Belkin Router N150 - Laptop Cannot Connect To Internet
Apr 30, 2012
I recently bought a router so I could connect my Toshiba laptop to the internet. After I connected the ethernet cable to the router and plugged everything in, I installed the program from the CD that it came with. After the whole process, it says "You are now connected to the internet!". Yeah well when I try to get on the internet, it suddenly takes the connection off. On my wifi status, it says it's not connected anymore. When I try to connect again, it says I'm connected, although if I get on internet explorer, it takes off the connection again. Though when it is connected, it says no internet connection available although I am connected to the router. So basically, I'm connected to the router, but not the router to the internet.
View 4 Replies
ADVERTISEMENT
Jun 3, 2013
I cannot get my belkin n150 wireless router to connect to my laptop or ipad - wireless connection was working but stopped - so i attempted to re-configure the ip protocols on the router using the 198.168.2.1/ password - changed the ip setting on the belkin page but did not reset or set address (DHCP).
View 1 Replies
View Related
Jan 21, 2013
I have a Dell Inspiron 1525 laptop. It will not connect wireless to my Belkin N150. It use to, then one day it quit. I have an HP laptop and it connects wireless just fine. So I don't think it is the router. I have tried to reinstall the router. And the PC tells me there is a network available, but it will not connect. My question is... Can the wifi card be bad? Is there a key combination that might have been put in by accident?
View 1 Replies
View Related
Sep 4, 2012
My router is not connecting my laptop to the internet. The icon at the bottom states that I am connected and have an excellent connection.checking the router, starting and restarting router but still no connection.
Windows XP
HP laptop
Verizon ISP
View 3 Replies
View Related
Oct 29, 2012
I havent been able to connect to the internet with my wireless Belkin N150 router in 2 days! I have tried everything. I have done everything on this website and it still will not get on the internet. My modem works fine.
View 3 Replies
View Related
Nov 5, 2012
Can the N150 be set up so that it just runs a private network - not connect to the internet? The auto-setup doesn't seem to work without a modem attached to it and I don't want it to be hooked up to the outside world, just a few computers and a NAS device on a private net.
View 1 Replies
View Related
Apr 14, 2012
How do I get my verizon usb mobile modem to work with my wireless router? My router is a Belkin N150.
View 1 Replies
View Related
Nov 26, 2012
I can't seem to get my Canon MG5220 Wireless Printer to connect to my Belkin N150 wireless router. The printer sees the belkin wireless router network name but cannot connect to it( after entering the correct security key). It worked fine with a previous wireless router. My desktop PC is connected to the belkin router via direct ethernet, and I want to be able to access my wireless printer which is located in another room from my PC. I think I remember reading that the canon mg5220 may not support WPA2 security, but Its only a year old and would prefer not to regonfigure my router's security setting. how I can get this printer to connect to my router? Any other ways to access this printer from my PC which is connected to LAN via ethernet?
View 3 Replies
View Related
Jun 20, 2012
I'm trying to set up my desktop using windows xp and a wireless belkin n150 f9k1001 router to connect to a wireless network that is being sent from a mac with some tp-link router so that I can connect to the internet the isp is bell aliant. I'm not entirely sure how to go about this or if it's possible I've tried the worthless tech support and setting it up as an access point but I don't really know what im doing.
View 1 Replies
View Related
Mar 27, 2011
My WinXP Home PC won't connect properly (limited connectivity/no internet) via ethernet cable to my router (Belkin N150). Ipconfig /all shows the IP address as 169.254.117.71 but this is determined by an entry in the registry at HLMSYSTEMCurre....'DhcpIPAddress' - REG_SZ - 169.254.117.71. Also listed at 'IPAutoconfigurationAddress'. My laptop connects fine plugged into the same port getting it's IP automatically (192.168.2.2) and getting internet fine. I've tried adding a DWORD entry 'IPAutoconfigurationEnabled' = 0, also tried deleting the 2 values.Tried setting the IP manually to 192.168.2.6 - limited connectivity goes away but I get no internet connection from the router nor file sharing.
View 6 Replies
View Related
Oct 16, 2011
I have recently wiped my hdd and installed WinXp, I use to have vista but a crash occurred. I have WinXP SP3 with a Belkin Connect N150 connected to a Arris Telephony modem from Comcast. My setup use to work on vista. I've ran belkin setup from the disc multiple times and it gets to the part where it says connect and make sure cables are connected. All cables are connected, but my router has a solid amber light. I can access arris through wired internet, but I really want my wireless to work.
View 3 Replies
View Related
May 28, 2013
After much troubleshooting to connect and stream content from my desktop to my blu-ray player, it only works if my laptop is also connected to the network. I use a Belkin N150 F9K1001v1. I cannot for the life of me figure out why it will stream just fine as long as my laptop is running as well. I am confused if this is an issue with the router or with Windows7 Homegroup (though other share options proved unfruitful).
