i can't get my belkin wireless f5d6231-4 to connect to the internet I hooked up my router and i go to http://192.168.2.1 and it says that it is connected but when i click on firefox it says no internet connection or The connection has timed out. I hqave a cable modem i dont know if that is the reason
View 1 RepliesI've just replaced my crappy TalkTalk router with my Belkin F5D9630-4 (v1001) to try and give myself a bit more wireless coverage in my flat. No matter what I try I just can't get the router to connect to the Internet.I've updated the router to the most recent firmware, and entered the following settings in my setup for the router:[CODE]
View 11 Replies View RelatedEverytime i plug the cable into my PC it doesn't detect it and the helper says to insert an ethernet cable.When I go to network sharing centre and check my connections it says network adaptor unplugged.im using wireless at the moment.My pc is a packard bell ipower x9810. it was windows vista but i upgraded to windows 7, i checked the packard bell website and can't find any networking adaptors. I have also checked device manager and it says - Belkin N+ wireless USB adapter #4 NVIDIA nForce 10/100/1000 Mbps Ethernet. there is no yellow exclamation mark.
View 17 Replies View RelatedWireless Adapter D600 USB needs to connect to the internet to finish installing... Problem is, I bought it because I can't get my ethernet port to work on my desktop. It worked find in Windows 7, but Windows 8 needs more information.
View 1 Replies View RelatedWe recently switched from ATT to Comcast in our house so we needed a new router since 2wire won't work with the Comcast modem. So we installed the router - no problems. Its been working great for about 3 weeks now, but yesterday when I tried to get on, it said the router had "no internet access" and I haven't been able to get it to work since.I have restarted the router, the modem, and my computer several times and reset the router to factory settings to no avail. I thought it might be a problem with comcast (maybe the storms knocked something out) but the modem is working fine; TV and phones still work and all of the lights on the modem box (power, DS, US, Online, ect.) are still on. I called comcast and they said they have registered no issues in the area.Right now I'm connected to the internet through the modem. I've tried everything I can think of[CODE]
View 10 Replies View RelatedI have unplugged everything and restarted everything in the correct order. I have connectivity to the modem if I plug ethernet cable into cable modem, but cannot get any connectivity if I plug into the wireless router and then into the cable modem. I am using a desktop computer and only use the wireless modem for my phones wi-fi.
View 2 Replies View RelatedI just installed a band new copy of xp on my system and I cannot connect to the internet! I'm connected via Ethernet to my Belkin n600 HD and whenever I go try to follow the steps via Microsoft [Go into Network Connections > Create a New Connection > Connect to the Internet > Set up my connection manually > Connect using a broadband connection that requires a user name and password] It just brings up the old school dial up vpn style thing and never connects to the net. Secondly I tried to install the Belkin software but it just has errors trying to establish a connection with it. The Internet is working fine, I have 5 laptops connected to it.
View 3 Replies View RelatedMy Belkin wireless usb network adapter isn't connecting to the internet. The router and everything is fine as other computers in the house are working. It's just one desktop pc that isn't connecting.Our internet was running slower than it should and that was because we had too many wires and so in order to speed it up we decided to use a wireless connection instead of an ethernet cable.The problem seems to be that the adapter just isn't connecting. The little icon showing the status of the connection keeps going back and forth from no connection to attempting to connect.
View 14 Replies View RelatedI have a belkin n300 and it whilst the modem itself is showing a static blue light, its coming up as an explanation mark on the wifi symbol on my macbook. This has been happening since yesterday when I was fiddling around with the settings on the IP address (192.168.2.1) to get the printer to work wirelessly which it did once then the wifi network went down.
View 1 Replies View RelatedI havent been able to connect to the internet with my wireless Belkin N150 router in 2 days! I have tried everything. I have done everything on this website and it still will not get on the internet. My modem works fine.
