Can't Connect Toshiba Laptop Wirelessy To Netgear N150 DGN1000 Wireless ADSL Router?

Jan 13, 2012

I bought my dad a Netgear N150 DGN1000 Wireless ADSL Router to replace his D-link router which kept dropping the wireless signal. I have established a wired connection and my ipad, iphone and his old laptop connect wirelessy to it without any problems but I just cannot work out why his laptop won't connect to the internet.It recognises the wireless signal and it says its connected and that the signal is excellent but when I try to go on the web or check emails it just won't work.I've tried deleting all his wireless networks and starting from scratch but don't know what else to tryHis PC is running windows Vista

View 9 Replies


NETGEAR N150 DGN1000 / Can Connect To The Router Via Wireless But No Internet

Sep 16, 2011

I am trying to set my NETGEAR N150 DGN1000 .I can connect to the router via wireless but no Internet.Theh INTERNET PORT indicator on the router is goes to OFF mode.Before I try this I had Internet with the same line with a different router..

View 3 Replies View Related

Laptop Won't Identify Netgear N150 DGN1000 Router IP Address

Dec 19, 2011

basically we got sent this new router from Orange (our ISP) and we have had problems with it for the last week. The router model is the Netgear N150 DGN1000. Sometimes I connect it will be absolutely fine, but then the next time I log onto my laptop it can't identify the network, it says connected but doesn't have the globe in the bottom right hand corner of my screen. Then we have to reset the router a few times everytime until it recognises it, even though the settings are saved when we connected last time. It is the same with my sisters laptop. We both have Atheros network adapters so that may be a compatability issue with the router, but my brother connects fine on his everytime. A similar problem occurs with modern warfare 3 on my ps3, it won't let me sign in to playstation network half the time and keeps saying NAT type failed, even though NAT is enabled on my router. get this problem sorted and to get a consistent network connection that connects every time that would be great. We changed the security type to WEP on it a few days ago from WPA and that meant we could sign into modern warfare 3 some of the time rather than never, but we are still having issues.

View 8 Replies View Related

Netgear N150 Wireless ADSL2+ Modem Router(DGN1000) - Get Internet On More Than One Computer At A Time?

Apr 13, 2012

I have a Netgear N150 Wireless ADSL2+ Modem Router(DGN1000) which i need to connect for wireless access..My internet connection is a wireless one(antenna connected on roof) connection available to only one computer with an RJ45 LAN.Is it possible for me to connect the router to this LAN cable and get internet on more than one computer at a time?? I have the following information

IP :
Subnet :
Default Gateway :
Primary DNS :
Secondary DNS :
MAC of the Registered Computer :

View 2 Replies View Related

Set Up The Internet Port On The NETGEAR N150 DGN1000 Router?

Oct 10, 2011

I am trying to set my NETGEAR N150 DGN1000 . I can connect to the router via wireless but no Internet.

Theh INTERNET PORT indicator on the router is goes to OFF mode.

Before I try this I had Internet with the same line with a different router.. I am not too sure what's wrong with this.. Could any one come up with a possible solution..

View 5 Replies View Related

Toshiba Satellite Will Not Connect To Netgear N150

Jun 3, 2011

My brother just updated the firmware on my Netgear N150 router. My computer shows my wireless network and shows full strength, but says unknown error when I try to connect. It does not appear to save the network password (WEP). My bro reverted the firmware, but still no go... Ethernet works fine, but unsure if it is limited to onmy my wifi. The Error Mesage reads: Wireless association failed due to an unknown reason

View 10 Replies View Related

Netgear N150 DGN1000 Not Finding Internet Connection?

Mar 22, 2012

I have just picked up an ADSL Netgear N150 DGN1000 router as my old router (just some branded old thing from my ISP has started playing up a bit due to age more than anything else) but for some reason it is not seeing my internet connection at all.I've reset it factory default twice and connect to it wirelessly just fine, including accessing the router's setup pages and whatnot. I was going to update the firmware from in there.. but that needs the connection to the internet as well.
My ISP is BE Unlimited (UK ISP) and their old branded modem connects again immediately when I plug that back in so I know it's nothing to do with any of the cables or filters, etc.One thing I have noticed is that on the box for the new router it does say Orange Retail (another UK ISP) on one of the barcodes but the router itself isn't branded, so I don't see this could be a problem but figured it was woth mentioning.

View 1 Replies View Related

Toshiba Laptop Can See Netgear Wireless Router But Not Connect To Internet

Feb 27, 2012

i have Toshiba laptop ,i just buy wireless netgear router for wireless net range but it does not work .its saw me the router acess point but some how my internet not connecting . its connecting with linsys but not with my router. its something which i can do ? am thinking of security system on the netgear properties.

