I have unplugged everything and restarted everything in the correct order. I have connectivity to the modem if I plug ethernet cable into cable modem, but cannot get any connectivity if I plug into the wireless router and then into the cable modem. I am using a desktop computer and only use the wireless modem for my phones wi-fi.
View 2 RepliesWe recently switched from ATT to Comcast in our house so we needed a new router since 2wire won't work with the Comcast modem. So we installed the router - no problems. Its been working great for about 3 weeks now, but yesterday when I tried to get on, it said the router had "no internet access" and I haven't been able to get it to work since.I have restarted the router, the modem, and my computer several times and reset the router to factory settings to no avail. I thought it might be a problem with comcast (maybe the storms knocked something out) but the modem is working fine; TV and phones still work and all of the lights on the modem box (power, DS, US, Online, ect.) are still on. I called comcast and they said they have registered no issues in the area.Right now I'm connected to the internet through the modem. I've tried everything I can think of[CODE]
View 10 Replies View RelatedI recently bought a router so I could connect my Toshiba laptop to the internet. After I connected the ethernet cable to the router and plugged everything in, I installed the program from the CD that it came with. After the whole process, it says "You are now connected to the internet!". Yeah well when I try to get on the internet, it suddenly takes the connection off. On my wifi status, it says it's not connected anymore. When I try to connect again, it says I'm connected, although if I get on internet explorer, it takes off the connection again. Though when it is connected, it says no internet connection available although I am connected to the router. So basically, I'm connected to the router, but not the router to the internet.
View 4 Replies View RelatedI recently bough a belkin router (Share N300) but it just wont connect to the internet.My setup is as follows:ADSL -> Modem -> Router -> PCThe internet works fine when I connect it directly to my PC (via the modem), and other PCs too.So no issue of MAC address lockdown.I've tried connecting through static mode with the data from ipconfig /all, but it still doesn't work.I've even installed DD WRT and Tomato to no avail.
View 2 Replies View RelatedI've just replaced my crappy TalkTalk router with my Belkin F5D9630-4 (v1001) to try and give myself a bit more wireless coverage in my flat. No matter what I try I just can't get the router to connect to the Internet.I've updated the router to the most recent firmware, and entered the following settings in my setup for the router:[CODE]
View 11 Replies View RelatedI just installed a band new copy of xp on my system and I cannot connect to the internet! I'm connected via Ethernet to my Belkin n600 HD and whenever I go try to follow the steps via Microsoft [Go into Network Connections > Create a New Connection > Connect to the Internet > Set up my connection manually > Connect using a broadband connection that requires a user name and password] It just brings up the old school dial up vpn style thing and never connects to the net. Secondly I tried to install the Belkin software but it just has errors trying to establish a connection with it. The Internet is working fine, I have 5 laptops connected to it.
View 3 Replies View RelatedMy Belkin wireless usb network adapter isn't connecting to the internet. The router and everything is fine as other computers in the house are working. It's just one desktop pc that isn't connecting.Our internet was running slower than it should and that was because we had too many wires and so in order to speed it up we decided to use a wireless connection instead of an ethernet cable.The problem seems to be that the adapter just isn't connecting. The little icon showing the status of the connection keeps going back and forth from no connection to attempting to connect.
View 14 Replies View Relatedi can't get my belkin wireless f5d6231-4 to connect to the internet I hooked up my router and i go to http://192.168.2.1 and it says that it is connected but when i click on firefox it says no internet connection or The connection has timed out. I hqave a cable modem i dont know if that is the reason
View 1 Replies View RelatedI have a belkin n300 and it whilst the modem itself is showing a static blue light, its coming up as an explanation mark on the wifi symbol on my macbook. This has been happening since yesterday when I was fiddling around with the settings on the IP address (192.168.2.1) to get the printer to work wirelessly which it did once then the wifi network went down.
View 1 Replies View RelatedI havent been able to connect to the internet with my wireless Belkin N150 router in 2 days! I have tried everything. I have done everything on this website and it still will not get on the internet. My modem works fine.