View 3 Replies View RelatedI recently bought a router so I could connect my Toshiba laptop to the internet. After I connected the ethernet cable to the router and plugged everything in, I installed the program from the CD that it came with. After the whole process, it says "You are now connected to the internet!". Yeah well when I try to get on the internet, it suddenly takes the connection off. On my wifi status, it says it's not connected anymore. When I try to connect again, it says I'm connected, although if I get on internet explorer, it takes off the connection again. Though when it is connected, it says no internet connection available although I am connected to the router. So basically, I'm connected to the router, but not the router to the internet.
View 4 Replies View RelatedI recently bough a belkin router (Share N300) but it just wont connect to the internet.My setup is as follows:ADSL -> Modem -> Router -> PCThe internet works fine when I connect it directly to my PC (via the modem), and other PCs too.So no issue of MAC address lockdown.I've tried connecting through static mode with the data from ipconfig /all, but it still doesn't work.I've even installed DD WRT and Tomato to no avail.
View 2 Replies View RelatedI have a N600 router. Yesterday, for the first time, I was unable to connect to the internet from my TV. It keeps saying network connection failed. I have unplugged the router and modem several times and that does not work. When I check the various wireless systems available (on the TV screen) I see mine there but it will not connect. At one point I did see something that said ethernet cable disconnected, but I checked and the cable is connected.
View 4 Replies View RelatedJust installed N600 router. Works for my Windows 7 PC and my Android phone. Does not work with my Windows VISTA PC. It connects to the Router ok, but does not connect with the Internet. Also says UNIDENTIFIED NETWORK. What am I missing?
View 1 Replies View RelatedCan the N150 be set up so that it just runs a private network - not connect to the internet? The auto-setup doesn't seem to work without a modem attached to it and I don't want it to be hooked up to the outside world, just a few computers and a NAS device on a private net.
View 1 Replies View RelatedI believe we accidentally changed the NAT on our wireless g MIMO F5D9230-4 router. Now only one laptop is actually connecting to the Internet, but it looks like our network isn't secure anymore. Our 2nd laptop is connected wirelessly to the router, but not the Internet. Our iPhones and iPad are not connecting at all.
View 1 Replies View Relatedmy Belkin routers wireless wont work. I tried unplugging it, resetting it, but nothing working. Ethernet is working fine, but I need wireless back ASAP.
View 1 Replies View RelatedI recently had trouble with my Comcast Xfinity internet service and called to have them send a refresh signal. I was up and running again with my ethernet, but my wireless service using a Belkin N150 wireless router hasn't worked.From everything I had read I needed to do a hard reset of the Belkin N150 router and then reconfigure it's settings. Well I did the hard reset and power cycled everything, the modem, computer and router. I then plugged in everything again and connected the modem to the WAN on the router with one cable, and the computer to the LAN on the router with another cable. (I am using a Macbook Pro operating with Mac OSX). Now I cannot connect to the url...to configure the settings on the router at all!
I think the problem has something to do with my IP address. I opened the network settings and saw that my IP address is 50.138.25.x while my Subnet Mask is 255.255.254.0 and the router is being listed as 50.138.24.x. How to change this IP address to get my router connected or could it be another problem?
I've got a Belkin G wireless router.I've got my Vaio with windows 7 , my other emachines with vista and another acer laptop in the house also on vista/All laptops can connect to the router and internet fine but when I password protect the WI-FI the ACER aspire won't connect to the router, while the other 2 and also a ps3 all connect with the password no problems.
View 1 Replies View RelatedI have a belkin N600 I believe and I ran the ipconfig/all and got this
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:UsersMichael>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Nero
Primary Dns Suffix . . . . . . . :
[code]....
also every other device I have can connect except one laptop, ipod, printer, xbox360 all connect just fine. and I have tried iprelease and renew.