View 2 Replies
View Related
Apr 10, 2013
I recently had trouble with my Comcast Xfinity internet service and called to have them send a refresh signal. I was up and running again with my ethernet, but my wireless service using a Belkin N150 wireless router hasn't worked.From everything I had read I needed to do a hard reset of the Belkin N150 router and then reconfigure it's settings. Well I did the hard reset and power cycled everything, the modem, computer and router. I then plugged in everything again and connected the modem to the WAN on the router with one cable, and the computer to the LAN on the router with another cable. (I am using a Macbook Pro operating with Mac OSX). Now I cannot connect to the url...to configure the settings on the router at all!
I think the problem has something to do with my IP address. I opened the network settings and saw that my IP address is 50.138.25.x while my Subnet Mask is 255.255.254.0 and the router is being listed as 50.138.24.x. How to change this IP address to get my router connected or could it be another problem?
View 8 Replies
View Related
Jan 13, 2012
I bought my dad a Netgear N150 DGN1000 Wireless ADSL Router to replace his D-link router which kept dropping the wireless signal. I have established a wired connection and my ipad, iphone and his old laptop connect wirelessy to it without any problems but I just cannot work out why his laptop won't connect to the internet.It recognises the wireless signal and it says its connected and that the signal is excellent but when I try to go on the web or check emails it just won't work.I've tried deleting all his wireless networks and starting from scratch but don't know what else to tryHis PC is running windows Vista
View 9 Replies
View Related
Jan 11, 2013
Can't use internet and phone at the same time on the N150 router. On DSL and whether on the DSL line or using VOIP when using the phone the internet goes down.
View 9 Replies
View Related
Nov 3, 2012
I recently got a Belkin N150 Enhanced Router Model F6D4230-4 V1. I upgraded it to the recent firmware.
I use it NOT to access internet, but only to hook up my desktop computer with my laptop and my tablet PC. I use Win7 Ultimate on both computers. I configured a Win7 home network and I managed to access shared files between the 3 devices.
However, the speed is very very low, not going over 1.5 MB per second , sometimes even less, although the signal strength is the maximum (54).
The distance between the laptop and the desktop is only 4-5 meters, in the same room. My laptop is HP Compaq 6710b which has what seems to be a "Intel(R) PRO/Wireless 3945ABG Network Connection" .
Transfer speed is the same whether transferring from or to the laptop. I configured the laptop according to the instructions in the manual.
View 8 Replies
View Related
Mar 2, 2011
I'am having problems when connecting to the internet. I'am running Win7 64-bit and i have Belkin USB wireless adapter( Belkin surf N150) When i first bought the adapter it didnt connect to internet, so i though it is not working and i got it replaced. I got the same problem with the second one as well, and then i have changed the wireless mode on the device manager from: IEEE 802.11b/g/n to: IEEE 802.11b and eventually i have connected to internet without any errors, but in this mode the internet is unbelievably slow which is very slow when compared to another wireless mode where i have changed it from. So my question is why i can't connect to internet IEEE 802.11b/g/n in this mode? The weird thing is that some times it connects to internet with no error and dissconnects again in a short while. Also when the windows tries to repair it, i get this report:
Windows Network Diagnostics Publisher details
Issues found
Problem with wireless adapter or access pointProblem with wireless adapter or access point Not fixed
Refer to Windows Help and Support for more information about wireless connectivity problems Failed
Reset the wireless adapter Completed
Investigate router or access point issues Completed
[code]....
View 17 Replies
View Related
Nov 17, 2012
I have a d-link n150 model (wireless router) that i cannot get to pick up the signal of an 3G mobile broadband optus prepaid stick when pluged in. I have reset the router settings multiple times and nothing. Nether had a router before this one .How do i fix this problame and is it possible that the problame is in the settings of the internet stick?
View 3 Replies
View Related
Sep 16, 2011
I am trying to set my NETGEAR N150 DGN1000 .I can connect to the router via wireless but no Internet.Theh INTERNET PORT indicator on the router is goes to OFF mode.Before I try this I had Internet with the same line with a different router..
View 3 Replies
View Related
Nov 26, 2012
I can't seem to get my Canon MG5220 Wireless Printer to connect to my Belkin N150 wireless router. The printer sees the belkin wireless router network name but cannot connect to it( after entering the correct security key). It worked fine with a previous wireless router. My desktop PC is connected to the belkin router via direct ethernet, and I want to be able to access my wireless printer which is located in another room from my PC. I think I remember reading that the canon mg5220 may not support WPA2 security, but Its only a year old and would prefer not to regonfigure my router's security setting. how I can get this printer to connect to my router?
View 2 Replies
View Related
Nov 7, 2012
iI downloaded belkin n150 router where do I find network security key
View 1 Replies
View Related
Jul 12, 2012
I have just bought a Belkin n150 router. Connected it to my modem and PC and I'm recieving internet. Connected my phone and laptop and getting wireless.The issue, however, is that I cannot login to the router page. The login says to leave blank for default, but it gives me an incorrect password error. I have tried resetting using the button located above the power cable to go back to defaults, but I continue to recieve the error.
I have tried a all the other usual default passwords, password, administrator, admin, etc.I've gone through pages of google search results and found nothing. Have I missed something obvious or did Walmart sell me a defective router?