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: Toshiba Laptop Can't Get Connected To ADSL Modem Router TD-W8960N

Oct 12, 2012

Region : UnitedStates
Model : TD-W8960N
Hardware Version : V3
Firmware Version :

My Toshiba laptop can't get connected to the wireless ADSL modem router TD-W8960N. I have 4 different laptops and one desktop, all connected to the router very well, only the Toshiba cannot get on Internet. I can connect to the wireless network on the laptop, but it shows limited access.

View 6 Replies View Related

Netgear Router (DGN1000) Unable To Connect Wirelessly To Secured Or Unsecured Home Network

Feb 15, 2012

I'll try and keep this brief, we were having problems with our netgear router (DGN1000) mainly with connection when online gaming with PS3, generally poor connection - so purchased a TP-Link router (TD-W8960N). We could usually access the netgear wirelessly on our laptops Dell and Acer Aspire 4820T (both Windows 7) without any problems and were still doing so last night. However hubby attempted to install the new router last night and all seemed to go fine but after installing we couldn't connect to the wireless network through laptops, iphone ps3 etc - even though we could see the network with excellent strength, after hours of trying called TP-Link they went through everything they could think of and still no joy. Gave up in the end and went to reinstall the netgear Router and now we have the same problem with this router, even though earlier in the night it wasn't a problem - we deleted the previous networks so there was nothing stored in memory & tried everything we can think of (although neither of us are brilliant with IT we do usually get by).We even set up an unsecured wireless network (on both routers) and still couldn't connect?

View 2 Replies View Related

Netgear N150 - Laptop Not Connecting To Wireless On Wake Up?

Nov 12, 2011

My wife has a COBY 10" netbook running Windows X home SP3., we use a NETGEAR N150 Wireless Router and for some time now, whether she boots from a cold startup or "wakes" this laptop, it has lost the network connection. It gets the "Wireless networks detected" message, sees our Security-enabled wireless network, but instead of automatically connecting, it always asks for the network key. I have a second laptop (Toshiba Qosmio) that I only use some othe time, primarily for vacations, and when I turn this on it always connects right to the network, even if we've been away and connected to a hotel network. I never have to use the key for our home network once I get back home.

She's getting pretty fed up having to constantly put in the network key on the COBY, this should be a "set it once" and it should remember it should it not? I'm sure it used to, have I missed something?

View 4 Replies View Related

Netgear Wireless G Router WGR614v9 Connect With Toshiba Satellite 335CDT?

Mar 6, 2011

I have existing wireless system router "Netgear wireless G router WGR614v9" and connected to DELL PC and laptops (two) and both are having window XP system.I have old computer ( Toshiba Satellite 335CDT with window 98 and I want to connect this to my existing wireless system.

1. Can I do this wireless connections.

2. If yes than how to do it, step by step.

View 1 Replies View Related

How To Use NetGear DGN1000 Router As Modem Only

May 27, 2011

I am using NetGear DGN1000 router which includes ADSL modem. I bought another router (Linksys E3000) with I connected to the old one. I would like to setup port forwarding on the new one and use the old one as a modem only. How can I do that?

View 3 Replies View Related

N150 - Centrino Intel Pro Wireless Lan 2100 3a Won't Connect To Netgear

Apr 28, 2011

Dell 8600 centrino intel pro wireless lan 2100 won't connect to netgear n150 wnr1000. Running 802.11b band it sees wireless network but won't connect. I have 2 other computers connected to network so it works.... I don't know if Netgear n150 is compatible with 802.11b band...

View 1 Replies View Related

Wireless :: Toshiba Laptop Wont Connect To Router?

Jun 25, 2011

Okay I know absolutely nothing about computers and my laptop won't connect to my wireless router. I keep scanning it and it says that there aren't any connections available, but my router is working and both my other laptop and my desktop are connected.

View 3 Replies View Related

Belkin Routers :: N150 Wireless Modem Router ADSL Slot?

Dec 17, 2012

I bought "Belkin N150 Wireless Modem Router" and while installing noticed that the ADSL slot is too short that does not fit the LAN chord, instead fits the telephone chord. How do I fit the LAN chord fit in the ADSL slot? Any alternatives? My ISP comes with a LAN chord and is connected directly to my PC.

View 3 Replies View Related

Belkin Router N150 - Laptop Cannot Connect To Internet

Apr 30, 2012

I recently bought a router so I could connect my Toshiba laptop to the internet. After I connected the ethernet cable to the router and plugged everything in, I installed the program from the CD that it came with. After the whole process, it says "You are now connected to the internet!". Yeah well when I try to get on the internet, it suddenly takes the connection off. On my wifi status, it says it's not connected anymore. When I try to connect again, it says I'm connected, although if I get on internet explorer, it takes off the connection again. Though when it is connected, it says no internet connection available although I am connected to the router. So basically, I'm connected to the router, but not the router to the internet.

