I cannot seem to navigate to the solution on my own so here I am. My laptop cannot connect to the internet through the Belkin N Router, though does recognize the router. We have another laptop that does and works fine, but my laptop fails.
Here is the ipconfig info:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Brian-Laptop
Primary Dns Suffix . . . . . . . :
[Code].....
I recently bought a router so I could connect my Toshiba laptop to the internet. After I connected the ethernet cable to the router and plugged everything in, I installed the program from the CD that it came with. After the whole process, it says "You are now connected to the internet!". Yeah well when I try to get on the internet, it suddenly takes the connection off. On my wifi status, it says it's not connected anymore. When I try to connect again, it says I'm connected, although if I get on internet explorer, it takes off the connection again. Though when it is connected, it says no internet connection available although I am connected to the router. So basically, I'm connected to the router, but not the router to the internet.
View 4 Replies View RelatedI'm having this weird issue with my internet in which my desktop is having inconsistent internet connection, but when I check on my laptop (same room) it shows no problem.I have ATT Uverse, and my desktop's adapter is Belkin N750 DB Wireless-N Dual-Band USB Adapter, while my laptop has some adapter (I don't know the brand, but I know it's 802.11g.Also, my Desktop has much better specs than my laptop. My desktop has i7 intel processor, 4GB RAM (x4 total of 16) and 60 GB SSD boot drive and 2 TB hard drive for all the other softwares. My laptop on the other hand is a Sony Vaio with 8GB RAM and 500 GB hard drive.When going through these inconsistent internet connection phase, my desktop can drop to not even a megabyte per second, while my laptop may be at 8~10 MB download speed, but a tthe same time the ping on my desktop is around 5, but my laptop shows around 17.
View 1 Replies View RelatedMy router is not connecting my laptop to the internet. The icon at the bottom states that I am connected and have an excellent connection.checking the router, starting and restarting router but still no connection.
Windows XP
HP laptop
Verizon ISP
Belkin n wireless router model number F5D8236 v1! my modem is showing an internet connection but my router "modem" light is flashing orange and my internet light doesn't even come on. we are not sure but we believe this became a problem last night after my daughter connected her new lap top to the wireless connection.
View 1 Replies View RelatedI am using Belkin router for my laptop . Once I shut down my laptop suddenly the router stops working and hence if some one else is using the wi-fi network, he is loosing the connectivity. For that I have to restart the router everytime when ever I shut down my laptop.
View 1 Replies View RelatedI have had my laptop for over a year and it usually connects fine but two days ago I turned it on and it simply won't pick up on the signal coming from my router. I have a computer and another laptop connected to this same router and they are both working fine. It just says that there are no connections available even though the router is on and showing up on the other two machines. The router is a Belkin and the laptop a Dell, Windows 7.
View 7 Replies View RelatedNewer router purchased in Sept. 2012, can't get laptop connected to it.
View 1 Replies View Relatedhave a home Sony VAIO Computer running XP Media Center Edition, Belkin Wireless N Router, HP B209 Wireless printer, 1 year old Lenovo laptop, and an iPhone 4s.I can't make them all play together.I noticed yesterday that my iPhone hadn't been connecting to the WiFi for several days, so I tried to see what might be going on. I tried to force pair the iPhone by turning off Data Connection, which usually forces the WiFi, which it did, but then when I went to a webpage it wouldn't load even though wifi was showing full signals.I then booted up my lenovo laptop, and it connected to the internet and worked like a charm. Then my iPhone4s started working again. Why not now finally set up the wireless aspects of my HP B209 that I've never used, so I can print from my laptop wirelessly, which I've always wanted to do.So I was able to setup the printer after adding the MAC address of the printer to my belkin router by going to the IP address for the router and adding that specific address, I changed NOTHING ELSE.Internet on laptop not working now. It shows my wireless network with full bars in range, but when I go to connect it simply says it cannot connect, right away. I check my phone, wireless GONE again! I tried to force pair the phone, no dice. I "forget the network" on my phone, it still shows available, I connect put in my password and it immediately denies me, I tried un-plugging the router, restarting all computers, un-plugging router -and- restaring all computers, turning off the printer, repeating all previous steps, and finally I went and deleted the MAC address I added to the router, and all of the above did nothing to fix the solution.