View 1 Replies
View Related
Oct 22, 2012
My N150 router V1 is blinking orange, reset tried many times but nothing works, its less than a year old but i dont have the receipt any more.
View 1 Replies
View Related
Nov 7, 2012
iI downloaded belkin n150 router where do I find network security key
View 1 Replies
View Related
May 8, 2012
I have one desktop PC at home, Windows XP, and have a Time Warner wired modem for internet. I work from home and connect to my office computer through Remote Desktop Connection.I purchased a Roku2 video streaming player and bought a Belkin N150 wireless router in order to get the signal from my desktop computer out to the living area where the Roku is located. The connection with the Roku is perfect. However, my remote desktop connection now disconnects constantly and internet browsing on the local computer is very slow and choppy.The configuration I used is 1) Belkin ethernet wire from Belkin to back of modem 2) modem ethernet wire from Belkin to computer.If I remove the Belkin and put everything back the way it was, all is fine ... but, of course, we then have no Roku.
View 2 Replies
View Related
Jan 30, 2012
I just installed a Belkin N150 wireless router to use with our iPhones which it is working great. But I also have my desktop pc attached to the router as a wired connection and the down load speed on the desktop pc has decreased dramatically. for example it took 10 minutes to download a 30 sec video.Before I installed the Belkin router I had no downloading issues. This is on a dial up modem.
View 5 Replies
View Related
Dec 17, 2012
I bought "Belkin N150 Wireless Modem Router" and while installing noticed that the ADSL slot is too short that does not fit the LAN chord, instead fits the telephone chord. How do I fit the LAN chord fit in the ADSL slot? Any alternatives? My ISP comes with a LAN chord and is connected directly to my PC.
View 3 Replies
View Related
May 12, 2011
I cannot seem to navigate to the solution on my own so here I am. My laptop cannot connect to the internet through the Belkin N Router, though does recognize the router. We have another laptop that does and works fine, but my laptop fails.
Here is the ipconfig info:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Brian-Laptop
Primary Dns Suffix . . . . . . . :
[Code].....
View 8 Replies
View Related
Apr 3, 2011
I have had my laptop for over a year and it usually connects fine but two days ago I turned it on and it simply won't pick up on the signal coming from my router. I have a computer and another laptop connected to this same router and they are both working fine. It just says that there are no connections available even though the router is on and showing up on the other two machines. The router is a Belkin and the laptop a Dell, Windows 7.
View 7 Replies
View Related
Feb 5, 2013
have a home Sony VAIO Computer running XP Media Center Edition, Belkin Wireless N Router, HP B209 Wireless printer, 1 year old Lenovo laptop, and an iPhone 4s.I can't make them all play together.I noticed yesterday that my iPhone hadn't been connecting to the WiFi for several days, so I tried to see what might be going on. I tried to force pair the iPhone by turning off Data Connection, which usually forces the WiFi, which it did, but then when I went to a webpage it wouldn't load even though wifi was showing full signals.I then booted up my lenovo laptop, and it connected to the internet and worked like a charm. Then my iPhone4s started working again. Why not now finally set up the wireless aspects of my HP B209 that I've never used, so I can print from my laptop wirelessly, which I've always wanted to do.So I was able to setup the printer after adding the MAC address of the printer to my belkin router by going to the IP address for the router and adding that specific address, I changed NOTHING ELSE.Internet on laptop not working now. It shows my wireless network with full bars in range, but when I go to connect it simply says it cannot connect, right away. I check my phone, wireless GONE again! I tried to force pair the phone, no dice. I "forget the network" on my phone, it still shows available, I connect put in my password and it immediately denies me, I tried un-plugging the router, restarting all computers, un-plugging router -and- restaring all computers, turning off the printer, repeating all previous steps, and finally I went and deleted the MAC address I added to the router, and all of the above did nothing to fix the solution.
View 4 Replies
View Related
Dec 19, 2011
basically we got sent this new router from Orange (our ISP) and we have had problems with it for the last week. The router model is the Netgear N150 DGN1000. Sometimes I connect it will be absolutely fine, but then the next time I log onto my laptop it can't identify the network, it says connected but doesn't have the globe in the bottom right hand corner of my screen. Then we have to reset the router a few times everytime until it recognises it, even though the settings are saved when we connected last time. It is the same with my sisters laptop. We both have Atheros network adapters so that may be a compatability issue with the router, but my brother connects fine on his everytime. A similar problem occurs with modern warfare 3 on my ps3, it won't let me sign in to playstation network half the time and keeps saying NAT type failed, even though NAT is enabled on my router. get this problem sorted and to get a consistent network connection that connects every time that would be great. We changed the security type to WEP on it a few days ago from WPA and that meant we could sign into modern warfare 3 some of the time rather than never, but we are still having issues.
View 8 Replies
View Related
Jan 9, 2012
I have just changed isp's from talktalk to bt and becose I use an IP security camera, I want to use my belkin modem router. Bt will not even try to set the router up to enable bt bb "even though when going to them they said they would". How to set the belkin N150 for bt broadband.
View 1 Replies
View Related
Apr 15, 2012
i cant find my disc for setup?
View 2 Replies
View Related