I have just purchased and successfully installed a wireless Belking router and although my pc connects perfectly my daughter cannot connect to the same router even with the correct security codes, what are we doing wrong
View 1 Replies View RelatedMy IBM Thinkpad will not connect to our secure wireless Belkin router
View 1 Replies View RelatedI have had my laptop for over a year and it usually connects fine but two days ago I turned it on and it simply won't pick up on the signal coming from my router. I have a computer and another laptop connected to this same router and they are both working fine. It just says that there are no connections available even though the router is on and showing up on the other two machines. The router is a Belkin and the laptop a Dell, Windows 7.
View 7 Replies View RelatedI hav bsnl broadband connection in my home.... I connected a tplink wired for browsing...I also have a belkin wireless router..... I connected those routers.... And only wired communication is possible
View 7 Replies View RelatedFor a while now my girlfriend has been having problems trying to connect to her school website (my.pitt.edu) with the belgin g wireless router. It used to work a few months ago, tried to fix it then gave up. The only way she can access the site and do her school work from home is it she directly connects from the modem to the pc, but that takes internet away from the other pc in the house.I read a few sites months ago that it could be the school banned the routers IP, she called the school and they said it wasn't banned and that it might be a firewall issue. We tried disabling the firewall on the router and the pc but still nothing.
View 1 Replies View RelatedI have the linksys EA4500 now for a few hours and its pissing me off.with my old linksys i got a wireless connection to my Belkin Home Base.this is a usb wifi station.in this usb station there is a seneye. this is a machine to protect my reef tank.i cant make a wireless connection to my Belkin home base..
View 1 Replies View Relatedi have a belkin wireless router F6D4230-4. the "wired" and "router" lights are green but the "wireless", "modem", and "internet" lights won't come on. when they do, its red. the router is connected but won't pick up in any other rooms or on our phones.
View 1 Replies View RelatedI can't seem to get my Canon MG5220 Wireless Printer to connect to my Belkin N150 wireless router. The printer sees the belkin wireless router network name but cannot connect to it( after entering the correct security key). It worked fine with a previous wireless router. My desktop PC is connected to the belkin router via direct ethernet, and I want to be able to access my wireless printer which is located in another room from my PC. I think I remember reading that the canon mg5220 may not support WPA2 security, but Its only a year old and would prefer not to regonfigure my router's security setting. how I can get this printer to connect to my router? Any other ways to access this printer from my PC which is connected to LAN via ethernet?
View 3 Replies View RelatedI have a 3 story townhouse and want to have one n600 connected to my modem on the 3rd floor and then have the other downstairs connected through wireless to the one upstairs. I have seen lyncsys will do this but will the belkins?
View 1 Replies View Relatedmy netgear wireless router cannot see my n300 usb adapter. it shows as working in my device manager, but the netgear router says wireless not connected. when installing the adapter it said that windows has an icon to the left of the taskbar that i can click on and ask to join a network, which it didnt. it just showed network and an option to open network and sharing center, which i did. there were no wireless networks that showed available for me to log into with the adapter
View 4 Replies View Relatedso my xbox cannot connect to my router via wifi..the password has been tried and tried and restarted and to no avail.. i look towards my model F6d4230-4 and the light labeled "wireless" is flashing red. and yet my laptop connection is just fine. how do i fix the flashing red "wireless light" on my model: f6d4230
View 1 Replies View RelatedI cannot get my belkin n150 wireless router to connect to my laptop or ipad - wireless connection was working but stopped - so i attempted to re-configure the ip protocols on the router using the 198.168.2.1/ password - changed the ip setting on the belkin page but did not reset or set address (DHCP).
View 1 Replies View RelatedI have a Dell Inspiron 1525 laptop. It will not connect wireless to my Belkin N150. It use to, then one day it quit. I have an HP laptop and it connects wireless just fine. So I don't think it is the router. I have tried to reinstall the router. And the PC tells me there is a network available, but it will not connect. My question is... Can the wifi card be bad? Is there a key combination that might have been put in by accident?
View 1 Replies View Related