are powered up, the wireless router sometimes doesn't get internet access because the modem automatically logs itself in. I have to plug the modem cable to my laptop, manually disconnect the modem, and plug the modem cable back to the router to fix it.
I am running my laptop on Windows 7 Proffesional 32 bit and it won't let me search for a wireless connection on the Control Panel I think it might be a problem with the wireless switch at the bottom as it doesn't show the wireless sign on the laptop. I have also tried running the laptop on Ultimate 64 bit but the problem continued to persist.
The Router that I have is 2811 where it contains two Fa ports only, so I put an access switch between the two ISPs and the Fa0/0 then configured the Interface Fa0/0 with two IPs ISP1 and ISP2 as a secondary.
The problem that I faced that when ISP1 become down the another secondary IP (ISP2) stay down and the internal users have no access to the internet.
At home I have a D Link DSL-2640R wireless adsl router/modem in my downstairs office.I would like to use the cable which goes to upstairs of the house to link to some sort of extra router or switch in order to provide more network ports upstairs.
Region : UnitedStates Model : TD-W8960N Hardware Version : V3 Firmware Version : ISP :
My Toshiba laptop can't get connected to the wireless ADSL modem router TD-W8960N. I have 4 different laptops and one desktop, all connected to the router very well, only the Toshiba cannot get on Internet. I can connect to the wireless network on the laptop, but it shows limited access.
i tried to change my nat type to open, on my Netgear WNR2000v1.i connected throught typing my routers ip. (192.168.1.1)i watched a utube video, where someone told me that i had to changed something in the basic section to 2, instead of auto.now i cant connect to my router. ive tried with multiple pc's.
Recent incountered an issue with our elastix pbx and packet loss. Noticed this morning that when I turn on the firewall on our RV082, packet loss begins around the level 3 servers I see in my traceroute, and then slow spread out to all hops. When I turn the firewall back off, all hops have no packet loss or less than 1%. The weird part is, previously, I had the firewall enabled, and never had this issue.
So here's the setup, my apartment is right next to my parents' house (don't ask why) and they have a netgear WNR2000 router in their upstairs loft connected to a modem going to a local internet provider. My apartment is just far away enough so that I can barely get a signal, so I'm trying to set up a second wireless router (netgear WNR1000v2) in my apartment that will connect to the internet through the first router so I can get a better signal. I do have a way of running an Ethernet cable from the first router to the second in my apartment.
I have Desktop and Laptop connected to a Huawei-make,Model No Smart AX 882, ,via ethernet & USB port. Is it possible to convert the same ADSL wired modem into a wireless modem for my Laptop. the type of hardware to be used (e.g., wireless access point or a wireless router) through my USB port in the wired modem? what is the configuration change I have do in my wired broad band modem?
I just recently purchased a Cisco ASA 5505 ASA ver 8.2. I run a teamspeak server/ssh/dns and domain on the same server on the network. Before I switched to the asa, I have a regular DGL-4100 that ran with no issues. I have noticed that the connections are very unstable and disconnect frequently and when they do they take 1 to 5 minutes to be able to reconnect. I have done some cisco IOS but am fairly new to this. [code]
Having several issues w my E1200. For quite some time I have had intermittent loss of internet connection. This was somewhat true even before I got a wifi router. & it has continued. Recently it has been even worse & I'm not sure if it is my isp, my cable modem or the router. ISP came out & checked & said signals looked ok, although modem is old.Now i find out that the version of Cisco Connect that i had been using is incompatible w Mountain Lion so it won't work now. & newly downloaded dmg files say they are damaged (or that app has been modified or damaged--I'm not in a position to tell which but same results after I downloaded a 2nd time).
I have been having more frequent loss of internet connection at home. & when I click on the wifi icon to check, it shows it looking for networks. Also it has not been uncommon to see that it has switched to my guest network.Why would it switch to my guest network? What is the difference between the 2 besides the fact that I guess the guest network doesn't have access to everything on my regular network (which right now is only my iPhone, but may get wireless printer).Also when it shows the lists of networks that it "sees" my guest network does not show a padlock icon so what does that mean? It does have the default password.
Also because I had no idea that Cisco Connect was not compatible w Mountain Lion I didn't even think to check for upgrades before I upgraded to Mountain Lion & now I can't open Cisco Connect. Shows unsupoprted OS. & I'm also stalled trying to update the firmware for the router.I'm really beginning to see why it was cheaper than an Apple Airport Express. Even at a very low hourly rate, the lost time spent when this has not been working right has not been worth what I saved on the purchase price.