View 4 Replies View RelatedWe recently switched from ATT to Comcast in our house so we needed a new router since 2wire won't work with the Comcast modem. So we installed the router - no problems. Its been working great for about 3 weeks now, but yesterday when I tried to get on, it said the router had "no internet access" and I haven't been able to get it to work since.I have restarted the router, the modem, and my computer several times and reset the router to factory settings to no avail. I thought it might be a problem with comcast (maybe the storms knocked something out) but the modem is working fine; TV and phones still work and all of the lights on the modem box (power, DS, US, Online, ect.) are still on. I called comcast and they said they have registered no issues in the area.Right now I'm connected to the internet through the modem. I've tried everything I can think of[CODE]
View 10 Replies View RelatedI have unplugged everything and restarted everything in the correct order. I have connectivity to the modem if I plug ethernet cable into cable modem, but cannot get any connectivity if I plug into the wireless router and then into the cable modem. I am using a desktop computer and only use the wireless modem for my phones wi-fi.
View 2 Replies View RelatedI have recently bought a Belkin N300 Wireless N Modem-Router and am unable to connect it to the internet. My laptop registers the router but the router won't connect to the internet. The router also is blinking a red light.
View 2 Replies View RelatedI recently changed my internet connection from a very slow adsl connection (im a LONG way from the exchange) to a moderatly faster vdsl connection. With the upgrade, they force me to use a modem that looks like it was made 20 years ago (although they say its had all the internals upgraded a month ago) leaving me to use a seperate router for wireless signal. I bought a bellkin F9K1002 v3 and after a little hassle had it up and running, the network connection between all the systems is great, but the router drops the internet connection every 30-120 seconds, for 15-20 seconds each time. I have about 10 devices connecting, but problem is there with just 1 connection wired or wireless.
I've tried calling my ISP (who will not touch router settings) and belkin tech support (who sound like they touched their first computer about 22 seconds ago) with no improvement. I've connected directly to the modem and had perfect connection for 12 hours, ruling it out of the equasion. I've disconnected all systems but one at a time, trying on 3 systems, with no improvement. I've turned off firewall, WPS, tried multiple wireless settings (channels and such) updated firmware all with no improvement. Here's a sample of the system log on the router:
Jan/1/2000 00:27:59 WAN PPPoE client receive
PADS
Jan/1/2000 00:28:00 WAN PPPoE client PAP
[Code].....
I have a belkin wireless router/modem running our home network. We connect using 3 android devices, a wii and wireless printer with no problems. However, when connecting using either a windows 7 or windows XP laptop the internet connection is lost after a couple of minutes. I can't work out the cause of the problem but resetting the router gives a couple of minutes of browsing before it goes again. I have tried using static IP addresses for the laptops but this hasn't worked, furthermore I have tried a winsch reset.
View 2 Replies View RelatedI am having trouble keeping a stable internet connection when connecting through the router. I am on my third new router in one week thinking it was a router issue but I don't think so anymore. I am on cable internet using a motorola surfboard modem. The router I bought is a Belkin N750. I also tried a Cisco E1200 and EA2700 with no luck. I have been on the phone with support for probably ten hours total and tried all of their settings to no avail.
View 4 Replies View RelatedI recently bough a belkin router (Share N300) but it just wont connect to the internet.My setup is as follows:ADSL -> Modem -> Router -> PCThe internet works fine when I connect it directly to my PC (via the modem), and other PCs too.So no issue of MAC address lockdown.I've tried connecting through static mode with the data from ipconfig /all, but it still doesn't work.I've even installed DD WRT and Tomato to no avail.
View 2 Replies View RelatedI've just replaced my crappy TalkTalk router with my Belkin F5D9630-4 (v1001) to try and give myself a bit more wireless coverage in my flat. No matter what I try I just can't get the router to connect to the Internet.I've updated the router to the most recent firmware, and entered the following settings in my setup for the router:[CODE]
View 11 Replies View RelatedI have a Belkin G Wireless Router which until recently, apart from a few signal drop-outs, was working fine.A couple of weeks ago, I tried to connect to the internet but despite the icon on my netbook showing that my Wireless Network Connection is connected and has excellent strength, I am unable to open any webpages etc. I tried re-booting the router but it is still not working.