View 4 Replies View Related

Linksys Wireless Router :: Toshiba Laptop With Atheros AR5008X Won't Connect

Jan 22, 2011

I have three N-compliant devices and several G-compliant devices on my network. I also have two routers, one being used an an access point. The first is a Linksys WRT350N; the second is a Linksys WRT54G. I have the G router connected as an access point so that I can reserve the N router for the N devices and achieve N speeds.N devices:Toshiba laptop; network adapter is Intel 4965AGN.Toshiba laptop; network adapter is Atheros AR5008XLexmark Wireless printerRouter settings:WRT350N: Security Mode WPA2 Personal; Encryption AES; Network Mode N-only; Radio Band 40MHz.WRT54G: Security Mode WPA Personal; Encryption AES; Network Mode MixedThe best I can recall, I set the WRT54G to WPA Personal instead of WPA2 Personal because one of the G-compliant devices did not list the WPA2 Personal setting -- but this is based on memory only.To reserve the WRT350N for the N devices and achieve N speeds, I set the Wireless Mode to N-only and Radio Band to 40MHz., and each router broadcasts its own unique SSID. Once I set everything up, I saw a substantial increase in the link speed reported by the Toshiba Connectivity Doctor (I realize there are issues about taking these numbers at face value, but let me continue). The Toshiba Connectivity Doctor reported WRT350N link speed at 130 Mbps and everything appeared to be working well.PROBLEMUntil recently, no problems were apparent; the Toshiba Connectivity Doctor indicated the two laptops connected to the WRT350N at 130 Mbps, the printer connected to and printed via the WRT350N, and all G devices connected through the WRT54G. Recently, however, network performance declined and the Toshiba Connectivity Doctor indicated erratic link speeds ranging from 1 Mbps to 130 Mbps.I found through a little research that my quest to reserve the WRT350N router for N devices lacked one element: according to Linksys info for the router, setting the N Transmission Rate to anything other than Auto results in denying access to B/G clients.I set the N Transmission Rate to 270 Mbps (the highest setting). The Linksys printer works fine and the Toshiba Connectivity Doctor indicates a solid 130 Mbps link speed for the Toshiba laptop with the Intel 4965AGN adapter card.The other Toshiba (with the Atheros AR5008X adapter card), however, is now only able to connect to the WRT54G (the Toshiba Connectivity Doctor indicates a solid link speed of 54 Mbps to the G SSID). If I reset the WRT350N N Transmission Rate to Auto, the Toshiba with the Atheros card can once again connect to the N Router -- but the erratic link speeds and the network degradation returns also.I have verified that the Atheros AR5008X network adapter is N-compliant. There aren't many settings on the Atheros AR5008X adapter card configuration, but I can find no documentation on the Internet for this card.As far as I can determine, all firmware is up to date for both routers and all drivers are up to date for both adapter cards.I'd love to know what changed in the first place, but I'm more concerned with fixing this problem. How I can get the Atheros adapter card to connect to the WRT350N with the N Transmission Rate set to something other than Auto?

View 6 Replies View Related

Configure Netgear Router Dgn1000 To Route Time Warner Road Runner Ethernet?

Mar 1, 2012

In order to feed my netgear dgn1000 adsl modem/router with a rca roadrunner modem with ethernet single jack do I enable NAT or not on Netgear router and do I use router as DHCP or not?

View 2 Replies View Related

Use Wireless Router Netgear WNR1000 N150 As Repeater?

Jul 12, 2011

I have a wireless router Netgear WNR1000 N150. I am wondering if I can use it as an access point/ repeater, and if I can, how to set it up. The modem provided by the ISP is in the room with the desktops; can I place the wireless router in a room

View 2 Replies View Related

N150 - How To Change Security On Netgear Wireless Router

Mar 4, 2013

How to change security on Netgear N150 wireless router ( set it to no security)?

View 1 Replies View Related

Belkin Routers :: Cannot Get N150 Wireless To Connect To Laptop Or IPad

Jun 3, 2013

I cannot get my belkin n150 wireless router to connect to my laptop or ipad - wireless connection was working but stopped - so i attempted to re-configure the ip protocols on the router using the password - changed the ip setting on the belkin page but did not reset or set address (DHCP).

