Belkin Routers :: F6D4230-4 - Can't Connect Wireless To Other Devices
Oct 15, 2012
i have a belkin wireless router F6D4230-4. the "wired" and "router" lights are green but the "wireless", "modem", and "internet" lights won't come on. when they do, its red. the router is connected but won't pick up in any other rooms or on our phones.
so my xbox cannot connect to my router via wifi..the password has been tried and tried and restarted and to no avail.. i look towards my model F6d4230-4 and the light labeled "wireless" is flashing red. and yet my laptop connection is just fine. how do i fix the flashing red "wireless light" on my model: f6d4230
I have xfinity internet with a comcast rented modem connected to a personally owned belkin router. I can successfully connect to the internet directly from the modem or if I connect to the modem to the router and then to my computer via ethernet cable. I cannot for the life of me connect wirelessly with any devices. The router previously worked when it was hooked up to comcast internet, but it was moden->router->my router. When I connect wirelessly on my Windows 7 laptop, it says I connect and that there is internet access. But when I try to load a page it takes me direclty to this website: url.. Comcast says that it is my router that needs configuring properly with xfinity and wants to charge me $39 to provide this wonderful service.
Router: Belkin Model F6D4230-4 v1 with firmware F6D4230-4_WW_1.00.03
Have a Belkin F6D4230-4 Version 3, both times we have stayed here we have noticed the same issue, we can connect to the router, but after a while it throws everything offline, and then you will see the orange light on the front of the router flashing. I usually have to reboot the router to get it to come back online. I did check the firmware version and it is the latest version 3.0 something, but it did say it was the latest?
I recently got a Belkin N150 Enhanced Router Model F6D4230-4 V1. I upgraded it to the recent firmware.
I use it NOT to access internet, but only to hook up my desktop computer with my laptop and my tablet PC. I use Win7 Ultimate on both computers. I configured a Win7 home network and I managed to access shared files between the 3 devices.
However, the speed is very very low, not going over 1.5 MB per second , sometimes even less, although the signal strength is the maximum (54).
The distance between the laptop and the desktop is only 4-5 meters, in the same room. My laptop is HP Compaq 6710b which has what seems to be a "Intel(R) PRO/Wireless 3945ABG Network Connection" .
Transfer speed is the same whether transferring from or to the laptop. I configured the laptop according to the instructions in the manual.
My main networking device is the Ericsson T073G HGU ONT, and when I am connecting to the network through the Ethernet there are no problems. However when I connect my Belkin F6D4230-4 router to it (through cable) my router cannot recognize the modem.I have tried literally everything.
my belkin 5909 router does not see wireless devices. It worked fine until about a week ago. Now, using the correct password - device sees router, but can't log on. I get an "incorrect password" message. I can access my router to make changes with wired connection. Wireless does not work.
My router had two problems I was able to fix one after applying the firmware update I found on this site. That was concerned with dropping network connections. I'm left with the router not recognizing devices I plug into the USB port. Plug N Play doesn't give a sound, My Computer doesn't show it and I dont see it in Device manager. I tried connecting A Seagate harddrive and a Scandisk FOB.
Router: F7D8301 v1 (firmware is up to date)I recently plugged a 2tb external hdd into one of the usb ports of the router. I have the video mover box checked and when it is, I can see the LaCie hard drive under network locations drive z in My Computer (Windows 7). I can open it and explore it, and see the media on the drive. But when I use one of the DLNA devices in my house (Vizio smart tv, Roku, and PS3) the only drive that shows up is the router's root file "Play N600 HD Dual video oot" not the LaCie drive or any of the contents. Is there any way to share the contents of the USB drive with these devices?
I purchased the Belkin N600DB, but I can't seem to find a way to reserve IP addresses for my connected devices. I need to run a server through the router, but (naturally) it keeps changing my local IP address. I cannot find the reservation utility.