The modem is working fine as I am able to access the netbook if I plug my netbook into it directly and I don't think it is an issue with my netbook as I have the same problem if I try to connect my HTC Smartphone to the internet through Wi-Fi too, eg recognises signal but cannot access pages.The router was permanently plugged in and turned on which I have since heard tends to burn them out so I am thinking it might be an issue with the router.
i m using belking sufr n300 but i m not able to access internet. if i connect brodband cable directly to computer then i am able to browse.
View 1 Replies View RelatedI have a Wimax internet connection via an ethernet cable from a small roof top receiver dish. Inside the house the cable (RJ45) is plugged into the POE slot on one side of a small electrically powered black box, and from the other side, an ethernet cable (RJ45), connects to my PC. I want to share my internet connection with my HTC mobile and would prefer to make use of an existing Belkin 54g ADSL2 modem/wireless router (Belkin F5D7633) if I can. As this router's incoming port is specifically for ADSL my internet RJ45 cable can not plug into it. I have been advised that I can still utilise the router part of the Belkin though, using my PC as an access point, by plugging the ethernet cable from the PC side of the little black box into LAN 1 on the router, then joining the PC to LAN 2 of the router with another ethernet cable.I did not alter the configuration of the Belkin at all (having reset factory defaults beforehand), mainly because although I could access the internet from my PC and my mobile, I could not access the IP address of the router, presumably because the properties of the local area connection on my PC remained unchanged with the IP address (172.168.1.149), Subnet Mask (255.255.255.0), Default Gateway (172.168.1.1) and 3 DNS addresses (172.168.1.1) (10.30.0.1) (8.8.8.8) as they were before hooking up the Belkin. The IP address the mobile received through WIFI on connecting to the Belkin was 172.168.1.148
I was not unduly concerned about not being able to access the configuration of the router as everything was working as I had hoped it would and even when I powered off my PC I still had internet access on my mobile. On rebooting the PC, however, I found that the router changed the DNS addresses on the PC to 2 only, both identical (192.168.2.1) and the IP on the mobile was allocated 192.168.2.2 Although I could still access the internet on my PC, I no longer had access from my mobile although the WIFI connection to the Belkin showed as being 'excellent'. When I did a 'repair' of my internet connection, hoping to revert to a fully operative state, the PC configuration changed again as follows: IP address becomes that of the router (192.168.2.1), Subnet Mask (255.255.255.0), Default Gateway (192.168.2.1), 2 DNS addresses (192.168.2.1) and the IP address allocated to my mobile remains (192.168.2.2) This configuration means I have no internet access from either PC or phone, but CAN access the router configuration. I restored a usable operating state by unplugging the power from the router, transposing the cables in the LAN ports on the router (swapped cable from LAN1 to LAN2 and vice versa), turned off WIFI on mobile and waited a minute or two. When I powered the router back up and switched on mobile WIFI again, everything was restored to the original working state and I have, once again, access to internet on both PC and mobile. It is very frustrating, however, to keep performing this ritual and I wonder if any of you more technically minded, know a way to work around this, perhaps by manually changing the configuration of PC or router?
A couple nights ago, in the middle of my surfing the net, i was cut off and 'checked the modem (working good) and the router, displaying blinking amber lights --modem and internet. I had to restart my router, usually, it would work after that and i could surf again. This time, when it started back up, the router light turned blue and then the modem and internet light started blinking amber. I haven't done anything except chat over the net when it happened. All other lights are blue. I have cycled the modem power, the router power, and restarted the computer and have the same results. I already followed the troubleshooting from Belkin support 192.168... completely restore it to it's factory settings and yet, i still end up not being able to connect in the internet and with that blinking amber lights. I already tried connecting directly from my modem to my win 7 laptop --no problem at all. I could surf and chat. but when i tried connecting it again from modem to router so i can do wireless.
View 4 Replies View RelatedJust purchased a Belkin N600 DB N+ Wireless Router because the wireless on my Actiontec PK5000 really isn't so great. When I hook up the router to my modem and after running the install CD I couldn't get connected to the internet. So I looked at my modem and noticed the light where I had plugged in my router VIA ethernet wasn't lit up like the rest of my ethernet ports even after switching them around.
View 6 Replies View RelatedMy computer sees my network, but I can't connect to the internet wirelessly. If I plug in the Ethernet cable from the modem I can access the internet. So, I've narrowed this down to something with my router.
OS: WIN7
Router: Belkin N750 DB N+
Steps taken:Modem and router have been shut down and restarted.Router has been returned to factory settings and reconfigured.Validated with my ISP there are no issues with my internet service. Router software has been uninstalled, reinstalled I do not use McAfee. I've run a full virus scan, a full malware scan and just for good measure, a defrag. I've checked my firewall.