View 1 Replies View Related

Dell :: 1525 Laptop Will Not Connect Wireless To Belkin N150

Jan 21, 2013

I have a Dell Inspiron 1525 laptop. It will not connect wireless to my Belkin N150. It use to, then one day it quit. I have an HP laptop and it connects wireless  just fine. So I don't think it is the router. I have tried to reinstall the router. And the PC tells me there is a network available,  but it will not connect. My question is... Can the wifi card be bad? Is there a key combination that might have been put in by accident?

View 1 Replies View Related

Home Network :: Connect A Netgear FS605 Directly To ADSL Router

May 12, 2012

I want to connect a Netgear FS605 directly to my ADSL router.However I find that this does not work unless I put my Netgear EN2005 Hub in between the Switch and the Router.The Hub is 10Mb/sec the switch 100Mb/s so I would like to eliminate the hub.

View 3 Replies View Related

Cisco Firewall :: How To Connect ASA5505 Behind ISP Netgear DG834 ADSL Router

Jan 30, 2010

I am a beginner to ASA. I am trying to connect the ASA 5505 behind the netgear ADSL router which is getting dynamic IP address from the ISP. How to configure the ASA5505 outside interface for SSL VPN connectivity?

View 8 Replies View Related

Netgear N150 Router Cannot Send Wireless Signal To Devices?

Mar 7, 2012

my netgear n150 router can not send wireless signal to devices.what is wpa or wps. how can i find my wireless user name and password. does paying 80.00 dollars to netgear solve problem.

View 1 Replies View Related

Toshiba Laptop With Windows 7 Will Not Connect To Router

Nov 29, 2011

The problem is I cannot get wife's laptop to connect to router. i had to reset router due to some connectivity problem. I reset router, set the router's name to wife's laptop, created a password. when i log on to wife's laptop, i can see the connection but when i click connect i get nic card disabled. i checked the card and it is not showing as being disabled. i am conncected via my desktop to the router and i connect fine. laptop is toshiba w/ win 7 home 64 bit. i have tried several ways to connect but still get network cable disconnected.

View 4 Replies View Related

Red Internet Light On Netgear DGN1000?

Jan 15, 2012

last Monday night, out internet just stopped working completely. We had an older Livebox (Inventel) and after phoning tech support, we were told it was a problem with the router. The problem was with the "@" symbol flashing about once a second. Anyway, they sent over a new router. This was the netgear1000. We set it up and the Internet light stayed red - all the other lights that are meant to be green are green.. We checked the details against what was on the personal detail card they sent over with the router and all of that was correct. It even shows the upload and download speed even though we cannot connect to the internet. When I check the status, it states that the LCP is ready to come up or something along those lines and that the CHAP authentication failed. I phoned them up again and they couldn't solve the problem so it's being moved up to a different department apparently. Anyway, I don't get how it can be an error with the username and password if my old router just stopped working with nothing being changed. The phone line is fine and the tech guy even changed our password.

View 4 Replies View Related

Netgear G54 Wireless Router - Can Only Connect One Laptop At A Time

Oct 22, 2011

I have to reconfigure the wifi connection everytime a new laptop comes into my house -- and we can only use one computer at a time with this router...huge problem with a big family..

View 1 Replies View Related

Toshiba Laptop Can't Connect To Wireless Internet

Jun 19, 2011

Toshiba laptop has been connecting fine to internet but now its not, i have wired it up to router and all im getting is local access my other laptop is working fine.

View 2 Replies View Related

Wireless :: My Toshiba Laptop Won't Connect To Internet

Nov 29, 2012

I have a toshiba windows 7 laptop that will not connect to the internet. I have a linksys E 1500 wireless router that has been working fine till today. It says I have great connection but won't open any webpages. I tried hooking it manually to an ethernet cable and it still will not connect.

View 2 Replies View Related

Netgear DGN1000 - Accessing Devices On Subnet?

Sep 9, 2012

I have a Netgear modem/router [DGN1000] (192.168.0.x) that serves as a the router for network 1 and also as the internet gateway. I have a Cisco [E4200] (192.168.1.x) router connected to the Netgear modem via the WAN port on the Cisco. This serves as the router for network 2.

DHCP is turned on for both routers. I can access all devices on network 1 using any device o network 2 including the Netgear modem configuration page, but I cant access any device on network 2 from network 1. Is it possible to have access to devices from both networks? [URL]

View 3 Replies View Related

Netgear Wireless Router / Connect Cannon Printer To Laptop?

Oct 13, 2012

I'm trying to connect my cannon printer to my laptop. I have a Netgear Wireless Router. My wifi is passworded. I can't get past the access point. I'm stuck in set up mode. It wants me to hold down the access point on my router and I don't have an access point button on the router.

View 1 Replies View Related

Copyrights 2005-15, All rights reserved