View 3 Replies View RelatedI have a N600 router. Yesterday, for the first time, I was unable to connect to the internet from my TV. It keeps saying network connection failed. I have unplugged the router and modem several times and that does not work. When I check the various wireless systems available (on the TV screen) I see mine there but it will not connect. At one point I did see something that said ethernet cable disconnected, but I checked and the cable is connected.
View 4 Replies View RelatedJust installed N600 router. Works for my Windows 7 PC and my Android phone. Does not work with my Windows VISTA PC. It connects to the Router ok, but does not connect with the Internet. Also says UNIDENTIFIED NETWORK. What am I missing?
View 1 Replies View RelatedCan the N150 be set up so that it just runs a private network - not connect to the internet? The auto-setup doesn't seem to work without a modem attached to it and I don't want it to be hooked up to the outside world, just a few computers and a NAS device on a private net.
View 1 Replies View RelatedI believe we accidentally changed the NAT on our wireless g MIMO F5D9230-4 router. Now only one laptop is actually connecting to the Internet, but it looks like our network isn't secure anymore. Our 2nd laptop is connected wirelessly to the router, but not the Internet. Our iPhones and iPad are not connecting at all.
View 1 Replies View RelatedEverytime i plug the cable into my PC it doesn't detect it and the helper says to insert an ethernet cable.When I go to network sharing centre and check my connections it says network adaptor unplugged.im using wireless at the moment.My pc is a packard bell ipower x9810. it was windows vista but i upgraded to windows 7, i checked the packard bell website and can't find any networking adaptors. I have also checked device manager and it says - Belkin N+ wireless USB adapter #4 NVIDIA nForce 10/100/1000 Mbps Ethernet. there is no yellow exclamation mark.
View 17 Replies View RelatedWireless Adapter D600 USB needs to connect to the internet to finish installing... Problem is, I bought it because I can't get my ethernet port to work on my desktop. It worked find in Windows 7, but Windows 8 needs more information.
View 1 Replies View RelatedI've got a new Belkin 150 wireless router, and have installed it successfully, with no issues with my Windows 7 laptop. My wife's Windows XP laptop, however, won't connect to the internet via this new router. I've restarted the computer and unplugged/restarted the router and modem in sequence with no success. I have no clue what is wrong - the XP laptop will connect but shows either "limited connectivity" or "local access only."
View 2 Replies View RelatedI'm having trouble connecting to my Belkin router wirelessly (Wired works fine). I try to get to the IP address (192.168.0.2 and every other version of that) but it does not connect. On the router only Security, Wired, and Router are lit up; Wireless, Modem, and Internet are dark. I have reached the end of my limited computer capabilities trying to fix this problem myself.
View 1 Replies View RelatedI have a Belkin router connected to my desktop. My tablet computer can connect, but my two new Samsung laptops cannot connect! They both see the network with a strong signal but it says it can't configure the router settings... It said to reset the router, which I've done several times, but they still won't connect. The playstation can also connect so I know it can't be the router or the playstation and tablet computer couldn't connect right?
View 7 Replies View RelatedMy belkin 54G was working few years now. Just hours ago, I try to connect my iphone 3GS with belkin wifi. I go to the 192.168.2.1 (on my laptop - wifi), MAC address filtering and enable it. After insert my iphone 3gs ip address i press OK.
Here's the nightmare begin, after minutes. My internet connection is not working both on my laptop (wifi working but not internet) and the PC facing problem on internet connection. i try login again 192.168.2.1, hoping can restore it but it fail to load the page.
how to restore it?
Below is the screenshot of what I did.
1. my ipconfig show new IP address, 169.254.242.229. i try using this address to access but fail to load.
2. ping 192.168.2.1 but unreachable.
3. detail of my network connection details.
4. set my TCP/IP properties
5. ipconfig manage to change it and ping working now.
6. to my disappointment, 192.168.2.1 still not working. can't enter it's web interface.
my Belkin routers wireless wont work. I tried unplugging it, resetting it, but nothing working. Ethernet is working fine, but I need wireless back ASAP.