I have a Belkin Play N600 HD router. Does it have the capability to let me assign fixed IP addresses to devices like printers, NAS drives, and cameras so I know where they are?
This model is FK91105v1. It is great with our ten different devices (possibly even a dozen?), but it continues to disconnect a Kindle Fire - that used to connect with no problem - evidently upon acquisition of a newer Kindle Fire. As long as MAC Filtering is not enabled, then there shouldn't be an issue of a "white list" - which the Kindle manual suggests as a solution ("If ... filtering is enabled, ensure your Kindle's MAC address is added to your router's white list in your network settings"). (I did figure out how to go to the network address, but was mostly flumoxed from there)
I have N600 HD Wireless dual band N Router. have successfully installed the router on wireless mode, however I have the following problem in accessing the storage devices connected to the Router.I can see the storage devices connected to the Router in the "Belkin USB Print and Storage center", but when I double click to browse the devices, it does not open up.
I have a 3 story townhouse and want to have one n600 connected to my modem on the 3rd floor and then have the other downstairs connected through wireless to the one upstairs. I have seen lyncsys will do this but will the belkins?
my netgear wireless router cannot see my n300 usb adapter. it shows as working in my device manager, but the netgear router says wireless not connected. when installing the adapter it said that windows has an icon to the left of the taskbar that i can click on and ask to join a network, which it didnt. it just showed network and an option to open network and sharing center, which i did. there were no wireless networks that showed available for me to log into with the adapter
I cannot get my belkin n150 wireless router to connect to my laptop or ipad - wireless connection was working but stopped - so i attempted to re-configure the ip protocols on the router using the 198.168.2.1/ password - changed the ip setting on the belkin page but did not reset or set address (DHCP).
I have decided to buy belkin n600 router. my question is can i connect Belkin wireless range extender n300 to belkin n 600 for beater coverage. is this possible ? if possible how many extender i can connect to the router and also can i connect extender with wire and wireless.
Wireless Adapter D600 USB needs to connect to the internet to finish installing... Problem is, I bought it because I can't get my ethernet port to work on my desktop. It worked find in Windows 7, but Windows 8 needs more information.
A Telindus 1421 SHDSL Router and a Sagem F@st 1500WG wireless adsl router.The question is: Can i connect this two devices directly over the adsl port and share networks on each side of each of the devices?
I have 3 laptops, 2 tivos, wii, ipad, i touch, etc..... how many items can connect to one router without drops outs? My internet keeps dropping off since my last device connected to my wireless home network and we have to keep hitting the reset button. Do different routers support more devices than others?
All of a sudden my laptop, android phone and blu ray player (all wireless devices) can't communicate with my wired devices (marantz receiver and samsung tv). Everything still connects to the internet independently but i can't for instance play music from my wireless laptop to my wired marantz receiver. I had no trouble with this last week and didn't change anything (that I'm aware of) I did get Verizon to switch out my router but it didn't solve anything. My wife's computer also cannot connect to wired devices. Lastly, if I connect my laptop with via ethernet cable it sees wired devices fine. I tried shutting off windows firewall but didn't work. I have no other firewall/virus software installed. I can ping to all devices (wired and wireless) from my laptop.
In my house...I have one router upstairs (Belkin F5D8236-4) and great signal upstairs...downstairs signal is not so swift and sometimes, I can't even get a signal. So I thought let me go purchase a router (router # 2) and set it up downstairs and see if that will improve the signal of my Belkin. The 2nd router I purchased is a Belkin N150 (I thought buy 2 Belkins...maybe they can communicate better?). What I need to know is how do I connect the Belkin N150, to my Belkin F5.. and just use it to strengthen my signal to my downstairs part of the house?
I was trying for hours to connect the USB Hard Drive of 3TB (My Book WD 3TB) in the USB port A and B of the router then the router won't reconize. I Have another the same model but different capacity and work excellent (My Book WD 2TB). What I can I do in order to use my hard drive in my network?