My neighbor is using my Belkin Router the basic one and has comcast. We both use his internet and have had no problems until the past 3 days. He just got the home phone service from comcast and the phone line is setup through the modem. Ever since comcast came to his apartment and set this up the home phone service to his modem the router is connected but there is no internet access. What is going on and how can I fix this. He has an HP with windows Vista and I have a Toshiba Satellite L675 that has Windows 7 Home premium edition on it.
View 1 Replies View RelatedI have a N450DB wireless N Router model number F9K1105 and I'm connected to the internet with an occasional interuption. The light on the front of the router is blinking orange and I have reset it and powered it down several times with no luck. According to my settings I have the newest firmware and all updates have been performed.
View 3 Replies View RelatedFor some reason my laptop has stopped connecting to my wireless network. It shows up as available with Excellent signal. I know the password is correct and that hasnt changed but now when i right click and connect it INSTANTLY says "Windows cannot connect to Area51" before it even seems like its tried. I gave windows a chance and see what it thought. Just told me to restart the router which i had already and that didnt work.Tried changing the encription method and its made no difference, be it AES, TKIP, AES + TKIP, WPA-PSK, WPA2-PSK. Every setting i try just doesnt work, but i can connect with my iPhone?!
Here is the details from CMD
Quote:
Wireless System Information Summary
(Time: 26/04/2011 19:31:38 GMT Daylight Time)
=======================================================================
============================== SHOW DRIVERS ===========================
=======================================================================
Interface name: Wireless Network Connection
Driver : Atheros AR9285 802.11b/g/n WiFi Adapter
Vendor : Atheros Communications Inc.
Provider : Atheros Communications Inc.
[code]...
I have a belkin N600 I believe and I ran the ipconfig/all and got this
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:UsersMichael>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Nero
Primary Dns Suffix . . . . . . . :
[code]....
also every other device I have can connect except one laptop, ipod, printer, xbox360 all connect just fine. and I have tried iprelease and renew.
My belkin , model# f7d5301 v1 is not compatible with my hp laptop.
View 1 Replies View RelatedI'm currently using a Belkin F5D8233 wireless router and an HP DV6 laptop. My internet used to work just fine, but after I reinstalled my OS a couple of months ago I started having a funny problem. My internet will randomly stop working, I'll visit facebook, check a blog, and then i'll try to check my email and the page won't load. Then my internet won't work again until I reset my computer. The weirdest part is that Windows acts there's nothing the matter. The little icon in the notification bar still says it's connected and if I click repair, windows tells me there's nothing to repair. My wife has a different laptop and she's still able to access the internet fine after I've been kicked off. I've checked for a router firmware update and it's up to date. I bought a usb wireless-n adapter thinking my laptop's adapter might be bad and that didn't work. I considering buying a new router, but I'm not confident that will solve the problem since my wife's internet is still fine and because my internet works again when I reset, so it's not like the router is blocking my IP right?
View 3 Replies View RelatedAfter much troubleshooting to connect and stream content from my desktop to my blu-ray player, it only works if my laptop is also connected to the network. I use a Belkin N150 F9K1001v1. I cannot for the life of me figure out why it will stream just fine as long as my laptop is running as well. I am confused if this is an issue with the router or with Windows7 Homegroup (though other share options proved unfruitful).
View 2 Replies View RelatedI cannot get my belkin n150 wireless router to connect to my laptop or ipad - wireless connection was working but stopped - so i attempted to re-configure the ip protocols on the router using the 198.168.2.1/ password - changed the ip setting on the belkin page but did not reset or set address (DHCP).
View 1 Replies View RelatedI have a Dell Inspiron 1525 laptop. It will not connect wireless to my Belkin N150. It use to, then one day it quit. I have an HP laptop and it connects wireless just fine. So I don't think it is the router. I have tried to reinstall the router. And the PC tells me there is a network available, but it will not connect. My question is... Can the wifi card be bad? Is there a key combination that might have been put in by accident?
View 1 Replies View RelatedI just bought Lenovo ideapad with window8 and touch screen, my problem is when I try to connect it through my belkin n300 is always saying restart the computer. when I plug in Ethernet cable from the router to the laptop is working fine.
View 6 Replies View Related