View 1 Replies View RelatedI have a Belkin 802.11g wireless card on my laptop, I can see the router but when I try and join the router I have message about no I.P adress. Is there a way to get round this?
View 1 Replies View Relatedhow to connect my adsl connections with this router
View 1 Replies View RelatedI have a plain pc and an iPad 2 - my daughter has a Mac laptop - we have a dsl connection to the phone line and a belkin router to connect wirelessly
View 1 Replies View RelatedI got a new belkin router because I switched from Verizon to Comcast. I had to get a new router and got belkin.Now I can connect every device to it from wireless, ranging from my laptop to my phone. But jadoo box won't connect. Jadoo Box is internet TV box like Roku and apple TV but for international channels. I have tried switching password type from WPS to wep and basic stuff but nothing is working.
[code]...
For the past week or so I've been having trouble with my Wi-Fi connection. I have a desktop PC, a kindle and a PS3 that all connect to it.
If I turn on my Kindle after it's been off for a while it'll try to connect to the Wi-Fi but will keep alternating between 'Authenticating'/'Connecting' and never gets to the 'Obtaining IP Address' part so it shows the signal strength bars at the top but they're totally empty. If I go and unplug the modem and the router, let them sit for a minute, plug them back in the large light on the router will flash orange (it's usually green) so I press and hold the WPS button which begins to flash and then both lights turn green and the Kindle quickly connects itself to the Wi-Fi. If I don't let it go into sleep mode or turn it off it will stay connected but if it turns off I have to do the same modem/router reset. When I'm at school or work I have zero issues connecting their wireless networks.
With the PS3, if it's turned on while I reset the modem/router it will connect to the network but if it's turned off during the reset it will not connect when I turn it on later. Also, either way, it no longer connects to my media server (sharing files between the PC and the PS3) regardless of connecting or not.
Last week, a big storm rolled through my town while I was out of the area on business. I had a working LAN/WLAN for my home & home office, and the modem I was using got fried by the storm. Strangely enough nothing else was affected..Anyway, I went out and bought an identical modem, and had it set up with Comcast. If I connect directly to the modem, everything works perfectly. But when I try to attach my router to the new modem, I have no connectivity over wifi OR hardwired to the router. According to the status light on the router, it can't find a connected modem.I reset the router back to factory settings, installed the newest firmware, and moved my DHCP pool out of the default range. I then power cycled the whole setup - twice - with no success.
View 5 Replies View RelatedI've got a Belkin G wireless router.I've got my Vaio with windows 7 , my other emachines with vista and another acer laptop in the house also on vista/All laptops can connect to the router and internet fine but when I password protect the WI-FI the ACER aspire won't connect to the router, while the other 2 and also a ps3 all connect with the password no problems.
View 1 Replies View RelatedI have an iPad2 and a Belkin F6d4230-4 wireless router. I no longer have a computer. If I reset the router can I setup the network without having to hard-wire the router to a computer first?
View 3 Replies View RelatedI have and and android tablet I just bought and I can't connect to the internet with my Belkin N300 Router all my computers and smartphone work very good to this router and the phone works with wifi here also. I can't get this tablet to connect to the server I have put in all the ssid and the name of the server. When I try to connect it says connecting, then autherizing and then it does a loop and does not ever change,keeps on doing it. In the little shell that is to change color when connected there is a very small lock showing and I am not sure just what todo about this.
View 3 Replies View RelatedI have just purchased and successfully installed a wireless Belking router and although my pc connects perfectly my daughter cannot connect to the same router even with the correct security codes, what are we doing wrong
View 1 Replies View RelatedI can't get my Kindle Touch to connect to my Belkin router, I haven't had any problems until the last couple of days. I can connect my Kindle to the router at my work.
View 1 Replies View RelatedMy husband and I just got a Verizon MIFI Jetpack. My computer has an internal wireless connection so we had no problem getting it hooked to mine, however, my husband is trying to hook on with a Belkin router. The router appears to be reading that the Verizon service is there but when he goes to connect to the internet it says it won't connect. We've tried resetting the router and restarting his computer. It did not fix the problem.
View 3 Replies View Related